纳米受限下溶质水化结构的分子模拟

利用分子动力学模拟研究了五种不同种类的溶质分子(K+, Mg2+, Cl-, K-和K0)在直径为0.60-1.28 nm的纳米碳管内的水化结构. 模拟结果揭示了单电荷溶质、双电荷溶质和中性溶质在受限条件下具有不同的水化行为. 单价溶质的配位数只有在直径不大于0.73 nm的纳米碳管内才会明显减少. 和带有电荷的溶质不同, 中性溶质的配位数对纳米碳管直径的改变非常敏感, 并且随着管径的减小而迅速减少. 模拟结果还表明带单价正电荷的溶质(K+)第一配位层水分子的取向结构会随着纳米碳管直径的改变发生变化, 而其他溶质配位层取向结构在本文所涉及的纳米碳管内都几乎和体相中一致. 在直径大于1.0 nm的纳米碳管中, K+的配位层取向结构有序度随着管径的减小而单调下降, 但是在直径小于1.0 nm的纳米碳管中, 随着碳管管径的减小而迅速上升. 在两个最窄的纳米碳管内, 其结构有度甚至高于体相. 双电荷溶质的水化结构在本文所研究的碳管直径范围内和体相完全一致, 即使在直径只有0.6 nm的碳管内也无任何改变.     

Structural and dynamical properties of the Hg2+ aqua ion: a molecular dynamics study

Molecular dynamics simulations of the Hg2+ ion in aqueous solution have been carried out using an effective two-body potential derived from quantum mechanical calculations. A stable heptacoordinated structure of the Hg2+ first hydration shell has been observed and confirmed by extended X-ray absorption fine structure (EXAFS) experimental data. The structural properties of the Hg2+ hydration shells have been investigated using radial and angular distribution functions, while the dynamical behavior has been discussed in terms of reorientational correlation functions, mean residence times of water molecules in the first and second hydration shells, and self-diffusion coefficients. The effect of water-water interactions on the Hg2+ hydration properties has been evaluated using the SPC/E and TIP5P water models.     

Influence of concentration and anion size on hydration of H+ ions and water structure

Neutron diffraction experiments with hydrogen isotope substitution on aqueous solutions of HCl and HBr have been performed at concentrations ranging from 1:17 to 1:83 solute per water molecules, at ambient conditions. Data are analyzed using the empirical potential structure refinement technique in order to extract information on both the ion hydration shells and the microscopic structure of the solvent. It is found that the influence of these solutes on the water structure is less concentration dependent than that of salts or hydroxides. Moreover protons readily form a strong H-bond with a water molecule upon solvation, at all proportions. The majority of them is also bonded via a longer bond to another water molecule, giving a prepeak in the g(OwOw). At high solute concentration, the second water molecule may be substituted by the counterion. In particular at solute concentrations of the order of 1:17 or higher, all protons have an anion within a distance of 4.5 A.     

Aqueous solutions of divalent chlorides: ions hydration shell and water structure

By combining neutron diffraction and Monte Carlo simulations, we have determined the microscopic structure of the hydration ions shell in aqueous solutions of MgCl(2) and CaCl(2), along with the radial distribution functions of the solvent. In particular the hydration shell of the cations, show cation specific symmetry, due to the strong and directional interaction of ions and water oxygens. The ions and their hydration shells likely form molecular moieties and bring clear signatures in the water-water radial distribution functions. Apart from these signatures, the influence of divalent salts on the microscopic structure of water is similar to that of previously investigated monovalent solutes, and it is visible as a shift of the second peak of the oxygen-oxygen radial distribution function, caused by distortion of the hydrogen bond network of water.     

Equatorial and apical solvent shells of the UO2 2+ ion

First principles molecular dynamics simulations of the hydration shells surrounding UO(2)(2+) ions are reported for temperatures near 300 K. Most of the simulations were done with 64 solvating water molecules (22 ps). Simulations with 122 water molecules (9 ps) were also carried out. The hydration structure predicted from the simulations was found to agree with very well-known results from x-ray data. The average U=O bond length was found to be 1.77 A. The first hydration shell contained five trigonally coordinated water molecules that were equatorially oriented about the O-U-O axis with the hydrogen atoms oriented away from the uranium atom. The five waters in the first shell were located at an average distance of 2.44 A (2.46 A, 122 water simulation). The second hydration shell was composed of distinct equatorial and apical regions resulting in a peak in the U-O radial distribution function at 4.59 A. The equatorial second shell contained ten water molecules hydrogen bonded to the five first shell molecules. Above and below the UO(2)(2+) ion, the water molecules were found to be significantly less structured. In these apical regions, water molecules were found to sporadically hydrogen bond to the oxygen atoms of the UO(2)(2+), oriented in such a way as to have their protons pointed toward the cation. While the number of apical waters varied greatly, an average of five to six waters was found in this region. Many water transfers into and out of the equatorial and apical second solvation shells were observed to occur on a picosecond time scale via dissociative mechanisms. Beyond these shells, the bonding pattern substantially returned to the tetrahedral structure of bulk water.     

Long-range hydrogen-bond structure in aqueous solutions and the vapor-water interface

There is a considerable disagreement about the extent to which solutes perturb water structure. On the one hand, studies that analyse structure directly only show local structuring in a solute's first and possibly second hydration shells. On the other hand, thermodynamic and kinetic data imply indirectly that structuring occurs much further away. Here, the hydrogen-bond structure of water around halide anions, alkali cations, noble-gas solutes, and at the vapor-water interface is examined using molecular dynamics simulations. In addition to the expected perturbation in the first hydration shell, deviations from bulk behavior are observed at longer range in the rest of the simulation box. In particular, at the longer range, there is an excess of acceptors around halide anions, an excess of donors around alkali cations, weakly enhanced tetrahedrality and an oscillating excess and deficiency of donors and acceptors around noble-gas solutes, and enhanced tetrahedrality at the vapor-water interface. The structuring compensates for the short-range perturbation in water-water hydrogen bonds induced by the solute. Rather than being confined close to the solute, it is spread over as many water molecules as possible, presumably to minimize the perturbation to each water molecule.     

Structure and dynamics of phosphate ion in aqueous solution: an ab initio QMCF MD study

A simulation of phosphate in aqueous solution was carried out employing the new QMCF MD approach which offers the possibility to investigate composite systems with the accuracy of a QMMM method but without the time consuming creation of solute-solvent potential functions. The data of the simulations give a clear picture of the hydration shells of the phosphate anion. The first shell consists of 13 water molecules and each oxygen of the phosphate forms in average three hydrogens bonds to different solvent molecules. Several structural parameters such as radial distribution functions and coordination number distributions allow to fully characterize the embedding of the highly charged phosphate ion in the solvent water. The dynamics of the hydration structure of phosphate are described by mean residence times of the solvent molecules in the first hydration shell and the water exchange rate.     

Thermal signature of hydrophobic hydration dynamics

Hydrophobic hydration, the perturbation of the aqueous solvent near an apolar solute or interface, is a fundamental ingredient in many chemical and biological processes. Both bulk water and aqueous solutions of apolar solutes behave anomalously at low temperatures for reasons that are not fully understood. Here, we use (2)H NMR relaxation to characterize the rotational dynamics in hydrophobic hydration shells over a wide temperature range, extending down to 243 K. We examine four partly hydrophobic solutes: the peptides N-acetyl-glycine-N'-methylamide and N-acetyl-leucine-N'-methylamide, and the osmolytes trimethylamine N-oxide and tetramethylurea. For all four solutes, we find that water rotates with lower activation energy in the hydration shell than in bulk water below 255 +/- 2 K. At still lower temperatures, water rotation is predicted to be faster in the shell than in bulk. We rationalize this behavior in terms of the geometric constraints imposed by the solute. These findings reverse the classical "iceberg" view of hydrophobic hydration by indicating that hydrophobic hydration water is less ice-like than bulk water. Our results also challenge the "structural temperature" concept. The two investigated osmolytes have opposite effects on protein stability but have virtually the same effect on water dynamics, suggesting that they do not act indirectly via solvent perturbations. The NMR-derived picture of hydrophobic hydration dynamics differs substantially from views emerging from recent quasielastic neutron scattering and pump-probe infrared spectroscopy studies of the same solutes. We discuss the possible reasons for these discrepancies.     

Structure and dynamics of the hydration shells of the Al3+ ion

First principles simulations of the hydration shells surrounding Al3+ ions are reported for temperatures near 300 degrees C. The predicted six water molecules in the octahedral first hydration shell were found to be trigonally coordinated via hydrogen bonds to 12 s shell water molecules in agreement with the putative structure used to analyze the x-ray data, but in disagreement with the results reported from conventional molecular dynamics using two-and three-body potentials. Bond lengths and angles of the water molecules in the first and second hydration shells and the average radii of these shells also agreed very well with the results of the x-ray analysis. Water transfers into and out of the second solvation shell were observed to occur on a picosecond time scale via a dissociative mechanism. Beyond the second shell the bonding pattern substantially returned to the tetrahedral structure of bulk water. Most of the simulations were done with 64 solvating water molecules (20 ps). Limited simulations with 128 water molecules (7 ps) were also carried out. Results agreed as to the general structure of the solvation region and were essentially the same for the first and second shell. However, there were differences in hydrogen bonding and Al-O radial distribution function in the region just beyond the second shell. At the end of the second shell a nearly zero minimum in the Al-O radial distribution was found for the 128 water system. This minimum is less pronounced minimum found for the 64 water system, which may indicate that sizes larger than 64 may be required to reliably predict behavior in this region.     

Solvation of calcium ions in methanol-water mixtures: molecular dynamics simulation

Molecular dynamics simulations of CaCl2 solutions in water and methanol-water mixtures, with methanol concentrations of 5, 10, 50, and 90 mol %, at room temperature, have been performed. The methanol and water molecules have been modeled as flexible three-site bodies. Solvation of the calcium ions has been discussed on the basis of the radial and angular distribution functions, the orientation of the solvent molecules, and their geometrical arrangement in the coordination shells. Analysis of the H-bonds of the solvent molecules coordinated by Ca2+ has been done. Residence time of the solvent molecules in the coordination shell has been calculated. The preferential hydration of the calcium ions has been found over the whole range of the mixture composition. The water concentration in the first and second coordination shells of Ca2+ significantly exceeds the water content in the solution, despite the very similar interaction energy of the calcium ion with water and methanol. In aqueous solution and methanol-water mixtures, the first coordination shell of Ca2+ is irregular and long-living. The solvent molecules prefer the anti-dipole arrangement, but, in aqueous solutions and water-rich mixtures, the water molecules in the primary shell have only one H-bonded neighbor.     

Hydration of sodium, potassium, and chloride ions in solution and the concept of structure maker/breaker

Neutron diffraction data with hydrogen isotope substitution on aqueous solutions of NaCl and KCl at concentrations ranging from high dilution to near-saturation are analyzed using the Empirical Potential Structure Refinement technique. Information on both the ion hydration shells and the microscopic structure of the solvent is extracted. Apart from obvious effects due to the different radii of the three ions investigated, it is found that water molecules in the hydration shell of K+ are orientationally more disordered than those hydrating a Na+ ion and are inclined to orient their dipole moments tangentially to the hydration sphere. Cl- ions form instead hydrogen-bonded bridges with water molecules and are readily accommodated into the H-bond network of water. The results are used to show that concepts such as structure maker/breaker, largely based on thermodynamic data, are not helpful in understanding how these ions interact with water at the molecular level.     

Be2+ hydration in concentrated aqueous solutions of BeCl2

Neutron diffraction experiments were carried out on concentrated aqueous solutions of beryllium chloride at three concentrations: 1.5, 3, and 6 molal. By working with a specific ("null") mixture of heavy water (D2O) and water (H2O), information on the local structure around Be2+ ions was extracted directly. For all three BeCl2 solutions, the results show that the Be2+ ion has a well-defined 4-fold coordination shell that is dominated by oxygen atoms. There is also a relatively small probability (10-15%) that there are direct contacts between Be2+ and Cl- at a distance of approximately 2.2 angstroms. The oxygen atoms of the highly structured Be2+ first hydration shell are found to be situated at 2.6 angstroms apart, and form a pyramidal structure, in agreement with recent MD simulation results. The Cl- ions have approximately seven oxygen atoms (water molecules) in their hydration shells sited at 3.2 angstroms.     

How hydrophobic buckminsterfullerene affects surrounding water structure

The hydrophobic hydration of fullerenes in water is of significant interest as the most common Buckminsterfullerene (C60) is a mesoscale sphere; C60 also has potential in pharmaceutical and nanomaterial applications. We use an all-atom molecular dynamics simulation lasting hundreds of nanoseconds to determine the behavior of a single molecule of C60 in a periodic box of water, and compare this to methane. A C60 molecule does not induce drying at the surface; however, unlike a hard sphere methane, a hard sphere C60 solute does. This is due to a larger number of attractive Lennard-Jones interactions between the carbon atom centers in C60 and the surrounding waters. In these simulations, water is not uniformly arranged but rather adopts a range of orientations in the first hydration shell despite the spherical symmetry of both solutes. There is a clear effect of solute size on the orientation of the first hydration shell waters. There is a large increase in hydrogen-bonding contacts between waters in the C60 first hydration shell. There is also a disruption of hydrogen bonds between waters in the first and second hydration shells. Water molecules in the first hydration shell preferentially create triangular structures that minimize the net water dipole near the surface near both the methane and C60 surface, reducing the total energy of the system. Additionally, in the first and second hydration shells, the water dipoles are ordered to a distance of 8 A from the solute surface. We conclude that, with a diameter of approximately 1 nm, C60 behaves as a large hydrophobic solute.     

Amino acid side chain interactions in the presence of salts

The effects of salt on the intermolecular interactions between polar/charged amino acids are investigated through molecular dynamics simulations. The mean forces and associated potentials are calculated for NaCl salt in the 0-2 M concentration range at 298 K. It is found that the addition of salt may stabilize or destabilize the interactions, depending on the nature of the interacting molecules. The degree of (de)stabilization is quantified, and the origin of the salt-dependent modulation is discussed based upon an analysis of solvent density profiles. To gain insight into the molecular origin of the salt modulation, spatial distribution functions (sdf's) are calculated, revealing a high degree of solvent structuredness in all cases. The peaks in the sdf's are consistent with long-range hydrogen-bonding networks connecting the solute hydrophilic groups, and that contribute to their intermolecular solvent-induced forces. The restructuring of water around the solutes as they dissociate from close contact is analyzed. This analysis offers clues on how the solvent structure modulates the effective intermolecular interactions in complex solutes. This modulation results from a critical balance between bulk electrostatic forces and those exerted by (i) the water molecules in the structured region between the monomers, which is disrupted by ions that transiently enter the hydration shells, and (ii) the ions in the hydration shells in direct interactions with the solutes. The implications of these findings in protein/ligand (noncovalent) association/dissociation mechanisms are briefly discussed.     

Molecular simulation study of temperature effect on ionic hydration in carbon nanotubes

Molecular dynamics simulations have been performed to investigate the hydration of Li(+), Na(+), K(+), F(-), and Cl(-) inside the carbon nanotubes at temperatures ranging from 298 to 683 K. The structural characteristics of the coordination shells of ions are studied, including the ion-oxygen radial distribution functions, the coordination numbers, and the orientation distributions of the water molecules. Simulation results show that the first coordination shells of the five ions still exist in the nanoscale confinement. Nevertheless, the first coordination shell structures of cations change more significantly than those of anions because of the preferential orientation of the water molecules induced by the carbon nanotube. The first coordination shells of cations are considerably less ordered in the nanotube than in the bulk solution, whereas the change of the first coordination shell structures of the anions is minor. Furthermore, the confinement induces the anomalous behavior of the coordination shells of the ions with temperature. The first coordination shell of K(+) are found to be more ordered as the temperature increases only in the carbon nanotube with the effective diameter of 1.0 nm, implying the enhancement of the ionic hydration with temperature. This is contrary to that in the bulk solution. The coordination shells of the other four ions do not have such behavior in the carbon nanotube with the effective diameter ranging from 0.73 to 1.00 nm. The easier distortion of the coordination shell of K(+) and the match of the shell size and the nanotube size may play roles in this phenomenon. The exchange of water molecules in the first coordination shells of the ions with the solution and the ion diffusion along the axial direction of the nanotube are also investigated. The mobility of the ions and the stability of the coordination shells are greatly affected by the temperature in the nanotube as in the bulk solutions. These results help to understand the biological and chemical processes at the high temperature.     

A molecular dynamics study of the dielectric properties of aqueous solutions of alanine and alanine dipeptide

Molecular dynamics simulations were used to compute the frequency-dependent dielectric susceptibility of aqueous solutions of alanine and alanine dipeptide. We studied four alanine solutions, ranging in concentration from 0.13-0.55 mol/liter, and two solutions of alanine dipeptide (0.13 and 0.27 mol/liter). In accord with experiment we find a strong dielectric increment for both solutes, whose molecular origin is shown to be the zwitterionic nature of the solutes. The dynamic properties were analyzed based on a dielectric component analysis into solute, a first hydration shell, and all remaining (bulk) waters. The results of this three component decomposition were interpreted directly, as well as by uniting the solute and hydration shell component to a "suprasolute" component. In both approaches three contributions to the frequency-dependent dielectric properties can be discerned. The quantitatively largest and fastest component arises from bulk water [i.e., water not influenced by the solute(s)]. The interaction between waters surrounding the solute(s) (the hydration shell) and bulk water molecules leads to a relaxation process occurring on an intermediate time scale. The slowest relaxation process originates from the solute(s) and the interaction of the solute(s) with the first hydration shell and bulk water. The primary importance of the hydration shell is the exchange of shell and bulk waters; the self-contribution from bound water molecules is comparatively small. While in the alanine solutions the solute-water cross-terms are more important than the solute self-term, the solute contribution is larger in the dipeptide solutions. In the latter systems a much clearer separation of time scales between water and alanine dipeptide related properties is observed. The similarities and differences of the dielectric properties of the amino acid/peptide solutions studied in this work and of solutions of mono- and disaccharides and of the protein ubiquitin are discussed.     

Nonideality in diffusion of ionic and hydrophobic solutes and pair dynamics in water-acetone mixtures of varying composition

We have performed a series of molecular dynamics simulations of water-acetone mixtures containing either an ionic solute or a neutral hydrophobic solute to study the extent of nonideality in the dynamics of these solutes with variation of composition of the mixtures. The diffusion coefficients of the charged solutes, both cationic and anionic, are found to change nonmonotonically with the composition of the mixtures showing strong nonideality of their dynamics. Also, the extent of nonideality in the diffusion of these charged solutes is found to be similar to the nonideality that is observed for the diffusion and orientational relaxation of water and acetone molecules in these mixtures which show a somewhat similar changes in the solvation characteristics of charged and dipolar solutes with changes of composition of water-acetone mixtures. The diffusion of the hydrophobic solute, however, shows a monotonic increase with increase of acetone concentration showing its different solvation characteristics as compared to the charged and dipolar solutes. The links between the nonideality in diffusion and solvation structures are further confirmed through calculations of the relevant solute-solvent and solvent-solvent radial distribution functions for both ionic and hydrophobic solutes. We have also calculated various pair dynamical properties such as the relaxation of water-water and acetone-water hydrogen bonds and residence dynamics of water molecules in water and acetone hydration shells. The lifetimes of both water-water and acetone-water hydrogen bonds and also the residence times of water molecules are found to increase steadily with increase in acetone concentration. No maximum or minimum was found in the composition dependence of these pair dynamical quantities. The lifetimes of water-water hydrogen bonds are always found to be longer than that of acetone-water hydrogen bonds in these mixtures. The residence times of water molecules are also found to follow a similar trend.     

Hydrogen bond and residence dynamics of ion-water and water-water pairs in supercritical aqueous ionic solutions: dependence on ion size and density

We have carried out a series of molecular dynamics simulations to investigate the hydrogen bond and residence dynamics of X(-)-water (X=F, Cl, and I) and pairs in aqueous solutions at a temperature of 673 K. The calculations are done at six different water densities ranging from 1.0 to 0.15 g cm(-3). The hydrogen bonds are defined by using a set of configurational criteria with respect to the anion(oxygen)-oxygen and anion(oxygen)-hydrogen distances and the anion(oxygen)-oxygen-hydrogen angle for an anion(water)-water pair. The F(-)-water hydrogen bonds are found to have a longer lifetime than all other hydrogen bonds considered in the present study. The lifetime of Cl(-)-water hydrogen bonds is shorter than that of F(-)-water hydrogen bonds but longer than the lifetime of water-water hydrogen bonds. The lifetimes of I(-)-water and water-water hydrogen bonds are found to be very similar. Generally, the lifetimes of both anion-water and water-water hydrogen bonds are found to be significantly shorter than those found under ambient conditions. In addition to hydrogen bond lifetimes, we have also calculated the residence times and the orientational relaxation times of water molecules in ion(water) hydration shells and have discussed the correlations of these dynamical quantities with the observed dynamics of anion(water)-water hydrogen bonds as functions of the ion size and density of the supercritical solutions.     

Structure and dynamics of Au+ ion in aqueous solution: ab initio QM/MM MD simulations

Structure and dynamics of hydrated Au(+) have been investigated by means of molecular dynamics simulations based on ab initio quantum mechanical molecular mechanical forces at Hartree-Fock level for the treatment of the first hydration shell. The outer region of the system was described using a newly constructed classical three-body corrected potential. The structure was evaluated in terms of radial and angular distribution functions and coordination number distributions. Water exchange processes between coordination shells and bulk indicate a very labile structure of the first hydration shell whose average coordination number of 4.7 is a mixture of 3-, 4-, 5-, 6-, and 7-coordinated species. Fast water exchange reactions between first and second hydration shell occur, and the second hydration shell is exceptionally large. Therefore, the mean residence time of water molecules in the first hydration shell (5.6 ps/7.5 ps for t*= 0.5 ps/2.0 ps) is shorter than that in the second shell (9.4 ps/21.2 ps for t*= 0.5 ps/2.0 ps), leading to a quite specific picture of a "structure-breaking" effect.