Summary: Conjugated three‐ and four‐arm star polymers were successfully prepared by palladium catalyzed one‐pot Suzuki polycondensation of the multifunctional cores and an AB‐type monomer. The molecular weight of the star polymers could be controlled by the feed ratios of the monomers. The bromo end groups could be completely modified by fluorene mono boronic acid or triphenylamine mono boronic ester. The investigation of the optical, electrochemical, and thermal properties of the star polymers was also reported. All polymers exhibited good thermal stabilities and all the TPA‐capped polymers showed good hole‐transport abilities.
Preparation of three‐ and four‐arm star polyfluorences. 相似文献
The synthesis of new star‐shaped polymers, prepared by atom transfer radical polymerization of methyl methacrylate with tris(dialkylaminostyryl‐2,2′‐bipyridine) zinc(II) and iron(II) metalloinitiators, is reported. Their thermal and optical (absorption and emission) properties are discussed.
This review covers the literature concerning the modification of polysaccharides through controlled radical polymerizations (NMP, ATRP and RAFT). The different routes to well‐defined polysaccharide‐based macromolecules (block and graft copolymers) and graft‐functionalized polysaccharide surfaces as well as the applications of these polysaccharide‐based hybrids are extensively discussed.
A new anhydroribotrisaccharide monomer, A2B3LR ( 1 ), was synthesized and ROP was carried out to elucidate the polymerizability and to obtain oligosaccharide‐branched polysaccharides with defined structures. The new trisaccharide monomer was found to be polymerized readily with BF3 · OEt2 as a catalyst at ?40 °C to give a lactose‐branched polymer. Copolymerization with ADBR gave the corresponding copolymers in good yields. After removal of protective benzyl groups, D ‐lactose‐branched ribofuranans with free hydroxyl groups were obtained in good yields. The structure of polymers was analyzed by 1H, 13C, and two‐dimensional NMR measurements, suggesting that D ‐lactose‐branched ribofuranans had (1 → 5)‐α stereoregularity.
Phosphorescent conjugated polymers consisting of alternating p‐phenylene‐ethynylene and ‘para‐’ or ‘meta‐type’ Pt(II)‐salphen luminophore units have been synthesized. Side‐arms bearing different substituents (n‐alkoxy and acetylated‐sugar) have afforded contrasting emission properties that are attributed to the polymer conformation, extent of π‐stacking interactions and differences in chemical structure. Intriguing selectivity in luminescent sensing of metal ions has been observed.
Detection of the adduct radical by ESR spectroscopy and after‐effect ESR measurements of the adduct radical concentrations in the photosensitized polymerization of styrene (St) in the presence of dimers of α‐methylstyrene (MSD) and methyl methacrylate have revealed that the dominant mechanism of adduct radical loss changes from bimolecular termination to fragmentation as the temperature is increased beyond 90 °C for St/MSD.
The compounds 2‐thioxanthone‐thioacetic acid and 2‐(carboxymethoxy)thioxanthone, bimolecular photoinitiators for free radical polymerization, are synthesized and characterized. Their capability to act as initiators for the polymerization of methyl methacrylate was examined. The postulated mechanism is based on the intermolecular electron‐transfer reaction of the excited photoinitiator with the sulfur or oxygen atom of the ground state of the respective photoinitiator followed by decarboxylation. The resulting alkyl radicals initiate the polymerization.
A new semi‐analytical approach to model simultaneous chain scission and branching is described that assumes the separation of the scission and the branching problem. The required properties of the linear segments or primary polymers forming the branched architectures are found by a kinetic model. The general rules for the construction of branched architectures from populations of linear segments then lead to an analytical expression for the branching distribution and a semi‐analytical expression for the bivariate length/branching distribution. The method is applied to the scission of an initially branched polymer and subsequent terminal branching on scission points and activated terminal double bonds. Exact agreement is found with Monte Carlo sampling results.
An enzymatic tandem reaction is described in which the enzymes phosphorylase and Deinococcus geothermalis glycogen branching enzyme (Dg GBE) catalyze the synthesis of branched polyglucans from glucose‐1‐phosphate (G‐1‐P). Phosphorylase consumes G‐1‐P and polymerizes linear amylose while Dg GBE introduces branching points on the α‐(1 → 6) positions by reshuffling short oligosaccharides. The resulting branched polyglucans have an unusually high degree of branching of 11%.
The carbon nitride poly(triazine imide) with intercalated bromide ions is a layered, graphitic material of 2D covalently bonded molecular sheets with an exceptionally large gallery height of 3.52 Å due to the intercalated bromide anions. The material can be cleaved both mechanically and chemically into thin sheets and scrolls analogous to the carbon‐only systems graphite and graphene.
A branched copolymer containing a degradable polyperoxide linkage at a branching point was synthesized by the radical copolymerization of dienyl‐functionalized polystyrene and polyisoprene macromonomers with molecular oxygen. The ternary mixture of the branched copolymer and the macromonomers showed phase‐separated structure after annealing at 45 and 90 °C. The adjacent spacing of the phase‐separated structure was in the order of submicron to micrometer, which is larger than that of general microphase separated structures, due to the presence of homopolymers (macromonomers). Annealing at 110 °C induced thermal decomposition of the polyperoxide followed by in‐situ collapse and a drastic morphology change in the phase‐separated structure.
Hyperbranched polymers constitute a unique class of branched macromolecules, where structural complexity is complemented by relative ease of synthesis. The increasing interest in the study of these materials is due to their distinctive properties, inherently tied to their complex molecular architecture, and is augmented by the continual growth of applications like catalysis, viscosity modifiers, and sensors. We report a structural model for HBPs based on fractal scaling of both mass and connectivity. This model is shown to be of use in understanding small angle scattering data, especially in comparison with nuclear magnetic resonance spectroscopy for structural characterization.
Summary: We developed a facile approach to hyperbranched polymers by applying a superelectrophilic reaction within an A2 + B3 strategy. A significant reactivity difference between the intermediate and the starting material was utilized to avoid gelation in the A2 + B3 polymerization. A number of hyperbranched poly(arylene oxindole)s were achieved in a one‐step polymerization and characterized by NMR spectroscopy and gel permeation chromatography. Moreover, further modifications at the interior and exterior of the resulting polymers were explored as well.
Structure of the hyperbranched polymers produced using the A2 + B3 approach. 相似文献
The preparation of novel highly water‐soluble electrostatic complexes from C60‐anchored multi‐armed poly(acrylic acid)s and cationic porphyrin derivatives was demonstrated. The UV‐vis absorption and photoluminescence (PL) of these complexes show that the absorption of soret band exhibits a remarkable red shift and the emission of the Q band indicates an apparent quenching effect in comparison with that of the parent cationic porphyrin. These results imply a remarkable ground state and excited state interaction between the porphyrin ring and the C60 moiety.
A series of size‐controlled, cyclic poly(tetrahydrofuran)s ( of 4 400–8 600) that consist exclusively of the monomer, i.e., oxytetramethylene, unit ( I ) have been prepared in high yield through the metathesis polymer cyclization of a telechelic precursor having allyl groups, 1 , in the presence of a Grubbs catalyst, and the subsequent hydrogenation of the linking, i.e., 2‐butenoxy, unit in the presence of an Adams' catalyst (PtO2). A remarkable topology effect has subsequently been observed upon the isothermal crystallization of these two model polymers, showing distinctive spherulite growth rates and spherulite morphologies in comparison with the relevant linear poly(tetrahydrofuran) counterpart that has ethoxy end groups ( II ).
The use of decatungstate in combination with silanes to generate silyl radicals under green fluorescence bulb irradiation as well as sunlight exposure is described. The mechanisms are investigated by ESR and laser flash photolysis experiments. The high potential of this reaction is evidenced here when using a decatungstate/silane/diphenyl iodonium salt combination as an initiating system for the ring opening photopolymerization of epoxides.
This communication details the successful synthesis of low polydispersity core cross‐linked star (CCS) polymers via DPE‐mediated polymerisation. We demonstrate the ability to produce poly(methyl methacrylate) and poly(acrylonitrile) CCS polymers that are currently inaccessible via the two most common non‐metal‐based controlled radical polymerisation techniques (NMP and RAFT polymerisations).
Multicomponent phase change microfibers, which can storage and release thermal energy in a stepwise manner, are firstly prepared through a facile one‐step multifluidic compound‐jet electrospinning with temperature control. The multiresponsive effect benefits from a special multichannel tubular microstructure that could controllably encapsulate different phase change materials into the channels independently. Aside from the fabrication of multicomponent phase change microfibers, the melt multifluidic compound‐jet electrospinning is promising for applications related to microencapsulation and multifunctional material fields.
Summary: A novel semi‐interpenetrating polymer network (semi‐IPN) with photomechanical switching ability was developed by a cationic copolymerization of azobenzene‐containing vinyl ethers in a matrix of a linear polycarbonate (PC). The semi‐IPN film showed reversible deformation upon switching the UV irradiation on and off and responded with unprecedented rapidity. The photomechanical effect is attributed to a reversible change between the highly aggregated and dissociated states of the azobenzene groups.
The reversible UV response of the length of the semi‐IPN film at 25 °C. 相似文献
