Structural and morphological studies on Mn substituted ZnO nanometer‐sized crystals

Mn substituted ZnO nanocrystals synthesized by a co‐precipitation method. X‐ray diffraction (XRD) studies confirms the presence of wurtzite (hexagonal) crystal structure similar to un doped ZnO, suggesting that doped Mn ions go at the regular Zn sites. The lattice parameters a and c are increasing with increasing Mn content. The unit cell volume increases with increasing Mn concentration, indicating the homogeneous substitution of Mn²⁺ for the Zn²⁺. The lattice distortion parameter (ε_v) is evaluated from XRD data and found that it enhances as Mn content increases. Transmission electron microscopy photographs show that the size of the ZnO crystals is in the range of 20‐50 nm. The SAED pattern confirms the hexagonal and crystalline nature of the samples which are in agreement with X‐ray analysis. The chemical groups of the samples have been identified by FTIR studies (© 2011 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Preparation and investigation of (CuInSe2)x(2ZnSe)1‐x and (CuInTe2)x(2ZnTe)1‐x solid solution crystals

The (CuInSe₂)_x(2ZnSe)_1‐x and (CuInTe₂)_x(2ZnTe)_1‐x solid solution crystals prepared by Bridgman method and chemical vapor transport have been studied. The nature of the crystalline phases, the local structure homogeneity and composition of these materials have been investigated by X‐ray diffraction (XRD) and Electron Probe Microanalysis (EPMA) methods. The analysis revealed the presence of chalcopyrite‐sphalerite phase transition between 0.6 ≤ X ≤ 0.7. Lattice constants, value of σ position parameter and bond length between atoms were also calculated. It was found that the lattice parameters exhibit a linear dependence versus composition. The transmission spectra of solid solution crystals in the region of the main absorption edge were studied. It was established that the optical band gap of these materials changes non‐linearly with the X composition. (© 2004 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Optical and Photocatalytic properties of Mn‐doped CuO nanosheets prepared by hydrothermal method

Mn‐doped CuO nanosheets were prepared through a hydrothermal method to enhance their photocatalytic property. The structural and morphological features were monitored by using X‐Ray diffraction (XRD) and field emission scanning electron microscopy (FESEM) with energy dispersive spectroscopy (EDS). UV‐vis absorption spectra showed the enhance absorption performance both in UV and visible light region. The band gaps were also calculate and the minimum value was 1.25 eV. The photocatalytic activity was investigated by the degradation of methylene blue (MB), which indicated that the photoactivity of samples depended on the amount of Mn²⁺ incorporated into the CuO lattice. The improved performance of photocatalysts can be attributed to enhanced light absorption and lower electron‐hole recombination.     

Self‐template hydrothermal synthesis ZnS microspheres

Zinc sulfide (ZnS) microspheres were synthesized by a self‐template hydrothermal route using thiourea as sulphur source. The formation of these hollow spheres was mainly attributed to the oriented aggregation of ZnS nanocystals around the gas‐liquid interface between gas (H₂S, NH₃, or CO₂) and water followed by an Ostwald ripening process. The gas bubbles of H₂S, NH₃, or CO₂ produced during the reaction might play a soft‐template to form ZnS hollow microspheres. The products were characterized by X‐ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), transmission electron microscopy (TEM), high resolution transmission electron microscopy (HRTEM), selected area electron diffraction (SAED), electron diffraction (ED), and photoluminescence (PL). The crystal structure of prepared ZnS microspheres is hexagonal phase polycrystalline. The average microspheres diameter is 1.5 ‐ 6 µm. (© 2011 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Preparation and characterization of chemically deposited (Cd0.7‐Zn0.3)S:CdCl2,Gd nanocrystalline films

Nanocrystalline films of (Cd_0.7‐Zn_0.3)S:CdCl₂,Gd are prepared by chemical deposition technique on microscopic glass substrates with varied concentrations of capping agents thiophenol and methanol. The deposition is based on the principle of precipitation followed by condensation. Results of XRD, SEM, optical absorption spectra and photoluminescence emission spectra are presented. The crystalline nature of (Cd_0.7‐Zn_0.3)S:CdCl₂,Gd was found by XRD studies in which different diffraction peaks of CdS and ZnS are observed. The SEM micrographs show long tubes and irregular distributions of particles in presence of capping agents. The blue shift observed from optical absorption spectra in the present case indicates a quantization effect. Band gaps are also found to increase due to particle size reduction. The photoluminescence emission spectra show shift of peaks in the lower wavelength side due to reduction in particle size. The particle sizes are determined from optical absorption and XRD studies. (© 2007 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Synthesis and characterization of semiconductor metal sulfide nanocrystals using microemulsion technique

The semiconductor nanocrystals ZnS, PbS, CdS and CuS were synthesized via microemulsion technique involving metal acetate, reducing agent (Na₂S) and Triton X‐100 as surfactant. Nanocrystals were characterized by X‐ray diffraction (XRD), transmission electron microscopy (TEM) and dynamic light scattering (DLS). The average size of ZnS, PbS, CdS and CuS nanocrystals were found to be 5.6 nm, 13.3 nm, 11.4 nm and 6.2 nm, respectively. Different parameters like surfactant (Triton X‐100) concentration, water‐to‐surfactant ratio (ω), precursor concentration [zinc acetate, (Zn(AC)₂], reducing agent concentration [sodium sulphide, (Na₂S)] were optimized to synthesize ZnS quantum dots.     

Optical and magnetic properties of Nd‐doped ZnO nanoparticles

Nd‐doped ZnO nanoparticles with different concentration were synthesized by sol‐gel method. The structures, magnetic and optical properties of as‐synthesized nanorods were investigated. X‐ray diffraction (XRD) and x‐ray photoelectron spectroscopy (XPS) results demonstrated that Nd ions were incorporated into ZnO lattice; but Zn_1‐xNd_xO nanoparticles with Nd concentration of x = 0.05 showed Nd₂O₃ phase, so the saturation concentration of Nd in Zn_1‐xNd_xO is less than 5 at%. Vibrating sample magnetometer (VSM) measurements indicated that Nd doped ZnO possessed dilute ferromagnetis behaviour at room temperature. Photoluminescence spectroscopy (PL) showed that Nd ions doping induced a red slight shift and decrease in UV emission with increase of Nd concentration.     

Effect of annealing and composition on crystal structure,surface morphology and optical absorption of chemically deposited Cd1‐xSnxS films

Cd_1‐xSn_xS thin films were successfully deposited on suitably cleaned glass substrate by chemical bath deposition method at 74 °C. Hydrated Stannous Chloride (SnCl₂.2H₂O) in aqueous solution was added to the CdS growing solution in different proportions. The experimental results indicate, a successful doping for lower concentration of Sn, saturation for intermediate doping levels, and a degradation of the doping process for higher concentration of Sn. Indirect (X‐ray diffraction) and Direct (Scanning electron microscopy) measurements were performed to characterize the growth and the nature of crystallinity of the different Cd_1‐xSn_xS films. The effect of annealing on the crystal structure and morphology of the deposited films has also been discussed. The X‐ray diffraction spectra show that the thin films are polycrystalline and have both cubic and hexagonal structure. The Interplanar spacing, lattice constant, grain size, strain, and dislocation density were calculated for as‐deposited and annealed films. The grain size was found to decrease from 5 nm to 0.89 nm with doping concentration of Sn. The grain size further decreased due to annealing at 400 °C. SEM studies show layered growth and long needle like structures along with some voids. After annealing the densification and smaller size of the particles was also observed. The optical absorption spectra show shifting of absorption peaks towards lower wavelength side (© 2010 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Preparation of PbS nano‐microcrystals with different morphologies and their optical properties

PbS nano‐microcrystals were prepared from Pb(OAc)₂·3H₂O and sulfur in a solution without any surfactant using the solvothermal process. Different morphologies, mainly including polyhedron microcrystals and sphere‐like assemblies, were characterized using a scanning electron microscope (SEM) and a transmission electron microscope (TEM). PbS nano‐microcrystals with cubic crystal structure were detected using X‐ray diffraction (XRD), electron diffraction (ED) and high resolution transmission electron micrograph (HRTEM) techniques. The optical properties were investigated by ultraviolet‐visible (UV‐vis) spectroscopy, and photoluminescence spectroscopy (PL). The UV‐vis absorption peaks of PbS exhibited a large blue‐shift and the PL spectra had a strong and broad emission bands centered at 408 nm. The crystal growth mechanism of PbS was also discussed.     

Evolution of real structure in Ge‐Si mosaic crystals

The structure and properties of Czochralski (Cz)‐grown Ge_1‐xSi_x mosaic crystals were investigated using optical microscopy, atomic force microscopy, X‐ray diffraction analysis, microprobe analysis, FTIR and transmission electron microscopy. The role of segregation, form of solid‐liquid interface and dislocation generation in the development of mosaic structure were analyzed and used for optimization of growth parameters such as Si concentration and growth rate. The dislocation density estimated experimentally was compared with the calculated data. Composition fluctuations caused by formation of cellular structure at the interface lead to a local lattice misorientation that is one of the reasons for crystal mosaicity. Model of mosaic structure generation in terms of dislocation density and composition variations is presented.     

Cr content-dependent modification of structural,magnetic properties and bandgap in green synthesized Co–Cr nano-ferrites

Abstract

Honey green synthesis of CoCr_xFe_2?xO₄ (x?=?0.0???1.0) ferrites with increasing Cr content was done by sol-gel auto-combustion method, without any post-preparation thermal treatment. Nanocrystalline nature (grain diameter range between 12.2?nm and 27.9?nm) of the studied samples is confirmed by X-ray diffraction (XRD) data. Observed modification of magnetic properties can be understood in terms of Cr addition induced changes in degree of inversion, modification of disorder affecting A–A, A–B, B–B interaction, re-distribution of cations on A, B sites in the spinel lattice. Grain size (D)-dependent coercivity (H_c) shows that the studied samples lie in the region with overlap between single- and multi-domain regions. Achieved magnetic properties in the studied honey green synthesized samples have significance for self-regulating hyperthermia applications. Results as well reveal modification of bandgap, and would be of use for applications, where minor bandgap tuning is required. Antistructure modeling provides information on the types of surface-active centers.     

Synthesis and characterization of inorganic‐organic ZnS(aminopropane)n composite materials

The main goal of our work was the synthesis and characterization of ZnS(aminopropane)_n hybrid inorganic‐organic layered materials. The basic material of our investigation was ZnS(1,3‐dap)_1/2, (where dap denotes diaminopropane). Its crystal structure has been solved by X‐ray powder diffraction methods. This layered compound was prepared using 1,3‐diaminepropane, zinc sulphate (ZnSO₄) and tioacetamide (CH₃CSNH₂). We have also tried to obtain and characterize other materials: ZnS(1‐ap) and ZnS(1,2‐dap), where ap denotes aminopropane. But in these last two cases diffraction patterns were of much poorer quality, which prevented a full structural survey; thus we cannot directly prove that hybrid lamellar materials were obtained. All compounds were studied using X‐ray diffraction, chemical analysis, UV‐vis spectroscopy and scanning electron microscopy. Additionally, using X‐ray diffraction as a function of temperature, we obtained information about structural changes of obtained composite materials under temperature treatment. (© 2011 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Zr‐doped CeO2 Hollow slightly‐truncated nano‐octahedrons: One‐pot synthesis,characterization and their application in catalysis of CO oxidation

Zirconium‐doped ceria hollow slightly‐truncated nano‐octahedrons (HTNOs) (Ce_1‐xZr_xO₂) were synthesized by a one‐pot, facile hydrothermal method. The morphology and crystalline structure were characterized with powder X‐ray diffraction (XRD), transmission electron microscopy (TEM), scanning electron microscopy (SEM) and the high resolution transmission electron microscopy (HRTEM). The composition and chemical valence on the surface of the as‐prepared Ce_1‐xZr_xO₂ powders were detected by X‐ray photoelectron spectroscopy (XPS) and energy dispersive spectrometry (EDS). The surface area and pore size distribution of as‐obtained Zr‐doped ceria HTNOs were measured by N₂ adsorption‐desorption measurement. Mechanisms for the growth of Zr‐doped ceria HTNOs are proposed as both oriented attachment and Ostwald ripening process and the formation of the hollow structure is strongly dependent on the addition of Zr⁴⁺ ions. Furthermore, the as‐obtained Zr‐doped ceria HTNOs revealed superior catalytic activity and thermal stability toward CO oxidation compared to pure ceria. It may provide a new path for the fabrication of inorganic hollow structures on introducing alien metal ions.     

Rapid Synthesis of Polycrystalline CuGa1‐xInxTe2 Compounds

A series of CuGa_1‐xIn_xTe₂ bulk quaternary compounds (x=0.17, 0.33, 0.50, 0.67, 0.83) has been synthesized from the corresponding stoichiometric melts by a rapid cooling procedure. The same procedure was used to obtain the ternary bulk compounds CuGaTe₂ and CuInTe₂ with the aim to compare, according the Vegard law, the match between molar fraction of the indium (x) and the lattice parameters for the aforementioned quaternary compounds. The nature of the crystalline phases, the local structure homogeneity and stoichiometry of these compounds have been investigated by x‐ray diffraction (XRD) and scanning electron microscopy (SEM) techniques. The analysis revealed the presence of the chalcopyritic structure for all the samples.     

反相微乳液法制备CdS/ZnS纳米晶及其表征

用反相微乳液法制备了CdS纳米粒子,以ZnS对其表面进行包裹,得到了核壳结构的CdS/ZnS纳米晶.采用X射线衍射(XRD)、透射电镜(TEM)表征其结构、粒度和形貌,紫外-可见吸收光谱(UV-VIS)、光致发光光谱(PL)表征其光学特性.制得的CdS纳米微粒近似呈球形,直径约3.6nm;包裹以后颗粒仍为球形,粒径约10nm,以XRD、UV-VIS和PL证实了CdS/ZnS核壳结构的实现.文章还研究了不同Zn/Cd的摩尔比对CdS/ZnS纳米微粒光学性能的影响,UV-VIS谱表明随着壳层厚度的增加CdS/ZnS纳米晶的吸收带边有轻微的红移;PL谱表明壳层ZnS的包覆可减少CdS纳米微粒的表面缺陷,带边直接复合发光几率增大,且具有合适的壳层厚度时,CdS核层的发光效率有较大提高.     

Low temperature synthesis of spindle‐like ZnO nanostructures under microwave irradiation

A simple and general microwave route is developed to synthesize nanostructured ZnO using Zn(acac)₂·H₂O (acac = acetylacetonate) as a single source precursor. The reaction time has a great influence on the morphology of the ZnO nanostructures and an interesting spindle‐like nanostructure is obtained. The microstructure and morphology of the synthesized materials are investigated by X‐ray diffraction (XRD), scanning electron microscopy (SEM), field‐emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), high‐resolution transmission electron microscopy (HRTEM) and selected area electron diffraction (SAED). It is found that all of them with hexagonal wurtzite phase are of single crystalline structure in nature. Ultraviolet–visible (UV‐vis) absorption spectra of these ZnO nanostructures are investigated and a possible formation mechanism for the spindle‐like ZnO nanostructures is also proposed.     

Effect of annealing temperature on the structural and optical properties of amorphous Sb2Te2Se thin films

Thin films of Sb₂Te₂Se were prepared by conventional thermal evaporation of the presynthesized material on Corning glass substrates. The chemical composition of the samples was determined by means of energy‐dispersive X‐ray spectrometry. X‐ray diffraction studies on the as‐deposited and annealed films revealed an amorphous‐to‐crystalline phase transition. The as‐deposited and annealed films at T _a = 323 and 373 K are amorphous, while those annealed at T _a= 423 and 473 K are crystalline with a single‐phase of a rhombohedral crystalline structure as that of the source material. The unit‐cell lattice parameters were determined and compared with the reported data. The optical constants (n , k ) of the investigated films were determined from the transmittance and reflectance data at normal incidence in the spectral range 400–2500 nm. The analysis of the absorption spectra revealed non‐direct energy gaps, characterizing the amorphous films, while the crystalline films exhibited direct energy gaps. (© 2005 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Facile morphology‐controlled hydrothermal synthesis of flower‐like self‐organized ZnO architectures

Flower‐like self‐organized crystalline ZnO architectures were obtained through a facile and controlled hydrothermal process. As‐synthesized products were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), high‐resolution transmission electron microscopy (HRTEM), X‐ray diffraction (XRD), electron diffraction and UV‐Vis spectroscopy. XRD and electron diffraction results confirmed the obtained materials are pure wurtzite ZnO. The effects of different ratios of starting materials and solvent on the morphologies of ZnO hydrothermal products were also evaluated by SEM observations. It is suggested that the use of water, rather than ethanol as the solvent, as well as employing a precursor of Zn(Ac)₂ and 2NaOH (v/v) in hydrothermal reactions are responsible for the generation of specific flower‐like self‐assembled ZnO structures. (© 2011 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Monodisperse CeO2 sub‐micro spherical aggregates with controllable building blocks

Monodisperse CeO₂ spherical aggregates with diameters ranging from 200 to 300 nm have been successfully synthesized through a facile hydrothermal method. The structure and morphology of the samples were characterized by powder X‐ray diffraction (XRD), transmission electron microscopy (TEM), high resolution transmission electron microscopy (HRTEM) and field‐emission scanning electron microscopy (FE‐SEM). The building blocks (primary nanocrystals) of the spherical aggregates could be effectively tuned by adding different amount of urea. Furthermore, N₂ adsorption/desorption experiment displays a gradual increase of BET surface areas of spherical aggregates with increasing the amount of urea. Finally, the formation mechanism of CeO₂ spherical aggregates was preliminarily discussed. (© 2011 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Conversion from ZnO nanospindles into ZnO/ZnS core/shell composites and ZnS microspindles

The formation process of ZnO/ZnS core/shell microcomposites and ZnS microspindles prepared by the reaction of ZnO colloids and thioacetamide under hydrothermal conditions was investigated in detail by X‐ray powder diffraction, field emission scanning electron microscopy, transmission electron microscopy and selected‐area electron diffraction techniques. The precursors of spindlelike ZnO colloids were prepared by a hydrothermal method with the help of a surfactant. A growth mechanism was proposed to account for the formation of ZnO/ZnS core/shell microcomposites and ZnS microspindles. Luminescence measurement revealed that ZnO/ZnS core/shell microcomposites integrated the luminescence effect of ZnO and ZnS. The blue and green emissions were dramatically enhanced, while the orange emission disappeared. The results provide a good approach to tune the visible emission of the ZnO nanostructures by ZnS coating. (© 2009 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)