Synthesis of MoSe2/Reduced graphene oxide composites with improved tribological properties for oil‐based additives

In this work, we developed a facile and effective hydrothermal method synthesis of MoSe₂ nanoflowers on reduced graphene oxide (RGO) sheets. The as‐prepared MoSe₂/reduced graphene oxide (MoSe₂/RGO) composites are characterized by X‐ray diffractometer (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The results indicated that MoSe₂ nanoflowers were successfully deposited on RGO nanosheets to form a well interconnected hybrid structure. The tribological properties of MoSe₂/RGO composites as lubricating oil additive were investigated by a UMT‐2 ball‐on‐plate friction and wear tester. By the addition of MoSe₂/RGO composites in paraffin oil, the antiwear ability was improved and the friction coefficient was decreased. The based oil with MoSe₂/RGO composites showed better tribological properties than the oil with MoSe₂ and pure oil. The good friction and wear properties of MoSe₂/RGO composites as additives were attributed to the formation of a thin physical tribofilm on the substrate.     

溶胶凝胶法制备氧化石墨烯/氧化铝复合材料

将不同配比的异丙醇铝(AlIP)和氧化石墨烯(GO)水分散液,通过溶胶凝胶法制备了氧化石墨烯/氧化铝复合材料.通过SEM和TEM分析,氧化石墨烯被纳米颗粒包裹.XRD分析显示纳米颗粒的成分是Al2O3,通过原子力显微镜(AFM)分析,纳米颗粒的平均粒径为50 nm.复合材料的生长机理是:首先GO和AlIP分子结合,AlIP水解后在GO表面生成AlOOH的小颗粒,随着反应的继续进行颗粒逐渐长大,通过高温处理,AlOOH转变为Al2O3.     

Tetragonal tungsten oxide nanobelts synthesized by chemical vapor deposition

Tungsten trioxide (WO₃) nanobelts in tetragonal structure were grown on Si substrates by a hot-wall chemical vapor deposition (CVD) method without using catalysts. The products were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), transmission electron microscopy (TEM), Raman spectroscopy, and photoluminescence (PL) spectrum. The width of the nanobelts is in the range of 50–100 nm with width-to-thickness ratios of 5–10 and lengths of up to tens of micrometers. These nanobelts grew along the [0 0 1] direction and can be identified as the tetragonal WO₃ structures. Raman and PL measurements indicate the high quality of the nanobelts. The vapor–solid growth mechanism could be applicable in our experiment.     

Fabrication of ferric oxide/reduced graphene oxide/cadmium sulfide heterostructure photoelectrode for enhanced photoelectrochemical performance

A novel high‐efficiency photoelectrode (Fe₂O₃/reduced graphene oxide/CdS) built from heterostructure and conductive scaffold has been successfully designed and synthesized. Reduced graphene oxide works as a “bridge” which benefits for electron and hole transport. The obtained heterostructure photoelectrodes were systematically characterized by X‐ray diffraction (XRD), transmission electron microscopy (TEM), scanning electron microscopy (SEM), Raman spectroscopy, and X‐ray photoelectron spectroscopy (XPS). The photoconversion efficiency (η) and photocurrent densities vs. time (I‐t) curves responding to monochromatic lights have been further investigated in‐depth, which reveals that introduction of CdS and reduced graphene oxide played an important role in the enhancement of photoelectrochemical performance.     

Vanadium pentoxide nanobelts: One pot synthesis and its lithium storage behavior

In this paper, we report a synthesis, characterization and electrochemical properties of V₂O₅ nanobelts. V₂O₅ nanobelts have been prepared via hydrothermal treatment of commercial V₂O₅ in acidic (HCl/H₂SO₄) medium at relatively low temperature (160 °C). The hydrothermally derived products have been characterized by powder X‐ray diffraction (XRD), Fourier transform infrared spectroscopy (FT‐IR), Raman spectroscopy, X‐ray photo electron spectroscopy (XPS), UV‐Vis spectroscopy, Scanning/Transmission electron microscopy (SEM/TEM). XRD pattern of V₂O₅ nanobelts show an orthorhombic phase. From the FTIR spectrum, the peak observed at 1018 cm⁻¹ is characteristic of the stretching vibration mode of the terminal vanadyl, V = O. The UV‐Vis absorption spectrum of V₂O₅ nanobelts show maximum absorbance at 430 nm, which was blue‐shifted compared to that of bulk V₂O₅. TEM micrographs reveal that the products consist of nanobelts of 40‐200 nm in thickness and several tens of micrometers in length. The electrochemical analysis shows an initial discharge capacity of 360 mAh g⁻¹ and its almost stabilized capacity is reached to 250 mAh g⁻¹ after 55 cycles. A probable reaction mechanism for the formation of orthorhombic V₂O₅ nanobelts is proposed.     

Structural,Raman, and photoluminescence properties of double‐shelled coaxial nanocables of In2O3 core with ZnO and AZO shells

We synthesized In₂O₃/ZnO/Al‐doped ZnO (AZO) core‐double shell nanowires, in which the inner shell (ZnO) and the outer shell (AZO) have been subsequently deposited on the core In₂O₃ nanowires. With their one‐dimensional morphology being preserved, the X‐ray diffraction (XRD), lattice‐resolved transmission electron microscopy (TEM) image, selected area electron diffraction, and Raman spectrum coincidentally revealed that the shell was comprised of hexagonal ZnO phase. In addition, TEM‐EDX investigation revealed the presence of Al elements in the shell region. The thermal annealing at 700 °C did not significantly change the nanowire morphology, however, the XRD spectrum indicated that the ZnO phase was crystallized by the annealing. PL spectrum of the 700 °C‐annealed In₂O₃/ZnO/AZO core‐double shell nanowires was comprised of three Gaussian bands at approximately 2.1 eV, 2.4 eV, and 3.0 eV, respectively. The integrated intensities of 2.1 eV‐, 2.4 eV‐, and 3.0 eV‐bands were decreased by the thermal annealing. This study will pave the road to the preparation and applicaition of double‐shelled nanowires. (© 2012 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

synthesis of high‐quality crystalline α‐MoO3 nanobelts

High‐quality crystalline MoO₃ nanobelts were successfully fabricated with a facile hydrothermal route by using common and inexpensive NaCl as a capping agent. The products are thoroughly characterized by the combination of different techniques. The results indicate that as‐prepared MoO₃ nanobelts have an orthorhombic crystal structure (α‐MoO₃) with growth preferential in the [001] direction, the size of the obtained MoO₃ nanobelts ranges from 200 nm to 300 nm in width and micrometers in length. The effects of the amount of NaCl on the morphology and size of the resultant MoO₃ were also investigated, it is clearly shown that the presence of appropriate amount of NaCl plays a crucial role in controlling the size and morphology of the obtained MoO₃. (© 2011 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Preparation of shuttle‐like Sb2S3 nanorod‐bundles via a solvothermal approach under alkaline condition

Uniform shuttle‐like Sb₂S₃ nanorod‐bundles were synthesized via a polyvinylpyrrolidone (PVP) assisted solvothermal approach under alkaline condition, using antimony chloride (SbCl₃) and thiourea (CH₄N₂S, Tu) as the starting materials in ethanol. The phase structure, composition and morphology of the product were characterized by means of X‐ray diffraction (XRD), energy dispersive X‐ray spectrometry (EDS), transmission electron microscopy (TEM), and high‐resolution transmission electron microscopy (HRTEM). XRD and EDS results confirm that the synthesized Sb₂S₃ nanorod‐bundles have an orthorhombic structure and an atomic ratio of 3:2 for S:Sb. TEM and HRTEM results show that the shuttle‐like Sb₂S₃ bundles are composed of nanorods with a size distribution of 20‐40 nm and growing along c‐axis. Furthermore, experiments under different reaction conditions were carried out and the mechanism for the growth of nanorod‐bundles was discussed (© 2010 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Controlled synthesis of PAN/Ag2S composites nanofibers via electrospinning-assisted hydro(solvo)thermal method

The Ag₂S nanoparticles embedded in polyacrylonitrile (PAN) fibers matrix were successfully prepared by the combining electrospinning with the hydro(solvo)thermal process, without the presence of any templates or organic surfactants. What's more, the size and content of Ag₂S nanoparticles was tunable through proper controlling of the reaction conditions. Consequently, the Ag₂S nanoparticles with 10-100 nm diameter could be obtained via this two-step synthetic route. The as-synthesized composites nanofibers were investigated by X-ray diffraction(XRD), field-emission scanning electronic microscopy (FE-SEM), transmission electron microscopy (TEM), selected-area electron diffraction (SAED), Fourier transform infrared spectroscopy (FT-IR), and photoluminescence( PL), respectively. What's more, a possible formation mechanism of Ag₂S nanoparticles grown on PAN nanofibers was also proposed.     

Capsule‐like α‐Fe2O3 nanoparticles: Synthesis,characterization, and growth mechanism

Uniform capsule‐like α‐Fe₂O₃ particles were synthesized via a simple hydrothermal method, employing FeCl₃ and CH₃COONa as the precursors and sodium dodecyl sulfate (SDS) as soft template. X‐ray powder diffraction (XRD), field emission scanning electron microscopy (FE‐SEM), transmission electron microscopy (TEM), and high‐resolution transmission electron microscopy were used to characterize the structure of synthesized products. Some factors influencing the formation of capsule‐like α‐Fe₂O₃ particles were systematically investigated, including different kinds of surfactants, the concentration of SDS, and reaction times. The investigation on the evolution formation reveals that SDS was critical to control the morphology of final products, and a possible five‐step growth mechanism was presented by tracking the structures of the products at different reaction stages.     

Ag@Fe3O4 nanowire: fabrication,characterization and peroxidase‐like activity

With a facile solvothermal method, Ag@Fe₃O₄ nanowire was successfully prepared and characterized by X‐ray diffraction (XRD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). The obtained Ag@Fe₃O₄ nanowire posses enhanced peroxidase‐like activity with good stability and high absorbance. The optimization of pH, H₂O₂ concentration and loading capacity were carried out. The result of kinetic analysis indicates that the catalyzed reaction followed a Michaelis‐Menten behavior. The good peroxidase‐like activity makes Ag@Fe₃O₄ nanowire be promising for real application in biomedicine.     

A study of the growth process of Co3O4 microcrystals synthesized via a hydrothermal method

Pure Co₃O₄ microcrystals were prepared by a hydrothermal method from Co(NO₃)₂·6H₂O and urea solution, and the effect of thermal treatment time on the growth of Co₃O₄ microcrystals was studied by X‐ray diffraction (XRD), scanning electron microscopy (SEM), Raman and UV‐Vis absorption spectra. The results show that with the thermal treatment time increases from 2 h to 12 h, the shape of as‐prepared Co₃O₄ microcrystals changes from the hedgehog sphere‐like to the as‐cubic one that were stacked by lots of lamella, and finally cubes, and then longer time treatment will only lead to the size growth and agglomeration of particles. In conclusion, the cubic Co₃O₄ microcrystals of uniform size (∼6 μm) are synthesized via a 12‐h thermal treatment. Moreover, the synthesis mechanism has been studied.     

Facile solvothermal synthesis,growth mechanism and thermoelectric property of flower‐like Bi2Te3

Hierarchical flower‐like Bi₂Te₃ was synthesized through a facile solvothermal method. The crystal structure and morphology of the as‐prepared samples were characterized by X‐ray diffraction (XRD), filed emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), and high resolution TEM. The reaction parameters such as reaction time, the amount of glucose, concentration of NaOH and the reaction temperature were systematically investigated. Based on the FESEM observations, a possible mechanism defined as a self‐assembly process accompanied by anisotropic growth mechanism was proposed. Moreover, the thermoelectric properties were measured at the temperature range of 300–600 K. The hierarchical flower‐like Bi₂Te₃ presented good thermoelectrical properties. The maximum ZT value reached up to 0.6 at 600 K, which was higher than that of Bi₂Te₃ nanoparticles.     

Facile electrochemical synthesis of tellurium nanorods and their photoconductive properties

Tellurium nanorods have been successfully fabricated by template and surfactant‐free electrochemical technique from an aqueous solution at room temperature. The as‐prepared tellurium nanorods were characterized by X‐ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), Raman spectrometry, UV‐vis spectroscopy and photoluminescence spectroscopy. Films based on tellurium nanorods were constructed to study the photoresponse and I‐V curves. These photoresponse measurements demonstrate that tellurium nanorods exhibited enhanced conductivity under illumination compared to in the dark measurement.     

Synthesis and tribological properties of NbSe3 nanofibers and NbSe2 microsheets

NbSe₃ nanofibers and NbSe₂ sheets were prepared by solid state reaction. The as‐prepared products are characterized by powder X‐ray diffraction (XRD), and scanning electron microscopy (SEM). The results showed that the obtained NbSe₃ nanofibers have a diameter in the range of 100–300 nm and length about 10 μm, while the NbSe₂ sheets have a hexagon structure. The tribological properties of the as‐prepared NbSe_x powders as additives in HVI500 base oil were investigated on UMT‐2 multispecimen tribo‐tester. The wear scars were measured by VEECO WYKO NT1100 non‐contact optical profile testing instrument. It is found that the addition of both NbSe_x nanofibers/sheets improves the tribological properties of base oil. Furthermore, NbSe₂ sheets exhibit better friction reduction and wear resistance properties than NbSe₃ nanofibers in HVI500 base oil. (© 2011 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Low‐temperature urea‐assisted hydrothermal synthesis of Bi2S3 nanostructures with different morphologies

Different morphologies of single‐crystalline orthorhombic phase bismuth sulfide (Bi₂S₃) nanostructures, including sub‐microtubes, nanoflowers and nanorods were synthesized by a urea‐assisted hydrothermal method at a low temperature below 120 °C for 12 h. The as‐synthesized powders were characterized by X‐ray diffractometry (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), high‐resolution transmission electron microscopy (HRTEM) and UV‐vis spectrophotometry. The experimental results showed that the sulfur sources had a great effect on the morphology and size of the resulting powders. The formation mechanism of the Bi₂S₃ nanostructures with different morphologies was discussed. All Bi₂S₃ nanostructures showed an appearance of blue shift relative to the bulk orthorhombic Bi₂S₃, which might be ascribed to the quantum size effect of the final products. (© 2009 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Synthesis of highly ordered hBN in presence of group I/IIA carbonates by solid state reaction

This comprehensive study declares experimentally the effects of IA/IIA metal carbonates on the formation of hexagonal boron nitride (hBN) with the aid of the available experimental methods as regards Fourier transform infrared spectroscopy (FT‐IR), powder X‐ray diffraction (XRD), scanning electron microscopy (SEM) and high resolution transmission electron microscopy (TEM). hBN is synthesized in the existence of the metal carbonates at the low temperature by modified O'Connor method. The experimental findings of FT‐IR and XRD investigations show that the addition of metal carbonates affects considerably the crystallization of hBN powder during the synthesis process. The presence of the high concentration level of the additions improves harshly the crystallinity. In this respect, the graphitization index deduced from the XRD patterns reduces with the enhancement in the amount of the dopant content. At the same time, the differentiation between the products is analyzed by the SEM surveys. According to the results, the materials synthesized by the Li₂CO₃ powder exhibit both the tubular form and rod‐like while the other samples prepared by the CaCO₃ chemical dopant display the homogeneous plates. Even, the TEM images confirm the nanowires and nanotubes structures such as multi‐walled cylindrical, bamboo nanotubes in all the materials studied in this work.     

Zr‐doped CeO2 Hollow slightly‐truncated nano‐octahedrons: One‐pot synthesis,characterization and their application in catalysis of CO oxidation

Zirconium‐doped ceria hollow slightly‐truncated nano‐octahedrons (HTNOs) (Ce_1‐xZr_xO₂) were synthesized by a one‐pot, facile hydrothermal method. The morphology and crystalline structure were characterized with powder X‐ray diffraction (XRD), transmission electron microscopy (TEM), scanning electron microscopy (SEM) and the high resolution transmission electron microscopy (HRTEM). The composition and chemical valence on the surface of the as‐prepared Ce_1‐xZr_xO₂ powders were detected by X‐ray photoelectron spectroscopy (XPS) and energy dispersive spectrometry (EDS). The surface area and pore size distribution of as‐obtained Zr‐doped ceria HTNOs were measured by N₂ adsorption‐desorption measurement. Mechanisms for the growth of Zr‐doped ceria HTNOs are proposed as both oriented attachment and Ostwald ripening process and the formation of the hollow structure is strongly dependent on the addition of Zr⁴⁺ ions. Furthermore, the as‐obtained Zr‐doped ceria HTNOs revealed superior catalytic activity and thermal stability toward CO oxidation compared to pure ceria. It may provide a new path for the fabrication of inorganic hollow structures on introducing alien metal ions.     

Synthesis,characterization and gas sensing properties of flowerlike In2O3 composed of microrods

Flowerlike structured In₂O₃ were successfully synthesized via a hydrothermal process and the subsequent calcinations. The obtained sample consists of microrods with an average diameter of 0.5‐1 μm and a length of 1‐3 μm. Structure and property of the sample were characterized by X‐ray powder diffraction (XRD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). The sensing properties towards trimethylamine (TMA) were examined at 200‐400 °C, which showed high sensitivity, better selectivity, and prompt response/recovery merits. (© 2010 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Solvothermal growth of single‐crystal hexagonal prismatic SrCO3 microrods

Single‐crystal hexagonal prism SrCO₃ microrods have been prepared by a simple solvothermal route. The effects of the reaction time, the content of 1,2‐propanediol and the reactants mass on the products have been investigated, respectively. The as‐synthesized microrods were characterized by X‐ray powder diffraction (XRD), field‐emission scanning electron microscopy (FE‐SEM) and transmission electron microscopy (TEM). The results reveal that the products have uniform shape and excellent monodispersity. (© 2007 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)