Application of dopamine as an electroactive ligand for the determination of aluminum in biological fluids.

Dopamine (3,4-dihydroxyphenylethylamine, DA) is applied as an electroactive chelant for indirect determination of aluminum (Al) in biological fluids. It is observed that the decrease of the differential pulse voltammetric (DPV) anodic peak current of DA is linear with the increase of Al concentration. Under optimum experimental conditions (pH 8.6, 2.0 x 10(-4) M DA, and 0.03 M NH4Ac-NH3 x H2O buffer solution), two linear ranges, 5.0 x 10(-8) - 4.0 x 10(-7) M and 4.0 x 10(-7) - 7.2 x 10(-6) M Al(III), are obtained. The detection limit of Al is 1.9 x 10(-8) M and the relative standard deviation for 4 x 10(-6) M Al(III) is 3.1% (N = 8). Many biologically active foreign species have been selected for interference. Excellent recoveries and accuracy have been obtained in the measurements of Al in biological samples such as synthetic renal dialysate, Ringer's solution, human whole blood, cerebrospinal fluid of demented patient, and urine of diabetic patient. The methodological principle that Al complexes with DA on the electroactive position result in the depression of electrochemical activities of DA has been verified by comparing both the electrochemical behaviors and the spectroscopic responses like UV-vis and Raman of DA in the presence and in the absence of Al.     

Immobilization of DNA on carbon fiber microelectrodes by using overoxidized polypyrrole template for selective detection of dopamine and epinephrine in the presence of high concentrations of ascorbic acid and uric acid

The overoxidized polypyrrole (PPyox) film as a template for DNA immobilization has been demonstrated in this paper. The DNA molecules inserted into the micropores of the ultrathin PPyox matrix under the driving forces of an electric field and were firmly immobilized on the carbon fiber electrode (CFE). Such a DNA-PPyox biocomposite layer exhibited more effective rejection of anionic ascorbate (AA) and uric acid (UA) and more preferential collection of the cationic dopamine (DA) and epinephrine (EP) than pure PPyox and DNA coatings. The DPV peak currents increased linearly with increasing DA and EP concentrations in the range of 3.0 x 10(-7) to 1.0 x 10(-5) M and 5.0 x 10(-7) to 2.0 x 10(-5) M with the lowest detected concentrations of 8.0 x 10(-8) M and 6.0 x 10(-8) M, respectively. The electrochemical signal of AA could be totally suppressed under a concentration of 20 mM and beyond this concentration, the overlapped responses of AA, DA/EP and UA could be resolved into three well-defined voltammetric peaks. The selectivity factors k(DA/AA) and k(EP/AA) were about 5000 and 2000 for an equal concentration in the presence of 0.5 mM UA. The properties of the biocomposite film have been characterized by atomic force microscopy and electrochemical investigations.     

Comparative voltammetric studies of immunoglobulins and DNP-labelled immunoglobulins

A comparative electrochemical study of human immunoglobulins IgG(1) and IgG(3) carried out at a hanging mercury drop electrode shows that mechanisms other than the reduction of interchain disulphide linkages are responsible for the cathodic peaks observed for such proteins. Considering that the nature of the electrochemical process observed for immunoglobulins are poorly defined and not fully understood, a new approach to the electrochemical determination of such proteins, involving the use of 2,4-dinitrophenol (DNP) as a label, has been developed. Dynamic linear ranges of nearly two magnitudes and detection limits below 10(-10) M were achieved.     

Novel dithiolene complexes incorporating conjugated electroactive ligands

A series of new metal (M) dithiolene complexes bearing terthiophene (3, 12, M = Ni; 4, M = Pd; 5, 6, M = Au) and 2,5-bis(para-methoxyphenyl)thiophene units (14, M = Ni; 15, 16, M = Au; 17, M = Pd) have been synthesised in 38-99% yield. The electrochemical properties of the materials have been characterised by cyclic voltammetry and UV-vis spectroelectrochemistry. The nickel complexes possess low oxidation potentials (-0.12 to -0.25 V vs Ag/AgCl) due to the electron-rich dithiolene centres and all complexes display ligand-based redox activity. The terthiophene derivatives have been polymerised by electrochemical oxidation to give stable films with, in the case of poly(3), broad absorption characteristics. Charge transfer materials have been isolated from 14 and 16 with conductivities in the range 9 x 10(-6) to 7 x 10(-8) S cm(-1).     

Electroanalytical characteristics of enoxacin and their analytical application

In a 0.050 M HCl solution containing 0.12 M KCl, enoxacin yields a sensitive polarographic wave at -1.05 V, which can be used to determine trace amounts of the drug, the linear range being from 1.6 x 10(-8) to 1.6 x 10(-5) M with a detection limit of 6.25 x 10(-9) M. The electrochemical characteristics of the drug were studied by normal polarography, cyclic voltammetry and potentiostatic coulometry. A single-sweep polarographic procedure for the determination of enoxacin has been worked out and applied to urine and serum samples.     

Studies of the interaction between Aloe-emodin and DNA and preparation of DNA biosensor for detection of PML-RARalpha fusion gene in acute promyelocytic leukemia

The interaction of Aloe-emodin (AE) with salmon sperm DNA in 0.1M Tris-HCl buffer (pH 4.4) and at the DNA-modified glassy carbon electrode (GCE) was systemically studied with voltammetry and ultraviolet-visible (UV-vis) spectroscopy. AE had excellent electrochemical activity on the GCE with a couple of redox peaks. We propose that AE can intercalate into DNA strands forming a nonelectroactive complex, which results in the decrease of the reduction peak current of AE. The Langmuir adsorption constants of AE at ss- and dsDNA/GCE were (2.1+/-0.4)x10(5) and (2.7+/-0.2)x10(5)M(-1), respectively. The difference between AE at ss- and dsDNA has been used for the preparation of a sequence-specific DNA electrochemical biosensor for detection of PML-RARalpha fusion gene in acute promyelocytic leukemia (APL) with a detection limit of 6.7x10(-8)M and a linear range from 1.5x10(-8) to 1.5x10(-7)M. The selectivity of ssDNA-modified electrode was also described.     

Determination of horseradish peroxidase and a peroxidase-like iron porphyrin at a Nafion-modified electrode.

A catalytic coupling reaction between 4-amino antipyrine and a N,N-disubstituted aniline derivative has been exploited in the indirect electrochemical detection of horseradish peroxidase (HRP) and of a biomimetic catalyst, the iron(III) sulfonated tetraphenyl porphyrin. In the presence of hydrogen peroxide and one of the two catalysts a cationic electroactive quinone-iminium dye P+ was formed and detected by linear scan voltammetry using a screen-printed electrode coated with a Nafion film. Detection limits of 10(-12) M for HRP and 4 x 10(-10) M for the iron porphyrin have been achieved. In conclusion the iron porphyrin is considered to be a promising alternative to the HRP label in enzyme immunoassays with electrochemical detection.     

Correlation of the EPR properties of perchlorotriphenylmethyl radicals and their efficiency as DNP polarizers

Water soluble perchlorinated trityl (PTM) radicals were found to be effective 95 GHz DNP (dynamic nuclear polarization) polarizers in ex situ (dissolution) (13)C DNP (Gabellieri et al., Angew Chem., Int. Ed. 2010, 49, 3360). The degree of the nuclear polarization obtained was reported to be dependent on the position of the chlorine substituents on the trityl skeleton. In addition, on the basis of the DNP frequency sweeps it was suggested that the (13)C NMR signal enhancement is mediated by the Cl nuclei. To understand the DNP mechanism of the PTM radicals we have explored the 95 GHz EPR characteristics of these radicals that are relevant to their performance as DNP polarizers. The EPR spectra of the radicals revealed axially symmetric g-tensors. A comparison of the spectra with the (13)C DNP frequency sweeps showed that although the solid effect mechanism is operational the DNP frequency sweeps reveal some extra width suggesting that contributions from EPR forbidden transitions involving (35,37)Cl nuclear flips are likely. This was substantiated experimentally by ELDOR (electron-electron double resonance) detected NMR measurements, which map the EPR forbidden transitions, and ELDOR experiments that follow the depolarization of the electron spin upon irradiation of the forbidden EPR transitions. DFT (density functional theory) calculations helped to assign the observed transitions and provided the relevant spin Hamiltonian parameters. These results show that the (35,37)Cl hyperfine and nuclear quadrupolar interactions cause a considerable nuclear state mixing at 95 GHz thus facilitating the polarization of the Cl nuclei upon microwave irradiation. Overlap of Cl nuclear frequencies and the (13)C Larmor frequency further facilitates the polarization of the (13)C nuclei by spin diffusion. Calculation of the (13)C DNP frequency sweep based on the Cl nuclear polarization showed that it does lead to an increase in the width of the spectra, improving the agreement with the experimental sweeps, thus supporting the existence of a new heteronuclear assisted DNP mechanism.     

Intramolecular electron transfer in lysozyme studied by time-resolved chemically induced dynamic nuclear polarization

The kinetics of the chemically induced dynamic nuclear polarization (CIDNP) produced in reactions of hen lysozyme with photosensitizers have been studied for the native state of the protein at pH 3.8 and for two denatured states. The latter were generated by raising the temperature to 80 degrees C or by combining a temperature rise (to 50 degrees C) with the addition of chemical denaturant (10 M urea). Detailed analysis of the CIDNP time dependence on a microsecond time scale revealed that, in both denatured states, intramolecular electron transfer (IET) from a tyrosine residue to the cation radical of a tryptophan residue (rate constant k(f)) is highly efficient and plays a decisive role in the evolution of the nuclear polarization. To describe the observed CIDNP kinetics with a self-consistent set of parameters, IET in the reverse direction, from a tryptophan residue to a tyrosine residue radical (rate constant k(r)), has also to be taken into account. The IET rate constants determined by analysis of the CIDNP kinetics are, at 80 degrees C: k(f) = 1 x 10(5) s(-1) and k(r) = 1 x 10(4) s(-1); at 50 degrees C in the presence of 10 M urea: k(f) = 7 x 10(4) s(-1), k(r) = 1 x 10(4) s(-1). IET does not appear to influence the CIDNP kinetics of the native state.     

An electrochemical method for fluoride analysis based on a naphthalene urea derivative as a selective receptor

The use of a naphthalene urea derivative as a host molecule for selective fluoride binding allows us to develop a highly selective and sensitive electrochemical method for fluoride analysis without the interference of other halogen atoms. All the parameters affecting the differential pulse voltammetric response of the host molecule used as a fluoride receptor have been optimized and the mechanisms of the electrochemical behavior have been elucidated. The inhibition in the electrochemical signal of the anionic receptor due to the increase of the fluoride amounts allows the determination of F-with an LOD of 3.16 x 10(-6) M with an RSD (%) value lower than 4.8% and an Er (%) value lower than 3.8%.     

An amperometric horseradish peroxidase inhibition biosensor for the determination of phenylhydrazine

An amperometric horseradish peroxidase (HRP) inhibition biosensor has been substantially constructed by the help of N,N-dicyclohexylcarbodiimide (DCC), N-hydroxysuccinimide (NHS). The preparation steps and the biosensor response to phenylhydrazine were monitored by electrochemical impedance spectroscopy (EIS), cyclic voltammetry, and chronoamperometry. The proposed biosensor could be applied to determine phenylhydrazine in a 0.10 M phosphate buffer solution containing 1.2 mM hydroquinone and 0.50 mM H(2)O(2) by phenylhydrazine, inhibiting the catalytic activity of the HRP enzyme in the reduction of H(2)O(2). The system was optimized to realize a reliable determination of phenylhydrazine in the range of 2.5 x 10(-7) to 1.1 x 10(-6) M with a detection limit of 8.2 x 10(-8) M and a correlation coefficient of 0.999. The modified electrode displayed good reproducibility, sensitivity and stability for the determination of phenylhydrazine.     

Polargraphic adsorptive waves of alkaline-earth metal complexes with thymolphthalexone

Sensitive derivative polarographic adsorption waves have been observed for alkaline-earth metal-TP complexes in 0.15M potassium hydroxide containing 3 x 10(-5)M thymolphthalexone (TP). The limit of detection for calcium, strontium and barium was 7.5 x 10(-7)M and for magnesium 4.0 x 10(-6)M. The proposed method has been used successfully for determining trace amounts of calcium in natural waters and hair samples. The composition of the complex has been shown to be 1:1 alkaline-earth metal:TP and various experiments have confirmed that the wave is an adsorption wave. The reaction mechanism has been studied by a number of methods.     

Voltammetric analysis of ceftazidime after preconcentration at various mercury and carbon electrodes: application to sub-ppb level determination in urine samples

The electrochemical behavior of ceftazidime (CFZ) at four different kinds of electrodes viz. static mercury drop electrode (SMDE), controlled growth mercury electrode (CGME), glassy carbon electrode (GCE) and carbon paste electrode (CPE) has been presented. Optimal operational parameters have been selected for the drug preconcentration and determination in aqueous medium. Down to 2x10(-10) M CFZ is achieved as detection limit at the CGME. Modification of the CPE with polyvinyl alcohol (PVA) enhances both the sensitivity and selectivity for the drug accumulation and, therefore, its determination at very low levels. Application of the proposed method for CFZ analysis in spiked urine samples or those taken after metabolism has been easily assessed. Down to 1x10(-9) M CFZ (0.695 ng ml(-1)) could be easily achieved in such samples.     

Amperometric determination of morphine on cobalt hexacyanoferrate modified electrode in rat brain microdialysates

The analysis of morphine in biological fluids is of vital interest in monitoring opiate abuse and in drug abuse research. In this paper, a cobalt hexacyanoferrate (CoHCF) chemically modified electrode (CME) was prepared. The electrochemical behavior of morphine at this modified electrode has been studied by cyclic voltammetry (CV). The results indicated that the modified electrode exhibited efficiently electrocatalytic oxidation for morphine with relatively high sensitivity and stability. The CoHCF CME was employed as the detector of high-performance liquid chromatography (HPLC). The peak current was linearly related to the morphine concentration in the range of 1.0x10(-6) M to 5.0x10(-4) M at +0.60 V (vs. Ag/AgCl) with a detection limit of 5.0x10(-7) M (S/N of 3). Typical intra-day reproducibility (n=5) of 2.0% and inter-day reproducibility (n=5) of 3.8% were obtained at the 2.0x10(-5) M level. This method was for the first time applied to study the pharmacokinetics of morphine in rat brain after an intravenous administration of morphine (25 mgkg(-1)).     

In Process Citation

Several flavonols of therapeutic interest on account of their vascular properties have been studied. They were all derived from the o-diphenol quercetol. Their electrochemical oxidation at a rotating solid electrode has been examined, and the choice of solvent and pH is discussed. Results obtained by d.c. and pulse polarography are presented. A relation between their structure and electrochemical behaviour has been established. Application to drug analysis is proposed, giving identification, determination and purity assay simultaneously. There is a linear response over the range 5 x 10(-6)-10(-4)M, a sufficient range for analysis of pharmaceuticals.     

Adsorptive preconcentration for voltammetric measurements of trace levels of zirconium

This paper describes an electrochemical stripping procedure for ultratrace measurements of zirconium, in which preconcentration is achieved by the adsorption of a zirconium-Solochrome Violet RS complex onto a hanging mercury drop electrode. Cyclic voltammetry was used to characterize the interfacial and redox behaviour. For a 10-min preconcentration time, the detection limit found was 2.3 x 10(-10)M. Optimal experimental conditions were found to be use of a stirred acetate buffer (pH 4.6) solution with Solochrome Violet RS concentration 1.5 x 10(-6)M, a preconcentration potential of -0.3 V and linear scan mode. A 60-fold enhancement of the response is obtained following 5-min preconcentration. With preconcentration for 60 sec, calibration plots for zirconium are linear for the 1.1 x 10(-8)-1.1 x 10(-7)M range. The relative standard deviation at 5.5 x 10(-8)M is 1.7%. Possible interferences by surface-active organic materials and other trace metals have been investigated. Zirconium added to a sea-water sample at the 10 ng/ml level was readily determined.     

Electrochemical oxidation of luteolin at a glassy carbon electrode and its application in pharmaceutical analysis

Luteolin is a flavonoid reported to occur widely in many medicinal plants. The electrochemical behavior of luteolin was studied in phosphate buffer solution (PBS) of pH 4.0 at a glassy carbon electrode (GCE) by cyclic voltammetry (CV) and differential pulse voltammetric method (DPV). The results indicated the well-defined redox peak of luteolin which was involving two electrons and two protons was observed and the electrode process is adsorption-controlled. The charge transfer coefficient (alpha) was calculated as 0.66. The relationships between oxidation peak current and the concentration of luteolin are linear in the range of 1.0 x 10(-8) - 1.0 x 10(-6) M by DPV method. The detection limit had been estimated as 5.0 x 10(-9) M. The facile and rapid method has been successfully applied to the detection of luteolin in tablets.     

Mechanically immobilized nickel aquapentacyanoferrate modified electrode as an amperometric sensor for the determination of BHA

Nickel aquapentacyanoferrate (NAPCF), a novel transition metal complex has been prepared and its ability to act as an electrocatalyst for BHA oxidation has been demonstrated. The cyclic voltammetric behaviour of the NAPCF modified electrode prepared by mechanical immobilization on the graphite electrode was well defined. A pair of redox peaks corresponding to the electrochemical behaviour of the NAPCF was observed at 0.35 V and 0.31 V, corresponding to the anodic and cathodic peaks respectively, with a formal potential of 0.33 V. The NAPCF modified electrode favoured electrocatalytic oxidation of BHA to occur at a greatly minimized overpotential of 0.48 V. Experiments were performed to characterize the electrode as an amperometric sensor for the determination of BHA. The anodic peak current was linearly related to BHA concentration in the range of 6.24x10(-7) M to 2.19x10(-4) M with a detection limit of 2.49x10(-7) M and a correlation coefficient of 0.9979. Amperometry in stirred solution exhibited quick and sensitive response to BHA, showing the possible application of the modified electrode in flow system analysis. The modified electrode retained its initial response for more than 2 months when stored in supporting electrolyte, owing to the chemical and mechanical stability of the NAPCF mediator. This modified electrode was also quite effective in the determination of BHA in commercial samples.     

Reaction of Cd(II)-Morin with dsDNA for biosensing of ssDNA oligomers with complementary, GCE-immobilized ssDNA

In this work, the complex cadmium(II)-morin was synthesized and its interaction with double-stranded salmon sperm DNA was studied by electrochemical methods on glassy carbon electrode (GCE). It was shown that Cd(II)-Morin with high electrochemical activity can intercalate into the double-helix DNA, and the binding stoichiometry and equilibrium dissociation constant according to the Hill model for cooperative binding were calculated to be 1.761 and 2.5 x 10(-5) M, respectively. Using Cd(II)-Morin as a novel hybridization indicator, the hybridization between the probe and its complementary and mismatched sequence was investigated by differential pulse voltammetry (DPV), which was to access the selectivity of the developed electrochemical DNA biosensor. The complementary target ssDNA could be quantified over the range from 2.69 x 10(-8) M to 9.16 x 10(-7) M with a linear correlation of 0.9971 and a detection limit of 9.30 x 10(-9) M. These results demonstrated that the Cd(II)-Morin indicator provides great promise for the rapid and selective measurement of the target DNA.     

Investigation of electrochemical behavior of lipid lowering agent atorvastatin calcium in aqueous media and its determination from pharmaceutical dosage forms and biological fluids using boron-doped diamond and glassy carbon electrodes

The electrochemical behavior of atorvastatin calcium at glassy carbon and boron-doped diamond electrodes has been studied using voltammetric techniques. The possible mechanism of oxidation was discussed with model compounds. The dependence of the peak current and potentials on pH, concentration, scan rate and nature of the buffer were investigated for both electrodes. The oxidation of atorvastatin was irreversible and exhibited a diffusion-controlled fashion on the diamond electrode. A linear response was obtained within the range of 9.65 x 10(-7) - 3.86 x 10(-5) M in 0.1 M H(2)SO(4) solution for both electrodes. The detection limits of a standard solution are estimated to be 2.11 x 10(-7) M with differential pulse voltammetry (DPV) and 2.05 x 10(-7)M with square wave voltammetry (SWV) for glassy carbon electrode, and 2.27 x 10(-7) M with DPV and 1.31 x 10(-7)M with SWV for diamond electrodes in 0.1 M H(2)SO(4) solution. The repeatability of the methods was found good for both electrodes. The methods were fully validated and successfully applied to the high-throughput determination of the drug in tablets, human serum and human urine with good recoveries.