Comparison of TEVA<Superscript>®</Superscript> resin beads,PAN fibers,and ePTFE membranes as a solid support for Aliquat-336 in immobilized liquid extraction chromatography for separation of actinides

The following paper covers a comparison of two new systems to traditional TEVA^® resin systems for the analytical separation of actinides by immobilized liquid–liquid extraction using Aliquat-336. The new systems are using expanded polytetrafluroethane (ePTFE) membrane or polyacrylonitrile (PAN) fibers as the solid support. The systems are compared in two ways. First in how much Aliquat-336 they contain with the Vs, ratio of volume of Aliquat-336 to volume of polymeric support, being 0.158, 0.483, and 0.590 for the TEVA^® resin, PAN fibers, and the ePTFE systems, respectively. The second comparison is in their performance capacity of extraction of uranyl chloride anion complex. The fiber and resins systems show similar capacities, and the membrane system being an order of magnitude less than the other systems. A cost comparison demonstrates the savings advantages of using a fiber based support compared with resin and membrane support systems.     

Study the radiation effects on 4-vinylpyridine-based porous resins in 99Tc adsorption

The 4-vinylpyridine-based porous resins (4VP–DVB and 4VP–DVBQ) were synthesized to adsorb ⁹⁹Tc from radioactive waste. The radiation stability of the synthesized resins were investigated in air, water, HCl, and HNO₃ mediums. The radiolytic degradation of resins was evaluated by the total organic carbon analysis. The weakly basic resin (4VP–DVB) and strongly basic resin (4VP–DVBQ) showed a remarkable resistance to radiation in HCl and HNO₃ solutions respectively. Moreover, adsorption behavior of irradiated 4VP–DVB and 4VP–DVBQ resins toward ⁹⁹Tc was studied by the batch experimental method.

     

Separation and concentration of technetium using a Tc-selective extraction chromatographic resin

For⁹⁹Tc separation from environmental samples, liquid-liquid extraction, ion-exchange chromatography and coprecipitation, have been described. Although these methods are removing matrix elements, some combinations of them is necessary for purification and concentration of Tc. Besides, the procedures are time-consuming and generally a week or more is needed to purify Tc in the samples. In this study, a novel extraction chromatographic resin for the separation and preconcentration of Tc from several kinds of solutions is described. The material is shown to retain Tc efficiently and selectively from these solutions. Sorbed Tc is readily recovered using 5 ml of 12M HNO₃ and the recoveries with^95mTc are more than 97% for all sample solutions.     

Measurement of <Superscript>99</Superscript>Tc in Savannah River Site high activity waste

Summary Waste cleanup efforts currently underway at the Savannah River Site have created a need to characterize ⁹⁹Tc in the various high activity waste matrices currently in Site inventories. The traditional method our laboratory used for analyzing ⁹⁹Tc in higher activity matrices was a solvent-solvent extraction method using Aliquat-336 in xylene. In an effort to eliminate the resulting generation of mixed wastes, a variety of different separation methodologies have been studied. Eichrom TEVA solid phase extractions using column technology have been employed in a case by case basis over the last several years. More recently, applications using Eichrom TEVA extraction discs and 3M Empore Tc extraction discs have also been explored.     

Extractive scintillating polymer sensors for trace-level detection of uranium in contaminated ground water

This contribution describes the synthesis of robust extractive scintillating resin and its use in a flow-cell detector for the direct detection of uranium in environmental waters. The base poly[(4-methyl styrene)-co-(4-vinylbenzyl chloride)-co-(divinylbenzene)-co-(2-(1-napthyl)-4-vinyl-5-phenyloxazole)] resin contains covalently bound fluorophores. Uranium-binding functionality was added to the resin by an Arbuzov reaction followed by hydrolysis via strong acid or trimethylsilyl bromide (TMSBr)-mediated methanolysis. The resin was characterized by Fourier-transform infrared spectroscopy and spectrofluorometry. Fluorophore degradation was observed in the resin hydrolyzed by strong acid, while the resin hydrolyzed by TMSBr-mediated methanolysis maintained luminosity and showed hydrogen bonding-induced Stokes' shift of ∼100 nm. The flow cell detection efficiency for uranium of the TMSBr-mediated methanolysis resin was evaluated at pH 4, 5 and 6 in DI water containing 500 Bq L⁻¹ uranium-233 and demonstrated flow cell detection efficiencies of 23%, 16% and 7%. Experiments with pH 4, synthetic groundwater with 50 Bq L⁻¹ uranium-233 exhibited a flow cell detection efficiency of 17%. The groundwater measurements show that the resins can concentrate the uranyl cation from waters with high concentrations of competitor ions at near-neutral pH. Findings from this research will lay the groundwork for development of materials for real-time environmental sensing of alpha- and beta-emitting radionuclides.     

Preparation and characterization of an extraction chromatography column for technetium separation based on Aliquat-336 and silica gel support

An extraction chromatographic material based on Aliquat-336 anchored on hydrophobized silica gel support was prepared as an ion exchanger. The prepared material appeared to be suitable for the separation of ⁹⁹Tc from environmental matrices in column application. The properties of the material, sorption characteristic and distribution coefficient of ^99mTcO₄ ^-in various media were studied. The prepared sorbent was conditioned by washing with nitric acid. The solution containing ^99mTcO₄ ^- in 0.1M HNO₃ was passed through the column. Tc was eluted from the column by 8M HNO₃. The flow rate was 0.4 ml/min. The chemical yield of technetium during the separation process was determined using ^99mTc tracer and gamma measurement. The sorption recovery of Tc from the prepared sorbent with 0.1M HNO₃ solution was more than 98%, and the desorption recovery from the column using 8M HNO₃ varied between 92-96%. It was found that the prepared sorbent is suitable for the separation of technetium from environmental matrices and radioactive wastes. This revised version was published online in July 2006 with corrections to the Cover Date.     

Polystyrene resins with immobilized polyamines: Preparation,characterization, and ability to bind Cu(II) ions

Three polyamine ligands, ethylenediamine (EDA), diethylenetriamine (DTA), and triethylenetetramine (TETA), were bound to three chloromethylated “popcorn” polystyrene resins (16, 50, and 100% phenyl ring substitution) with the use of pyridine as the reaction medium. The rate of chloride displacement decreased with increasing molecular weight of the amine and higher degree of resin chloromethylation, while the extent of multiple attachments to the polymer matrix increased. The additional crosslinking, a result of multiple attachments, caused the polyamine resins to swell to a lesser extent in pyridine and water. The ability of the insoluble polyamine–polystyrene resins to chelate Cu²⁺ ions from dilute solutions (200 ppm) was determined at pH 5. With EDA resins the capacity for Cu²⁺ increased with increasing amount of the bound polyamine, with DTA it remained unchanged, while with TETA it was found to decrease.     

Synergic liquid-liquid extraction studies of neodymium and praseodymium with mixtures of tributyl phosphate and Aliquat-336 in nitrate media

Extraction studies of neodymium and praseodymium with mixtures of tributyl phosphate and Aliquat-336 in xylene have been carried out. From 3.0M aqueous ammonium nitrate solutions, negatively charged complexes of neodymium and praseodymium were extracted with Aliquat-336 in the presence of tributyl phosphate into the organic phase. The synergic extracted species observed was M(NO₃) ₄ ^– L⁺·TBP. The synergic extraction of lanthanide elements in nitrate media increases from lanthanum to lutetium.     

Detection of99Tc by accelerator mass spectrometry: Preliminary investigations

Accelerator mass spectrometry (AMS) is an established technique for the detection of long-lived radionuclides at environmental levels. At LLNL, planned facility upgrades and advances in detection techniques are allowing us to explore the applicability of AMS to isotopes not previously pursued. One such isotope is⁹⁹Tc. We have performed a number of preliminary tests to examine the technical feasibility of AMS for the detection of⁹⁹Tc. The questions addressed were negative ion production in the cesium sputter source, transport efficiency for the ions through the spectrometer, and detection efficiency for⁹⁹Tc ions after the spectrometer. Based on the positive results of these tests, we have begun to develo measurement protocol.     

Determination of technetium-99 in aqueous samples by isotope dilution inductively coupled plasma-mass spectrometry

An isotope dilution/inductively coupled plasma mass spectrometric method (ID/ICP-MS) for measuring the concentration of technetium-99 in aqueous samples was developed at the Savannah River Technology Center (SRTC). The procedure is faster than radiometric tecniques, is less subject to interferences, and has equal or better detection limits. It is currently being used to measure the concentration of⁹⁹Tc in samples of Savannah River water collected in the vicinity of the Savannah River Site. In this method one liter samples of water are spiked with⁹⁷Tc. After equilibration, the technetium is extracted from the sample with a chromatographic resin. Interfering elements, molybdenum and ruthenium, are either not retained by the resin or are washed off with, dilute nitric acid. The technetium is then eluted with more concentrated nitric acid, and the⁹⁹Tc/⁹⁷Tc ratio in the eluant is measured with an ICP-MS. The⁹⁹Tc concentration in the original sample is calculated from the⁹⁹Tc/⁹⁷Tc ratio. The chemical recovery of the extraction procedure is greater than 90%. The detection limit of the instrument, taken as three times the background counts atm/z=99, is 0.6 part per trillion (ppt). The detection limit of the procedure, taken as three times the standard deviation of several reagent blank analyses, is 0.33 pCi/l.     

Comparison of the TEVA-Spec resin and liquid-liquid extraction methods for the separation of technetium in soil samples

When ICP-MS is used for⁹⁹Tc measurements, elements which interfere with⁹⁹Tc counting should be removed. In this study, a separation method using a novel chromatographic resin (TEVA·Spec^® resin) was compared with a liquid-liquid extraction (LLX) method for separation and concentration of⁹⁹Tc which was trapped in a solution after combustion of environmental soil samples. The results showed that Tc could be separated from Ru at high recoveries with both separation methods. Molybdenum, however, was not removed by LLX, while more than 99% of Mo in soil samples were removed by TEVA·Spec resin.     

Selective separations by reactive ion exchange: Part 4. Preconcentration of cadmium and zinc by in situ precipitation as hexacyanoferrate(II) salts on gel and macroporous ion-exchange resins

The in situ precipitation of traces of cadmium(II) and zinc(II) ions as hexacyanoferrates from aqueous matrices was studied on conventional polystyrene gel and macroporous cation- and anion-exchange resins. Coprecipitation with each other or with copper(II) ions present in binary cation resins or in solution, and the influence of added nonprecipitating ions of the same charge type such as magnesium(II) were investigated. Microporous (gel) cation exchangers gave reasonable recoveries and macroporous cation exchangers gave very good recoveries; but macroporous anion exchangers performed best, suggesting macroporous hexacyanoferrate(II) resin as an ideal phase for collection/preconcentration of traces of Cu²⁺, Cd²⁺, Zn²⁺, and possibly Co²⁺, Ni²⁺, and Pb²⁺ from waters. As expected, very low yields were obtained with conventional anion exchange resin in the hexacyanoferrate form. Uniform distribution of Cu²⁺, Zn²⁺, and Cd²⁺ over macroporous anion-exchange resin phases were established by means of electron probe scans and taken as evidence for the formation of a uniform, well-developed precipitate layer covering the entire resin particle surface.     

Supported liquid membrane based loading technique for thermal ionization mass spectrometry: an application to plutonium isotopic composition and concentration determination

Supported liquid membrane (SLM) was prepared by immobilizing the extractant tricaprylmethyl ammonium chloride (Aliquat-336) into the microporous poly(propylene) membrane. The formed SLM with optimize composition was found be selective toward Pu⁴⁺ ions over UO₂²⁺ and Am³⁺ ions in a wide range of high acid concentrations (3–7 mol L^?1 HNO₃). The composition of SLM was optimized by using varying proportions of Aliquat-336 with solvents/diluents such as dioctyl phthalate (DOP), 2-nitrophenyl octyl ether and tris(2-ethylhexyl) phosphate. Among these diluents, DOP was found to be stable and causing uniform distribution of the extractant on the membrane. The surface morphology was characterized by atomic force microscopy. Stability and change in physical structure of SLM was characterized by capillary flow porometry. The Pu pre-concentrated in SLM was used to find out isotopic composition and concentration of the plutonium with help of thermal ionization mass spectrometry. The SLM was found to be stable and amenable to routine analyses.     

A novel cloud point extraction approach using cationic surfactant for the separation and pre-concentration of chromium species in natural water prior to ICP-DRC-MS determination

A novel cloud point phase separation of cationic surfactant, Aliquat-336 and capabilities of its reactive solubilizing sites for selective extraction of chromium species at ultra trace levels was examined in natural water. The phase separation behavior of Aliquat-336 is studied with various additives. The nonionic surfactant, Triton X-114 was found to induce the cloud point phase separation of Aliquat-336. The separation of anionic Cr(VI) was enabled by the formation of ion associate with quaternary ammonium head group of Aliquat-336 at pH 2, and the recovery of Cr(VI) and Cr(III) were 101.4 ± 1.4% and 2.2 ± 0.4%, respectively at 0.5-1 ng mL⁻¹, Total Cr was pre-concentrated as Cr-APDC species using the hydrophobic tail group at pH 6.5. The Cr(III) concentration was obtained by subtracting Cr(VI) from total Cr. The recovery of total Cr was 99.5 ± 1.2%. Parameters affecting extraction were assessed. The procedure was applied to NIST 1643c and NIST 1643d waters, and the sum of individual species obtained was compared with the certified chromium values. The method was also applied to various natural waters with limits of detection and pre-concentration factor of 0.010 and 0.025 ng mL⁻¹; 10 and 10, respectively, for Cr(VI) and Cr(III)-APDC using ICP-MS operated in DRC mode.     

Radiochenical determination of technetium-99 in LLW by chelation with sodium diethyl dithiocarbamate (NaDDC) and extraction with chloroform

A radiochemical method has been developed for the determination of⁹⁹Tc in low-level radioactive, waste from nuclear facilities, using^99mTc as an internal tracer. Radioactive contaminants were removed by carrier hydroxide precipitation and chelating extraction with NaDDC/CHCl₃ system at pH 4. The final technetium was chelated with NaDDC in 3N HCl solution and extracted selectively into chloroform. The average of radiochemical recovery for various types of LLW sample is about 90%. The decontamination factors for most radioactive nuclides are higher than 10⁵. The detection limit for⁹⁹Tc in a sample of about 10 g is 0.17 pCi/g (6.5 Bq·kg^–1) for a 100-minute count.     

Cloud-point extraction of nodularin-R from natural waters

A cloud-point extraction (CPE) technique for the determination of a cyanobacterial hepatotoxin, nodularin-R, in aqueous media using a cationic surfactant, tricaprylmethylammonium chloride (Aliquat-336), was developed. Cloud-point phase separation of Aliquat-336 at ambient temperature was induced by the addition of sodium sulfate. The Aliquat-336/Na₂SO₄ CPE system displayed large preconcentration factor, F_C, for nodularin-R. At the operational CPE conditions, F_C of 709.2 was achieved. Distribution constant, K_D, of the distribution of nodularin-R between the surfactant-rich and aqueous phases of the CPE system was estimated to be (4.94±0.8)×10³. Coupled to liquid chromatography with UV detection, the CPE method offered a detection limit of 330 pg ml⁻¹ (in freshwater)/1.3 ng ml⁻¹ (in seawater) and a repeatability of 6.4% (in freshwater) (n=7, P<0.05) for nodularin-R in a sample of 25 ml. The CPE is a rapid process and no cleanup step is required. Effects of pH, natural abundant anion (chloride) and dissolved organic matters (DOM, humic acid, HA) on the extraction efficiency were evaluated. A double CPE technique was developed to overcome interferences encountered in the analysis of environmental samples. Applicability of the new method to the determination of nodularin-R in real coastal marine water samples has also been demonstrated.     

Statistical suitability testing of the Aliquat-336, AnaLig® Pu-02 and TRU® Resin use for the 239,240Pu, 238Pu determination

In this paper three different methods were used for plutonium separation and statistical tested-molecular recognition technology products AnaLig^® Pu-02, liquid–liquid extraction with Aliquat-336 and extraction chromatography with TRU^® Resin. The methods performance was investigated by analysis of NPL (High Alpha–Beta 2005) intercomparison sample. Regression diagnostics procedures were used for examination of the regression triplet and pair t test were applied for comparison of methods for the separation of ^239,240Pu, ²³⁸Pu with Aliquat-336, TRU^® Resin and AnaLig^® Pu-02. The presented results were evaluated as correct for all experimental data.     

Comparison of a radiation counting method and ICP-MS for the determination of99Tc in environmental samples

Results of⁹⁹Tc measurements between radiation and non-radiation counting methods were compared using four radiation sources for which⁹⁹Tc has been previously determined with a gas-flow proportional counter or a GM counter. Each⁹⁹Tc source consisted of a stainless steel planchet bound by mylar films. Seaweeds collected from the Irish Sea were analyzed and⁹⁹Tc was electroplated on the planchet. The⁹⁹Tc in each sample was separated and measured again by inductively coupled plasma mass spectrometry (ICP-MS). Tc was continuously removed from each sample with 2M HNO₃ and 2M NaOH. After the solution containing Tc was adjusted to 0.1M HNO₃, Tc was extracted on a novel extraction chromatographic resin to separate it from Ru. The total recoveries for Tc on the planchet samples were almost the same with an average of 91%. The results of⁹⁹Tc measurements by both radiation and non-radiation counting methods agreed well with each other.     

Extractive photometric determination of plutonium(IV) with Aliquat-336 and xylenol orange

A rapid extractive photometric method using Aliquat-336 and xylenol organe for the determination of plutonium(IV) at μg levels has been developed. Quantitative extraction is obtained from ∼4M aqueous HNO₃ medium, affording estimation in the presence of several commonly occurring impurities, viz. iron, uranium, fission products and cladding materials. Effects of acidity, reagent concentration and diverse ions on the estimation have also been invetigated. Unlike the well-known absorptiometric method for determining plutonium(IV) employing Arsenazo III, the procedure presented here tolerates manyfold excesses of uranium(VI) as well as chromium(III), iron(III) and zirconium(IV), which are some of the major contaminants of plutonium during reprocessing.     

SYNTHESES OF POLYSTYRENE RESINS CONTAINING POLYETHER OLIGOMERS AND THEIR EXTRACTION FOR GOLD (Ⅲ)*

Three polystyrene resins containing polyether oligomers as extractants were synthesized andtheir extraction properties were studied. Gold (III) ion could be extracted rapidly by the resins(T_(1/2),相似文献