The relationship of conductivity to the morphology and crystallinity of polyaniline controlled by water content via reverse microemulsion

Conducting polyaniline (PANI) with the controllable morphology and crystallinity were successfully synthesized with different water content () in the reverse microemulsion stabilized with sodium bis(2-ethylhexyl)-sulfosuccinate (AOT). In the microemulsion, the systems containing the different amounts of water will show the different phase behaviors and structures. The influence of water content on morphology and crystallinity of conducting PANI was characterized by a number of techniques such as Fourier transform infrared spectra, UV–Visible, scanning electron microscopy, transmission electron microscopy, and X-ray powder diffraction and conductivity. In particular, we focus on the understanding of the relationship between the morphology and the crystallinity and the conductivity of PANI powder. With the increasing of the water content (W ₀ = 13.9, 27.8, 55.5, and 111.1) in the microemulsion system, the morphology and the crystallinity obviously changed and the values of relative conductivity are 0.05, 0.11, 2.7, and 1.8 S/cm, respectively.     

Specifics of the formation of J-aggregates of cyanine dyes in solutions of AOT/water/hexane reverse micelles

The behavior of a cyanine dye (3,3′-di-(gamma-sulfopropyl)-4,5,4′,5′-dibenzo-9-ethylthiacarbocyanine betaine pyridinium salt) was studied in AOT/water/hexane reverse micelles over a wide range of W at various concentrations of the dye, AOT, and reverse micelles. The processes occurring during the formation of the AOT/water/hexane micellar solution were studied in detail. It has been shown that, before the formation of the stable microemulsion, the dye aggregation processes occur by virtue of the interaction of the dye with the AOT anion. The amount of J-aggregates is proportional to the logarithm of the ratio of the amount of AOT molecules to the amount of dye molecules. The time behavior of J-aggregates after the formation of a micellar structure depends on the concentration of reverse micelles, thereby indicating an important role of intermicellar exchange.     

Aggregation Behaviors of Tricarbocyanine Dye in Water and in AOT Reverse Micelles

The photophysical property of the tricarbocyanine dye IR144 has been extensively studied in non‐aqueous solvents. However, as a potential near‐infrared biomedical imaging probe, the photophysical property of IR144 in water is still little known. So, the aggregation behaviors of IR144 in water with steady‐state absorption spectroscopy and integrated polarization dependent femtosecond pump‐probe spectroscopy were investigated. Through comparing the absorption spectral bandshape of IR144 in water and in water pool of AOT reverse micelles, It is found that IR144 form dimer aggregates in water even at very low concentration (<1.0×10^?7 mol·L^?1). And the absorption spectrum of the IR144 aggregates always displays a bimodal feature, which is independent of the dye concentration ranging from 1.0×10^?7 to 1.0×10^?4 mol·L^?1. For better understanding the aggregation behaviors of IR144 in water, we measured the ground state recovery kinetics and the reorientation kinetics of IR144 in water and in water pool of AOT reverse micelles (W₀=[H₂O]/[AOT], W₀=40). It is found that the fluorescence quantum yield of IR144 in water is lower than that in water pool of AOT reverse micelles, and the reorientation time of IR144 in water is slower than that in water pool of AOT reverse micelles. Those kinetic measurements also verify that IR144 exists as dimer aggregates in water.     

Association behavior of one-end hydrophobically modified poly[<Emphasis Type="Italic">N</Emphasis><Superscript>5</Superscript>-(2-hydroxyethyl) <Emphasis Type="SmallCaps">l</Emphasis>-glutamine] in water/ethylene glycol mixed solvent

Amphiphilic polymers Cn-PHEG consisting of water-soluble poly[N ⁵-2-(hydroxyethyl) l-glutamine] (PHEG) and hydrophobic alkyl chain (carbon number n = 12, 14, 16, or 18) attached at the PHEG terminal was prepared, and association behavior and structure of associate for Cn-PHEG in selective solvent (water/ethylene glycol mixed solvent) have been investigated. α-Helix content of PHEG block for all the polymers increased with weight fraction of ethylene glycol in the mixed solvent (W _EG). By light scattering measurements, formation of a small micelle was suggested for C14-, C16-, and C18-PHEG when W _EG = 0. With the increase in W _EG, appearance of a larger associate was revealed for C16- and C18-PHEG. Evaluated molecular weight and radius of gyration suggested that the micelle is star-like sphere when W _EG = 0 and worm-like cylinder when W _EG = 0.7. C12-PHEG did not demonstrate any distinct micellization behavior because of the weak hydrophobicity of C12 chain.     

Influence of Confined Water on the Photophysics of Dissolved Solutes in Reverse Micelles

The photophysical parameters of two probes with largely different hydrophobic character, namely, coumarin 1 and coumarin 343, are investigated in sodium bis‐(2‐ethylhexyl)sulfosuccinate (AOT)/hexane/water reverse micelles at various water/AOT molar ratio w₀. Correlation of photophysical parameters such as fluorescence quantum yield, fluorescence lifetime, and emission maxima with w₀ indicate distinctly different trends below and above w₀≈7 for both probes. The variation of the average rotational correlation times obtained from fluorescence anisotropy decays for both probes in reverse micelles further corroborate the above observation. Similar studies were also performed in nonaqueous reverse micelles with acetonitrile as polar solvent. Similar to aqueous reverse micelles, breaks in the photophysical parameters with increasing acetonitrile/AOT molar ratios w′₀ were also observed in these cases, although at a much lower w′₀ value of 3. The present results indicate that around w₀≈7 for aqueous reverse micelles (and around w′₀≈3 for nonaqueous reverse micelles) a distinct change occurs in the probe microenvironment, which is rationalized on the basis of the relative populations of interfacial and core water. We propose that until the ionic head groups and counterions are fully solvated by polar solvents, that is, up to w₀≈7 (or w′₀≈3), the interfacial water population dominates. Above these molar ratios coalescence of excess water molecules with each other to form truncated H‐bonded water clusters leads to a sizable population of core water. This is further substantiated by changes in the IR absorption spectra for the O? D stretching mode of diluted D₂O in reverse micelles with varying w₀. Critical comparison of the present results with relevant literature reports provide clear support for the proposals made on water structure in reverse micelles. The role of relative size of the probe and the reverse micelles for differences in polar solvent to AOT ratios (w₀=7 and w′₀=3) in the observed breaks in the two types of reverse micelles is also discussed.     

Small‐Angle X‐Ray Scattering and Near‐Infrared Vibrational Spectroscopy of Water Confined in Aerosol‐OT Reverse Micelles

The state of water confined in Aerosol‐OT–hydrocarbon–water reverse micelles with cyclohexane, n‐pentane, n‐octane, and n‐dodecane as apolar solvents is investigated by small‐angle X‐ray scattering and near‐infrared vibrational spectroscopy of the first overtone of the OH stretching mode of water. The experiments focus on water/AOT molecular ratios W₀=2–20, where water is strongly affected by the confinement and surface–water interactions. The pair‐distance distribution functions derived from the small‐angle scattering patterns allows a detailed characterization of the topology of these systems, and they indicate deviations from monodisperse, spherical water pools for some of these hydrocarbon systems. In contrast to a common assumption, the pool size does not scale linearly with W₀ in going from dry reverse micelles (W₀→0) to essentially bulk‐like water (W₀>20). The first overtone of the OH‐stretching vibration exhibits highly structured spectra, which reveal significant changes in the hydrogen bonding environment upon confinement. The spectra are rationalized by a core/shell model developed by Fayer and co‐workers. This model subdivides water into core water in the interior of the micelle and shell water close to the interface. Core water is modelled by the properties of bulk water, while the properties of shell water are taken to be those of water at W₀=2. The model allows the representation of the spectra at any hydration level as a linear combination of the spectra of core and shell water. Different approaches are critically reviewed and discussed as well.     

Intermicellar material exchange in reverse micelles formed by ionic AOT and nonionic Igepal surfactants studied by means of pulse radiolysis. Influence of the temperature

The recombination of thiocyanate anion radicals, (SCN) ₂ ⁻ , formed pulse radiolytically within the water pools of reverse micelles stabilized with anionic AOT and nonionic Igepal surfactants, was proved as an indicator reaction to study intermicellar exchange. It was found that the exchange process is slower inIgepal than in AOT reverse micelles with the same water to surfactant ratio. The apparent activation enthalpy and entropy of the exchange process were determined in different alkanes. For the AOT and Igepal reverse micelles the activation parameters increase with the droplet size, but for the AOT systems they do not significantly change with the increase of droplet concentration. For non-percolated systems the activation parameters for Igepal reverse micelles approach those for AOT reverse micelles. This result supports existing suggestions that the mechanism of intermicellar exchange does not differ in principle between reverse micelles stabilized with ionic and nonionic surfactants.     

Biomimetic oxidation of N-nitrosodibenzylamine with molecular oxygen catalysed by chemical cytochrome P-450 in AOT reverse micelles

Moderate yields of benzaldehyde, benzyl alcohol and benzylamine are obtained by the biomimetic oxidation of N-nitrosodibenzylamine with molecular oxygen catalysed by water soluble anionic manganese(III) 5,10,15,20-tetraphenylporphyrin acetate/sodium dithionite/methylene blue in aerosol-OT (AOT) reverse micelles, under phase transfer conditions with AOT concentration higher than 10⁻³M. The formation of α-hydroxy-N-nitrosodibenzylamine and its decomposition products, benzaldehyde and benzyl alcohol in reverse micellar systems are governed by the ratio of water and AOT, pH and other changes in the microenvirpnment.     

Determination of the Water/AOT/Isooctane Reverse Micelles Size Parameters from Their Refractive Index Data

The present paper aims to study the proprieties of water confined in water/AOT/isooctane reverse micelles from their refractive indices at 298.5 K. The refractive indices of the microemulsions were investigated at increasing water concentration and at different micellar volume fractions, Φ _d. The refractive index of micellar water was deduced for a large water to AOT molar ratio, W ₀. The refractive index of interfacial water was also calculated. Then, the molar faction of interfacial water, α, was deduced for different W ₀ values and compared with those measured by NMR as reported in the literature. The results show qualitative agreement. Finally, the average aggregation number, n _agg, the area per surfactant headgroup, σ, as well as the interfacial thickness, d _i, of the reverse micelles were determined for the W ₀ values studied. The values of these structural parameters also show good qualitative agreement with NMR and small angle X-ray scattering data reported in the literature. Thus, the refractive index method can be a cheap and fast alternative for these two methods.     

Improvement in enzyme activity and stability by addition of low molecular weight polyethylene glycol to sodium bis(2-ethyl-L-hexyl)sulfosuccinate/isooctane reverse micellar system

The activity and stability of Chromobacterium viscosum lipase (glycerolester hydrolase, EC 3.1.1.3)-catalyzed olive oil hydrolysis in sodium bis (2-ethyl-1-hexyl)sulfosuccinate (AOT)/isooctane reverse micelles is increased appreciably when low molecular weight polyethylene glycol (PEG 400) is added to the reverse micelles. To understand the effect of PEG 400 on the phase behavior of the reverse micellar system, the phase diagram of AOT/PEG 400/water/isooctane system was studied. The influences of relevant parameters on the catalytic activity in AOT/PEG 400 reverse micelles were investigated and compared with the results in the simple AOT reverse micelles. In the presence of PEG 400, the linear decreasing trend of the lipase activity with AOT concentration, which is observed in the simple AOT reverse micelles, disappeared. Enzyme entrapped in AOT/PEG reverse micelles was very stable, retaining>75% of its initial activity after 60 d, whereas the half-life in simple AOT reverse micelles was 38 d. The kinetics parameter maximum velocity (V _max)exhibiting the temperature dependence and the activation energy obtained by Arrhenius plot was suppressed significantly by the addition of PEG 400.     

Investigation on the basic hydrolysis of crystal violet in mixed reverse micelles formed with AOT and nonionic surfactants

 The kinetics and thermodynamics of the basic hydrolysis of crystal violet (CV) in mixed reverse micelles formed with anionic surfactant AOT and nonionic surfactants have been investigated. It was found that the mixed reverse micelles had inhibitory effects on CV hydrolysis compared with the normal aqueous solution, and the equilibrium constant K of the reaction in mixed reverse micellar systems is smaller than that in pure water. The influence of water content and surfactant composition in reverse micelles on the second-order rate constant k ₁ of the positive reaction, on the first-order rate constant k _-1 of the reverse reaction, as well as on the equilibrium constant K of the reaction has been studied, and the results obtained were interpreted in terms of the nature of surfactants and the properties of microenvironment where the reaction took place. Received: 24 October 1997 Accepted: 18 March 1998     

Brownian dynamics of water confined in AOT reverse micelles: A field-cycling deuteron NMR relaxometry study

Reversed micelles and water in oil micro-emulsions can be used to solubilize biopolymers and genetic materials allowing analyzing their properties in a confined geometry. Nuclear Magnetic Resonance Dispersion (NMRD) provides a powerful and a noninvasive experimental technique to probe the long-term dynamics of these confined systems. However, the first step is to analyze and understand the slow dynamics of water inside these micro-reactors without any guest molecule. This is the aim of this presentation. Experimental results have been obtained for deuteron ²H NMRD of water confined in reverse micelles of bis (2-ethylhexyl) sodium sulfosuccinate (AOT) dispersed in isooctane C₈H₁₈. The water content is expressed as the molar ratio W₀ = [Water]/[AOT]. The radius of the spherical reversed micelles, R_m, increases almost linearly with W₀. In our case, W₀ is chosen in the range 20 ≤ W₀ ≤ 50 (35 ≤ R_m ≤ 80 Å). The frequency dependence for the spin-lattice relaxation rate R₁(ω) exhibits two regimes, for all W₀ values: a plateau at low frequency, proportional to 1/R_m, followed by the beginning of an algebraic decay. These experimental observations are discussed and compared to a numerical simulation of the intermittent Brownian diffusion of a water molecule inside a rotating reverse micelle. The possibility to probe some properties of the confinement, such as the localisation time on the sulfonated palisade and/or the water self-diffusion inside the water pool is emphasised.     

Kinetic Study of the Reaction of Leuco Methylene Blue with 2,6-Dimethyl-<Emphasis Type="Italic">p</Emphasis>-benzoquinone in a Reverse Micellar System

The kinetics of the reaction of leuco methylene blue (MBH) with 2,6-dimethyl-p-benzoquinone (DMBQ) were studied in a heptane/bis(2-ethylhexyl)-sulfosuccinate (AOT)/water reverse micellar system. The pseudo-first-order rate constant (k _obsd) obtained in the presence of excess of DMBQ was found to be proportional to the initial concentration of DMBQ for W ₀=3, 5, 10, 15 and 20 (W ₀=[H₂O]/[AOT]). The second-order rate constant (k ₂=k _obsd/[DMBQ]₀) increased with an increase in the W ₀ value, but was almost independent of the concentration of the water pool. A mechanism involving the distribution of DMBQ between the reverse micellar interface and bulk organic solvent was proposed to explain these findings.     

Phase behavior and solution properties of sodium (3-dodecanoyloxy-2-hydroxy-propyl) succinate in water

Sodium (3-dodecanoyloxy-2-hydroxy-propyl) succinate (SLGMS) is a conjugated anionic surfactant in which a glycerol residue connects with a hydrophilic sodium succinate and dodecanoate. Aqueous micellar phase (W_m), hexagonal (H₁), bicontinuous cubic (V₁), and lamellar (L_α) phases are successively formed with increasing the surfactant concentration in a binary SLGMS-water system. The Krafft point is below 0 °C. The effective cross sectional area per surfactant molecule, a _s, in the H₁ phase is almost constant, 0.5 nm², and the shape of cylindrical micelle is almost unchanged with surfactant concentration. The cmc value of SLGMS measured by means of surface tension, electrical conductivity, and fluorescence probe methods is in the range of 4∼9 × 10⁻⁵ mol/l that is much lower than that of sodium dodecanoate, 2 × 10⁻² mol/l, or SDS, 8 × 10⁻³ mol/l. Hence, it is considered that the polar glycerol part in the SLGMS acts as a hydrophobic part. The solubilization of oil in the SLGMS solution is much higher than that in the SDS solution and this also suggests that the glycerol and succinic units act as lipophilic moieties. Received: 15 June 2000/Accepted: 27 July 2000     

Fourier transform-IR and 1H NMR studies on the structure of water solubilized by reverse aggregates of calcium bis(2-ethylhexyl) sulfosuccinate in organic solvents

The structure of water solubilized by reverse aggregates of calcium bis(2-ethylhexyl) sulfosuccinate in deuterobenzene and toluene has been probed by Fourier transform-IR and ¹H NMR spectroscopies. The ν_OD band of solubilized HOD (4% D₂O in H₂O) has been recorded as a function of the [water]/[surfactant] molar ratio, W/S. Curve fitting of this band showed the presence of a main peak at 2550 ± 13 cm⁻¹ and a small one at 2405 ± 15 cm⁻¹. As a function of increasing W/S, the frequency of the main peak decreases, its full width at half-height increases, and its area increases linearly. The ¹H NMR chemical shift of solubilized H₂O–D₂O mixtures at W/S = 18.1 has been measured as a function of the deuterium content of the aqueous nanodroplet. These data were used to calculate the so-called “fractionation factor” of the aggregate-solubilized water, the value of which was found to be unity. The results of both techniques show that reverse aggregate-solubilized water, although different from bulk water, does not seem to coexist in “layers” of different degrees of structure, as suggested, for example by the two-state water-solubilization model. Received: 12 July 1999/Accepted: 30 August 1999     

Enthalpies of transfer of ubiquinone-0 from water to aqueous surfactant solutions at various temperatures

Mixing and dilution enthalpies of aqueous solutions of 2,3-dimethoxy-5-methyl-1,4-benzoquinone (UQ₀) and of N,N-dimethyl-dodecylamine-N-oxide (DDAO) were measured and used to calculate the enthalpies of transfer δH(W →W +S) of UQ₀ from water to DDAO aqueous solutions at 20‡, 25‡, 30‡, and 35‡C. From the dependence of δH(W →W +S) on surfactant concentration, the distribution constant between aqueous and micellar phases and the standard transfer enthalpy of UQ₀ from water to DDAO micelles were evaluated along with the standard transfer free energy and entropy. The approach used required knowledge of the CMC and micellization enthalpy at each temperature. Thus, the thermodynamics of micellization of DDAO was studied by means of dilution enthalpy measurements at the several temperatures.     

Polygermanosilyne Calcium Hydroxide Intercalation Compounds Formed by Topotactic Transformation of Ca(Si 1 − x Ge x )2 Alloy Zintl Phases in Ambient Atmosphere

Summary.   Epitaxial thin films of Ca(Si _1 − x Ge _x )₂ with 0 < x ≤ 1 are found to react with the moisture of ambient atmosphere to form new Ca-Si-Ge-O-H compounds which were studied by X-ray diffraction, energy dispersive X-ray analysis, infrared absorption, and thermally induced hydrogen desorption measurements. Pure CaGe₂ forms the polygermyne calcium hydroxide intercalation compound Ca(OH)₂(GeH)₂ upon exposure to humidity, with a trigonal tr6 crystal lattice with a = 4.00(1) and c = 65.3(1)?. In mixed Ca(Si _1 − x Ge _x )₂ with smaller Ge content, the group-14 layers are subject to intense oxidation leading to decreased crystallinity. The products exhibit characteristic colours and intense photoluminescence, the peak luminescence varying from 1.35 eV for the reaction product of Ca(Si_0.3Ge_0.7)₂ to 2.6 eV for that of Ca(Si_0.5Ge_0.5)₂. Received March 12, 2001. Accepted (revised) May 2, 2001     

Syntheses and properties of poly (amide–imide)s based on 5,5′-bis[4-(4-trimellitimidophenoxy)phenyl]-hexahydro-4,7-methanoindan and aromatic diamines

 A novel polymer-forming diimide–diacid, 5,5′-bis[4-(4-trimellitimido phenoxy)phenyl]-hexahydro-4,7-methanoindan (II), was prepared by the condensation reaction of 5,5′-bis[4-(4-aminophenoxy)phenyl]-hexahydro-4,7-methanoindan with trimellitic anhydride. A series of novel aromatic poly(amide–imide)s (PAIs) containing polycyclic cardo groups was prepared by the direct polycondensation of II with various aromatic diamines using phosphorylation techniques. The polymers had inherent viscosities between 0.71 and 0.96 dl/g. The polymers were soluble in polar solvents such as N-methyl-2-pyrrolidone, N,N-dimethylacetamide (DMAc) and N,N-dimethylformamide, and could be cast from their DMAc solutions into transparent, flexible, and tough films, except for III _a . These films had yield strengths of 85–114 MPa, tensile strengths of 77–102 MPa, an elongation at break of 8–17%, and initial moduli of 2.0–2.7 GPa. Wide-angle X-ray diffraction revealed that the polymers are amorphous. The glass-transition temperatures of the polymers were in the range 242–312 °C. All the PAIs exhibited no appreciable decomposition below 430 °C, and their 10%-weight-loss temperatures were in the range 484–507 °C in nitrogen and 494–515 °C in air. Received: 26 January 1999 Accepted in revised form: 11 May 1999     

Role of environment on the activity and stability of α-amylase incorporated in reverse micelles

α-amylase (3.2.1.1) was solubilized in reverse micelles formed by Triton X-100 in xylene. Although the enzyme shows decrease in specific activity in reverse micellar medium, it possesses significantly high stability in comparison to bulk aqueous medium. Water/Surfactant ratio (Wo) was found to play a crucial role in both activity and stability of the enzyme. The optimum water/surfactant ratio for the catalytic function of an enzyme in reverse micelles is 36, while the enzyme is stable at Wo 12 for a considerably long period, and at Wo above 20 the enzyme gets inactivated within a day. Glycerol and CaCl₂ improve the stability in both aqueous and reverse micellar medium. Thus the interior of the reverse micelles acts as a microreactor and provides favorable environment for the enzyme activity and stability.     

CH bond activation in the presence or absence of oxygen or nitrous oxide

The reaction of C₂H₆with lattice oxygen, O^2- (in the absence of gaseous oxygen), or “adsorbedℍ oxygen (in the presence of gaseous oxygen) over NiMoO₄ catalysts has been performed and compared to C₃H₈ activation. The results obtained indicate that adsorbed oxygen exhibits a higher reactivity to C₂H₆, while lattice oxygen is more reactive relative to C₃H₈. Kinetic studies of these two reactions in presence of molecular oxygen have indeed shown that the ethane oxidative dehydrogenation (ODH) is dependent on the oxygen partial pressure, whilst on the contrary propane ODH is not. In order to confirm the presence of “adsorbed” oxygen for ethane activation, ODH tests have been performed with N₂O. On increasing temperature, the O^- adsorbed species enhances the mild oxidation of ethane. The activation energy of ethane consumption E_C2H6, relative to propane (E_C3H8 = 133 kJ/mol) is 145 kJ/mol. A possible mechanism is proposed for the oxidative dehydrogenation of ethane. This revised version was published online in August 2006 with corrections to the Cover Date.