Phase formation in sodium dodecylsulfate solutions in the presence of salicylic acid for preconcentration purposes

The occurrence of surfactant-rich phases in aqueous sodium dodecylsulfate solutions in the presence of salicylic acid was investigated. The effect of acidity, electrolyte and salicylic acid concentrations on the parameters of phase formation were studied. Optimal conditions for microcomponent preconcentration were found. The features of solubilization efficiency changes of organic substances depending on their charge and hydrophobicity were established. High efficacy of preconcentration of strongly hydrophobic, positively charged substrates by low-temperature surfactant-rich phases obtained in the sodium dodecylsulfate-salicylic acid-sodium chloride ternary system is shown.     

On the use of solid phase ion exchangers for isolation of amino acids from liquid samples and their enantioselective gas chromatographic analysis

This work focuses on the development of a suitable working procedure for preconcentration of amino acids enantiomers from water samples using a solid phase extraction. The three types of ion exchangers with various capabilities have been used. The effect of experimental conditions in SPE procedure employing strong anion exchange (SAX), weak (WCX) and strong cation exchange (SCX) cartridges (such as sample volume, pH, origin of elution solvent and its volume) on effective preconcentration of the model set of amino acids has been studied in detail. The enantiomers of isolated and preconcentrated amino acids have been analysed by GC on three capillary columns coated with chiral selectors. The different amino acids derivatives have been investigated in order to achieve optimal resolution of biogenic amino acids and their enantiomers. The best separation of amino acid enantiomers has been obtained on a Chirasil-L-Val column analysing their N-TFA methyl esters. It has been shown that SCX-SPE cartridge with sulfonic groups attached on silicagel support is most suitable for isolation and preconcentration of amino acids from water samples. For this sample treatment procedure, the overall recovery of extraction process has been calculated as an average value from three measurements. It has been found, that recoveries are practically identical for both enantiomers of a particular amino acid and varies in the range 75-99% depending on the type of amino acid. The effectivity of this sample preparation and GC method has been verified by preconcentration of amino acids from orange juice fortified by racemic mixture of some selected amino acids.     

Preconcentration of proteins using modified micellar phases of sodium dodecyl sulfate

The influence of electrolyte and additives of organic acids and alcohols on the efficiency of the extraction of ovalbumin and casein into micellar phases of sodium dodecyl sulfate is studied. The optimal acidity and the conditions for the preconcentration of the proteins using low-temperature anion-active phases are found. Micellar extraction procedures for the extraction of proteins from fabrics, solid surface, and biological fluids are proposed.     

Simultaneous on-line preconcentration and determination of trace metals in environmental samples by flow injection combined with inductively coupled plasma mass spectrometry using a nanometer-sized alumina packed micro-column

A flow injection (FI) on-line preconcentration procedure by using a nanometer-sized alumina packed micro-column coupled to inductively coupled plasma mass spectrometry (ICP-MS) was described for simultaneous determination of trace metals (V, Cr, Mn, Co, Ni, Cu, Zn, Cd and Pb) in the environmental samples. The effects of pH value, sample flow rate, preconcentration time, and interfering ions on the preconcentration of analytes have been investigated. Under the optimized operating conditions, the adsorption capacity of the nanometer-sized alumina for V, Cr, Mn, Co, Ni, Cu, Zn, Cd and Pb were found to be 11.7, 13.6, 15.7, 9.5, 12.2, 13.3, 17.1, 17.7 and 17.5 mg g⁻¹, respectively. With 60 s preconcentration time and 60 s elution time, an enrichment factor of 5 and the sampling frequency of 15 h⁻¹ were obtained. The proposed method has been applied to the determination of trace metals in environmental certified reference materials and natural water samples with satisfactory results.     

Preconcentration in multistage liquid-liquid extraction

Theoretical possibilities of the preconcentration of solutes in multistage static liquid-liquid extraction have been investigated. It was found that the preconcentration increases with increasing distribution ratio of the solutes between two phases as well as with the number of stages (n) and reaches its maximum value for n approaching infinity, i.e., in dynamic extraction. Comparison of the preconcentration in multistage (P_ns) and one-stage (p_1s) static operations shows that the relative preconcentration (q_ns=p_ns/p_1s) increases to infinity as the separation efficiency approaches 100%. Some of these theoretical considerations have been confirmed in extraction of radioiodine from aqueous solutions.Presented at the 2nd International Conference on the Separation of Ionic Solutes, SIS'87, Smolenice, Czechoslovakia, October 12–15, 1987.     

Spectrophotometric determination of bromide (and iodide) in a flow system after oxidation by peroxodisulphate

The peroxodisulphate method for the determination of bromide has been modified. A flow-injection system for the spectrophotometric finish has been developed and the size of the ion-exchange column in the preconcentration step has been scaled down. The sum of bromate and iodate produced in the oxidation is determined by treating the oxidized sample with iodide in hydrochloric acid. The iodate is separately determined by applying the reaction in acetic acid. The working range of the spectrophotometric finish is 1-15muM and the limit of determination (10 sigma) is 0.7muM for iodate and for iodate plus bromate. The enrichment factor in the preconcentration step is 50, yielding a limit of determination of 15nM for bromide in natural waters. Eighteen samples of water from the Baltic, with salinity ranging from 3 to 33%. have been analysed. A Br/Cl ratio of (1.53 +/- 0.02) x 10(-3) was found. A comparative study of the original and the new preconcentration step has been made with three river waters, rich in humic substances. The results agreed within +/- 1. 5%.     

Functionalization of cross linked chitosan with 2-aminopyridine-3-carboxylic acid for solid phase extraction of cadmium and zinc ions and their determination by atomic absorption spectrometry

We have developed a new method for solid phase extraction (SPE) and preconcentration of trace amounts of cadmium and zinc using cross linked chitosan that was functionalized with 2-aminopyridine-3-carboxy acid. Analytical parameters, sample pH, effect of flow rate, sample volume, and concentration of eluent on column SPE were investigated. The effect of matrix ions on the recovery of cadmium and zinc has been investigated and were found not to interfere with preconcentration. Under the optimum experimental conditions, the preconcentration factors for Cd(II) and Zn(II) were found to be 90. The two elements were quantified via atomic absorption spectrometry. The detection limits for cadmium and zinc are 21 and 65?ng?L^?1, respectively. The method was evaluated by analyzing a certified reference material (NIST 1643e; water) and has been successfully applied to the analysis of cadmium and zinc in environmental water samples.

Numerical simulation of DNA sample preconcentration in microdevice electrophoresis

A numerical model is presented for the accurate and efficient prediction of preconcentration and transport of DNA during sample introduction and injection in microcapillary electrophoresis. The model incorporates conservation laws for the different buffer ions, salt ions, and DNA sample, coupled through a Gaussian electric field to account for the field modifications that cause electromigration. The accuracy and efficiency required to capture the physics associated with such a complex transient problem are realized by the use of the finite element-flux corrected transport (FE-FCT) algorithm in two dimensions. The model has been employed for the prediction of DNA sample preconcentration and transport during electrophoresis in a double-T injector microdevice. To test its validity, the numerical results have been compared with the corresponding experimental data under similar conditions, and excellent agreement has been found. Finally, detailed results from a simulation of DNA sample preconcentration in electrophoretic microdevices are presented using as parameters the electric field strength and the other species concentrations. The effect of the Tris concentration on sample stacking is also investigated. These results demonstrate the great potential offered by the model for future optimization of such microchip devices with respect to significantly enhanced speed and resolution of sample separation.     

Chromium speciation,selective extraction and preconcentration by alumina-functionalised 2-pyridenecarboxyladehyde thiosemicarbazone

A method is proposed and explored for speciation of Cr(III) and Cr(VI), selective extraction and preconcentration in various water samples based on dynamic and static techniques. Three newly designed alumina phases-physically adsorbed-2-pyridenecarboxyladehyde-thiosemicarbazone [Al-2PC-TSC (I–III)] were synthesised and characterised. Stability tests and application of [Al-2PC-TSC (I–III)] as inorganic ion exchangers and chelating solid sorbents for various metal ions were studied and evaluated. The distribution coefficient and separation factors of chromium species versus other interfering metal ions were determined to examine the incorporated selectivity into these alumina phases. Quantitative recovery of Cr(VI) was accomplished by [Al-2PC-TSC (I–III)] at pH = 1.0 while Cr(III) was found to be quantitatively recovered on these sorbents at pH = 7.0 with minimal or no interference between these two species under the studied buffering conditions. Selective solid phase speciation and preconcentration of Cr(III) and Cr(VI) in various real water samples were successfully performed and accomplished via a micro-column, with 200 as a preconcentration factor. Selective speciation of Cr(VI) and Cr(III) via preconcentration from seawater and industrial water samples by alumina phases in pH = 1 was found to give percentage recovery values of Cr(VI) in the range 93.5–97.3 ± 3.0–5.0% and 94.0–97.5 ± 3.0–4.0%, for seawater and industrial water samples, respectively.     

Voltammetric determination of methidathion insecticide

An electroanalytical method has been developed for the determination of methidathion by squarewave voltammetry on a Nafion®-coated glassy carbon electrode in aqueous solutions with 0.05 M acetate buffer as a supporting electrolyte. The best voltammetric conditions were found to be pH 4.0, a preconcentration potential of 0.45 V, and a preconcentration time of 60 s. The experimental parameters, such as pH, film thickness, preconcentration potential, preconcentration time, and square-wave voltammetric parameters, were optimized. Using this method, the calibration curve is linear in the range 5 × 10^?8?7 × 10^?7 M with a detection limit (S/N = 3) of 30 nM.     

Preconcentration of copper, nickel and zinc with Amberlite XAD-16 resin

Summary An adsorption-elution and atomic absorption spectrophotometric method using Amberlite XAD-16 is proposed for the preconcentration and determination of Cu, Ni and Zn. Optimum conditions for the preconcentration were investigated. Recoveries of the elements were found to be 82.4±0.3%, 95±3% and 71±1% for Cu, Zn and Ni, respectively, at 95% confidence level. The recoveries were increased to about 99% for Cu and Ni by complexing with 1-(2-pyridylazo)-2-naphthol (PAN). The effect of Na and K on the preconcentration of trace metals has also been investigated. The method was applied to a tap water.     

分子印迹壳聚糖/凹土分离富集-火焰原子吸收光谱测定痕量铅

建立了用分子印迹壳聚糖/凹凸棒石（MICA）分离富集-火焰原子吸收光谱（FAAS）测定痕量铅的新方法。 在动态吸附条件下,系统地研究了溶液pH值、流速、洗脱条件和干扰离子对痕量铅分离富集的影响;在pH=4.5,上样流速为0.60 mL/min的条件下,铅能被MICA定量富集;吸附的铅可用1.0 mol/L HCl-0.1 mol/L 甲基异丁酮的乙醇溶液在流速为0.96 mL/min条件下完全洗脱;在优化条件下,MICA对铅的动态吸附容量为36.78 mg/g。 线性范围为0～1.28 mg/L,r=0.999 7,检出限（3σ,n=11）为0.73 μg/L,相对标准偏差为1.69%(n=6,ρ=0.08 mg/L),回收率在98.7%～101.4%之间。 该方法操作简便、线性关系良好、灵敏度和精密度高,应用于实际水样中痕量铅的测定,结果满意。     

Optimisation of the conditions for stripping voltammetric analysis at liquid–liquid interfaces supported at micropore arrays: a computational simulation

Micropore membranes have been used to form arrays of microinterfaces between immiscible electrolyte solutions (μITIES) as a basis for the sensing of non-redox-active ions. Implementation of stripping voltammetry as a sensing method at these arrays of μITIES was applied recently to detect drugs and biomolecules at low concentrations. The present study uses computational simulation to investigate the optimum conditions for stripping voltammetric sensing at the μITIES array. In this scenario, the diffusion of ions in both the aqueous and the organic phases contributes to the sensing response. The influence of the preconcentration time, the micropore aspect ratio, the location of the microinterface within the pore, the ratio of the diffusion coefficients of the analyte ion in the organic and aqueous phases, and the pore wall angle were investigated. The simulations reveal that the accessibility of the microinterfaces during the preconcentration period should not be hampered by a recessed interface and that diffusional transport in the phase where the analyte ions are preconcentrated should be minimized. This will ensure that the ions are accumulated within the micropores close to the interface and thus be readily available for back transfer during the stripping process. On the basis of the results, an optimal combination of the examined parameters is proposed, which together improve the stripping voltammetric signal and provide an improvement in the detection limit.     

Zinc silicate-bonded diethyldithiocarbamate — a selective adsorbent for separating transition metal ions and preconcentration of palladium(II)

Summary A new chelating adsorbent, zinc silicate-bonded diethyldithiocarbamate (DTC) has been prepared for the separation and preconcentration of some transition metal ions. The distribution coefficients (Kd values) of 15 metal ions have been estimated in solution at various pH's and some quantitative separations have been achieved. The high selectivity for Pd(II) has been utilized for its preconcentration from dilute aqueous solutions; quantitative elution is effected with acidic 4% thiourea solution.     

Square-wave voltammetry of the o-catechol-Ge(IV) catalytic system after adsorptive preconcentration at a hanging mercury drop electrode

Square-wave (SW) voltammetry in connection with a hanging mercury drop electrode has been applied for studying the reduction of Ge(IV) catalyzed by o-catechol after adsorptive preconcentration. Acetate buffer solutions with low and high analytical concentrations of o-catechol [with respect to that of Ge(IV)] have been used. Dependences of SW catalytic peaks on accumulation conditions have been attributed to the formation of the catalytic complexes via a direct-adsorption mechanism. The nature of the electrocatalytic process (involving an apparently quasi-reversible electrode reaction with an adsorbed reactant and a diffusing product) allows us to explain complex dependences of catalytic peaks on SW-parameters. Adequate conditions for determination of o-catechol and Ge(IV) by means of SW catalytic adsorptive voltammetry have been established.     

Electrokinetic chromatography with polymeric pseudostationary phases

Recent research and development efforts concerning polymeric pseudostationary phases (PSPs) for electrokinetic chromatography are reviewed. The introduction of new materials, characterization of structural effects on performance and selectivity, applications, and the use of polymeric PSPs with mass spectrometric detection are considered. Very interesting results concerning the effects of polymer structure have been reported. Significant developments have also been reported in the development of novel applications of polymeric PSPs, particularly for sample preconcentration using micellar affinity gradient focusing. The use of mass spectrometric detection with electrokinetic chromatography has seen significant development, and recent reports indicate that this is a robust and sensitive approach.     

Adsorptive preconcentration for voltammetric measurements of trace levels of zirconium

This paper describes an electrochemical stripping procedure for ultratrace measurements of zirconium, in which preconcentration is achieved by the adsorption of a zirconium-Solochrome Violet RS complex onto a hanging mercury drop electrode. Cyclic voltammetry was used to characterize the interfacial and redox behaviour. For a 10-min preconcentration time, the detection limit found was 2.3 x 10(-10)M. Optimal experimental conditions were found to be use of a stirred acetate buffer (pH 4.6) solution with Solochrome Violet RS concentration 1.5 x 10(-6)M, a preconcentration potential of -0.3 V and linear scan mode. A 60-fold enhancement of the response is obtained following 5-min preconcentration. With preconcentration for 60 sec, calibration plots for zirconium are linear for the 1.1 x 10(-8)-1.1 x 10(-7)M range. The relative standard deviation at 5.5 x 10(-8)M is 1.7%. Possible interferences by surface-active organic materials and other trace metals have been investigated. Zirconium added to a sea-water sample at the 10 ng/ml level was readily determined.     

Quinoline-8-ol-immobilized Amberlite XAD-4: synthesis,characterization, and uranyl ion uptake properties suitable for analytical applications

Amberlite XAD-4 has been functionalized by coupling it with 5-aminoquinoline-8-ol after acetylation. The resulting resin has been characterized by elemental analysis and IR spectra and has been used for preconcentrating uranyl ions prior to its determination by spectrophotometry. The optimum pH value for quantitative sorption is 4-6, and desorption can be achieved by using 5 mL of 1 mol L(-1) HCl. The sorption capacity of the resin is 11.5 mmol g(-1). The effect of various cations and anions on the preconcentration of uranium in conjunction with the determination procedure has been studied and we have found that none of the ions interfere except thorium. The enrichment factor for preconcentration of uranium was found to be 200. Ten replicate determinations of 40 micro g of uranium present in 1 L of sample gave a mean absorbance of 0.185 with a relative standard deviation of 2.64%. The detection limit corresponding to three times the standard deviation of the bank was found to be 2 micro g L(-1). The validation of the developed preconcentration procedure was carried out by successfully analyzing standard marine sediment reference material. The uranyl content of sediment and soils is estimated by spectrophotometry after its preconcentration with the above chelating resin.     

Solid phase extraction of lanthanum on modified low-polar sorbents

The preconcentration of lanthanum has been studied on low-polar sorbents modified with 1-phenyl-3-methyl-4-benzoylpyrazol-5-one, including hexadecylsilica, hyper-crosslinked polystyrene, polyvinylidene difluoride F2M, and activated carbon. The coefficients of reagent and the lanthanum distribution have been calculated under dynamic conditions. The leaching of the attached reagent from the sorbent surface has been investigated. The recovery of lanthanum with modified and nonmodified sorbents has been compared. The efficiency of lanthanum desorption with nitric acid and ethanol has been studied.     

Temperature-induced phase separation in pseudoternary mixtures of Triton X-100–butanol–kerosene–water

The transparent Winsor IV domain in the phase diagram of the mixtures of emulsifier (Triton X-100 and butanol), oil (kerosene), and water is found to be 34% of the total phase diagram in presence of emulsifier with surfactant:cosurfactant::1:1, and is water dominant. Increase in cosurfactant/surfactant ratio inverts the Winsor IV domain to become oil rich. The plot of conductance of the microemulsions prepared by substituting water by brine against water content depicts the existence of three distinct phases like oil-in-water, bicontinuous, and water-in-oil microemulsion in the phase diagram. The phase contrast micrographs of the mixtures of different compositions in these three different phases reveal the existence of microdroplets of oil dispersed in water and water dispersed in oil. Further, the dynamic light scattering studies of these solutions reveal an inhomogeneity in the size distribution of the droplets. A temperature-induced clouding in the microemulsion domain leading to phase separation has been observed. Additives like glucose, sucrose, and sodium chloride decrease the cloud point (CP), while addition of ammonium thiocyanate increases it. A quantitative relationship of the clouding temperature with the composition of the microemulsion has been established. With increase in oil and emulsifier, the cloud point of the microemulsion increases. The separated phases after the clouding have been used for preconcentration of water-soluble metal ions as well as oil-soluble dyes. The turbid systems on heating led to separation into three isotropic phases which are found to be stable at ambient temperature. The stability of these phases is ascribed to the formation of stable microemulsions by mass transfer from one phase to other.