Characterization of the sorption of uranium(VI) on different complexing resins

The sorption of uranium(VI) on two cationic resins containing different complexing groups, the iminodiacetic resin Chelex 100 and the weak carboxylic resin Amberlite CG-50, was investigated. The Gibbs–Donnan model was used to describe and to predict the sorption through the determination of the intrinsic complexation constants. These quantities, even though non-thermodynamic, characterize the sorption as being independent of experimental conditions.The sorption mechanism of the metal on the complexing resins was also studied by adding a competitive soluble ligand that shifts the sorption curves to higher pH values. The ligand competes with the resin for the complexation with the metal ion. Uranium is also strongly sorbed on Chelex 100 at very acid pH, through formation of two complexes in the resin phase: ML with log_110i=–1.16, in more acidic solution, and ML₂ with log_120i=–5.72. Only the presence of the competitive ligand in solution makes the determination of the second complex possible. Also on Amberlite CG-50 the sorption is strong and involves the formation of the complex ML₂, in more acidic solution, with log_120i=–3.16. In the presence of the ligand EDTA, the complex ML₂(OH)₂ was characterized with log_12–2i=–5.15. In all the experiments the hydrolysis reaction in the aqueous phase was quantitatively considered.     

Voltammetry as a Virtual Potentiometric Sensor in Modelling of a Metal/Ligand System and Refinement of Stability Constants. Part 2

A mathematical conversion of data from nonequilibrium and dynamic voltammetric techniques (direct‐current‐sampled (DC) and differential‐pulse (DP) polarography) into potentiometric, free‐metal‐ion sensor‐type data is described and employed in the study of Bi^III complexes with the ligand picolinic acid (=pyridine‐2‐carboxylic acid) (labile and dynamic metal/ligand system). A novel procedure that allows evaluation of experimental data collected at very low pH values (acid‐base titration) is proposed. Software ESTA dedicated to potentiometry was successfully employed in the refinement operations performed with virtual potentiometric (VP) data obtained from DC and DP polarography, the latter being performed at fixed pH (ligand titration) as well as at fixed [L_T]/[M_T] ratio (acid‐base titration). It was possible to refine stability constants either separately from VP‐DC or VP‐DP, or simultaneously from any combination of VP‐DC and VP‐DP obtained from ligand and/or acid‐base titrations. The concept of VP‐DC or VP‐DP is employed for the first time in the study of an unknown Bi^III/picolinic acid/OH system, and numerous documented and possible advantages are discussed. Five complexes of bismuth, ML, ML₂, ML₃, ML₄, and ML₃(OH) and their stability constants (as log β) 7.48±0.01, 13.94±0.01, 18.10±0.04, 20.47±0.25, and 26.65±0.03, respectively, are reported at 0.5M (Na,H)NO₃ ionic strength and T 298 K. The proposed procedure can be easily utilized also by non‐electrochemists who are interested in, e.g., ligand‐design strategies.     

BINDING ABILITY OF OXINE-LIKE LIGANDS. POTENTIOMETRIC AND POLAROGRAPHIC STUDY ON Ni(II), Co(II), Zn(II) AND Cd(II) COMPLEXES OF 9-HYDROXYPYRIDO(1,2,-α)PYRIMIDIN-4-ONE

Abstract

Potentiometric and polarographic studies of metal ion coordination with 9-hydroxypyrido[1,2-α]pyrimidin-4-one (HPP) with Ni(II), Zn(II), Co(II) and Cd(II) ions have been carried out. For comparison, stability constants with 8-hydroxy-imidazo[1,2-α]pyridine (HIP) were also measured. Due to the low solubility of the latter ligand complexes, measurements were made also in dioxan/water solutions. In the case of both ligands the coordination mode is the same. The oxine-like binding via {N, O^?} donor set leads to formation of stable ML and ML₂ complexes. Stability constants clearly indicate that both ligands are very effective and the HPP, having a more favourable position of the electron pair on nitrogen, forms stronger complexes with smaller metal ions i.e., Ni(II), Zn(II) and Co(II). Cd(II) is better fitted to the HIP donor set.     

Voltammetry as Virtual Potentiometric Sensor in Modelling of a Metal/Ligand System and Refinement of Stability Constants. Part 5

The concept of virtual potential (employed here in modelling operations), a unique experimental setup designed and built in our laboratories, and new regression equations derived for nonlinear fitting of quasi‐reversible direct‐current polarograms were combined with the existing rigorous treatment and refinement of polarographic data to establish reliable metal/ligand models and accurate stability constants for the lead(II)/glycine/OH^? and lead(II)/sarcosine/OH^? systems (sarcosine = N‐methylglycine). In the case of glycine, the complexes [M(HL)], [ML], [ML₂], and [ML₃] were identified, and their stability constants (as log β) were established to be 10.51 ± 0.06, 4.58 ± 0.02, 7.19 ± 0.10, and 9.27 ± 0.02, respectively, the complex [ML₃] being reported here for the first time (Table 2). The system with sarcosine involving [M(HL)], [ML], [ML₂], [ML₃], and [ML₂(OH)₂], with the stability constants (as log β) 11.01 ± 0.04, 4.18 ± 0.03, 7.23 ± 0.03, 9.1 ± 0.3, and 15.97 ± 0.07, respectively, is reported for the first time (Table 3). The log K₁ value for Pb^II with sarcosine is a fraction of a log unit smaller when compared with the Pb^II complex with glycine, in agreement with the literature data for Cu^II, Ni^II, and Zn^II showing the same trend for these two ligands. The proposed nonlinear curve‐fitting operations expand the applicability of polarography to study reliably and conveniently quasi‐reversible, on the polarographic time scale, metal/ligand systems (systems with involved heterogeneous kinetics).     

Solution Equilibria. A Unified Mathematical Treatment of Experimental Polarographic and Potentiometric Data from Acid?Base and Ligand Titrations. A Polarographic and Ion Selective Electrode Study of CdII?(N‐(2‐hydroxyethyl)iminodiacetic acid)?OH System

It has been demonstrated that potentiometric and polarographic data coming from either acid? base or ligand titrations can be evaluated by the same set of equations and mathematical procedures involving mass‐balance equations written for any metal? ligand model, including polynuclear species. It is shown that the concept of the complex formation curves, used previously in modeling and refinement of stability constants in acid‐base titration, is of general nature and can be successfully used in polarographic and potentiometric experiments conducted as a function of pH or an excess of a ligand. It appears that the linear relationship ΔE vs. log [M], typical for potentiometric studies with ISE, holds also in the case of the study of kinetically mixed metal‐ligand system studied by polarography when the corrected shift in the polarographic signal is used. The relationship ΔE vs. log [M] applies equally to the acid‐base and ligand titration for both experimental techniques employed (potentiometry and polarography). The significance of the corrected shift is discussed and its meaning in the study of kinetically fast or slow metal? ligand systems is elaborated. Advantages of the acid‐base titration over the ligand titration are discussed. The generalized mathematical data treatment was successfully employed in the study of the Cd^II? (N‐(2‐hydroxyethyl)iminodiacetic acid) system. Results obtained from both analytical techniques (potentiometry with the use of an ion selective electrode, and two polarographic techniques) and analytical procedures (acid? base and ligand titrations) compare well with each other and with the literature data (the formation and stability constants of ML and ML₂). In addition, a new complex M(HL) was identified and its stability constant is reported.     

Thermodynamic behavior of complexation of 18-crown-6 with Tl<Superscript>+</Superscript>, Pb<Superscript>2+</Superscript>, Hg<Superscript>2+</Superscript>, and Zn<Superscript>2+</Superscript> metal cations in methanol-water binary media

The equilibrium constants and thermodynamic parameters for complex formation of 18-Crown-6 (18C6) with Tl⁺, Pb²⁺, Hg²⁺, and Zn²⁺ metal cations have been determined by conductivity measurements in methanol (MeOH)-water (H₂O) binary solutions. 18-Crown-6 forms 1:1 complexes with Hg²⁺ and Zn²⁺ cations, but in the case of Tl⁺ and Pb²⁺ cations, in addition to 1:1 stoichiometry, 1:2 (ML₂) complexes are formed in some binary solvents. The thermodynamic parameters (ΔH _c⁰ and ΔS _c⁰), which were obtained from the temperature dependences of equilibrium constants, show that in most cases the complexes are enthalpy destabilized but entropy stabilized. Non-linear behavior is observed between the equilibrium constants (log K _f ) of complexes and the composition of the mixed solvent. The selectivity of the ligand for these metal cations is sensitive to the solvent composition, and, in some cases, the selectivity order is reversed in certain compositions of the mixed solvent. The results also show that the mechanism of complexation reactions and the stoichiometry of complexes of some metal cations change with the nature and even with the composition of the mixed solvent. The article was submitted by the authors in English.     

A POTENTIOMETRIC STUDY OF METAL CHELATES WITH TETRAETHYLENEPENTAAMINEHEPTA-ACETIC ACID

Abstract

The protonation constants of tetraethylenepentaamineheptaacetic acid, TPHA, were determined by potentiometric titration in aqueous solution at an ionic strength of 0.10 M KNO₃ and at 25°C. The formation constants of various metal-TPHA complexes were also obtained by titrating mixtures of metal to ligand in molar ratios of 1 :1 and 2:1. Calculations were performed with the computer program BEST. Individual stability constants are reported for Co(II). Ni(II), Cu(II), Zn(II), Cd(II), Hg(II) and Pb(II) with TPHA as well as their related pro-tonated species. The stabilities of the 1:1 complexes parallel to those of similar complexes with DTPA and TTHA. However the 2: 1 complexes have significantly larger log K _ML's than their TTHA counterparts. The extra stability of the 2:1 metal-TPHA complexes is explained in terms of ligand denticity and steric effects. Mercury(II)-TPHA complexes exhibited the highest formation constants and the copper-TPHA complexes had slightly higher log K _ML's than those for Co(II), Ni(II), Zn(II), Cd(II) and Pb(II).     

Spectroscopic and thermodynamic studies of complexation of some divalent metal ions with isatin-<Emphasis Type="Italic">β</Emphasis>-thiosemicarbazone

Metal complexes of some divalent metal ions (Co, Ni, Cu, Zn, Hg, and Pd) with isatin-β-thiosemicarbazone (ITS) as the Schiff base have been investigated potentiometrically and spectrophotometrically. The dissociation constants of the ligand and formation constants of the metal complexes, as well as the corresponding thermodynamic functions (ΔG, ΔH and ΔS) have been determined at different temperatures in ethanol—water solution. The full stability constants were also evaluated spectrophotometrically by the Job method. The experimental results indicate that Cu(II), Zn(II), Pd(II), and Hg(II) form one-to-one molecular complexes (ML) with the studied ligand, whereas Co(II) and Ni(II) form both ML and ML₂ species.     

Cadmium(II) binding by soil-derived fulvic acid measured by anodic stripping voltammetry

Titrations of aqueous solutions of soil fulvic acid (30, 45, and 60 mg l^-1) with cadmium ion solutions at pH 6 and 7 reveal unusual shapes in the stripping current (i_s) vs. total cadmium ion (C_cd²⁺) curves. The expected inflections occur in the titration curves at 8–16 μM. at pH 6 and 12–26 μM at pH 7. In addition, there is an initial rapid increase in i_s at very low C_cd²⁺. The initial rapid increase in current is attributed to labile cadmium—fulvic acid complexes that contribute to i_s by rapid dissociation. Subsequent addition of cadmium ion results in moderately labile complexes and i_s becomes partially kinetically controlled. The stripping current was corrected for kinetic current contributions from dissociation of complexes, and total ligand concentrations, conditional stability constants, and upper slopes were calculated from data well past the titration end-point. The use of upper slopes after kinetic current corrections as in situ calibration curves, allowed calculations of equilibrium cadmium concentrations. The data show that both kinetic current corrections and in situ calibration curves are necessary to avoid substantial errors in calculations of equilibrium cadmium concentrations from anodic stripping voltammetric experiments.     

Intramolecular stacking interaction in mixed-ligand complexes containing ATP4- and aromatic N-heterocyclic ligands

The stability constants of the binary ML2+ and ternary M(ATP)L2- complexes,where L=Iq (isoquinoline) or BIm (benzimidazole) and M=Zn2+ or Cd2+,have been determined by poten-tiometric pH titration in aqueous solution at I=0.1 mol/L (NaClO4),T=25℃.The stability of the ternary complexes characterized by corresponding to the equilibrium M(ATP)2-+ML2+=M(ATP)L2-+M2+ is higher than what would be expected on statistical grounds.The increase may be related to the stacking interaction between the aromatic ring of the ligands L and the purine moiety of ATP4- 1H NMR studies of Zn2+/ATP4-/L confirm the presence of stacking in the ternary complexes.It is concluded that the strength of the intramolecular stacking interaction is dependent on the structure of the aromatic ring of the ligand L and the formation of a metal ion bridge.Possible implications are discussed briefly.     

Mass spectral fragmentation of metal dithiocarbamate complex salts

A summary of the mass spectra of metal dithiocarbamate complex salts (ML₂ and ML₃) is presented. Only divalent metal dithiocarbamate ions without an electronic configuration containing an inert s-orbital electron pair exhibited both expulsion of a ligand radical (L) and the neutral even electron species (L–H) generated from the ligand via hydrogen transfer to the metal-containing fragment ion. Divalent metal dithiocarbamate ions can be generated either by direct electron impact ionization of gas phase ML₂ molecules or ionization of ML₃ molecules followed by loss of a ligand radical. A highly stable sp² hybridized, gas phase ion of a monobidentate lead dithiocarbamate complex is proposed.     

Influence of Process Parameters on the Reaction Kinetics of the Chromium‐Catalyzed Trimerization of Ethylene

In this paper we report the results of an extensive experimental kinetic study carried out on the novel ethylene trimerization catalyst system, comprising the chromium source [CrCl₃(thf)₃] (thf=tetrahydrofuran), a Ph₂P‐N(iPr)‐P(Ph)‐N(iPr)H (PNPNH) ligand (Ph=phenyl, iPr=isopropyl), and triethylaluminum (AlEt₃) as activator. It could be shown that the initial activity shows a first‐order dependency on the ethylene concentration. Also, a first‐order dependency was found for the catalyst concentration. The initial activity follows a typical Arrhenius behavior with an experimentally determined activation energy of 52.6 kJ mol^?1. At elevated temperatures (ca. 80 °C), a significant deactivation was observed, which can be tentatively traced back to a ligand rearrangement in the presence of AlEt₃. After a fast initial phase, a pronounced ‘kink’ in the ethylene‐uptake curve is observed, followed by a slow, almost linear, further increase of the total ethylene consumption. The catalyst composition, in particular the ligand/chromium and the cocatalyst/chromium molar ratio, has a strong impact on the catalytic performance of the trimerization of ethylene.     

Role of the supramolecular structure of the reactants in the kinetics of the liquid-phase synthesis and decomposition of explosives

Formulas relating the observed rate constant of the initial reaction step (k _ef) to the rate constants of the elementary steps (k _i ), to the monomer-association species equilibrium constants (K _i ), and to the concentrations of the reactants (A _i ) and solvent have been obtained for a number of simple kinetic models of liquid-phase explosive material synthesis and decomposition reactions involving associating reactants. The k _ef = F(k _i , K _i , and A _i ) relationship is independent of the rate law of the reaction and is governed by the association species type (autoassociation or heteroassociation species) and by the number of association species kinds. In the case of parallel reactions involving association species, as distinct from the same reactions involving unassociated reactants, concentration variations have an effect on the ratio of the rates of the parallel steps and on the product yield ratio. By varying the reaction temperature, it is possible to make the rates of the parallel steps to vary in opposite ways. When monomers, dimers, and tetramers are present in the reaction mixture, the temperature dependence of lnk _ef may have an extremum. These deduced regularities are in qualitative agreement with experimental data.     

Equilibrium and spectral studies of putrescine complexes with copper(II)

Summary It has been found that in the putrescine-copper system several types of complex compounds (MHL,ML,ML ₂,ML ₂OH) are formed. In thepH range of 7–9, despite a multiple excess of ligand, a precipitation occurs. When adenosine is introduced to the system, the ability to observe the complexation reaction in solution is largely increased, because the additional ligand prevents precipitation. On the basis of computer analysis of potentiometric titration data the stability constants of the compounds have been determined. The coordination mode of the complexes is discussed.

---

Gleichgewichte und spektroskopische Untersuchungen an Putrescin-Komplexen mit Kupfer(II)

Zusammenfassung Es wurde festgestellt, daß sich im Putrescin-Kupfer System einige Typen von Komplexen bilden (MHL,ML,ML ₂ andML ₂OH). ImpH-Bereich von 7–9 tritt trotz eines mehrfachen Ligandenüberschusses ein Niederschlag auf. Bei Einführung von Adenosin in das System wird die Beobachtbarkeit der Komplexreaktion verbessert, da der zusätzliche Ligand die Niederschlagsbildung verhindert. Mittels Computeranalyse der potentiometrischen Titrationsdaten wurden die Stabilitätskonstanten der Verbindungen ermittelt. Die Art der Komplexierung wird ebenfalls diskutiert.

     

The stability of some lanthanide complexes with methylethyl glycolate and with methylpropyl glycolate

The 4 successive stability constants have been determined for the methyIethyl glycolate and methylpropyl glycolate complexes of some lanthanide elements by potentiometric titration For all the metal ions, except lanthanum, the average ligand number exceeds a value of 3 indicating the formation of uninegative tetra-ligand complexes, ML₄^-, The stability constants are close to the values of the corresponding α-hydroxyisobutyrate complex systems     

Extraction of microamounts of europium and americium into nitrobenzene by using hydrogen dicarbollylcobaltate in the presence of diphenyl-N-butylcarbamoylmethyl phosphine oxide

Extraction of microamounts of europium and americium by a nitrobenzene solution of hydrogen dicarbollylcobaltate (H⁺B⁻) in the presence of diphenyl-N-butylcarbamoylmethyl phosphine oxide (DPBCMPO, L) has been investigated. The equilibrium data have been explained assuming that the complexes HL⁺, HL₂⁺, ML₂³⁺, ML₃³⁺ and ML₄³⁺ (M³⁺ = Eu³⁺, Am³⁺) are extracted into the organic phase. The values of extraction and stability constants of the species in nitrobenzene saturated with water have been determined. It has been found that the stability constants of the corresponding complexes EuL _n ³⁺ and AmL _n ³⁺, where n = 2, 3, 4 and L is DPBCMPO, in water saturated nitrobenzene are comparable.     

Evaluation of thermodynamic functions for complexation reactions involving bivalent metal ions and ethyl-2,3-dioxobutyrate-2 p -bromophenylhydrazone

Complexation reactions of bivalent metal ions and ethyl-2,3-dioxobutyrate-2p-bromophenylhydrazone (EDOB-2p-BPH) have been studied potentiometrically in 50% (v/v) ethanol/water medium at different ionic strengths with respect to NaClO₄ and at different temperatures and their stability constants determined. The method of Bjerrum and Calvin as modified by Irving and Rossotti has been used to determine then andpL values. S_min values which have the same significance as ‘T²’ have also been calculated. The thermodynamic stability constants and standard free energy change (ΔG) have also been calculated. ΔG values are negative in all cases indicating that the reactions are spontaneous. The ligand field stabilization energy (δH) has also been calculated for the 3d transition metals.     

Complex Equilibria of Organotin(IV) in Aqueous Solution with Imidazole Derivatives

Summary. Equilibria studies in aqueous solution containing 25% dioxane (V/V) are reported for dimethyltin(IV) and trimethyltin(IV) (M) complexes with some imidazole derivatives (L). Stoichiometry and stability constants for the complexes formed were determined at 25°C and ionic strength 0.1M NaNO₃. The results of the dimethyltin(IV) complexes showed the best fit of the titration curves when complexes ML, ML ₂, ML ₂H_–1, and ML ₂H_–2 were expected beside the hydrolysis products of the dimethyltin(IV) cation, while the calculations of the trimethyltin(IV) complexes reported the presence of only the complexes ML, MLH_–1, and the hydrolysis products of the trimethyltin(IV) cation. The concentration distribution of each species of the complexes in solution was evaluated. The stability of all complexes formed was investigated and discussed in terms of molecular structure of the ligand imidazole and the nature of the alkyltin cation. It is deduced that the stability of the complex formed increases as the basicity of the ligand imidazole is increased. On the other hand, the trimethyltin(IV) cation has a very low ability to form complexes compared to the dimethyltin(IV) cation.Received November 22, 2002; accepted (revised) March 3, 2003 Published online August 18, 2003     

The stability constants of the alkaline earth lactate and α-hydroxyisobutyrate complexes

The stability constants of the lactate and α-hydroxyisobutyrate complexes of the alkaline earths were determined by potentiometric titration. The average ligand number exceeds a value of one, indicating the formation of ML⁺ and ML₂ complexes. α-Hydroxyisobutyrate forms stronger complexes than lactate. The stability constants β₂ increase as a function of decreasing atomic number for both ligands: Ba< Sr<Ca< Mg, although the constant β₁ is greater for Mg than for Ca.     

Determining PPARγ-ligand binding affinity using fluorescent assay with cis -parinaric acid as a probe

Upon the study of small-molecules binding to proteins, the traditional methods for calculating dissociation constants (K _d and K _i ) have shortcomings in dealing with the single binding site models. In this paper, two equations have been derived to solve this problem. These two equations are independent of the total concentration or initial degree of saturation of receptor and the activity of the competitive molecule. Through nonlinear fitting against these two equations, K _d value of a probe can be obtained by binding assay, and K _i value of a ligand can be obtained by competitive assay. Moreover, only the total concentrations of receptor([R]_t), ligand([L]_t) and probe([P]_t) are required for the data fitting. In this work, K _i values of some typical ligands of PPARγ were successfully determined by use of our equations, among which the K _i value of PPARγ-LY171883 was reported for the first time.