Pyrolysis of polyphenylenes with PCL or/and PSt side chains

Thermal degradation characteristic of polyphenylenes is an important issue for developing a rational technology of polymer processing and applications. In this study, we discussed thermal degradation of polyphenylenes (PP) with poly(ɛ-caprolactone) (PCL) and/or PCL/polystyrene copolymers (PSt) prepared by combined controlled polymerization and cross-coupling processes via direct pyrolysis mass spectrometry. When PP-graft-PCL/PSt copolymers were considered, thermally less stabile PCL side chains decomposed in the first step. In the second stage of pyrolysis, the decomposition of the polystyrene chains has taken place. A slight increase in thermal stability of PCL chains for PP-graft-PCL/PSt copolymers was noted compared to copolymer PP-graft-PCL due to the interaction between PSt and PCL chains. This interaction was stronger when PSt chains were linked to the 2-position of the 1,4-phenylene ring.     

Pyrolysis of poly(phenylene vinylene)s with polycaprolactone side chains

The thermal degradation characteristics of a new macromonomer poly(-caprolactone) with central 4,4′-dicarbaldehyde terphenyl moieties and poly(phenylene vinylene)s with well defined (-caprolactone), (PPV/PCL) as lateral substituents were investigated via direct pyrolysis mass spectrometry. The unexpectedly high thermal stability of the macromonomer was attributed to intermolecular acetylation of benzaldehyde yielding a hemiacetal and causing a crosslinked structure during the pyrolysis. Increased thermal stability of the PCL chains was detected for all samples. The increase in stability of PCL chains was much more pronounced than was detected for poly(p-phenylene)-graft-poly(-caprolactone) copolymer (PPP/PCL); the upward temperature shift was about 100 °C for PPV/PCL and only 20 °C for PPP/CL. This pronounced effect may be due to higher thermal stability of PPV compared to PPP and the decrease in steric hindrance for PPV with PCL side chains.     

Boron trifluoride-catalyzed degradation of poly--caprolactone at ambient temperature

Poly--caprolactone (PCL) can be accelerated to degrade in the presence of boron trifluoride at ambient temperature. The degradation behaviors were studied by using the inherent viscosity measurement, gel permeation chromatography (GPC), infrared analysis (FTIR), nuclear magnetic resonance analysis (NMR), and thermal analysis (DSC). With increasing the addition amount of boron trifluoride, the molecular weight of PCL decreases; the molecular weight distribution is broadened; and the degree of crystallinity of PCL increases at first at low BF₃ level, then decreases when BF₃ content exceeds to 2.64 wt%. The results of IR, ¹HNMR and GPC reveal that -caprolactone monomer does not occur and the main degradation products are the oligomers of PCL with low molecular weight. The mechanism for boron trifluoride-catalyzed degradation of PCL is discussed.     

Effect of soy protein isolate on the thermal, mechanical and morphological properties of poly (-caprolactone) and corn starch blends

The development of biodegradable polymers is considered to be a good alternative to decrease the volume of the plastic waste disposed into the environment every year. The use of natural polymers as raw materials to develop polymer blends and composites has increased the demand for renewable sources such as starch and soy protein.In this work, the authors prepared and characterized the thermal, mechanical and morphological properties of blends based on poly (-caprolactone) and modified corn starch, with added soy protein isolate (SPI) and sorbitol. All samples were processed by extrusion in a single-screw extruder and hot pressing. It was observed that the addition of modified corn starch and SPI were responsible for the reduction of thermal and mechanical properties of the materials, compared to pristine PCL. However, with increasing amounts of SPI and the reduction of starch incorporated into the samples, their properties tend to recover. The insertion of soy protein isolate in the formulations was done with the aim of balancing the C/N ratio of the blend, which plays a key role in the biodegradation process of these materials.     

Degradation of copolymers obtained by ring-opening polymerization of glycolide and -caprolactone: A high resolution NMR and ESI-MS study

Electrospray ionization-mass spectrometry (ESI-MS) and proton nuclear magnetic resonance (¹H NMR) have been used to investigate the hydrolytic degradation of copolymers obtained by bulk ring-opening copolymerization of glycolide and -caprolactone with monomer ratios ranging from 70/30 to 30/70. NMR allows changes of the average sequence distribution and composition of the components to be followed. In contrast, ESI-MS is able to reveal the detailed chemical structures of various sequences despite the molecular weight limit of 2000 Da. Combination of ESI-MS with NMR can thus provide information to describe microstructure changes during degradation. The distribution of various oligomers shown in the form of planar projections is of great interest for the design of biodegradable system aimed at medical applications.     

Patterning of biomolecules on a poly(-caprolactone) film surface functionalized by ion implantation

Biomolecule patterning is important due to its potential applications in biodevices, tissue engineering, and drug delivery. In this study, we developed a new method for a biomolecular patterning on poly(-caprolactone) (PCL) films based on ion implantation. Ion implantation on a PCL film surface resulted in the formation of carboxylic acid groups. The generated carboxylic acid groups were used for the covalent immobilization of amine-functionalized p-DNA, followed by hybridization with fluorescently tagged c-DNA. Biotin-amine was also covalently immobilized on the carboxylic acid generated PCL surfaces. Successful biotin-specific binding of streptavidin further confirmed the potential of this strategy for patterning of various biomolecules.     

Particle size and concentration of poly(-caprolactone) and adipate modified starch blend on mineralization in soils with differing textures

The objective of this study was to evaluate the effect of particle size and concentration of poly(-caprolactone) and adipate modified starch blend on mineralization in soils with differing textures, comparing it with polyethylene under the same experimental conditions. Two soil types were used: a Kandiudalfic Eutrudox with a clayey texture and an Arenic Hapludult with a sandy texture. The two different plastic specimens were incorporated in the form of plastic films with three increasing particle sizes and six doses, from 0 to 2.5 mg C g⁻¹ soil. Each plastic dose was incorporated into 200 g of soil placed in a hermetically closed jar at 28 °C, and incubated for a 120-day period to determine CO₂ evolution. Once again it was confirmed that polyethylene is almost non-biodegradable, in contrast to PCL/S, which can be defined as a biodegradable material. Soil texture affected the mineralization kinetics of the plastic specimens, with higher values for the clayey soil. No changes in soil microbial biomass-C or -N were observed by adding polyethylene and PCL/S to the soil. Also, no significant differences were observed on seed emergence and development of rice seedlings (Oryza sativa L.) in plastic modified soil.     

Monomer insertion mechanism of ring-opening polymerization of -caprolactone with yttrium alkoxide intermediate: A DFT study

The mechanism of -caprolactone (CL) insertion into a Y–OCH₃ bond was investigated using density functional theory (DFT) calculations. The optimized geometries and corresponding Gibbs-free energies of the intermediates were obtained, which confirmed a four-step coordination-insertion mechanism. The coordination of CL onto yttrium center led to a nucleophilic addition of the carbonyl group of CL, followed by an intramolecular alkoxide ligand exchange. A monomer insertion was completed by the CL ring opening via acyl–oxygen bond cleavage. The formation of the five-coordinated yttrium intermediate, 3, was found to be the rate-determining step. This study could be applicable to ring-opening polymerisation (ROP) of CL initiated by lanthanide metal complexes.     

Thermal degradation of poly(p-phenylene-graft-?-caprolactone) copolymer

The thermal degradation of poly(p-phenylene-graft-?-caprolactone) (PPP), synthesized by Suzuki polycondensation of poly(?-caprolactone) (PCL) with a central 2,5-dibromo-1,4-benzene on the chain with 1,4-phenylene-diboronic acid, has been studied via direct pyrolysis mass spectrometry. The thermal degradation occurred mainly in two steps. In the first step, decomposition of PCL chains occurred. A slight increase in thermal stability of PCL chains was noted. In the second stage of pyrolysis, the decomposition of the polyphenylene backbone takes place. The evolution of CL monomer or small CL segments left on the phenyl ring continued also in the temperature region where degradation of PPP backbone started.     

Release behaviors of porous poly(butylene succinate)/poly(epsilon-caprolactone) microcapsules containing indomethacin

The biodegradable poly(butylene succinate)/poly(epsilon-caprolactone) (PBS/PCL) microcapsules containing indomethacin were prepared by emulsion solvent evaporation method. The morphologies, thermal properties, and release behaviors of PBS/PCL microcapsules were investigated. As a result, the microcapsules exhibited porous and spherical form in the presence of gelatin as a surfactant. From the DSC result, the PBS/PCL microcapsules showed the two exothermic peaks meaning the melting points of PCL and PBS. The results of FT-IR and DSC proved that the PBS and PCL were mixed so that the PBS/PCL microcapsules were composed of two wall-forming materials. And the release rate of indomethacin from the microcapsules was decreased with increasing the PCL content. It was noted that an addition of PCL on the PBS led to the decrease of pore size in the PBS/PCL microcapsules.     

Direct pyrolysis mass spectrometry studies on thermal degradation characteristics of poly(phenylene vinylene) with well-defined PSt side chains

Thermal degradation characteristics of a new macromonomer polystyrene with central 4,4′-dicarbaldehyde terphenyl moieties and poly(phenylene vinylene) with well-defined polystyrene (PPV/PSt) as lateral substituents were investigated via direct pyrolysis mass spectrometry. A slight increase in thermal stability of PSt was detected for (PPV/PSt) and attributed to higher thermal stability of PPV backbone. It was almost impossible to differentiate products due to the decomposition of PPV backbone from those produced by degradation of PSt.     

Lipase-catalysed degradation of copolymers prepared from ?-caprolactone and dl-lactide

A series of copolymers were prepared by ring-opening polymerization of ?-caprolactone and dl-lactide, using zinc lactate as catalyst. The resulting PCL/PLA copolymers were characterized by various analytical techniques such as NMR, SEC, DSC and X-ray diffraction. The [CL]/[LA] ratios of the copolymers are very close to those in the feed, indicating a good conversion of monomers. The copolymers with CL contents higher than 50% appear semi-crystalline, the crystalline structure being of the PCL-type. Compression moulded polymer films were allowed to degrade in a pH = 7.6 phosphate buffer containing Pseudomonas lipase. Data show that copolymers with CL contents lower than 25% are not degradable and the degradation rate increases with CL content for CL-rich copolymers. Various soluble degradation products are detected in the degradation medium, including CL₁ to CL₃ and LA₁ to LA₄ homo-oligomers, and CL₂LA₁ co-oligomer. The presence of LA homo-oligomers and CL₂LA₁ co-oligomer suggests that Pseudomonas lipase can not only degrade PCL but also LA short blocks along PCL/PLA copolymer chains. On the other hand, little changes of composition are detected during degradation, in agreement with a surface erosion mechanism as shown by ESEM.     

Synthesis, characterization and self-assemble behavior of chitosan-O-poly(ε-caprolactone)

A facile strategy was proposed for synthesizing chitosan-O-poly(ε-caprolactone) (CS-O-PCL). Stoichiometric sodium dodecyl sulfate-chitosan complex (SCC) which was soluble in common organic solvents was adopted as an intermediate. Regioselective conjugation of PCL onto SCC could be achieved through condensation reaction between isocyanate-terminated PCL and hydroxyl groups of chitosan. The grafting level of PCL could be modulated by varying PCL/SCC weight ratio. SDS was removed from SCC-O-PCL using trihydroxymethylamine (Tris) as a decomplexation agent. The self-assemble behavior of the amphiphilic copolymers was studied by fluorometry, TEM and laser light scattering. The morphology of the CS-O-PCL nanoparticles was found to be dependent on PCL grafting level. Both spherical micelles and vesicle could be formed by dialysis method.     

Chitosan-graft-poly(ϵ-caprolactone)s: An optimized chemical approach leading to a controllable structure and enhanced properties

A novel synthetic approach was developed for the controllable modification of chitosan (CS) with poly(ϵ-caprolactone) (PCL). 6-O-Triphenylmethyl-chitosan (TMCS) was synthesized as a highly soluble intermediate in organic solvents to facilitate an efficient grafting reaction of PCL onto CS in a homogeneous reaction medium. Subsequently, the syntheses of CS-g-PCL copolymers with different degrees of substitution (ds) and various chain lengths of PCL (number-average molecular weight = 1200–11,000) were carried out by a coupling reaction between the carboxylic terminal groups of PCL chains and the amino groups of TMCS. The successful grafting reaction was confirmed by GPC measurements, which indicated that the products were graft copolymers rather than physical blends. The ds, defined as the number of PCL chains per saccharide unit, of the graft copolymers could be adjusted simply by changes in the molar feed ratios of PCL to CS, and graft copolymers with different ds values ranging from 0.28 to 0.49 were synthesized, as calculated by ¹H NMR and elemental analysis. DSC and X-ray measurements showed that the melting temperature and enthalpy of the PCL grafts of these graft copolymers could be adjusted by the ds and the chains length of PCL, respectively. Meanwhile, the CS-g-PCL copolymers exhibited better solubility in various solvents, such as in chloroform for some of the resultant graft copolymers, than the original CS. Finally, nanoparticles of 100–200 nm, having hydrophobic PCL domains and cationic hydrophilic surfaces, were obtained through the self-assembly of the copolymers in selective solvents. These types of graft copolymers have great potential in various applications, such as targeted drug and gene delivery as well as tissue engineering. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2556–2568, 2007     

Chain entanglement,mechanical properties and drawability of poly(lactide)

The observed brittle fracture behavior of amorphous polylactides seems to be contradicted by the low value ofC =2 determined for poly(L-lactide) by Flory and coworkers. Such very flexible polymer chains deform by shear yielding, and fracture in a ductile manner. In this study,C was estimated in a number of ways, resulting in much higher values ofC =11.7 andC =9.1 for poly(L-lactide) and L- and D-lactide copolymers, respectively. These high values ofC and the low entanglement density account for the brittle fracture behavior of amorphous poly(lactide), as well as for the maximum attainable draw ratios of poly(L-lactide) networks and melt spun fibers. Bulk polymerized poly(L-lactide) networks, where crystallization during polymerization impedes severe entangling, could be hot-drawn most effectively to draw ratios of 8–16, resulting in very strong materials with tensile strengths of 550–805 MPa. By comparison, amorphous, non-crystallizable L/D lactide networks, which do not crystallize during polymerization, could be drawn less, to =7. These materials with strengths up to 460 MPa could, nevertheless, be oriented much more effectively than linear, amorphous L/D lactide copolymers.     

Nanosized Micelles Self-Assembled from amphiphilic dextran-graft-methoxypolyethylene glycol/poly(ε-caprolactone) copolymers

A series of amphiphilic copolymers, dextran-graft-methoxypolyethylene glycol/poly(ε-caprolactone) (Dex-g-mPEG/PCL) were synthesized by grafting both PCL and mPEG chains to dextran, and subsequently the micellar self-assembly behavior of resultant copolymers was investigated. PCL was designed by using Fmoc-protected valine other than organometallic catalyst as the initiator to ring-opening polymerize ε-caprolactone (CL) in view of the safety demand as well as the extra application potential resulting from -NH₂ group introduced after Fmoc deprotection. All the copolymers were characterized by ¹H NMR, FT-IR and GPC measurements. The prepared copolymers are capable of self-assembling into nanosized spherical micelles in aqueous solution with the diameter of around 100-200 nm determined by TEM image and DLS measurement. The critical micellar concentration (CMC) of the graft copolymers is in the range of 10-100 mg/L determined by the fluorescence robe technique using pyrene. The result also indicated that the CMC of self-assembled micelles could be adjusted by controlling the degree of substitution of mPEG and PCL, and these micelles may find great potential as drug carriers in biomedical fields.     

Synthesis and study of properties of linear permethylpoly(silane-siloxanes)

Heterofunctional polycondensation of ,-dichloropermethyloligosilanes Cl(Me₂Si) _m Cl (m = 2—6) with 1,5-dihydroxyhexamethyltrisiloxane was used to synthesize linear permethylpoly(silane-siloxanes) with the regular structure —[(SiMe₂) _m O(SiMe₂O)₃] _n —, which are soluble, unlike polydimethylsilane, in common organic solvents. The use of Py instead of Et₃N as an acceptor of HNl results in an increase in the yield, molecular weight, and characteristic viscosity of the copolymers. The molecular weight and viscosity characteristics, oxidative and thermal stabilities, and spectral properties of the synthesized copolymers were studied. The dependence of the oxidative and thermal stabilities of the synthesized copolymers on the number of the SiMe₂ units in the oligosilane fragment of the main chain was established.     

Synthesis and characterization of aba-type block copolymer of poly(ϵ-caproplactone) with poly(ethylene glycol), by mean of activation end groups

Poly(?-caprolactone)-b-poly(ethylene glycol)-b-poly(?-caprolactone) (PCL-b-PEG-b-PCL) triblock copolymer were synthesized by mean anionic activation of the hydroxyl end groups of poly(ethylene glycol) in presence of diphenylmethylsodium. Copolymers were characterized by SEC, FT-IR and ¹H-NMR spectroscopy, TGA and DSC. Size exclusion chromatographic analysis of obtained copolymers indicated incorporation of CL monomer into PEG without formation of PCL homopolymer. Characterization by FT-IR and ¹H NMR spectroscopy of the resulting polymeric products, with respect to their structure, end-groups and composition, showed that they are best described as ester-ether-ester triblock copolymers, whose compositions can be adjusted changing the feeding molar ratio of PEG to CL. The thermal stability of triblock copolymers was less that PEG precursor, but higher that PCL homopolymer. Analysis by mean DSC showed that all copolymers were semi-crystalline and their thermal behavior depending on their composition.     

Morphology of Compatibilized Ternary Blends

In this work, the evolution of the morphology of polypropylene/polystyrene/poly(methyl metacrylate) (PP/PS/PMMA) blends to which graft copolymers polypropylene-graft-polystyrene (PP-g-PS) of 2 compositions (55/45 and 70/30), polypropylene-graft-poly(methyl metacrylate) (PP-g-PMMA), or styrene-block-(ethylene- co-butadiene)-block-styrene (SEBS) was added has been studied. The ternary blends morphologies were predicted using phenomenological models that predict the morphology of ternary blends as a function of the interfacial tension between the blend components (spreading coefficient and free energy minimization). All blends studied presented a core-shell morphology with PS as shell and PMMA as core. The addition of PP-g-PS or SEBS resulted in a reduction of the size of the PS shell phase and, the addition of PP-g-PMMA did not seem to have any effect on the diameter of PMMA. The difference observed between the different morphologies relied on the number of droplets of core within the shell. All the phenomenological models predictions corroborated the experimental results, except when PP-g-PMMA was added to the blend.     

Enzymatic degradation of block copolymers obtained by sequential ring opening polymerization of l-lactide and ?-caprolactone

Copolymers of ?-caprolactone and l-lactide with different molar ratios were prepared via sequential ring opening polymerization (ROP) of both monomers. The resulting PCL-PLLA-PCL triblock copolymers were characterized by using NMR, SEC, DSC and XRD. One melting peak corresponding to the PCL block was detected, but the presence of PLLA decreased the crystallinity of PCL. Enzyme-catalyzed biodegradation of solution cast films was investigated at 37 °C in the presence of Pseudomonas lipase. It was observed that the PLLA component retarded the degradation of the block copolymer as compared to the PCL homopolymer. Therefore, the enzymatic degradation rate can be adjusted by varying the composition of the copolymers. ¹H NMR and SEC data showed no significant chemical composition or molecular weight changes during degradation, indicating that the degradation proceeded according to a surface erosion mechanism. ESEM confirmed surface erosion with appearance of a rugged morphology.