In situ formation of silver nanoparticles within an amphiphilic graft copolymer film

Silver nanoparticles were prepared by UV irradiation from silver salts, such as AgBF₄ or AgNO₃, when dissolved in an amphiphilic film of poly((oxyethylene)₉ methacrylate)‐graft‐poly((dimethyl siloxane)_n methacrylate), POEM‐g‐mPDMS. The in situ formation of silver nanoparticles in the graft copolymer film was confirmed by transmission electron microscopy (TEM), UV‐visible spectroscopy, and wide angle X‐ray scattering (WAXS). The results demonstrated that the use of AgBF₄ yielded silver nanoparticles with a smaller size (～5 nm) and narrower particle distribution when compared with AgNO₃. The formation of silver nanoparticles was explained in terms of the interaction strength of the silver ions with the ether oxygens of POEM, as revealed by differential scanning calorimetry (DSC) and X‐ray photoelectron spectroscopy (XPS). It was thus concluded that a stronger interaction of silver ions with the ether oxygens results in a more stable formation of silver nanoparticles, which produces uniform and small‐sized nanoparticles. DSC and small angle X‐ray scattering (SAXS) data also showed the selective incorporation and in situ reduction of the silver ions within the hydrophilic POEM domains. Excellent mechanical properties of the nanocomposite films (3–5 × 10⁵ dyn/cm²) were observed, mostly because of the confinement of silver nanoparticles in the POEM chains as well as interfaces created by the microphase separation of the graft copolymer film. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 1283–1290, 2007     

pH and glucose dually responsive injectable hydrogel prepared by in situ crosslinking of phenylboronic modified chitosan and oxidized dextran

Injectable hydrogels with pH and glucose triggered drug release capability were synthesized based on biocompatible phenylboronic modified chitosan and oxidized dextran through the formation of covalent imine bond and phenylboronate ester. Rheological characterization demonstrated that the gelation rate was rapid, and the moduli of the hydrogels were able to be tuned with chemical composition as well as pH and glucose concentration of the polymer solution. Anticancer drugs could be incorporated inside the hydrogel through the in situ gel forming process and undergo a controlled release by altering pH or glucose concentration. The hydrogels had good biocompatibility with viable and proliferated cells cultured in the three dimensional matrix, and the cell proliferation was suppressed when a small amount of DOX was added, which is benefit for the application of the hydrogels as smart anticancer drug delivery system. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1235–1244     

pH‐sensitive polymeric micelles based on amphiphilic polypeptide as smart drug carriers

A series of amphiphilic diblock copolymers having poly(ethylene glycol) (PEG) as one block and a polypeptide as the other block were synthesized by ring‐opening polymerization using PEG‐amine as a macroinitiator. These polymers were characterized by ¹H‐NMR and gel permeation chromatography. The influence of the substitution ratio of tertiary amine‐containing groups on the pH sensitivity of the polymers was investigated in detail. Core/shell‐structured micelles were fabricated from these polymers using an organic solvent‐free method. pH‐ and concentration‐dependent micellization behaviors were investigated by dynamic light scattering and fluorescence microscopy. Micelles loaded with doxorubicin, selected as a model drug, showed restricted drug release at physiological pH but accelerated drug release at tumor extracellular pH. Collectively, our findings suggest that these pH‐sensitive micelles might have great potential for cancer therapy applications. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 4175–4182     

Unprecedented diverse nanostructures formed by amphiphilic graft copolymer bearing PEO side chains synthesized by ATNRC

A series of well‐defined amphiphilic graft copolymers bearing hydrophilic poly(ethylene oxide) (PEO) side chains with tunable grafting densities were synthesized by atom transfer nitroxide radical coupling (ATNRC) reaction using CuBr/PMDETA as catalytic system via the grafting‐onto strategy. PEO side chains were linked to α‐C of carbonyl of polyacrylate‐based backbone, not to the ester side groups as usual, so that every repeating unit of the backbone possessed a pendant steric bulky tert‐butyl group. The critical micelle concentrations of the obtained amphiphilic graft copolymers in aqueous media determined by fluorescence probe technique using pyrene as probe increased with the raising of molecular weights. These amphiphilic graft copolymers with novel chemical structure showed unprecedented diverse nanostructures visualized by transmission electron microscopy in aqueous media and micellar morphologies varied with the changing of experiment parameters. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Delivery of active DACH-Pt anticancer species by biodegradable amphiphilic polymers using thiol-ene radical addition

A biodegradable and amphiphilic copolymer, mPEG-b-P(LA-co-MAC/TMA) that contains pendant 1,2-bidentate carboxyl groups is synthesized by thiol-ene radical addition and is further used to chelate with the active anticancer species (DACH-Pt) of oxaliplatin to form an mPEG-b-P(LA-co-MAC/TMA-Pt-DACH) complex. The polymer platinum complex can self-assemble into micelles. In vitro studies show that the DACH-Pt micelles display enhanced or comparable cytotoxicity against SKOV-3 and MCF-7 cancer cells, while they show reduced toxicity to HeLa cells compared with oxaliplatin.     

A starlike amphiphilic graft copolymer with hydrophilic poly(acrylic acid) backbones and hydrophobic polystyrene side chains

A well‐defined starlike amphiphilic graft copolymer bearing hydrophilic poly(acrylic acid) backbones and hydrophobic polystyrene side chains was synthesized by successive atom transfer radical polymerization followed by the hydrolysis of poly‐(methoxymethyl acrylate) backbone. A grafting‐from strategy was employed for the synthesis of a graft copolymer with narrow molecular weight distribution. Hydrophobic polystyrene side chains were connected to the backbones through stable C? C bonds. The poly(methoxymethyl acrylate) backbones can be easily hydrolyzed with HCl without affecting the hydrophobic polystyrene side chains. This kind of amphiphilic graft copolymer can form stable sphere micelles in water. The sizes of the micelles were dependent on the ionic strength and pH value. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3687–3697, 2007     

Y‐shaped poly(ethylene glycol) and poly(trimethylene carbonate) amphiphilic copolymer: Synthesis and for drug delivery

New Y‐shaped (AB₂‐type) amphiphilic copolymers of poly(ethylene glycol) (PEG) with poly(trimethylene carbonate) (PTMC), PEG‐b‐(PTMC)₂, were successfully synthesized by the ring‐opening polymerization (ROP) of TMC with bishydroxy‐modified monomethoxy‐PEG (mPEG). First, a bishydroxy functional ROP initiator was synthesized by esterification of acryloyl bromide with mPEG, followed by Michael addition using excess diethanolamine. A series of Y‐shaped amphiphilic PEG‐(PTMC)₂ block copolymers were obtained via ROP of TMC using this PEG with bishydroxyl end groups as macroinitiator and ZnEt₂ as catalyst. The amphiphilic block copolymers with different compositions were characterized by gel permeation chromatography (GPC) and ¹H NMR, and their molecular weight was measured by GPC. The results showed that the molecular weight of Y‐shaped copolymers increased with the increase of the molar ratio of TMC to mPEG‐(OH)₂ initiator in feed while the PEG chain length was kept constant. The Y‐shaped copolymer mPEG‐(PTMC)₂ could self‐assemble into micelles in aqueous medium and the critical micelle concentration values of the micelles decrease with increase in hydrophobic PTMC block length of mPEG‐(PTMC)₂. The in vitro cytotoxicity and controlled drug release properties of the Y‐shaped amphiphilic block copolymers were also investigated. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 8131–8140, 2008     

The effect of additives on naltrexone hydrochloride release and solvent removal rate from an injectable in situ forming PLGA implant

Biodegradable in situ forming drug delivery systems for naltrexone release are promising for post‐treatment of drug addicts. The effect of two different additives, glycerol and ethyl heptanoate, on the naltrexone hydrochloride release and solvent removal from a poly(DL ‐lactide‐co‐glycolide) (PLGA) injectable implant is presented in this article. The experimental results showed that the in vitro initial release of the drug was decreased in the presence of these additives. Ethyl heptanoate was, however, more effective than glycerol and increasing the amount of additives in PLGA solution up to 5% (w/w) resulted in a decrease of initial naltrexone release rate up to 50%. The morphological evaluation of implants using scanning electron microscopy indicated that the additives generated a less porous structure together with a finger‐like to sponge‐like transition. The solvent removal profiles of injectable implants, which can be well described by thermogravimetric and morphological analysis, were in good agreement with drug release profiles. Copyright © 2006 John Wiley & Sons, Ltd.     

Synthesis of amphiphilic graft copolymer brush and its use as template film for the preparation of silver nanoparticles

A microphase‐separated, amphiphilic graft copolymer consisting of a poly (vinyl chloride) (PVC) backbone and poly(oxyethylene methacrylate) (POEM) side chains, (PVC‐g‐POEM at 62:38 wt %) was synthesized via atom transfer radical polymerization (ATRP). Nuclear magnetic resonance (¹H NMR), FTIR spectroscopy, and transmission electron microscopy (TEM) clearly revealed that the “grafting from” method using ATRP was successful and that the graft copolymer molecularly self‐assembled into discrete nanophase domains of continuous PVC and isolated POEM regions. The self‐assembled graft copolymer film was used to template the growth of silver nanoparticles in solid state by introducing a AgCF₃SO₃ precursor and a UV irradiation process. The in situ formation of silver nanoparticles in the graft copolymer template film was confirmed by TEM, UV–visible spectroscopy, and wide angle X‐ray scattering. FTIR spectroscopy and X‐ray photoelectron spectroscopy also demonstrated the selective incorporation and in situ formation of silver nanoparticles within the hydrophilic POEM domains, presumably due to strong interactions between the silver and the ether oxygen in POEM. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3911–3918, 2008     

Novel vesicles self-assembled from amphiphilic star-armed PEG/polypeptide hybrid copolymers for drug delivery

A novel amphiphilic four‐armed [poly(ε‐benzyloxycarbonyl‐L ‐lysine)]₂‐block‐poly(ethylene glycol)‐block‐[poly(ε‐benzyloxycarbonyl‐L ‐lysine)]₂ hybrid copolymer has been prepared. The cytotoxicity study shows that the copolymer has good biocompatibility with no obvious inhibition effect on cell growth. The amphiphilic copolymers could self‐assemble to form vesicles in aqueous solution. DOX · HCl, as a hydrophilic drug, can be loaded into the vesicles, and then successfully internalized by human breast cancer MCF‐7 cells. Importantly, the DOX‐loaded vesicles show a greatly improved drug release behavior with a zero‐order release at the initial stage, suggesting a great potential as the carrier of hydrophilic drugs for controlled drug delivery.

     

Molecular Nanoworm with PCL Core and PEO Shell as a Non‐spherical Carrier for Drug Delivery

Core/shell wormlike polymer brushes with densely grafted poly(ϵ‐caprolactone)‐b‐poly(ethylene oxide) (PCL‐b‐PEO) are synthesized via grafting an alkynyl terminated PCL‐b‐PEO (ay‐PCL₁₇‐b‐PEO₁₁₃) onto a well‐defined azido functionalized polymethacrylate (PGA₉₄₀) and are evaluated preliminarily as a single molecular cylindrical vehicle for drug delivery. Water soluble molecular worms of ca. 230 nm are obtained and then the anticancer drug doxorubicin (DOX) is loaded into its PCL core by hydrophobic interaction. Compared with spherical micelles from linear PCL₁₇‐b‐PEO₁₁₃, the brushes demonstrate a lower loading efficiency but a faster release rate of DOX. Confocal laser scanning microscopy measurements show that DOX‐loaded cylindrical molecular brushes can easily enter into HeLa and HepG2 cells in 1 h.     

The Influence of Crosslinking Amylose-Methacrylic Acid Graft Copolymers on the Release of BSA

Summary: One of the biggest challenges in the drug delivery field is to obtain oral systems for the release of peptides and proteins, enabling their use as therapeutic agents for clinical applications. The aim of this work is to obtain biodegradable copolymers suitable for the development of matrices which offer controlled release of proteins to be administered orally.Graft copolymers of amylose-methacrylic acid were synthesized using different amounts of the crosslinker N, N′-methylenediacrylamide. The influence on the release profiles of bovine serum albumin (BSA) was researched.     

Encapsulation and/or release behavior of bovine serum albumin within and from polylactide-grafted dextran microspheres

Polylactide (PLA)-grafted dextran (Dex-graft-PLA) of various contents of sugar units was synthesized by anionic polymerization of L-lactide (L-LA) using the alkoxide of partially trimethylsilylated dextran (TMSDex) and subsequently removing the trimethylsilyl (TMS) groups. The copolymer showed different solubility from L-LA homopolymer with increasing the content of sugar units. We prepared bovine serum albumin (BSA)-loaded microspheres (MS)s according to a water-in-oil-in-water emulsion-solvent evaporation/extraction method using methylene chloride/DMSO as an organic cosolvent. MSs prepared from Dex-graft-PLA [MS(Dex-graft-PLA)s] exhibited higher loading efficiency of BSA than MSs prepared from PLLA [MS(PLLA)s]. The in vitro release rate of BSA from MS(Dex-graft-PLA) was faster than that from MS(PLLA). BSA released from MS(Dex-graft-PLA) maintained the secondary structure of native BSA to a great extent, compared with BSA released from MS(PLLA).     

Well‐defined amphiphilic graft copolymer consisting of hydrophilic poly(acrylic acid) backbone and hydrophobic poly(vinyl acetate) side chains

A series of well‐defined amphiphilic graft copolymers containing hydrophilic poly(acrylic acid) (PAA) backbone and hydrophobic poly(vinyl acetate) (PVAc) side chains were synthesized via sequential reversible addition‐fragmentation chain transfer (RAFT) polymerization followed by selective hydrolysis of poly(tert‐butyl acrylate) backbone. A new Br‐containing acrylate monomer, tert‐butyl 2‐((2‐bromopropanoyloxy)methyl) acrylate, was first prepared, which can be polymerized via RAFT in a controlled way to obtain a well‐defined homopolymer with narrow molecular weight distribution (M_w/M_n = 1.08). This homopolymer was transformed into xanthate‐functionalized macromolecular chain transfer agent by reacting with o‐ethyl xanthic acid potassium salt. Grafting‐from strategy was employed to synthesize PtBA‐g‐PVAc well‐defined graft copolymers with narrow molecular weight distributions (M_w/M_n < 1.40) via RAFT of vinyl acetate using macromolecular chain transfer agent. The final PAA‐g‐PVAc amphiphilic graft copolymers were obtained by selective acidic hydrolysis of PtBA backbone in acidic environment without affecting the side chains. The critical micelle concentrations in aqueous media were determined by fluorescence probe technique. The micelle morphologies were found to be spheres. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 6032–6043, 2009     

Synthesis of a well‐defined polyallene‐based amphiphilic graft copolymer via sequential living coordination polymerization and SET‐LRP

A well‐defined amphiphilic graft copolymer, poly(6‐methyl‐1,2‐heptadien‐4‐ol)‐g‐poly(2‐(dimethylamino)ethyl methacrylate) (PMHDO‐g‐PDMAEMA), has been synthesized by the combination of living coordination polymerization, single electron transfer‐living radical polymerization (SET‐LRP), and the grafting‐from strategy. PMHDO backbone containing double bonds and pendant hydroxyls was first prepared by [(η³‐allyl)NiOCOCF₃]₂‐initiated living coordination polymerization of 6‐methyl‐1,2‐heptadien‐4‐ol (MHDO) followed by treating the pendant hydroxyls with 2‐chloropropionyl chloride to give PMHDO‐Cl macroinitiator. SET‐LRP of 2‐(dimethylamino)ethyl methacrylate (DMAEMA) was performed in THF/H₂O using PMHDO‐Cl as macroinitiator and CuCl/Me₆TREN as catalytic system to afford the well‐defined PMHDO‐g‐PDMAEMA graft copolymer with a narrow molecular weight distribution (M_w/M_n = 1.28). The grafting density was as high as 92%. The critical micelle concentration (cmc) in water was determined by fluorescence probe technique and the micellar morphology was preliminarily explored by transmission electron microscopy. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

“Clip” and “Click” Chemistries Combination: Toward Easy PEGylation of Degradable Aliphatic Polyesters

α‐Methoxy‐ω‐alkyne poly(ethylene glycol) (PEG) was tagged with pendent N‐hydroxy‐succinimidyl activated esters by photografting of a molecular clip. This easily synthesized heterofunctional PEG was found to be a versatile building block for (i) conjugation with an amino derivative and (ii) grafting to azido functional aliphatic polyesters backbone by Huisgen's 1,3‐dipolar cycloaddition. This original combination of “clip” and “click” reactions provides a versatile and straightforward pathway for the synthesis of functional amphiphilic and degradable copolymers valuable for biomedical applications such as in drug‐delivery.