Determination of trace metals by capillary electrophoresis

A new analytical procedure is developed using a strong complexing agent, 1,10-phenanthroline (Phen), for direct UV detection of Zn, Mn, Cu, Co, Cd, and Fe at microg/L concentrations in environmental water samples. The metal chelates formed showed different electrophoretic mobilities and solved the comigration problem for capillary electrophoresis (CE) separation of free metal ions. To obtain stable metal-Phen chelates during the capillary zone electrophoresis (CZE) run, both pre-column and on-column complexation are required and threefold excess of Phen over metal ions should be added to the sample. The optimized background electrolyte (BGE) consists of 30 mM hydroxylamine hydrochloride and 0.1% methanol at pH 3.6. Under hydrodynamic sampling, CE run at + 20 kV in 65 cm x 0.05 mm ID fused-silica column with detection at 265 nm, baseline separation, satisfactory working ranges (10 microg/L to 5.5 mg/L), sensitive detection limits (1-3 microg/L), good repeatability for migration times (relative standard deviation, RSD 0.36-0.81%, n = 5), peak area (RSD 3.2-4.2%, n = 5) and peak height (RSD 3.2-4.5%, n = 5) were obtained for the metal cations investigated. The reliability of the method was established by parallel determination using the inductively coupled plasma-atomic emission spectrometry (ICP-AES) method giving results within statistical variation. The procedure developed is shown to provide a quick, sensitive, precise, and economic method for simultaneous determination of metal cations that can form stable chelates with Phen.     

Determination of metal ions by capillary electrophoresis using pre-column complexation with 1,10-phenanthroline

The capillary electrophoretic separation of Fe(II), Cu(II) and Zn(II) ions in an acidic buffer solution (pH 2.5) by complexation with 1,10-phenanthroline is investigated. As 1,10-phenanthroline is a neutral ligand, the positively charged metal complexes formed migrate in the same direction as the EOF, providing a rapid separation of metal ions in acidic buffers. The method was applied to the determination of metal ions in vitamin tablets. Received: 5 January 1998 / Revised: 27 March 1998 / Accepted: 15 May 1998     

Determination of metal ions by capillary electrophoresis using pre-column complexation with 1,10-phenanthroline

The capillary electrophoretic separation of Fe(II), Cu(II) and Zn(II) ions in an acidic buffer solution (pH 2.5) by complexation with 1,10-phenanthroline is investigated. As 1,10-phenanthroline is a neutral ligand, the positively charged metal complexes formed migrate in the same direction as the EOF, providing a rapid separation of metal ions in acidic buffers. The method was applied to the determination of metal ions in vitamin tablets. Received: 5 January 1998 / Revised: 27 March 1998 / Accepted: 15 May 1998     

On-column complexation of metal ions using 2,6-pyridinedicarboxylic acid and separation of their anionic complexes by capillary electrophoresis with direct UV detection

On-column complexation of metal ions with 2,6-pyridinedicarboxylate (2,6-PDC) to form anionic complexes enabled their separation by capillary zone electrophoresis with direct UV detection at 214 nm. Nine metal ions, Cu2+, Zn2+, Ni2+, Cd2+ Mn2+, Pb2+, Fe3+, Al3+ and Ca2+, were determined in less than 7 min using 10 mM 2.6-PDC solution containing 0.75 mM tetradecyltrimethylammonium bromide at pH 4.0. Satisfactory working ranges (20-300 microM), detection limits (3-10 microM) and good repeatability of the peak areas (RSD 2.1-4.2%, n=5) were obtained using hydrodynamic injection (30 s). The proposed method was used successfully for the determination of Mn2+, Fe3+, Al3+ and Ca2+ in groundwaters.     

Development and validation of capillary electrophoresis for the determination of selected metal ions in airborne particulate matter after sequential extraction

A capillary electrophoresis (CE) method has been developed and validated for the determination of the distribution of metals in particulate matter after three-stage sequential extraction. Fe(II), Zn(II), Cu(II), Mn(II), and Cd(II) ions were separated using a background electrolyte consisting of 200 mmol L(-1) ammonium acetate (pH 5.5), 0.5 mmol L(-1) 1,10-phenanthroline, 10 mmol L(-1) hydroxylamine hydrochloride, and 20% acetone. The method was validated with respect to specificity, linearity, detection limits, precision, and accuracy. Detection limits are at sub-microg L(-1) levels (tens of microg g(-1) of particulate matter) using pressure injection. The analytical procedure was checked by analyzing a standard reference material, NIST SRM 1648 Urban Particulate Matter.     

Simultaneous separation of nine metal ions and ammonium with nonaqueous capillary electrophoresis

A simple and fast method for simultaneous separation of nine metal cations Ni2+, Cu2+, Co2+, Zn2+ Cd2+, K+, Na+, Mg2+ and Ca2+, and NH4+ in methanol is reported. The optimization for separation these 10 cations was achieved by using 0.5% acetic acid and 10 mM imidazole as electrolyte. The effects of water and ionic strength in the sample are discussed. The sensitive detection of transition metal ions was accomplished at 191 nm. The optimized method demonstrated high efficiency and good reproducibility, and was applied successfully to the qualitative and quantitative determination of transition metal ions in water samples, chemical reagents, oral zinc gluconate solution and human plasma.     

Simultaneous determination of metal ions, amino acids, and other small biogenic molecules in human serum by capillary zone electrophoresis with transient isotachophoretic preconcentration

CE with indirect UV detection was used for the simultaneous determination of lithium, magnesium, calcium, creatinine, carnitine, and a number of amino acids in human serum. The target analytes, positively charged under acidic electrolyte conditions, were separated with positive separation voltage polarity using 10 mM 4-methylbenzylamine, 4.5 mM citric acid, 25% (v/v) methanol at pH 4.05 as background electrolyte providing optimal separation. When analyzing real samples, however, some peaks were broadened due to essentially destacking conditions. In order to maintain the separation efficiency and also enhance the detection sensitivity, transient isotachophoresis (tITP) sample stacking was applied and yielded theoretical plate numbers in the range from 160,000 (arginine) to 350,000 (creatinine). The limit of detection values with tITP preconcentration were 0.11-0.26 mg L(-1) for metal cations, 1.0 mg L(-1) for creatinine, and 1.3-3.9 mg L(-1) for histidine, lysine, arginine, and ornithine. The method precision for peak areas was from 0.4 to 5.0% relative standard deviation using the matrix sodium as internal standard. The accuracy of the developed tITP-CZE system was verified by consistent results for Li+, Mg2+, Ca2+, and creatinine obtained on analyzing two serum certified reference materials. The only sample preparation required was ultrafiltration and acidification (to release protein-bound alkaline earths), and working ranges for individual analytes corresponded well to clinical concentration ranges.     

Use of miniaturised isotachophoresis on a planar polymer chip to analyse transition metal ions in solutions from metal processing plants

An electrolyte system, using malic acid as a complexing agent, has been developed to allow the determination of transition metal cations using miniaturised isotachophoresis. The method allowed the simultaneous determination of Mn2+, Cr3+, Fe2+, Co2+, Zn2+ and Ni2+ to be made without interference from other common ions. Limits of detection were calculated to be in the range 0.5-1.0mg l(-1) for Mn2+, Cr3+ Co2+ and Zn2+ and 2.0 mg l(-1) for Fe2+ and 4.7 mg l(-1) for Ni2+. The successful analysis of five industrial samples, containing a range of these metal ions, obtained from metal processing plants were achieved in under 13 min. The separations were performed on a poly(methyl methacrylate) chip with integrated platinum wire conductivity detection electrodes.     

Capillary electrophoretic determination of thiosulfate,sulfide and sulfite using in-capillary derivatization with iodine

A new capillary electrophoresis (CE) method was developed for the rapid, simple and selective determination of thiosulfate, sulfide and sulfite species. The proposed method is based on the in-capillary derivatization of separated sulfur anions by mixing their zones with the iodine zone during the electrophoretic migration and direct UV detection of iodide formed. The optimal conditions for the separation and derivatization reaction were established by varying electrolyte pH, electrolyte counter-ion, concentration of iodine, and applied voltage. The optimized separations were carried out in 20 mmol/L Tris-chloride electrolyte (pH 8.5) using direct UV detection at 214 nm. All three sulfur species were well resolved in less than 4 min. The method gives repeatability comparable or even better than this obtained for sulfur anions using standard CE technique. The proposed CE system was applied to the monitoring of sulfur anions in spent fixing solutions during the electrolytic oxidation.     

On-column complexation capillary electrophoretic separation of Fe2+ and Fe3+ using 2,6-pyridinedicarboxylic acid coupled with large-volume sample stacking

On-column complexation of Fe2+ and Fe3+ with 2,6-pyridinedicarboxylic acid (2,6-PDCA) formed anionic complexes, which were then separated by capillary zone electrophoresis with direct UV detection at 214 nm. To achieve reasonable separation selectivity and on-column complexation, the conditions such as pH, the concentration of 2,6-PCDA and the EOF modifiers in the electrolyte were examined. The electrolyte contained 5.0 mM 2,6-PDCA, 0.25 mM tetradecyltrimethlammonium bromide (TTAB) and 5% (v/v) acetonitrile at pH 4.0 was optimised for on-column complexation and the separation of Fe[PCDA]2(2-) and Fe[PCDA]2(-). To enhance the detection sensitivity, large-volume sample stacking (LVSS) was used for the on-line preconcentration of Fe[PCDA]2(2-) and Fe[PCDA]2(-). Under the optimised conditions, satisfactory working ranges (0.5-50 microM), lower detection limits (less than 0.1 microM) and good repeatability of the peak areas (R.S.D.: 5.2-7.8%, n = 5) was achieved using LVSS (300 s). With LVSS, the detection sensitivity was enhanced more than 50-fold compared to conventional hydrodynamic injection. The proposed method was used successfully for the determination of Fe2+ and Fe3+ in water samples.     

Speciation of Co(II), Co(III), and Cu(II) in ethylenediamine solutions by capillary electrophoresis

A capillary electrophoretic (CE) method for the speciation of Co(II), Co(III), and Cu(II) in electroless copper-plating baths containing ethylenediamine (En) has been developed. The method is based on the selective pre-capillary derivatization of Co(II) with 1,10-phenanthroline (Phen) followed by CE separation of stable [CoPhen(3)](2+), [CoEn(3)](3+), and [CuEn(2)](2+) chelates. The proposed derivatization procedure protects Co(II) from oxidation by dissolved oxygen and enables rapid determination of all three metal species within a single run. The optimized separations were carried out in a fused silica capillary (57 cmx75-microm I.D.) filled with an ethylenediamine sulfate electrolyte (20 mmol L(-1) H(2)SO(4), pH 7.0 with En, applied voltage +30 kV) using direct UV detection at 214 nm. The detection limits for a signal-to-noise ratio of 3 and 10 s, hydrodynamic injections were 5x10(-6) mol L(-1) for Cu(II), 1x10(-6) mol L(-1) for Co(III), and 4x10(-7) mol L(-1) for Co(II). Application of the method to the speciation of Co(II), Co(III), and Cu(II) in copper-plating bath samples is also demonstrated.     

Capillary electrophoretic separation between Fe(II) and Ni(II) precomplexed with 1,10-phenanthroline in a high concentration buffer of n-butyric acid/ n-butyrate and its application

The capillary electrophoretic separation was accomplished for Fe(II) and Ni(II) precomplexed with 1,10-phenanthroline (phen) in 2 M n-butyric acid/ n-butyrate buffer at pH 4.5 with direct UV detection at 260 nm. The applied voltage was 5 kV. The high concentration buffer of the n-butyrate resulted in a similar separation mechanism to that of ion-pair reversed-phase high-performance liquid chromatography. The separation would be due to the hydrophobic interaction between the ionic associates, [Fe(phen)(3)]( n-butyrate)(+) and [Ni(phen)(3)]( n-butyrate)(+), with the n-butyrate ion and n-butyric acid as background electrolyte. Linear calibration ranges were obtained for Fe(II) and Ni(II) from 100 to 500 ng ml(-1). The relative standard deviations ( n=10) for 3 g mL(-1) Fe(II) and Ni(II) were 0.090 and 0.086, respectively. Detection limits ( S/ N=3) for Fe(II) and Ni(II) were 20 ng mL(-1). The method was applied to the determination of nickel in aluminium and duralumin alloys.     

毛细管区带电泳分析水中阳离子

选用一种新的缓冲液体系，采用毛细管区带电泳法，同时分离水中铵奶离子及碱金属、碱土金属和过渡金属等１２种分属不同类型的阳离子，并对电泳分离用金属阳离子弱络合剂、电解质ＰＨ值作了研究。方法用于环境水样分析，获得了满意效果。     

Determination of chelating agents and metal chelates by capillary zone electrophoresis

Aminopolycarboxylic acids such as diethylenetriaminepentaacetic acid (DTPA) are commonly used as chelating agents in many pulp and paper industries, particularly as scavengers of metal ions which catalyze the decomposition of hydrogen peroxide used as a bleaching agent. Concern for the effect of waste DTPA in the aquatic environment has led to a need for the development of methods to determine its levels in waste water. This paper describes the determination of free DTPA and several metal-DTPA complexes in water and waste water by capillary zone electrophoresis. The optimization of separation conditions included the selection of an appropriate carrier electrolyte composition (pH, organic solvents, ion-pairing reagents) and the systematic investigations of selective complexation of free DTPA as well as metal exchange reactions for metal-DTPA complexes in order to achieve selective and sensitive direct UV detection. The determination of DTPA in waste water from a paper mill was possible in the low ppm range.     

Structural Diversity and Thermochromic Properties of Iodobismuthate Materials Containing d-Metal Coordination Cations: Observation of a High Symmetry [Bi(3)I(11)](2-) Anion and of Isolated I(-) Anions

Six new inorganic-organic salts, all containing iodobismuthate anions and d-metal coordination cations, were synthesized solvothermally from reactions of bismuth iodide, a transition metal (M) nitrate salt (M = Co, Fe or Zn), and a heterocyclic, chelating organic ligand: 1,10-phenanthroline (1,10-phen), 3,4,7,8-tetramethyl-1,10-phenanthroline (TMphen), or 2,2':6',2'-terpyridine (tpy). All six compounds were structurally analyzed by single crystal X-ray diffraction, including variable temperature crystallographic analysis to monitor for structural changes. Furthermore, those containing novel anions and achieved in high yield were additionally characterized by solid-state UV visible spectroscopy at room temperature. [Co(1,10-phen)(3)][Bi(3)I(11)] (1), [Fe(1,10-phen)(3)][Bi(3)I(11)] (2), and [Zn(1,10-phen)(3)][Bi(3)I(11)] (3) are isostructural. They crystallize in the monoclinic space group P2(1)/n and contain the unprecedented iodobismuthate anion, [Bi(3)I(11)](2-), which exhibits near D(3h) symmetry and has an unusual arrangement of three cis face-sharing BiI(6) octahedra. [Co(TMPhen)(3)](2)[Bi(2)I(9)][I] (4), which crystallizes in the trigonal space group P-31c, and [Co(tpy)(2)](2)[Bi(2)I(9)][I] (5) and [Zn(tpy)(2)](2)[Bi(2)I(9)][I] (6), which are isostructural and crystallize in the monoclinic space group C2/c, contain the discrete binuclear [Bi(2)I(9)](3-) anion, common in previously reported iodobismuthate compounds. In addition they contain unusual isolated I(-) anions, which are rarely encountered in iodobismuthate phases. Compounds 1-6 show constitutional similarities while utilizing different organic ligands and illustrate the sensitive dependence of reaction conditions on the identity of the halometalate anion formed. Additionally, all six compounds and the starting material BiI(3) are thermochromic; the origin of this behavior is spectroscopically and crystallographically investigated.     

Using capillary electrophoresis to separate trivalent f-elements based on their speciation when complexed with simple organic ligands

Capillary electrophoresis (CE) is a useful method for rapid separations of metal cations. Under ideal conditions, CE can provide complete separation of the trivalent lanthanides in less than 10 min. Simple organic ligands must be included in the electrolyte matrix to achieve good resolution between the cations. In this paper, we demonstrate how to use complexation constants from the literature to design separation protocols for the trivalent f-elements.     

Simultaneous kinetic determination of Fe(III) and Fe(II) by H-point standard addition method

The H-point standard addition method (HPSAM) was applied to kinetic data for simultaneous determination of Fe(III) and Fe(II) or selective determination of Fe(III) in the presence of Fe(II). The method is based on the difference in the rate of two processes; reduction of Fe(III) with Co(II) and subsequent complex formation of resulted Fe(II) with 1,10-phenanthroline, and direct complex formation between Fe(II) and 1,10-phenanthroline in pH 3 and cetyl trimethyl ammonium bromide, CTAB, micellar media. Fe(III) can be determined in the range of 0.75-5.13 mug ml(-1)with satisfactory accuracy and precision in the presence of excess Fe(II) under working conditions. The proposed method was successfully applied to the simultaneous determination of Fe(III) and Fe(II) and also to the selective determination of Fe(III) in the presence of Fe(II) in several synthetic mixtures containing different concentration ratios of Fe(III) to Fe(II).     

CE of phytosiderophores and related metal species in plants

Phytosiderophores (PS) and the closely related substance nicotianamine (NA) are key substances in metal uptake into graminaceous plants. Here, the CE separation of these substances and related metal species is demonstrated. In particular, the three PS 2'-deoxymugineic acid (DMA), mugineic acid (MA), and 3-epi-hydroxymugineic acid (epi-HMA), and NA, are separated using MES/Tris buffer at pH 7.3. Moreover, three Fe(III) species of the different PS are separated without any stability problems, which are often present in chromatographic analyses. Also divalent metal species of Cu, Ni, and Zn with the ligands DMA and NA are separated with the same method. By using a special, zwitterionic CE capillary, even the separation of two isomeric Fe(III) chelates with the ligand ethylenediamine-N,N'-bis(o-hydroxyphenyl)acetic acid (EDDHA) is possible (i.e., meso-Fe(III)-EDDHA and rac-Fe(III)-EDDHA), and for fast separations of NA and respective divalent and trivalent metal species, a polymer CE microchip with suppressed EOF is described. The proposed CE method is applicable to real plant samples, and enables to detect changes of metal species (Cu-DMA, Ni-NA), which are directly correlated to biological processes.     

Metal Ion Chelation Chromatography on Complexon Sorbed Stannic Silicate

Abstract

Stannic silicate has been sorbed with complexones like xylenol orange, eriochrome black T and 1,10-phenanthroline for use as a chelate ion exchanger. The sorption capacity for different metals has been worked out. Kd values have been determined. Xylenol orange was used for the separation of Th(IV) from Cd(II) and Zn(II) and Cu(II) from Cd(II) and Zn(II), 1,10 phenanthroline for the separation of Fe(II) from Fe(III). These separations are based on the stabilities of the various complexes formed by the interaction of metal inns with complexones. By elution of metal ions which forms less stable complexes with the complexones no evidence of complexing agent in the eluate was found.     

On-column complexation and simultaneous separation of vanadium(IV) and vanadium(V) by capillary electrophoresis with direct UV detection

An on-column complexation method has been developed for the simultaneous determination of V(IV) and V(V). Vanadium species were chelated with aminopolycarboxylic acids to form anionic complexes which were separated by capillary zone electrophoresis (CZE) with direct UV detection. Ethylenediaminetetraacetic acid (EDTA), diethylenetriaminepentacetric acid (DTPA), nitrilotriacetic acid (NTA), and N-2-hydroxyethylethlendiaminetriacetric acid (HEDTA) were investigated as both ligand and running electrolyte. Of the ligands studied the complexes of EDTA with V(IV) and V(V) resulted in the highest selectivity and UV response.The conditions used for on-column complexation and separation, including pH, and electrolyte ligand concentration, were examined to achieve reasonable separation selectivity and detection sensitivity. The optimum separation of the anionic forms of V(IV) and V(V) was obtained by use of CZE with UV detection at 185 nm and an electrolyte containing 5 mmol L(-1) EDTA at pH 4.0. Linear calibration plots were obtained in the concentration range10-300 micro mol L(-1); detection limits were 3 micro mol L(-1) for V(IV) and 1 micro mol L(-1) for V(V). The proposed method was demonstrated for the determination of vanadium in groundwater spiked with V(IV) and V(V).