The first example of linear peptides containing a N-trifluoroethylated backbone amide linkage and the surprising solution dynamics observed by F NMR

The α-amino group of (l)phenylalanine methyl ester was trifluoroethylated using (2,2,2-trifluoroethyl)phenyliodonium N,N-bis(trifluoromethylsulfonyl)imide. A dipeptide Gly(l)Phe containing a trifluoroethylated peptide bond was synthesized by removing the α-amino proton of N^α-trifluoroethyl (l)phenylalanine methyl ester followed by coupling with N^α-phthaloyl glycine acid fluoride. The dipeptide was further coupled with (l)leucine methyl ester under conventional carboxyl activation conditions to provide two diastereomers of the tripeptide Gly(d,l)Phe(l)Leu. The solution dynamic behavior of the tripeptide was investigated as a function of solvents, by NOESY and variable temperature (VT) ¹⁹F NMR experiments.     

Synthesis and characterization of a tetraruthenium butterfly cluster containing a quadruply-bridging ligand derived from an N,N′-dipyrid-2-ylurea

The tetraruthenium cluster complex [Ru₄(μ₄-κ⁴-dmpu)(CO)₁₀], H₂dmpu = N,N′-bis(6-methylpyrid-2-yl)urea, has been prepared by treating [Ru₃(CO)₁₂] with H₂dmpu in toluene at reflux temperature. An X-ray diffraction study has determined that this cluster has a butterfly metallic skeleton hold up by a doubly-deprotonated N,N′-bis(6-methylpyrid-2-yl)urea ligand (dmpu). This ligand has the pyridine N atoms attached to the wing-tip Ru atoms and the amido N atoms spanning Ru-Ru wing-edges, in such a way that the cluster has C₂ symmetry. The donor atoms of doubly-deprotonated N,N′-dipyrid-2-ylureas seem to be appropriately arranged to hold butterfly tetranuclear clusters.     

Cyanosilylation of aldehydes catalyzed by N-heterocyclic carbenes

N-Heterocyclic carbenes produced in situ from salts of imidazolium, benzimidazolium, pyrido[1,2-c]imidazolium, imidazolinium, thiazolium, and triazolium catalyze the addition of trimethylsilylcyanide to aldehydes to yield cyanohydrin trimethylsilyl ethers. The use of C₂-symmetric imidazolidenyl carbene derived from (R,R)-1,3-bis[(1-naphthyl)ethyl]imidazolium chloride led to enantioselective cyanosilylation.     

Polyisobutylene-supported N-heterocyclic carbene palladium catalysts

This paper describes how the nonpolar polymer polyisobutylene (PIB) can be used as a handle to prepare PIB-bound NHC ligands that are soluble in monophasic mixtures of mixed solvents but phase separable when such solvent systems are perturbed to be biphasic. The results here show that such PIB-bound NHC ligands can be used to synthesize useful palladium catalysts. In this paper, both PIB-bound analogs of an N,N′-bis(2,6-diisopropylphenyl) heterocyclic carbene and simpler N,N′-dialkyl heterocyclic carbene ligand were prepared and were successfully used to form palladium cross-coupling catalysts. The reactivity, recycling and reusability of these catalysts has been examined.     

Fluorination of alcohols and diols with a novel fluorous deoxy-fluorination reagent

We prepared a novel fluorous deoxy-fluorination reagent N,N-diethyl-α,α-difluoro-[3,5-bis(1H,1H,2H,2H-perfluorodecyl)benzyl]amine (1b) from 3,5-diiodobenzoic acid (3b) via N,N-diethyl-3,5-bis(1H,1H,2H,2H-perfluorodecyl)benzamide (2b) in four steps and used it for the fluorination of alcohols and diols. After the fluorination reactions, the isolation of the products and recovery of 2b was performed by extraction with a fluorous/organic solvent system.     

Imidazolium-based chiral ionic liquids: synthesis and application

Synthesis of chiral ionic liquids containing an imidazole nucleus and chiral centers on N-substituents is reported. [(2S,3S)-2,3-Dihydroxybutane-1,4-bis(3-butylimidazolium)]-[bis(trifluoromethanesulfonyl)amide]₂ and [(4S,5S)-2-phenyl-1,3-dioxolane-4,5-bis(1-methylimidazolium)]-[bis(trifluoromethanesulfonyl)amide]₂ induced enantioselectivity in the Michael addition of malonic esters to chalcones.     

Unexpected course of rearrangement of substituted S-(1(3H)-isobenzofuranone-3-yl)isothiuronium bromides

Three series of S-(1(3H)-isobenzofuranone-3-yl)isothiuronium bromides differing in substitution at the isothiuronium moiety (none, one or two methyl groups) and at the benzene ring were prepared and characterized. These salts were then treated with various bases (acetate, triethylamine, Na₂CO₃) to give either 1-hydroxy-3-oxo-1,3-dihydro-2H-isoindol-2-carbothioamides or the product of S to N isobenzofuranone-3-yl migration, i.e., 1,3-dimethyl-1-(3-oxo-1,3-dihydro-2-benzofuran-1-yl)thioureas. If ammonia was used in reaction with N,N′-dimethyl isothiuronium salts then 3-hydroxy-2,3-dihydro-1H-isoindol-1-ones were formed together with 1,3-dimethyl-1-(3-oxo-1,3-dihydro-2-benzofuran-1-yl)thioureas in parallel reaction with the yields increasing with ammonia concentration. The formation of isoindolones takes place in two steps with an aldehyde intermediate, which can be trapped with N,N-dimethylhydrazine.     

Novel synthesis of α-nitroalkenes from nitroalkanes via halogenation of intermediate N,N-bis(silyloxy)enamines

An approach to conjugated nitroalkenes via oxidation of N,N-bis(silyloxy)enamines with bromine or iodine in the presence of tetra-n-butylammonium acetate is described. The acetate ion plays a key role by acting as a mild desilylating reagent. This new strategy allows the synthesis of α-nitroalkenes from the corresponding nitroalkanes.     

Facile synthesis of C-phosphanylformamidines via a carbene pathway

A direct synthetic approach to C-phosphanyl-N,N-dialkyl-N′-aryl(alkyl)-formamidines was developed. It was shown that phosphorylation of the formamidines proceeds at the nitrogen atom affording N-phosphanylformamidinium salts. Upon deprotonation, these salts gave C-phosphanylformamidines via formation of carbenes followed by a 1,2-phosphorus shift.     

New N-heterocyclic carbene mercury(II) complexes: Close mercury-arene interaction

Mononuclear mercury complexes (1, 2, and 3) bearing bis-N-heterocyclic carbene (NHC) ligands of the form [(NHC)₂-μ-Hg]⁺² have been prepared and structurally characterised. The complexes were derived from three bis-imidazolium salts as precursors to NHC; either 1,3-bis(N-methylimidazolium-1-ylmethyl)benzene bis(hexafluorophosphate) (I·2PF₆), 1,3-bis(N-butylimidazolium-1-ylmethyl)benzene bis(hexafluorophosphate) (II·2PF₆) or 3,5-bis(N-butylimidazolium-1-ylmethyl)toluene bis(hexafluorophosphate) (III·2PF₆) treated with mercury(II) acetate. Interestingly X-ray crystal structure analysis revealed a close interaction between the Hg metal centre with one carbon atom of the aryl linker in addition to coordination with two NHCs.     

Enantioselective electrophilic fluorination: a study of the fluorine-transfer from achiral N-F reagents to cinchona alkaloids

A transfer fluorination on cinchona alkaloids with the aid of achiral N-F fluorine-transfer reagents is described. Ten commercially available reagents were evaluated. Selectfluors™ 9 and 10, Accufluor™ 11, N-fluorobenzenesulfonimide (NFSi) 13, and N-fluoro-2,6-dichloropyridinium tetrafluoroborate 17 are effective fluorine-transfer reagents. The N-fluoroammonium salts of cinchona alkaloids thus prepared were employed in the construction of stereogenic fluorinated carbon centers with enantioselectivity as high as 85%. We also demonstrated that ionic liquids are effective “green” solvents for the development of this methodology.     

Synthesis of N,N-diethyldithiocarbamate functionalized 1,4-polyisoprene, from natural rubber and synthetic 1,4-polyisoprene

N,N-Diethyldithiocarbamate functionnalized 1,4-polyisoprenes were prepared from 1,4-polyisoprenes (natural or synthetic). The syntheses were performed by nucleophilic addition of N,N-diethyldithiocarbamate salts upon oxirane rings of epoxidized units according to a SN2 mechanism with ring opening. Studies on model molecules of epoxidized 1,4-polyisoprene units (1,2-epoxy-1-methylcyclohexane and 4,5-epoxy-4-methyloctane) were previously achieved to develop the procedure. The best yields were obtained at low temperature in polar medium, and more especially in water with sodium N,N-diethyldithiocarbamate (DEDT-Na) as reagent. A diastereospecific addition was noted when reaction was performed in water with DEDT-Na. Afterwards, the developed procedure was successfully generalized to epoxidized synthetic polyisoprenes and epoxidized natural rubber (in THF, then in latex medium). Excellent results were obtained in latex medium with epoxidized natural rubber (ENR) latices. As with the models, a diastereospecific addition of sodium N,N-diethyldithiocarbamate trihydrate onto epoxidized 1,4-polyisoprene units of ENR was observed at the condition to bring the latex medium to pH 8 before introduction of DEDT-Na. Influence of temperature, drc, and DEDT-Na concentration were successively examined to determine the best conditions of the addition on ENR latices.     

N,N,N′-Trialkyl-1,8-diaminonaphthalenes: convenient method of preparation from protonated proton sponges and the first X-ray information

A simple procedure for the synthesis of N,N,N′-trialkyl-1,8-diaminonaphthalenes is described. It consists in partial demethylation (dealkylation) of commercially available proton sponge [1,8-bis(dimethylamino)naphthalene] and some of its derivatives at heating with HBr-KI-DMF system. Limitation, scope and a possible mechanistic pathway for the reaction are discussed. For isomeric 8-dimethylamino-1-methylamino- and 1-dimethylamino-8-methylamino-4-nitronaphthalenes, X-ray measurements have been conducted. The first examples of complete realkylation reactions in the naphthalene proton sponges are reported.     

Mononuclear hydridocarbonyl ruthenium complexes incorporating N2O2 bis-chelating ligands

The reactions of [RuH(CO)Cl(PPh₃)₃] with N,N^′-bis(salicylidine)-hydrazine (H₂bsh) and N,N^′-bis(salicylidine)-p-phenylene diammine (H₂bsp) in presence of KOH in methanol led in the formation of neutral mononuclear complexes with the formulations [RuH(CO)(PPh₃)₂(L)] (LHbsh or Hbsp). These present the first examples where the ligands H₂bsh or H₂bsp provide only two of its available donor sites for interaction with the metal centre. The complexes have been characterized by elemental analyses, FAB-MS, IR, ¹H, ¹³C, ³¹P NMR and electronic spectral studies. Molecular structure of the representative complex [RuH(CO)(PPh₃)₂(Hbsh)] have been determined by single crystal X-ray analysis.     

10b-Substituted hexahydropyrrolo-isoquinolines: studies on diastereoselective formation of a quaternary carbon stereocenter via N-acyliminium ion cyclization

The stereoselective synthesis of hexahydro-pyrroloisoquinolines with a quaternary carbon stereocenter is described. The presented methodology employs the addition of a Grignard reagent to the carbonyl group of imide 1, derived from l-tartaric acid, followed by acetylation and BF₃·Et₂O induced cyclization. The acetylation-cyclization sequence can be run either as a one-pot process, or stepwise in a selected solvents. The crucial step, an acid-catalyzed carbon-carbon bond-forming reaction via an N-acyliminium ion offers high stereoselectivity, which has been shown to be strongly dependent on the size of the R¹ substituents and the reaction conditions, that is, choice of solvent, amount of a Lewis acid, temperature, and concentration of the substrate. Based on the results observed, participation of solvent in the cyclization, via an N-acyliminium cation is proposed.     

Copper-based reverse ATRP process of styrene in mixed solvents

Xylene/N,N-dimethylformamide (DMF) and xylene/ethanol were employed as mixed solvents, respectively, for the reverse atom transfer radical polymerization (R-ATRP) of styrene with the azobisisobutyronitrile (AIBN)/CuBr₂/N,N,N′,N′′,N′′-pentamethyldiethylenetriamine (PMDETA) initiating system. With a limited amount of DMF added in, CuBr₂/PMDETA complex could dissolve well in the reaction system, so the control of polymerization was enhanced compared with the one in which simplex xylene was used as solvent. But the polarity of DMF leaded kinetics to deviation from first order. Ethanol could also improve the solubility of catalyst and be scavenged quickly by argon at 110°, therefore the impact of polarity of solvent on kinetics was negligible. Induction periods were not observed here indicating rapidly establishment of equilibrium between Cu(I) and Cu(II). This method that adding a little amount of polar solvent with low boiling point into non-polar solvent gives a new way to solve the problem of poor solubility of the catalyst in R-ATRP.     

3,3-Bis(3,5-dimethylpyrazol-1-yl)propionic acid: A tripodal N,N,O ligand for manganese and rhenium complexes - Syntheses and structures

The tripodal N,N,O ligands 3,3-bis(3,5-dimethylpyrazol-1-yl)propionic acid (Hbdmpzp) (1) and 3,3-bis(pyrazol-1-yl)propionic acid (Hbpzp) (2) form the “missing link” between the well-known bis(pyrazol-1-yl)acetic acids and related ligands with a longer “carboxylate arm”. To illustrate the reactivity of this ligand, manganese and rhenium complexes bearing the ligand bdmpzp are reported. The complexes are compared to related compounds bearing other tripod ligands such as bis(3,5-dimethylpyrazol-1-yl)acetate (bdmpza) and 3,3-bis(1-methylimidazol-2-yl)propionate (bmip). Spectroscopic and structural data are used as a basis for comparison, as well as DFT calculations. Both ligands 1 and 2 and the complexes fac-[Mn(bdmpzp)(CO)₃] (3) and fac-[Re(bdmpzp)(CO)₃] (4) were characterised by X-ray crystallography.     

1-(N-Acylamino)alkyltriphenylphosphonium salts as synthetic equivalents of N-acylimines and new effective α-amidoalkylating agents

1-(N-Acylaminoalkyl)triphenylphosphonium salts 2a-f on reaction with DBU in MeCN are transformed into 1-(N-acylaminoalkyl)amidinium salts 3a-f. Amidinium salts 3d-f with a proton at the β-position undergo slow tautomerization into the corresponding enamides 6d-f. The same 1-(N-acylamino)alkyltriphenylphosphonium salts 2d-f in the presence of Hünig’s base are transformed directly into the corresponding enamides. Phosphonium salts 2, amidinium salts 3, and enamides 6 react with dialkyl malonates in the presence of DBU to give the corresponding amidoalkylation products. α-Amidoalkylation of dialkyl malonates is not observed in the presence of (i-Pr)₂EtN, yet proceeds well under these conditions with more acidic nucleophiles, for example, phthalimide or benzyl mercaptan.     

Synthesis of tris(β,β,γ-oximinoalkyl)amines from aliphatic nitro compounds and methyl vinyl ketone

A general strategy for the assembly of previously unknown tris(β,β,γ-oximinoalkyl)amines from aliphatic nitro compounds and methyl vinyl ketone is described. The strategy involves N,N-bis(siloxy)enamines as key intermediates. The latter are accessible by double silylation of alkylnitro compounds. Nickel(II) and copper(II) complexes of tris(β,β,γ-oximinoalkyl)amines are prepared and structurally characterized.     

Nucleophilic alkynylation of N-bis(trimethylsilyl)methyl aldimines

N-Bis(trimethylsilyl)methyl aldimines undergo nucleophilic addition reaction with premixed lithium alkynides/BF₃·OEt₂ to give moderate to good yields of N-bis(trimethylsilyl)methyl propargyl amines.