铑催化合成气转化为乙醇反应中甲酰基中间体的化学捕获

本文采用化学捕获法对铑基催化剂上合成气转化反应中的甲酰基中间体进行了化学捕获,在CO+2D_2反应后,用CH_3I进行的化学捕获反应中生成了CH_3CHO、CH_3CDO两种形式的乙醛;补充的Ar吹扫实验显示DCO的甲基化反应对生成的CH_3CDO有重要贡献。因此,甲酰基的确是合成气反应中的C_1含氧中间体。根据这一结果,初步探讨了合成气反应中CH_x物种的生成途径。     

Determination of force fields for formaldehyde,acetaldehyde and acetone by the CNDO/force method

CNDO/Force calculations have been done for formaldehyde, acetaldehyde and acetone, and the theoretical force fields evaluated. Experimental force fields are obtained from vibrational frequencies using the least-squares refinement method. The initial force fields considered are based on the bending and interaction force constants obtained from the CNDO/Force calculations and the stretching force constants transferred from chemically related molecules. Vibrational frequencies of H₂CO, D₂CO, HDCO, H₂¹³CO and D₂¹³CO for formaldehyde, CH₃CHO, CH₃CDO, CD₃CHO, CD₃CDO and CH₂DCHO for acetaldehyde, and CH₃COCH₃ CD₃COCH₃ and CD₃COCD₃ for acetone are employed in the force field refinements. The final force fields obtained are found to be reasonable with respect to the diagonal and interaction force constants.     

Reaction of H + ketene to formyl methyl and acetyl radicals and reverse dissociations

Thermochemical properties for reactants, intermediates, products, and transition states important in the ketene (CH₂?C?O) + H reaction system and unimolecular reactions of the stabilized formyl methyl (C·H₂CHO) and the acetyl radicals (CH₃C·O) were analyzed with density functional and ab initio calculations. Enthalpies of formation (ΔH_f°₂₉₈) were determined using isodesmic reaction analysis at the CBS‐QCI/APNO and the CBSQ levels. Entropies (S°₂₉₈) and heat capacities (C_p°(T)) were determined using geometric parameters and vibrational frequencies obtained at the HF/6‐311G(d,p) level of theory. Internal rotor contributions were included in the S and C_p(T) values. A hydrogen atom can add to the CH₂‐group of the ketene to form the acetyl radical, CH₃C·O (E_a = 2.49 in CBS‐QCI/APNO, units: kcal/mol). The acetyl radical can undergo β‐scission back to reactants, CH₂?C?O + H (E_a = 45.97), isomerize via hydrogen shift (E_a = 46.35) to form the slight higher energy, formyl methyl radical, C·H₂CHO, or decompose to CH₃ + CO (E_a = 17.33). The hydrogen atom also can add to the carbonyl group to form C·H₂CHO (E_a = 6.72). This formyl methyl radical can undergo β scission back to reactants, CH₂?C?O + H (E_a = 43.85), or isomerize via hydrogen shift (E_a = 40.00) to form the acetyl radical isomer, CH₃C·O, which can decompose to CH₃ + CO. Rate constants are estimated as function of pressure and temperature, using quantum Rice–Ramsperger–Kassel analysis for k(E) and the master equation for falloff. Important reaction products are CH₃ + CO via decomposition at both high and low temperatures. A transition state for direct abstraction of hydrogen atom on CH₂?C?O by H to form, ketenyl radical plus H₂ is identified with a barrier of 12.27, at the CBS‐QCI/APNO level. ΔH_f°₂₉₈ values are estimated for the following compounds at the CBS‐QCI/APNO level: CH₃C·O (?3.27), C·H₂CHO (3.08), CH₂?C?O (?11.89), HC·CO (41.98) (kcal/mol). © 2002 Wiley Periodicals, Inc. Int J Chem Kinet 35: 20–44, 2003     

Temperature-programmed desorption/pulse surface reaction (tpd/tpsr) studies of CH4, C2H6, C2H4, and CO over a cobalt/MWNTs catalyst

Summary Temperature-programmed desorption (TPD) of CH₄, C₂H₆, C₂H₄, and CO and temperature-programmed pulse surface reactions (TPSR) of CH₄, C₂H₆, C₂H₄, CO, and CO/H₂ over a Co/MWNTs catalyst have been investigated. The TPD results indicated that CH₄ and C₂H₆ mainly exist as physisorbed species on the Co/MWNTs catalyst surface, whilst C₂H₄ and CO exist as both physisorbed and chemisorbed species. The TPSR results indicated that CH₄ and C₂H₆ do not undergo reaction between room temperature and 450^oC. Pulsed C₂H₄ can be transformed into CH₄ at 400 ^oC whilst pulsed CO can be transformed into CO₂ at 100 or 150^oC. In gaseous mixtures of CO and H₂ containing excess CO, the products of pulsed reaction were CH₃CHO and CH₃OH. When the ratio of CO and H₂ was 1:2, pulsed CO and H₂ were transformed into CH₃CHO, CH₃OH and CH₄. In H₂ gas flow, pulsed CO was transformed into a mixture of CH₃CHO and CH₄ between 200 and 250^oC and was transformed into CH₄ only above 250^oC.     

A Theoretical Investigation of the Decomposition Reactions of Ethyl Formate in the S0 State

This study revisits the stability of the possible conformations and the decomposition reactions of ethyl formate in the S₀ state using the (U)MP2, MP4SDTQ, CCSD(T), and (U)B3LYP methods with various basis sets. The transition states of the decomposition channels to HCOOH + C₂H₄, CO + CH₃CH₂OH, CH₂O + CH₃CHO, HCOH + CH₃CHO, C₂H₆ + CO₂, and H₂ + CH₂CHOCHO are determined. The microcanonical rate constants derived from the RRKM theory are calculated for each of the decomposition reactions. The high‐pressure limit rate constants are calculated for the decomposition channels to HCOOH + C₂H₄, CO + CH₃CH₂OH, and CH₂O + CH₃CHO.     

Probing the pyrolysis of ethyl formate in the dilute gas phase by synchrotron radiation and theory

The thermal decomposition of the atmospheric constituent ethyl formate was studied by coupling flash pyrolysis with imaging photoelectron photoion coincidence (iPEPICO) spectroscopy using synchrotron vacuum ultraviolet (VUV) radiation at the Swiss Light Source (SLS). iPEPICO allows photoion mass-selected threshold photoelectron spectra (ms-TPES) to be obtained for pyrolysis products. By threshold photoionization and ion imaging, parent ions of neutral pyrolysis products and dissociative photoionization products could be distinguished, and multiple spectral carriers could be identified in several ms-TPES. The TPES and mass-selected TPES for ethyl formate are reported for the first time and appear to correspond to ionization of the lowest energy conformer having a cis (eclipsed) configuration of the O = C (H)– O – C (H₂)–CH₃ and trans (staggered) configuration of the O= C (H)– O – C (H₂)– C H₃ dihedral angles. We observed the following ethyl formate pyrolysis products: CH₃CH₂OH, CH₃CHO, C₂H₆, C₂H₄, HC(O)OH, CH₂O, CO₂, and CO, with HC(O)OH and C₂H₄ pyrolyzing further, forming CO + H₂O and C₂H₂ + H₂. The reaction paths and energetics leading to these products, together with the products of two homolytic bond cleavage reactions, CH₃CH₂O + CHO and CH₃CH₂ + HC(O)O, were studied computationally at the M06-2X-GD3/aug-cc-pVTZ and SVECV-f12 levels of theory, complemented by further theoretical methods for comparison. The calculated reaction pathways were used to derive Arrhenius parameters for each reaction. The reaction rate constants and branching ratios are discussed in terms of the residence time and newly suggest carbon monoxide as a competitive primary fragmentation product at high temperatures.     

Shock‐tube and modeling study of acetaldehyde pyrolysis and oxidation

Pyrolysis and oxidation of acetaldehyde were studied behind reflected shock waves in the temperature range 1000–1700 K at total pressures between 1.2 and 2.8 atm. The study was carried out using the following methods, (1) time‐resolved IR‐laser absorption at 3.39 μm for acetaldehyde decay and CH‐compound formation rates, (2) time‐resolved UV absorption at 200 nm for CH₂CO and C₂H₄ product formation rates, (3) time‐resolved UV absorption at 216 nm for CH₃ formation rates, (4) time‐resolved UV absorption at 306.7 nm for OH radical formation rate, (5) time‐resolved IR emission at 4.24 μm for the CO₂ formation rate, (6) time‐resolved IR emission at 4.68 μm for the CO and CH₂CO formation rate, and (7) a single‐pulse technique for product yields. From a computer‐simulation study, a 178‐reaction mechanism that could satisfactorily model all of our data was constructed using new reactions, CH₃CHO (+M) → CH₄ + CO (+M), CH₃CHO (+M) → CH₂CO + H₂(+M), H + CH₃CHO → CH₂CHO + H₂, CH₃ + CH₃CHO → CH₂CHO + CH₄, O₂ + CH₃CHO → CH₂CHO + HO₂, O + CH₃CHO → CH₂CHO + OH, OH + CH₃CHO → CH₂CHO + H₂O, HO₂ + CH₃CHO → CH₂CHO + H₂O₂, having assumed or evaluated rate constants. The submechanisms of methane, ethylene, ethane, formaldehyde, and ketene were found to play an important role in acetaldehyde oxidation. © 2007 Wiley Periodicals, Inc. 40: 73–102, 2008     

Steric Influence on Reactions of Benzyl Potassium Species with CO

Reactions of benzyl potassium species with CO are shown to proceed via transient carbene-like intermediates that can undergo either dimerization or further CO propagation. In a sterically unhindered case, formal dimerization of the carbene is the dominant reaction pathway, as evidenced by the isolation of ((Ph₃SiO)(PhCH₂)C)₂ 2 and PhCH₂C(O)CH(OH)CH₂Ph 3 . Reactions with increasingly sterically encumbered reagents show competitive reaction pathways involving intermolecular dimerization leading to species analogous to 2 and 3 and those containing newly-formed five-membered rings tBu₂C₆H₂(C(OSiR₃)C(OSiR₃)CH₂) (R=Me 6 , Ph 7 ). Even further encumbered reagents proceed to either dimerize or react with additional CO to give a ketene-like intermediates, thus affording a 7-membered tropolone derivative 14 or the dione (3,5-tBu₂C₆H₃)₃C₆H₂CH₂C(O))₂ 15 .     

Isocyanide addition to MN2(CO)5(Ph2PCH2PPh2)2 and the formation of a four-electron doubly-bridging isocyanide

The reactions of Fe(CO)₅, Fe(CO)₄P(C₆H₅)₃, M(CO)₆ (M  W, Mo, Cr), and (CH₃C₅H₄Mn(CO)₃ with KH and several boron and aluminium hydrides were investigated. Iron pentacarbonyl was converted quantitatively to K⁺Fe(CO)₄-(CHO) by hydride transfer from KBH(OCH₃)₃ allowing isolation of [P(C₆H₅)₃]₂-Nⁿ⁺Fe(CO)₄(CHO)^? in 50% yield. Lower yields were obtained with LiBH(C₂H₅)₃, and other hydride sources gave little or no formyl product. The stability of Fe(CO)₄(CHO)^? in THP was found to depend on the cation, decreasing in the order [P(C₆H₅)₃]₂N⁺ > K⁺ > Na⁺ > Li⁺. No formyl complexes were isolated and no spectroscopic evidence for formyl formation was observed in the reactions of the other transition metal carbonyls with several hydride sources. Fe(CO)₄-P(C₆H₅)₃ gave K₂Fe(CO)₄ when treated with KHB(OCH₃)₃. When treated with LiBH(C₂H₅)₃, W(CO)₆ gave a mixture of HW₂(CO)₁₀^?and (OC)₅W(COC₂H₅)^?; the latter was methylated to give the carbene complex (OC)₅WC(OCH₃)C₂H₅.     

Reactions of methyl radicals with acetaldehyde and acetaldehyde-d1. II. BEBO calculations of the temperature dependence of the rate constants

The BEBO method was used to calculate the kinetic isotope effect for formyl-hydrogen abstraction from acetaldehyde by methyl radicals. The calculated isotope effect and experimental ratios of the rate constants obtained at 785°K for the reactions of CH₃ with CH₃CHO and CH₃CDO, together with the theoretical temperature dependence of the specific rates (as formulated by the BEBO theory), were used to obtain rate constants for the steps CH₃ + CH₃CHO → CH₄ + CH₃CO (2a), CH₃ + CH₃CHO → CH₄ + CH₂CHO (2b), and CH₃ + CH₃CDO → CH₃D + CH₃CO (1a) between 298 and 1224°K. It was shown that the curvature apparent in the Arrhenius plot of the rate coefficient k₂ reported for the reaction of methyl radicals with acetaldehyde in the temperature range of 298–1224°K is caused both by the simultaneous contribution of steps (2a) and (2b) to methane formation, and by the curvature in the Arrhenius plots of the two elementary rate constants themselves. The predicted curve agrees well with the experimental data, especially if the tunneling correction is applied.     

Metal formyl complexes. Hydride transfer to group VIII transition metal carbonyl clusters

The reaction of LiBH(C₂H₅)₃ with Os₃(CO)₁₂ or Ir₄(CO)₁₂ leads to the formation of spectroscopically detectable formyl complexes. In the latter case, the complex is smoothly converted to [Ir₄(CO)₁₁H]^?, an expected decompositioFn complex of the corresponding polynuclear formyl complex, [Ir₄(CO)₁₁CHO]^?.     

Rate constant and products for the reaction of Cl atom with n‐butyraldehyde

The photooxidations of n‐butyraldehyde initiated by Cl atom were carried out at room temperature (298 ± 2K) and 1 atm pressure. The rate coefficient for the reactions of Cl atom with n‐butyraldehyde was determined as k = (2.04 ± 0.36) × 10^?10 cm³ molecule^?1 s^?1 by using relative rate techniques. The photooxidation products of n‐butyraldehyde reaction with Cl atom were also studied by using both gas chromatography‐mass spectrometry (GC‐MS) and gas chromatography techniques. C₂H₅CHO, CH₃CHO, CO and CO₂ were the major products observed. In the absence of NO, the observed yields of C₂H₅CHO, CH₃CHO, and CO were 60%, 3%, and 9%, respectively. However, when NO was introduced into the reaction chamber and the initial ratios of [NO]₀/[n‐butyraldehyde]₀ were between 1 and 8, the yield of C₂H₅CHO decreased to 33%, whereas that of CH₃CHO and CO rose up to 21% and 25%, respectively. On the basis of mechanism data deduced in this study and the fraction molar yields, the approximate branching ratios for Cl atom attack at ? C(O)H, α‐, β‐, and γ‐positions in n‐butyraldehyde could be derived as ?42%, <25%, 21%, and ?12%, respectively. © 2007 Wiley Periodicals, Inc. 39: 168–174, 2007     

New deoxygenative transformations; reactions of (CO)4Fe[Si(CH3)3]2 with acyclic ethers

The reaction of cis-(CO)₄Fe[Si(CH₃)₃]₂ (I) with CH₃OSi(CH₃)₃ and C₆H₅CH₂-OSi(CH₃)₃ at 80°C affords good yields of [(CH₃)₃Si]₂O and the deoxygenation products RSi(CH₃)₃ (R = CH₃, C₆H₅CH₂). These reactions are proposed to occur via (CO)₄Fe(R)Si(CH₃)₃ intermediates. This is supported by the observed formation of cis-(CO)₄Fe(CH₃)Si(CH₃)₃ (II) during the more rapid reaction of I with (CH₃)₂O; subsequent (CH₃)₄Si elimination occurs. With (C₆H₅CH₂)₂O, I reacts at 80°C to yield C₆H₅CH₂Si(CH₃)₃ and C₆H₅CH₂OSi(CH₃)₃ as primary products. With C₆H₅CH₂OCH₃, I effects regioselective benzyl---oxygen bond cleavage.     

Partial oxidation and oxidative condensation of methane with the participation of N2O on a V2O5/SiO2 catalyst

The catalytic reaction of CH₄, with N₂O at 773–823 K on a V₂O₅/SiO₂ catalyst affords products of the partial oxidation (HCHO and CH₃OH), exhaustive oxidation (CO), and oxidative condensation (C₂H₅OH and CH₃CHO) of methane. A mechanism is proposed for the complex reaction, including the intermediate compounds V⁵⁺O and V⁴⁺CH₃OH as common intermediates for all the routes.Translated from Teoreticheskaya i Éksperimental'naya Khimiya, Vol. 23, No. 5, pp. 641–646, September–October, 1987.     

Reaction of CH3CHO with Y+: A density functional theoretical study

The reaction mechanism of the Y⁺ cation with CH₃CHO has been investigated with a DFT approach. All the stationary points are determined at the UB3LYP/ECP/6-311++G** level of the theory. Both ground and excited state potential energy surfaces are investigated in detail. The present results show that the title reaction start with the formation of a CH₃CHO-metal complex followed by C-C, aldehyde C-H, methyl C-H and C-O activation. These reactions can lead to four different products (Y⁺CH₄ + CO, Y⁺CO + CH₄, Y⁺COCH₂ + H₂ and Y⁺O + C₂H₄). The minimum energy reaction path is found to involve the spin inversion in the different reaction steps, this potential energy curve-crossing dramatically affects reaction exothermic. The present results may be helpful in understanding the mechanism of the title reaction and further experimental investigation of the reaction.     

Evaluated and estimated kinetic data for phase reactions of the hydroperoxyl radical

Methods are discussed for the production and detection of the hydroperoxyl radical for use in gas phase kinetic studies. Rate constants for gas phase reactions of the hydroperoxyl radical with itself, H₂, H₂O, CO, NO, SO₂, O₃, C₂H₆, C₃H₈, i-and n-C₄H₁₀, C₂H₄, i-C₄H₈, HCHO, C₂H₅CHO, n-C₃H₇CHO, Br, O, OH, and H are critically evaluated. Recommended or estimated rate constant expressions with associated error limits are given applicable over specified temperature ranges (normally 300–1000°K). The reactivity of HO₂ compared with OH, O, H, F, Cl, Br, CH₃, and CH₃O is presented in tabular form and the implications for atmospheric chemistry are discussed.     

Effect of Halide Anions on the Electroreduction of CO2 to C2H4: A Density Functional Theory Study**

The halide anions present in the electrolyte improve the Faradaic efficiencies (FEs) of the multi-hydrocarbon (C₂₊) products for the electrochemical reduction of CO₂ over copper (Cu) catalysts. However, the mechanism behind the increased yield of C₂₊ products with the addition of halide anions remains indistinct. In this study, we analysed the mechanism by investigating the electronic structures and computing the relative free energies of intermediates formed from CO₂ to C₂H₄ on the Cu (100) facet based on density functional theory (DFT) calculations. The results show that formyl *CHO from the hydrogenation reaction of the adsorbed *CO acts as the key intermediate, and the C−C coupling reaction occurs preferentially between *CHO and *CO with the formation of a *CHO-CO intermediate. We then propose a free-energy pathway of C₂H₄ formation. We find that the presence of halide anions significantly decreases the free energy of the *CHOCH intermediate, and enhances desorption of C₂H₄ in the order of I⁻>Cl⁻>Br⁻>F⁻. Lastly, the obtained results are rationalized through Bader charge analysis.     

Thermal stability of Peroxynitrates

Peroxynitrates are thermally unstable intermediates (at ambient temperatures) in the atmospheric degradation of hydrocarbons. In this work, thermal lifetimes of nine peroxynitrates have been measured as a function of temperature and, for two of them, also, as a function of total pressure. In the presence of excess NO, relative concentrations of the peroxynitrates were followed in a 420 I reaction chamber as a function of time by means of longpath IR absorption using a Fourier transform spectrometer. Original data on the unimolecular decomposition rate constants are presented for the peroxynitrates RO₂NO₂ with R = C₆H₁₁, CH₃C(O)CH₂, C₆H₅CH₂, CH₂I, CH₃C(O)OC(H)CH₃, C₆H₅OCH₂, (CH₃)₂NC(O), C₆H₅OC(O), and C₂H₅C(O). Thermal lifetimes at room temperature and atmospheric pressure are very short (in the order of seconds) for substituted methyl peroxynitrates (i.e., R'CH₂O₂NO₂) but rather long for substituted formyl peroxynitrates (i.e., R″C(O)O₂NO₂). Kinetic data from this and previous work from our laboratory are used to derive structure‐stability relationships which allow an estimate of the thermal lifetimes of peroxynitrates from readily available ¹³C n.m.r. shift data. ©1999 John Wiley & Sons, Inc. Int J Chem Kinet 31: 127–144, 1999     

Direct Identification of Acetaldehyde Formation and Characterization of the Active Site in the [VPO4].+/C2H4 Couple by Gas‐Phase Vibrational Spectroscopy

The gas‐phase reaction of the heteronuclear oxide cluster [VPO₄]^.+ with C₂H₄ is studied under multiple collision conditions at 150 K using cryogenic ion‐trap vibrational spectroscopy combined with electronic structure calculations. The exclusive formation of acetaldehyde is directly identified spectroscopically and discussed in the context of the underlying reaction mechanism. In line with computational predictions it is the terminal P=O and not the V=O unit that provides the oxygen atom in the barrier‐free thermal C₂H₄→CH₃CHO conversion. Interestingly, in the course of the reaction, the emerging CH₃CHO product undergoes a rather complex intramolecular migration, coordinating eventually to the vanadium center prior to its liberation. Moreover, the spectroscopic structural characterization of neutral C₂H₄O deserves special mentioning as in most, if not all, ion/molecule reactions, the neutral product is usually only indirectly identified.     

Thermal dehydration kinetics of disaccharides

The vacuum decomposition of sucrose and cellobiose has been observed in the 150–250°C temperature range. The predominant decomposition product of both sugars is H₂O with less than 5% CO, CO₂, CH₂O, CH₃CHO, CH₃OH, and C₂H₅OH formed. The detailed rates and temperature dependences suggest that with the possible exception of C₂H₅OH, the minor products are formed in secondary reactions of the dehydration products. Further it is shown that the so-called “melting with decomposition” of a sugar is in reality a high-temperature dissolution of the disaccharide in the eliminated water.