Semi-quantitative trace analysis of nuclear fast red by surface enhanced resonance Raman scattering

The dye nuclear fast red has been detected and determined semi-quantitatively by means of surface enhanced resonance Raman scattering (SERRS) and surface enhanced Raman scattering (SERS), using laser exciting wavelengths of 514.5 and 632.8 nm, respectively, by employing a citrate-reduced silver colloid. A good linear correlation is observed for the dependence of the intensities of the SERRS bands at 989 cm⁻¹ (R=0.9897) and 1278 cm⁻¹ (R=0.9872) on dye concentration over the range 10⁻⁹ to 10⁻⁷ M, when using an exciting wavelength of 514.5 nm. At dye concentrations above 10⁻⁷ M, the concentration dependence of the SERRS signals is non-linear. This is almost certainly due to the coverage of the colloidal silver particles being in excess of a full monolayer of the dye. A linear correlation is also observed for the dependence of the intensities of the SERS bands at 989 cm⁻¹ (R=0.9739) and 1278 cm⁻¹ (R=0.9838) on the dye concentration over the range 10⁻⁸ to 10⁻⁶ M when using an exciting wavelength of 632.8 nm. Strong fluorescence prevented collection of resonance Raman scattering (RRS) spectra from powdered samples or aqueous solutions of the dye using an exciting wavelength of 514.5 nm, but weak bands were observed in the spectra obtained from both powdered and aqueous samples of the dye using an exciting wavelength of 632.8 nm. A study of the pH dependence of SERRS/SERS and UV–VIS absorption spectra revealed the presence of different ionisation states of the dye. The limits of detection for nuclear fast red by SERRS (514.5 nm), SERS (632.8 nm) and visible spectroscopy (535 nm) are 9, 89 and 1000 ng ml⁻¹, respectively.     

Surface-enhanced Raman scattering and surface-enhanced resonance Raman scattering excitation profiles of Ag-2,2'-bipyridine surface complexes and of [Ru(bpy)3]2+ on Ag colloidal surfaces: manifestations of the charge-transfer resonance contributions to the overall surface enhancement of Raman scattering

Excitation profiles of SERS (surface-enhanced Raman scattering) and/or SERRS (surface-enhanced resonance Raman scattering) spectral bands of two forms of a Ag-bpy (bpy = 2,2'-bipyridine) surface complex and of [Ru(bpy)3]2+ on Ag nanoparticle (hydrosol) surfaces were determined from the spectra excited in the 458-600 nm region and are reported together with the FT-SERS spectra of the Ag-bpy surface complex and FT Raman spectra of [Ru(bpy)3] Cl2. Seven of the observed 11 fundamentals as well as their first overtones and combination bands are selectively enhanced in SERS of the Ag-bpy surface complex formed in the Ag colloid/HCl/bpy system. The profiles of these bands show a common maximum at approximately 540 nm. The selectively enhanced bands of the Ag-bpy surface complex have nearly the same wavenumbers as those enhanced in the SERRS and resonance Raman spectra of [Ru(bpy)3]2+ upon excitation close to the 453 nm maximum of its MLCT absorption band. Moreover, the intensity patterns of the bpy vibrations of the two species match both in resonance (541 nm excitation for Ag-bpy, 458 nm for [Ru(bpy)3]2+) and in off-resonance (458 and 1064 nm for Ag-bpy, 1064 nm for [Ru(bpy)3]2+). The distinct band shapes of the excitation profiles of the selectively enhanced vibrational modes of the Ag-bpy surface complex, as well as the observation of overtones and combination bands in the SERS spectra upon excitation into this "band", are interpreted in terms of a charge-transfer resonance contribution to the overall SERS enhancement. In view of the near-coincidence of the vibrational modes coupled to the resonant electronic transition of Ag-bpy with those coupled to the MLCT transition of [Ru(bpy)3]2+, the resonant electronic transition is tentatively assigned to a Ag metal to bpy (pi*) CT transition.     

DNA detection by surface enhanced resonance Raman scattering (SERRS)

This Education article outlines the different ways in which surface enhanced resonance Raman scattering (SERRS) can be used for the detection of DNA. The use of various different SERRS detection strategies that have allowed both sensitive and selective detection to be obtained is covered. Detection of DNA by SERRS involves the use of a dye with the DNA, whether as an intercalator or by direct covalent attachment. This generates strong SERRS signals that indicate the presence of the specific DNA sequence. The SERRS detection of DNA in different molecular biological assays is also discussed.     

Quantitative detection of dye labelled DNA using surface enhanced resonance Raman scattering (SERRS) from silver nanoparticles

The detection of dye labelled DNA by surface enhanced resonance Raman scattering (SERRS) is reported. The dye labels used are commercially available and have not previously been used as SERRS dyes. Detection limits using two excitation frequencies were determined for each label. This expands the range of labels which can be used for surface enhanced resonance Raman scattering with silver nanoparticles.     

Metal-molecule Schottky junction effects in surface enhanced Raman scattering

We propose a complementary interpretation of the mechanism responsible for the strong enhancement observed in surface enhanced raman scattering (SERS). The effect of a strong static local electric field due to the Schottky barrier at the metal-molecule junction on SERS is systematically investigated. The study provides a viable explanation to the low repeatability of SERS experiments as well as the Raman peak shifts as observed in SERS and raw Raman spectra. It was found that a strong electrostatic built-in field at the metal-molecule junction along specific orientations can result in 2-4 more orders of enhancement in SERS.     

Surface enhanced resonance Raman scattering detection by fluorimeter

A commercially available fluorimeter with a white light source is used to detect surface enhanced resonance Raman scattering (SERRS). This approach allows facile tunability of the excitation source for SERRS.     

Direct detection of DNA using 3D surface enhanced Raman scattering hotspot matrix

Silver nanoparticles (AgNPs) are evaporatively self‐assembled into the 3D surface enhanced Raman scattering (SERS) hotspot matrix with the assistant of glycerol to improve the spectral reproducibility in direct DNA detection. AgNPs and DNA in the glycerol‐stabilized 3D SERS hotspot matrix are found to form flexible sandwich structures through electrostatic interaction where neighboring AgNPs create uniform and homogeneous localized surface plasmon resonance coupling environments for central DNA. Nearly two orders of magnitude extra SERS enhancement, more stable peak frequency and narrower peak full width at half maximum can therefore be obtained in DNA SERS spectra, which ensures highly stable and reproducible SERS signals in direct detection of both single strand DNA and double strand DNA utilizing the 3D SERS hotspot matrix. By normalizing the SERS spectra using phosphate backbone as internal standard, identification of single base variation in oligonucleotides, determination of DNA hybridization events and recognition of chemical modification on bases (hexanethiol‐capped at 5’ end) have been demonstrated experimentally. This proposed 3D SERS hotspot matrix opens a novel perspective in manipulating plasmonic nanoparticles to construct SERS platforms and would make the surface enhanced Raman spectroscopy a more practical and reliable tool in direct DNA detection.     

Surface enhanced resonance Raman scattering of the perylene chromophore

Vibrational fundamentals, overtones and combination bands of the perylene chromophore, in the N-hexyl-3, 4:9,10-perylenetetracarboxylic diimide (HPTCNH) and other perylene tetracarboxylic derivatives, have been observed using surface enhanced resonance Raman scattering (SERRS) of Langmuir—Blodgett (LB) monolayers on Ag island films. Typical vibrational progressions due to the Franck—Condon (A-term) were seen. The results showed that the mechanism of the RRS effect was not altered by the metal surface, although the RRS signal was enhanced by four orders of magnitude. Polarization properties of the SERRS signal were studied for LB monolayers on a series of SERS active substrates. A frequency dependence of the depolarization ratios was observed.     

Applications of surface enhanced Raman scattering to the study of metal-adsorbate interactions

Surface enhanced Raman scattering (SERS) is a powerful technique for characterizing adsorbed species and processes at metallic surfaces. The giant signal enhancement (10⁴–10⁶ larger than normal Raman scattering) makes this technique sensitive to even sub-monolayer amounts of adsorbate on a surface. Consequently, the application of SERS to the in situ study of electrochemical processes provides useful mechanistic and structural information. In this review, advantages and limitations of electrochemical SERS techniques are presented along with experimental information about the nature of the metal-adsorbate interactions occurring in various aqueous and non-aqueous systems. Special emphasis is given to experimental results; however, the salient features of the enhancement theories are highlighted. Adsorbate orientation and SERS surface selection rules are discussed.     

Single molecule level detection of allophycocyanin by surface enhanced resonance Raman scattering

Single molecule level detection of the near-infrared fluorescent protein allophycocyanin (APC) has been achieved using surface enhanced resonance Raman scattering (SERRS). The detection limit using the peak height of the 440 cm(-1) band was 1 x 10(-13) mol l(-1), compared to 2 x 10(-12) mol l(-1) for the fluorescence peak at 660 nm.     

Quantitative evaluation of blinking in surface enhanced resonance Raman scattering and fluorescence by electromagnetic mechanism

We analyze blinking in surface enhanced resonance Raman scattering (SERRS) and surface enhanced fluorescence (SEF) of rhodamine 6G molecules as intensity and spectral instability by electromagnetic (EM) mechanism. We find that irradiation of intense NIR laser pulses induces blinking in SERRS and SEF. Thanks to the finding, we systematically analyze SERRS and SEF from stable to unstable using single Ag nanoparticle (NP) dimers. The analysis reveals two physical insights into blinking as follows. (1) The intensity instability is inversely proportional to the enhancement factors of decay rate of molecules. The estimation using the proportionality suggests that separation of the molecules from Ag NP surfaces is several angstroms. (2) The spectral instability is induced by blueshifts in EM enhancement factors, which have spectral shapes similar to the plasmon resonance. This analysis provides us with a quantitative picture for intensity and spectral instability in SERRS and SEF within the framework of EM mechanism.     

Inherent complexities of trace detection by surface-enhanced Raman scattering.

Surface-enhanced Raman scattering (SERS) and surface-enhanced resonance Raman scattering (SERRS) are powerful optical scattering techniques used in such frontier areas of research as ultrasensitive chemical analysis, the characterization of nanostructures, and the detection of single molecules. However, measuring and, most importantly, interpreting SERS/SERRS spectra can be incredibly challenging. This is the result of modifications to the measured spectra that are due to of a variety of instabilities and contributions. These interferences and modifications arise from the nature of the enhancement itself, as well as the conditions used to attain SERS spectra. The present report is an attempt to collect in one place the analytical interferences that are most commonly found during the collection of SERS/SERRS spectra.     

Semi-quantitative analysis of indigo by surface enhanced resonance Raman spectroscopy (SERRS) using silver colloids

In this paper we report for the first time semi-quantitative analysis of indigo using surface enhanced Raman spectroscopy (SERS) and surface enhance resonance Raman spectroscopy (SERRS). Indigo, a dye widely used today in the textile industry, has been used, historically, both as a dye and as a pigment; the latter in both paintings and in printed material. The molecule is uncharged and largely insoluble in most solvents. The application of SERS/SERRS to the semi-quantitative analysis of indigo has been examined using aggregated citrate-reduced silver colloids with appropriate modifications to experimental protocols to both obtain and maximise SERRS signal intensities. Good linear correlations are observed for the dependence of the intensities of the SERRS band at 1151 cm(-1) using laser exciting wavelengths of 514.5 nm (R=0.9985) and 632.8 nm (R=0.9963) on the indigo concentration over the range 10(-7)-10(-5) and 10(-8)-10(-5) mol dm(-3), respectively. Band intensities were normalised against an internal standard (silver sol band at 243 cm(-1)). Resonance Raman spectra (RRS) of aqueous solutions of indigo could not be collected because of its low solubility and the presence of strong fluorescence. It was, however, possible to obtain RS and RRS spectra of the solid at each laser excitation wavelength. The limits of detection (L.O.D.) of indigo by SERS and SERRS using 514.5 and 632.8 nm were 9 ppm at both exciting wavelengths. Signal enhancement by SERS and SERRS was highly pH dependent due to the formation of singly protonated and possibly doubly protonated forms of the molecule at acidic pH. The SERS and SERRS data provide evidence to suggest that an excess of monolayer coverage of the dye at the surface of silver colloids is observed at concentrations greater than 7.85x10(-6) mol dm(-3) for each exciting wavelength. The data reported herein also strongly suggest the presence of multiple species of the indigo molecule.     

Single-molecule surface enhanced resonance Raman spectroscopy of the enhanced green fluorescent protein

In the present contribution, we demonstrated that surface-enhanced resonance Raman scattering spectra from single green fluorescent proteins (GFPs) were obtained. The most important findings are the direct detection of the conversion between a deprotonated and a protonated form of the chromophore at the single-molecule level via the corresponding vibrational fingerprints, and the fact that the enhanced green fluorescent protein (EGFP) also shows a high surface enhanced resonance Raman scattering (SERRS) signal. Our findings show the potential of the technique to study structural dynamics of protein molecules at a single-molecule level.     

FT-Raman, FT-IR and surface enhanced Raman scattering spectra of sodium salicylate

FT-IR and FT-Raman spectra of sodium salicylate were recorded and analysed. Surface enhanced Raman scattering (SERS) spectrum was recorded is silver colloid. Comparisons of the SERS spectrum with the spectra in solution and of the solid sample are made. Sodium salicylate (an O donor ligand) is thought to adsorb in a somewhat 'tilted side on orientation' with respect to the silver surface.     

Vibrational pumping in surface enhanced Raman scattering (SERS)

In this tutorial review, the underlying principles of vibrational pumping in surface enhanced Raman scattering (SERS) are summarized and explained within the framework of their historical development. Some state-of-the-art results in the field are also presented, with the aim of giving an overview on what has been established at this stage, as well as hinting at areas where future developments might take place.     

Surface-enhanced Raman scattering of EDOT and PEDOT on silver and gold nanoparticles

Surface-enhanced Raman scattering (SERS) spectra of the conducting polymer poly(3,4-ethylenedioxythiophene) (PEDOT) and its monomer 3,4-ethylenedioxythiophene (EDOT) on Ag and Au nanoparticles presenting different morphologies and stabilizing agents have been obtained using the excitation radiation at 633 nm. The SERS spectra of the monomer and polymer are strongly dependent both on the metal and capping agent of the substrate. SERS spectra of EDOT on Au nanospheres indicates that adsorption occurs with the thiophene ring perpendicular to the metal surface. In contrast, polymerization takes place on the silver surface of Ag nanospheres. EDOT adsorption on Ag nanoprisms with polyvinylpyrrolidone (PVP) as capping agent occurs similarly to that observed on gold. Surface-enhanced resonance Raman scattering (SERRS) spectra of PEDOT on gold nanostars that present a thick layer of PVP show no chemical interaction of PEDOT with the metal surface; however, when PEDOT is adsorbed on citrate stabilized gold nanospheres, the SERRS spectra suggest that thiophene rings are perpendicular to the surface. Oxidation of PEDOT also is observed on Ag nanospheres. The investigation of the interface between PEDOT and metal surface is crucial for the development in polymer-based optoelectronic devices since this interface plays a crucial role in their stability and performance.     

A new substrate for surface enhanced Raman scattering of dye Sudan molecules

A new SERS substrate was prepared using electro-polishing aluminum foils. Based on these high active SERS systems, surface enhanced Raman scattering (SERS) of Azo Dye Sudan were performed and carefully studied based on this highly active SERS substrate. High quality SERS spectra were obtained, which indicates that this kind of coarse aluminum foils is an active SERS substrate. Numbers of additional modes were presented, as well as some split peaks, which may be a consequence of symmetry lowering.     

Resonance Raman optical activity and surface enhanced resonance Raman optical activity analysis of cytochrome c

High-resolution resonance Raman (RR) and resonance Raman optical activity (ROA) spectra of cytochrome c were obtained in order to perform full assignment of spectral features of the resonance ROA spectrum. The resonance ROA spectrum of cytochrome c revealed a distinct spectral signature pattern due to resonance enhanced skeletal porphyrin vibrations, more pronounced than any contribution from the protein backbone. Combining the intrinsic resonance properties of cytochrome c with the surface plasmon enhancement achieved with colloidal silver particles, the surface enhanced resonance Raman scattering (SERRS) and surface enhanced resonance ROA (SERROA) spectra of the protein were successfully obtained at concentrations as low as 1 microM. The assignments of spectral features were based on the information obtained from the RR and resonance ROA spectra. Excellent agreement between RR and SERRS spectra is reported, while some disparities were observed between the resonance ROA and SERROA spectra. These differences can be ascribed to perturbations of the physical properties of the protein upon adhesion to the surface of the silver colloids.     

Protein-nanoparticle labelling probed by surface enhanced resonance Raman spectroscopy

A benzotriazole dye has been attached to a heme protein via a Michael addition and the unique potential of surface enhanced resonance Raman scattering (SERRS) to provide informative in situ recognition of more than one label on one protein demonstrated.