Photoluminescent behavior of poly(3‐hexylthiophene) derivatives with a high azobenzene content in the side chains

A series of polythiophene derivatives with substantially higher azobenzene contents in the side chains were prepared via copolymerization of 3‐hexylthiophene with four different types of 4‐((4‐(phenyl)azo)phenoxy)alkyl‐3‐thienylacetate. The alkyl spacers with different lengths, i.e. butyl, hexyl, octyl and undecyl groups were used between the azobenzene group and the thiophene ring. The compositions, structures and thermal properties of these polythiophene derivatives were characterized. The structural dependence of photoluminescent emission, photochromic behavior of these copolymers were systematically studied and compared with poly(3‐hexylthiophene). The results show that the azobenzene substitution renders the polythiophene some interesting optical properties that can be modulated by UV light irradiation. In the azobenzene modified polythiophene, the intensity of photoluminescent emission associated with the conjugated polythiophene main chain was found to decrease significantly upon UV irradiation. The finding suggests that the photo‐induced trans‐cis isomerization of the azobenzene pendant groups has a significant effect on photoluminescent emission, particularly when short spacers are used between azobenzene groups and the main chain. However, the effect becomes less prominent when longer spacers are used between the azobenzene group and the main chain. Furthermore, UV irradiation of the copolymers also resulted in an increase in intensity and broadening of bandwidth for the absorption peak associated with the polythiophene backbones. Again the magnitude of intensity changes upon UV irradiation were found to be dependent on the spacer length between the azobenzene group and polythiophene main chain. Copyright © 2005 John Wiley & Sons, Ltd.     

Photochemical control of photoluminescence property of photoactive polythiophenes

Azobenzene‐functionalized polythiophene derivatives, Poly[4‐((4‐(phenyl)azo)phenoxy)alkyl‐3‐thienylacetate] (alkyl=hexyl and octyl) (P6 and P8) and the copolymers of 3‐hexylthiophene and 4‐((4‐(phenyl)azo)phenoxy)alkyl‐3‐thienylacetate (alkyl=hexyl and octyl) (P66 and P86) were synthesized. The composition, structure, and thermal property of these polythiophene derivatives were fully characterized by NMR, FTIR, GPC, MDSC, and XRD. The structural dependence of the photochromic features and thermochromic behaviors were also investigated by means of photoluminescence and UV‐Vis absorption spectroscopy. The results have shown that the azobenzene substitution renders the homopolymer (P6 and P8) some interesting optical properties that can be modulated by UV light irradiation. In these azobenzene‐modified polythiophenes, the intensity of photoluminescent emission associated with the conjugated polythiophene main chain was found to decrease significantly upon UV irradiation. The finding suggests that the photo‐induced trans–cis isomerization of the azobenzene pendant groups has significant effect on photoluminescent emission. However, the effect becomes less prominent for copolymer P66 and P86 due to the lower content of azobenzene chromophore in the side chain of the copolymers. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 1421–1432, 2005     

Unusual photo-induced behaviour in a side chain liquid crystalline azo-polyester

An unusual behaviour has been observed in the photo-induced response of an azobenzene side chain liquid crystalline polyester (P6d4). Room temperature irradiation with linearly polarised 488 nm light does not induce any birefringence (Δn) in films of this polymer that have been quenched from the isotropic state. However, using the same irradiation conditions Δn is induced in quenched films that have been kept in darkness for a few minutes. Besides, no photo-induced Δn is observed in films irradiated with 488 nm light that have been previously irradiated with UV light. In this case, Δn can be recorded if the UV irradiated films have been kept in darkness for several hours. In another set of experiments performed with the P6d4 polymer, irradiation with high intensity linearly polarised 488 nm light induces an initial increase of Δn and then it goes back to zero. Subsequent irradiation with linearly polarised 633 nm light induces an orientation of the azobenzene chromophores perpendicular to the polarisation of the 488 nm light and independent of the 633 nm light polarisation direction. These results are very different from those obtained in other side chain polyesters which only differ from P6d4 in the end substituent. The anomalous behaviour of P6d4 is discussed in terms of a supercooling effect of the isotropic phase, the trans to cis back isomerization, the trans aggregation kinetics and a memory effect associated with the main chain orientation.     

Structural and morphological changes during UV irradiation of the trans-planar form of syndiotactic polypropylene

Syndiotactic polypropylene films, obtained in the trans-planar mesophase, were exposed to accelerated weathering in a UV device at 45 °C for increasing times. A different series of films, characterized by the same structural organization, was annealed at 45 °C for the same times, to discern the thermal effects from those due to UV irradiation. The influence of UV irradiation and thermal treatments on the structural changes in terms of phase composition, crystallite sizes, and chain conformations was studied. Diffractometric and thermal analyses show that UV radiation causes a strong increase of helical crystallinity (189% with respect to the initial value), leaving the trans-planar mesophase unchanged. The mesophase domains have a higher rigidity and hinder the oxygen diffusion slowing down the photooxidative degradation.The chain scission in the amorphous phase produces a higher mobility, allowing crystallization. The crystallinity also increases in the thermally treated samples, but the increase is limited to the first 48 h and reaches about 89% of the initial value. Both in the thermally treated and UV irradiated samples the crystallite coherence length perpendicular to the 200 planes increases with time. The amorphous chains do crystallize at the beginning near the already formed crystals, thus increasing their dimensions. The carbonyl index shows an induction period of 48 h, before a rapid increase which apparently is inversely proportional to the percentage of mesomorphic and crystalline phases of the irradiated samples, indicating that the photooxidative reactions took place mainly in the amorphous region. A comparison with data already published on the photooxidative behavior of samples crystallized in form I shows that the presence of compact domains in trans-planar mesophase led to an increase in the induction period and to a greater stability of the material in the first 150 h of UV treatment.     

Photodegradation kinetics of poly(para-substituted styrene) in solution

The UV irradiation effects on stability of polystyrene, poly(4-methoxystyrene), poly(4-methylstyrene), poly(α-methylstyrene), poly(4-tert-butylstyrene), poly(4-chlorostyrene), and poly(4-bromostyrene) in dichloromethane, dichloromethane, tetrahydrofuran, and N,N-dimethylformamide solutions were studied in the presence of oxygen at different intervals of irradiation time. The photodegradation was studied at 293 K using fluorescence spectroscopy. Solutions of these polymers were accompanied by quenching of monomer and excimer emissions during the exposure of their solutions to UV light, and by a change in the structure of the fluorescence spectrum. Irradiation of poly(4-methylstyrene) and poly(α-methylstyrene) at excitation wavelength of 265 nm showed an increase of fluorescence intensity of a broad band, at longer wavelength without clear maxima. This may indicate that photodestruction of these polymers by irradiation with light of frequency absorbed by the polymer, may start from a random chain scission, with the possibility of formation of polyene and carbonyl compounds.     

Photoinduced chirality in achiral liquid crystalline azobenzene polymers containing different polar side groups

Circular dichroism (CD) was induced in the films of two achiral liquid crystalline polymers, poly[(4′-(6-(methacryloyloxy)hexyl)oxy)-(4-X)azobenzene] (PM6X, X = C and N for cyano and nitro, respectively), by irradiation with one handed circularly polarized light (CPL) at 442 nm. The CD and UV spectra of the polymeric films suggest that left-CPL induces a left helical structure and right-CPL reverses the resulting structure into a right helix. For PM6C, the photoinduced CD values of the nematic film are much higher than in the casting and isotropic film. The photoinduced chirality of PM6C films is higher than PM6N due to a higher polarity of nitro groups in PM6N. The PM6N’s CD intensity around 450 nm is increased with the irradiation time of linearly polarized light (LPL) followed by left-CPL irradiation. The correlation between azobenzene chromophores and circularly polarized light will be discussed in the paper.     

Light-driven fluorescence enhancement of phenylazo indazole-terminated polystyrene

The well-defined phenylazo indazole-terminated polystyrene (PS) was successfully prepared via reversible addition-fragmentation chain transfer (RAFT) polymerization of styrene (St) mediated by a novel chain transfer agent (CTA) bearing phenylazo indazole moieties in the Z group, benzyl-5-(4-(dimethylamino)phenylazo) indazole-1-carbodithioate (BPCD). The fluorescence emission of BPCD and the phenylazo indazole-terminated PS in chloroform (CHCl₃) before and after the 365 nm ultraviolet irradiation was investigated. Interestingly, the fluorescence intensities of BPCD and the phenylazo indazole-terminated PS in CHCl₃ were both sensitive to the 365 nm ultraviolet irradiation. The fluorescence intensities of these solutions increased with the irradiation time and reached maximum at 110 min. The light-driven fluorescence enhancement of BPCD and the phenylazo indazole-terminated PS were both attributed to the formation of spherical aggregate originated from the trans-cis isomerization of azobenzene moieties in BPCD and PS chain, which was confirmed by transmission electron microscopy (TEM), ¹H NMR, UV and dynamic light scattering (DLS) spectra.     

Growth and characterization of molybdenum oxide thin films prepared by photochemical metal–organic deposition (PMOD)

Molybdenum oxide thin films have been successfully prepared by direct UV irradiation of amorphous films of a molybdenum dioxide acetylacetonate complex on Si(1 0 0) substrates. Photodeposited films were characterized by X-ray photoelectron spectroscopy (XPS) and X-ray diffraction (XRD) and the surface morphology examined by Atomic Force Microscopy (AFM). It was found that as-photodeposited films are uniform and smooth, with thickness of 350 nm, with rms surface roughness of 28 nm and contain non-stoichiometric oxides (MoO_3−x). The results of XRD analysis showed that post-annealing of the films in air at 450 °C transforms the sub-oxides to α-MoO₃ phase with a much rougher surface morphology (rms = 144 nm). The as-photodeposited MoO_3−x films are amorphous, and exhibit better optical quality than annealed films.     

The influence of UV irradiation on the properties of chitosan films containing keratin

The mechanical, thermal and surface properties of chitosan and chitosan containing keratin hydrolysates have been studied and the influence of UV irradiation on these properties has been compared. The surface properties of chitosan films containing 5%, 15% and 30% of keratin hydrolysate before and after UV irradiation (λ = 254 nm) were investigated by means of contact angle measurements allowing the calculation of surface free energy. The chemical and structural changes during UV irradiation were studied by UV-vis and FTIR-ATR spectroscopy.The changes in mechanical properties such as breaking strength, percentage elongation and Young’s modulus have been investigated. The results have shown that the mechanical properties of the chitosan/keratin films were greatly affected by UV irradiation, but the level of the changes of these properties was smaller in the blend than in pure chitosan and strongly dependent on the time of irradiation and composition of the samples. The contact angle and the surface free energy were altered by UV irradiation, which indicates photooxidation and an increase of polarity of specimens. The range of these changes point to greater susceptibility of chitosan to photooxidation in the presence of keratin.     

Highly sensitive method for determination of N-nitrosamines using high-performance liquid chromatography with online UV irradiation and luminol chemiluminescence detection

A new method for the measurement of N-nitrosamines in part-per-trillion concentrations from water samples without preconcentration steps has been developed. This method is based on online UV irradiation after high-performance liquid chromatographic separation and subsequent luminol chemiluminescence detection without addition of an oxidant. It was confirmed that N-nitrosamines in basic aqueous solution were transformed to peroxynitrite by UV irradiation. The detection limits for this method were 1.5 ng/L, 2.9 ng/L, 3.0 ng/L, and 2.7 ng/L for N-nitrosodimethylamine, N-nitrosomorpholine, N-nitrosomethylethylamine, and N-nitrosopyrrolidine, respectively, at a signal-to-noise ratio of 3. The calibration graphs were linear in the range of 5–1000 ng/L for these N-nitrosamines. This method was used for the determination of N-nitrosamines in tap water, river water, and industrial plant effluent samples. The recoveries of N-nitrosodimethylamine, N-nitrosomorpholine, N-nitrosomethylethylamine, and N-nitrosopyrrolidine present in tap water sample at a concentration of 10 ng/L (mean ± standard deviation, n = 4) were (94.8 ± 2.7)%, (102.0 ± 6.9)%, (99.3 ± 3.9)%, and (102.8 ± 2.5)%, respectively. These results indicate that our proposed method can be applied satisfactorily to the determination of N-nitrosamines in water samples.     

Photodegradation of biodegradable polyesters: A comprehensive study on poly(l-lactide) and poly(?-caprolactone)

The photodegradation of melt-crystallized and amorphous-made poly(l-lactide) (PLLA-C and PLLA-A, respectively) and cast-crystallized poly(?-caprolactone) (PCL) was investigated comprehensively for the periods up to 200 h using gel permeation chromatography, differential scanning calorimetry, tensile testing, and polarization optical microscopy. The photodegradation of PLLA and PCL films proceeds via a bulk erosion mechanism, indicating that UV penetrates the specimens with no significant reduction in its intensity, irrespective of the chemical structure and the crystallinity of biodegradable polyesters. The photodegradability of PCL chains was higher than that of PLLA chains. This strongly suggests that the chemical structure of the two sequential groups adjacent to the ester oxygen rather than the density of ester group is crucial to determine the photodegradability of biodegradable polyesters. Although PLLA chains are photodegradable even in the crystalline regions, their photodegradability is lower than that in the amorphous regions. The significant increase in weight-average molecular weight (M_w)/number-average molecular weight (M_n) was observed for PLLA-A and PCL films, even when the decrease in M_n by UV irradiation was small. Most of the tensile properties of PLLA and PCL films remained unchanged during UV irradiation, while solely the elongation at break of PCL film significantly decreased. This result reflects that among the tensile properties the elongation at break was most sensitive to the change in molecular characteristics of biodegradable polyesters by UV irradiation. The contrast between bright and dark parts of Maltese crosses remained unchanged for the spherulites in PLLA-C and PCL films even after UV irradiation for 200 h. This result exhibits that the cleaved fraction of the tie chains was too low to cause the traceable disorientation of lamellae.     

Electron irradiation induced microstructural modifications in BaCl2 doped PVA: A positron annihilation study

Thin films of pure and 10 wt% BaCl₂ doped poly(vinyl alcohol) (PVA) were prepared by solution casting method. These films were subjected to electron irradiation for different doses ranging from 0 to 400 kGy in air at room temperature. The effect of electron irradiation on the optical and free volume related microstructures of these polymer films was studied using positron annihilation lifetime spectroscopy, FTIR and UV-vis techniques. The FTIR spectral studies indicate that the electron irradiation induces chemical modifications within the doped PVA, which results in chain scission as well as cross-linking of the polymer. The positron lifetime study on these irradiated polymers shows that the chain scissions and cross-linking within the polymer matrix affect the free volume content and hence the microstructure. The UV-vis optical absorption studies show that the induced microstructural change by electron irradiation also modifies the optical properties. Using UV-vis spectra, the optical energy band gap was estimated and it decreases with increase in electron dose. A correlation between positron results and optical results is obtained and electron irradiation induced microstructure modifications within the doped polymer are understood. The results highlight the usefulness of positron annihilation technique in the study of the microstructure of irradiated polymers.     

Synthesis and optical properties of fluorene and p-phenylenevinylene copolymers containing non-conjugated spacer

A series of alternating fluorene and p-phenylenevinylene copolymers containing non-conjugated spacer have been synthesized through the Wittig polycondensation reaction. These amorphous copolymers are highly soluble in common organic solvents and can be spin-cast to obtain transparent films. The effects of non-conjugated spacers in the main chain and the methoxyl groups on the side chain on the thermal behavior, photoluminescence (PL) and electroluminescence (EL) properties of these copolymers have been investigated in detail. Single-layered light-emitting diodes (LEDs) have been fabricated in the configuration of ITO/PEDOT/copolymer/Ca/Al and emitted blue light in the range of 456-492 nm. The measurements of current vs voltage show turn-on voltages at 6.2-12.4 V. Among the LEDs based on the six copolymers, the maximum EL brightness and efficiency of the LED based on P1 containing 4CH₂ aliphatic segment length in the main chain and without methoxyl groups on side chain are reached 3936 cd/m² and 0.70 cd/A, respectively.     

Photocrosslinking of poly(N-vinylcarbazole): Implementing a complementary set of techniques to characterize the three-dimensional network formation

The crosslinking of poly(N-vinylcarbazole) PVK resulting from UV irradiation (λ > 300 nm) was studied by combining various techniques including infrared spectroscopy, size exclusion chromatography (SEC), differential scanning calorimetry (DSC), swelling ratio, positron annihilation spectroscopy (PAS) and thermoporosimetry. The results obtained from all of these techniques were correlated and allowed a complete monitoring of the crosslinking during irradiation, from the creation of the first crosslinks to the formation and densification of the three-dimensional network. From SEC analysis and determination of swelling ratios, it was demonstrated that crosslinking was the predominant mechanism during the first stages of irradiation. PAS and DSC analyses revealed a good correlation between variations of free volume and increase of glass transition (T_g) of the bulk material. In addition, the development of the polymer architecture shown by the growth of T_g was nicely correlated with the modifications of the chemical structure observed by infrared analysis. Thermoporosimetry allowed the determination of the mesh size distributions within the polymer for the longest irradiation times. Numerical relationships were established and their validity was checked.     

Synthesis by ATRP and effects of molecular weight on photomechanical properties of liquid crystalline polymers containing side-chain azobenzene chromophores

The synthesis of a series of azobenzene containing liquid crystalline methacrylic homopolymers, poly(4-ω-methacryloyloxy-hexyloxy-4′-ethoxyazobenzene) [Poly(M6A)], with distinct average chain lengths and low polydispersity has been achieved by Atom Transfer Radical Polymerization (ATRP) in THF solution using allyl 2-bromoisobutyrate as initiator and Cu(I)Br as catalyst. Under the adopted conditions the living centers concentration is found to be constant throughout the polymerization process and well defined chain end-groups are obtained. All the obtained polymeric samples, having average molecular mass ranging from 3300 to 14000 g/mol, exhibit smectic and nematic liquid-crystalline phases on heating, with transition temperatures strongly dependent on polymerization degree, as characterized by differential scanning calorimetry and polarized optical microscopy.The photomechanical effects (i.e. the dependence of volume and density) exhibited upon trans-to-cis and cis-to-trans photoisomerization of the azobenzene mesogenic groups have been investigated by ellipsometry and related to molecular weight, with particular attention to important parameters for potential applications such as the relative variation of total volume, response time, stability and reproducibility.     

Design,synthesis, and characterization of a combined main-chain/side-chain liquid-crystalline polymer based on ethyl cellulose

A novel combined main-chain/side-chain liquid-crystalline polymer based on an ethyl cellulose main chain containing azobenzene mesogens (AzoEC) was successfully synthesized. Molecular characterization of the resulting polymers with different degrees of substitution (DS) was performed with proton nuclear magnetic resonance (¹H NMR), Fourier-transform infrared spectroscopy (FTIR), and gel permeation chromatography (GPC). Thermal stability was investigated by thermogravimetric analysis (TGA). The phase transitions and liquid-crystalline behavior of these polymers were investigated by differential-scanning calorimetry (DSC), polarized optical microscopy (POM), and wide-angle X-ray diffraction (WAXD). The results indicate that DS has substantial effect on the liquid-crystalline behavior of these polymers. AzoEC with low DS only shows the cholesteric phase similar to ethyl cellulose (EC). However, when DS increases to a specific value, AzoEC begins to show fascinating supramolecular structures. The supramolecular structure of AzoEC with maximum DS consisted of a large-scale ordered lamellar structure formed by EC main chains and a small-scale ordered structure formed by azobenzene mesogens.     

Bacterial polyesters grafted with poly(ethylene glycol): Behaviour in aqueous media

An easy method for grafting of poly(3-hydroxyoctanoate-co-3-hydroxyundecenoate) (PHOU) was developed. Oxidation of the pendant double bonds of PHOU into carboxyl groups to yield poly(3-hydroxyoctanoate-co-3-hydroxy-9-carboxydecanoate) (PHOD) and the esterification of the carboxyl side groups with poly(ethylene glycol) (PEG) were carried out in a single reaction solution. The grafting yield is dependent on the molar mass of the PEG graft. The maximum carboxyl group conversion (52%) was obtained with PEG M_n = 350 and decreased with increasing molar mass of PEG (19% for PEG M_n = 2000). Yields were determined by ¹H and ¹³C NMR. Short PEG grafts lowered the glass transition temperature (PHOD-g-PEG 350 −57 °C) compared to PHOD (−19 °C) and PHOU (−39 °C). This effect depends on the COOH conversion and PEG chain length. Grafting enhanced the hydrophilic character of the modified polymers making them soluble in polar solvents, such as alcohols and water/acetone mixtures. PHOD-g-PEG films were more stable towards hydrolytic degradation as PHOD films. No obvious modification of films was observed after more than 200 days at pH 7.2 and 37 °C. The molar mass of the grafted polymers decreased only slightly during this period, while PHOD films were hydrolyzed into soluble fragments.     

Voltammetric determination of boron by using Alizarin Red S

Cordycepin is the main active metabolite of Cordyceps militaris extracts; according to recent studies it has interesting therapeutic activities. A new capillary electrophoresis (CE) procedure with UV detection at 254 nm for determination of cordycepin was developed and optimized. Optimal conditions found were 20 mM sodium borate buffer with 28.6% methanol, pH 9.5, separation voltage 20 kV, hydrodynamic injection time 10 s and temperature 25 °C. Linearity was found over the 20-100 μg/mL concentration ranges of cordycepin. The developed method has been applied for determination of cordycepin in various pharmaceutical products. A comparison was made between CE and a high performance liquid chromatography (HPLC) method. Both of these methods gave comparable results. The shorter analysis time and low running cost are the main advantages of CE method.     

Enhancement in sensitivity of nitro blue tetrazolium polyvinyl alcohol film dosimeters by sodium formate and Triton X-100

Nitro blue tetrazolium polyvinyl alcohol film dosimeters, NBT-PVA were prepared and evaluated based on radiation-induced reduction of NBT²⁺. NBT-PVA film dosimeters containing different concentrations of NBT dye from 1 to 5 mM were prepared in a solution of ethanol. The dosimeters were irradiated with ?-ray from ⁶⁰Co source at doses up to 50 kGy. UV/vis spectrophotometer was used to investigate the optical density of un-irradiated and irradiated films in terms of absorbance at 529 nm. The absorbance increases with absorbed dose up to 50 kGy for NBT-PVA film dosimeters. The dose sensitivity of NBT-PVA film increases strongly with increase of concentrations of NBT dye. The effects of irradiation temperature, humidity, dose rate and the stability of the response of the films after irradiation were investigated. A considerable increase was observed in the dose response of NBT-PVA film by adding appropriate concentration of sodium formate and Triton X-100.     

Bi2WO6 photocatalytic films fabricated by layer-by-layer technique from Bi2WO6 nanoplates and its spectral selectivity

Bi₂WO₆ multilayer films have been fabricated successfully by a layer-by-layer (LbL) technique from Bi₂WO₆ nanoplates, which show higher visible-light photoactivity (λ>420 nm) than that of Bi₂WO₆ nanoplate powders and P25 TiO₂ films. The films were characterized by X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), and UV-visible absorption spectroscopy. Photocatalytic activities of the films were evaluated by the rhodamine B (RhB) decomposition under UV and visible-light irradiation. Thickness and photoactivity of the film can be modified easily by changing the deposition cycles. Bi₂WO₆ films have the spectral selectivity of the photocatalytic degradation of RhB. Under the wavelength greater than 300 nm, the RhB molecules tend to be transformed to rhodamine over Bi₂WO₆ films selectively. However, in the case of shorter wavelength (λ=254 nm) light irradiation, the RhB molecules can be photodegraded completely.