Removal of uranium(VI) from aqueous solutions using nanoporous ZnO prepared with microwave-assisted combustion synthesis

The adsorption of the uranyl ions from aqueous solutions on the nanoporous ZnO powders has been investigated under different experimental conditions. The adsorption of uranyl on nanoporous ZnO powders were examined as a function of the contact times, pH of the solution, concentration of uranium(VI) and temperature. The ability of this material to remove U(VI) from aqueous solution was followed by a series of Langmuir and Freunlinch adsorption isotherms. The adsorption percent and distribution coefficient for nanoporous ZnO powders were 98.65 % ± 1.05 and 7,304 mL g^?1, respectively. The optimum conditions were found as at pH 5.0, contact time 1 h, at 1/5 Zn²⁺/urea ratio, 50 ppm U(VI) concentration and 303 K. The monomolecular adsorption capacity of nanoporous ZnO powders for U(VI) was found to be 1,111 mg g^?1 at 303 K. Using the thermodynamic equilibrium constants obtained at different temperatures, various thermodynamic parameters, such as ΔG°, ΔH° and ΔS°, have been calculated. Thermodynamic parameters (ΔH° = 28.1 kJ mol ^?1, ΔS° = 160.30 J mol^?1 K^?1, ΔG° = ?48.54 kJ mol^?1) showed the endothermic and spontaneous of the process. The results suggested that nanoporous ZnO powders was suitable as sorbent material for recovery and adsorption of U(VI) ions from aqueous solutions.     

Removal of cationic methylene blue and malachite green dyes from aqueous solution by waste materials of Daucus carota

In present study adsorption capacity of waste materials of Daucus carota plant (carrot stem powder: CSP and carrot leaves powder: CLP) was explored for the removal of methylene blue (MB) malachite green (MG) dye from water. The morphology and functional groups present were investigated by scanning electron microscope (SEM) and Fourier transform infrared (FTIR) spectroscopy. The operating variables studied were pH, adsorbent dose, ionic strength, initial dye concentration, contact time and temperature. Equilibrium data were analysed using Langmuir and Freundlich isotherm models and monolayer adsorption capacity of adsorbents were calculated. Kinetic data were studied using pseudo-first and pseudo-second order kinetic models and the mechanism of adsorption was described by intraparticle diffusion model.Various thermodynamic parameters such as enthalpy of adsorption ΔH°, free energy change ΔG° and entropy ΔS° were estimated. Negative value of ΔH° and negative values of ΔG° showed that the adsorption process was exothermic and spontaneous. Negative value of entropy ΔS° showed the decreased randomness at the solid–liquid interface during the adsorption of MB and MG onto CSP and CLP.     

Valorization of two waste streams into activated carbon and studying its adsorption kinetics,equilibrium isotherms and thermodynamics for methylene blue removal

Wastes must be managed properly to avoid negative impacts that may result. Open burning of waste causes air pollution which is particularly hazardous. Flies, mosquitoes and rats are major problems in poorly managed surroundings. Uncollected wastes often cause unsanitary conditions and hinder the efforts to keep streets and open spaces in a clean and attractive condition. During final disposal methane is generated, it is much more effective than carbon dioxide as a greenhouse gas, leading to climate change. Therefore, this study describes the possible valorization of two waste streams into activated carbon (AC) with added value due to copyrolysis. High efficiency activated carbon was prepared by the copyrolysis of palm stem waste and lubricating oil waste. The effects of the lubricating oil waste to palm stem ratio and the carbonization temperature on the yield and adsorption capacity of the activated carbon were investigated. The results indicated that the carbon yield depended strongly on both the carbonization temperature and the lubricating oil to palm stem ratio. The efficiency of the adsorption of methylene blue (MB) onto the prepared carbons increased when the lubricating oil to palm stem ratio increased due to synergistic effect. The effects of pH, contact time, and the initial adsorbate concentration on the adsorption of methylene blue were investigated. The maximum adsorption capacity (128.89 mg/g) of MB occurred at pH 8.0. The MB adsorption kinetics were analyzed using pseudo-first order, pseudo-second order and intraparticle diffusion kinetic models. The results indicated that the adsorption of MB onto activated carbon is best described using a second order kinetic model. Adsorption data are well fitted with Langmuir and Freundlich isotherms. The thermodynamic parameters; ΔG°, ΔH° and ΔS° indicate that the adsorption is spontaneous and endothermic.     

Synthesis, characterization, and application of titanate nanotubes for Th(IV) adsorption

Titanate nanotubes (TNTs) have been synthesized by a hydrothermal method using rutile TiO₂ powder as titanium source. The determination of the structure and morphology was characterized by XRD, FTIR, SEM and TEM. The results indicate that the TNTs successfully synthesized under hydrothermal conditions of 150 °C. The adsorption of Th(IV) on TNTs was studied as a function of contact time, pH values, ionic strength, initial Th(IV) concentration and temperature under ambient conditions by using batch technique. The results indicate that adsorption of Th(IV) on TNTs is strongly dependent on pH values, but weakly dependent on ionic strength; Adsorption kinetics was better described by the pseudo-second-order model. The adsorption isotherms are simulated by Langmuir and Freundlich models well. ΔG°, ΔH° and ΔS° free energy were calculated from experimental data, The results indicate that the adsorption of Th(IV) on TNTs is an endothermic and a spontaneous process, and increases with increasing temperature. The adsorption of Th(IV) on TNTs is mainly dominated by chemical sorption or surface complexation.     

Assessment of <Emphasis Type="Italic">Urtica</Emphasis> as a low-cost adsorbent for methylene blue removal: kinetic,equilibrium, and thermodynamic studies

Methylene blue (MB) removal using eco-friendly, cost-effective, and freely available Urtica was investigated. The morphology of the adsorbent surface and the nature of the possible Urtica and MB interactions were examined using SEM analysis and the FTIR technique, respectively. Various factors affecting MB adsorption such as adsorption time, initial MB concentration, temperature, and solution pH were investigated. The adsorption process was analysed using different kinetic models and isotherms. The results showed that the MB adsorption kinetic follows a pseudo-second-order kinetic model and the isotherm data fit the Langmuir isotherm well. Thermodynamic parameters, such as ΔG°, ΔH°, and ΔS°, were also evaluated, and the results indicated that the adsorption process is endothermic and spontaneous in nature. The MB adsorption capacity of Urtica was found to be as high as 101.01 mg g^?1, higher than those of many other adsorbents studied in the literature. This superior adsorption capacity, along with the ready availability of Urtica, render this adsorbent potentially suitable for practical applications.     

Kinetic,isothermal and thermodynamic studies on Th(IV) adsorption by different modified activated carbons

In this study, the performance of modified adsorbents obtained from activated carbon for the adsorption of thorium(IV) ions from aqueous media was investigated. The analytical and spectroscopic methods such as FT-IR, BET, SEM and UV–Vis were used to examine the properties of the modified materials. According to the analysis results, the both adsorbents had large surface areas after modification. Then, temperature, pH, mixing time and solution concentration parameters were observed to determine optimum thorium adsorption conditions on modified materials. The obtained results from the experiments were applied different three kinetic models and adsorption isotherms and thermodynamic parameters were calculated and then all of the results were interpreted. The adsorption process for both adsorption systems was observed to be compatible with the pseudo-second-order kinetic model. The adsorption equilibrium data were best described by the Langmuir model for modified adsorbent with KMnO₄ and by the Freundlich model for modified adsorbent with NaOH. Furthermore, the calculated thermodynamic parameters (ΔG°, ΔH° and ΔS°) showed that the both adsorption processes were endothermic and spontaneous. The data show that modified adsorbents can be used as influential and low-cost adsorbents to remove thorium ion. Modified new adsorbents were highly selective for thorium ion in competitive adsorption studies.

     

Adsorption of Hg(II) Ions onto Binary Biopolymeric Beads of Carboxymethyl Cellulose and Alginate

The removal of Hg(II) ions from aqueous solution by adsorption onto cross-linked polymeric beads of carboxymethyl cellulose (CMC) and sodium alginate was studied at fixed pH (6) and room temperature 28 ± 0.2°C. The cross-linked polymeric beads were characterized by FTIR spectra. Sorption capacity of the polymer for the mercury ions was investigated in aqueous media consisting different amounts of mercury ions (2.5 to 100 mg dm^?3) and at different pH values (2 to 8). Adsorption behavior of Hg(II) ions could be modeled using both the Langmuir and Freundlich isotherms. The dynamic nature of adsorption was quantified in terms of several kinetic constants such as rate constants for adsorption (k₁) and Lagergreen rate constant (K_ad). The influence of various experimental parameters such as effect of pH, contact time, solid-to-liquid ratio, salt effect, and temperature effect etc. were investigated on the adsorption of Hg(II) ions.     

Adsorption of U(VI) from aqueous solution by cross-linked rice straw

Adsorption of U(VI) from aqueous solution by cross-linked rice straw(CRS) was studied with batch experiments. The adsorbent was characterized by Fourier transform infrared spectroscopy (FT-IR). The effect of contact time, initial pH, temperature, adsorbent amount and initial U(VI) concentration was investigated. Langmuir, Freundlich and Dubinin–Radushkevich (D–R) adsorption isotherms and two kinetic models of pseudo-first-order and pseudo-second-order were used to describe the adsorption process. The result showed that the adsorption process was highly pH dependent and the favorable initial pH was 5.0. The adsorption process was rapid within first 60 min and equilibrium reached at 100 min. The adsorption process could be well defined by the Langmuir isotherm and pseudo-second-order equation, which indicated that the chemical adsorption was the rate-limiting step. The thermodynamic parameters (?H°, ?S°, ?G°) of the adsorption system were also calculated. The negative value of ?H° and ?G° indicated that the reaction was endothermic and spontaneous in nature. All the above suggested that CRS has considerable potential for the removal of U(VI) from aqueous solution.     

An efficient p-tetranitrocalix[4]arene based adsorbent for the removal of carbofuran from aqueous media

Present study describes the adsorption of carbofuran (CF) from aqueous solutions using p-tetranitrocalix[4]arene based modified silica through batch and column methods. Various parameters were optimized including initial pesticide concentrations (5 mg L^?1), pH (2–10), contact time (60 min) and adsorbent dosage (30 mg). Modified silica was characterized by FT-IR and scanning electron microscope. The adsorption was further explained by Langmuir, Freundlich and Dubinin–Radushkevich (D–R) models. Moreover, adsorption kinetics and adsorption thermodynamics were also investigated. Adsorption in dynamic mode was evaluated by breakthrough volumes and the Thomas model, applying batch conditions using 30 mg of modified silica at pH 5. It has been noticed that CF removal efficiency of modified silica was 98 % as compared to bare silica (48 %). Adsorption of CF on modified silica was found to be multilayer and physical in nature. Consequently, adsorption obeys pseudo-second-order kinetic equation following external mass transfer diffusion process as the rate-limiting step. Thermodynamic parameter (ΔG, ΔS, ΔH) values suggest that the adsorption of CF is spontaneous and exothermic in nature. Thomas model rate constant k _TH (cm³ mg^?1 min^?1) and maximum solid phase concentration (q _o mg g^?1) was found to be 0.52 and 12.3, respectively, in dynamic mode.     

Adsorption of uranium from aqueous solution using biochar produced by hydrothermal carbonization

The ability of biochar produced by hydrothermal carbonization (HTC) has been explored for the removal and recovery of uranium from aqueous solutions. The micro-morphology and structure of HTC were characterized by Fourier transform infrared spectroscopy and scanning electron microscopy. The influences of different experimental parameters such as solution pH, initial concentration, contact time, ionic strength and temperature on adsorption were investigated. The HTC showed the highest uranium sorption capacity at initial pH of 6.0 and contact time of 50 min. Adsorption kinetics was better described by the pseudo-second-order model and adsorption process could be well defined by the Langmuir isotherm. The thermodynamic parameters, △G°(298 K), △H° and △S° were determined to be ?14.4, 36.1 kJ mol^?1 and 169.7 J mol^?1 K^?1, respectively, which demonstrated the sorption process of HTC towards U(VI) was feasible, spontaneous and endothermic in nature. The adsorbed HTC could be effectively regenerated by 0.05 mol/L HCl solution for the removal and recovery of U(VI). Complete removal (99.9 %) of U(VI) from 1.0 L industry wastewater containing 15.0 mg U(VI) ions was possible with 2.0 g HTC.     

Sorption study of uranium on carbon spheres hydrothermal synthesized with glucose from aqueous solution

The ability of oxygen-rich carbon spheres (CSs) produced by hydrothermal carbonization with the glucose has been explored for the removal and recovery of uranium from aqueous solutions. The micro-morphology and structure of CSs were characterized by FT-IR and SEM. The influences of different experimental parameters such as solution pH, initial concentration, contact time, ionic strength and temperature on adsorption were investigated. The CSs showed the highest uranium sorption capacity at initial pH of 6.0 and contact time of 25 min. Adsorption kinetics was better described by the pseudo-second-order model and adsorption process could be well defined by the Langmuir isotherm. The thermodynamic parameters, △G°(298 K), △H° and △S° were determined to be ?16.88, 12.09 kJ mol^?1 and 197.87 J mol^?1 K^?1, respectively, which demonstrated the sorption process of CSs towards U(VI) was feasible, spontaneous and endothermic in nature. The adsorbed CSs could be effectively regenerated by 0.05 mol/L HCl solution for the removal and recovery of U(VI). Complete removal (99.9 %) of U(VI) from 1.0 L industry wastewater containing 15.0 mg U(VI) ions was possible with 3.0 g CSs.     

Synthesis, characterization, thermodynamic and kinetic investigations on uranium (VI) adsorption using organic-inorganic composites: Zirconyl-molybdopyrophosphate-tributyl phosphate

Zirconyl-molybdopyrophosphate-tributyl phosphate (ZMPP-TBP) was a novel organic-inorganic composite adsorbent prepared by co-precipitation method and used in the adsorption of uranium from aqueous solution in batch adsorption experiments. The as-obtained product was characterized using SEM, energy dispersive X-ray spectroscopy (EDX), XRD and BET-N₂ adsorption measurements. The study had been conducted to investigate the effects of solution pH, temperature, contact time, initial concentration and coexisting ions. A maximum removal of 99.31% was observed for an initial concentration 5 mg/L, at pH 6.0 and an adsorbent dose of 1.0 g/L. The isothermal data were fitted with both Langmuir and Freundlich equations, but the data fitted the former better than the latter. According to the evaluation using the Langmuir equation, the maximum adsorption capacity of uranium (VI) was 196.08 mg/g at 293 K and pH 6.0. The pseudo-first-order kinetic model and pseudo-second-order kinetic model were used to describe the kinetic data, and the pseudo-second-order kinetic model was better. The thermodynamic parameter ΔG was calculated, the negative ΔG values of uranium (VI) at different temperature showed that the adsorption process was spontaneous. The good reusability of ZMPP-TBP also indicated that the ZMPP-TBP was a very promising adsorbent for uranium adsorption from aqueous solution.     

Synthesis of phosphorus-modified poly(styrene-co-divinylbenzene) chelating resin and its adsorption properties of uranium(VI)

A new phosphorus-modified poly(styrene-co-divinylbenzene) chelating resin (PS–N–P) was synthesized by P,P-dichlorophenylphosphine oxide modified commercially available ammoniated polystyrene beads, and characterized by Fourier transform infrared spectroscopy and elemental analysis. The adsorption properties of PS–N–P toward U(VI) from aqueous solution were evaluated using batch adsorption method. The effects of the contact time, temperature, pH and initial uranium concentration on uranium(VI) uptake were investigated. The results show that the maximum adsorption capacity (97.60 mg/g) and the maximum adsorption rate (99.72 %) were observed at the pH 5.0 and 318 K with initial U(VI) concentration 100 mg/L and adsorbent dose 1 g/L. Adsorption equilibrium was achieved in approximately 4 h. Adsorption kinetics studied by pseudo second-order model stated that the adsorption was the rate-limiting step (chemisorption). U(VI) adsorption was found to barely decrease with the increase in ionic strength. Equilibrium data were best modeled by the Langmuir isotherm. The thermodynamic parameters such as ?G ₀, ?H ₀ and ?S ₀ were derived to predict the nature of adsorption. Adsorbed U(VI) ions on PS–N–P resin were desorbed effectively (about 99.39 %) by 5 % NaOH–10 % NaCl. The synthesized resin was suitable for repeated use.     

Mesoporous polymer-coated PAN beads for environmental applications: fabrication,characterisation and uranium adsorption studies

Adsorption of U(VI) and other heavy metals on millimetre sized polymer-coated polyacrylinitrile (PAN) beads was investigated. PAN was used as scaffolds for the polymer layer thus producing porous material of high surface area, improved mechanical strength and improved adsorption capabilities. Extensive U(VI) adsorption studies were undertaken and results modelled using different kinetic and equilibrium models. Parameters including thermodynamic parameters were evaluated. Sorbent capacities were assessed as 124, 16, and 33 mg g^?1 for PCP, SPP and Dowex at 60 °C respectively. U(VI) adsorption mechanism for these adsorbents was postulated. Recovered uranium may be used for production of cheap electricity.     

Adsorption thermodynamic and desorption studies of U(VI) on modified silica gel (SiAPMS-HL)

In this study, the adsorption process was examined by various isotherm models Langmuir, Freundlich and Dubinin–Radushkevich and equilibrium data were successfully described by Langmuir model. Adsorption thermodynamics of uranium (VI) on modified silica gel (SiAPMS-HL) has been studied within a temperature range from 293 to 333 K and the thermodynamic parameters, such as equilibrium constant (K _D), standard free energy changes (ΔG°), standard enthalpy change (ΔH°) and standard entropy change (ΔS°), have been obtained. The desorption studies were conducted in batch system to investigate the kind, concentration and volume of the eluent.     

Recovery of Uranium(VI) from Sulfate Leach Liquor using Modified Duolite

Silicate mercapto Duolite composite ( SMDC ) and activated Duolite A 101 D ( AD ) were prepared, characterized, and tested for uranium removal from sulfate solution using batch experiment technique. The capability of newly adsorbents for sorption of uranium was estimated and optimized under different controlling variables, including the impact of uranium initial concentration, pH of the medium, equilibrium time, temperatures, dose and interfering ions. Testing of different adsorbents for adsorption isotherms revealed that the achieved experimental data were fitting well with the Langmuir isotherm model with 68.02 mg · g^–1 and 208.33 mg · g^–1 as theoretical capacity for AD and SMDC , respectively. Thermodynamic parameters have been resulted in negative values for ΔH and ΔS indicating an exothermic and decreased randomness behavior for uranium(VI) adsorption, while negative values of ΔG indicate spontaneous uranium adsorption. The kinetics studies showed that the adsorption process was controlled expressed by pseudo-second order model. Finally, the optimized factors have been applied for uranium(VI) recovery from Gattar leach liquor producing a uranium concentrate (Na₂U₂O₇) with uranium concentration of 70 % and purity of 93.33 %.     

Removal of radiocobalt from aqueous solution by Mg2Al layered double hydroxide

The adsorption behavior of radiocobalt by Mg₂Al layered double hydroxide (Mg₂Al LDH) was studied as a function of contact time, pH, ionic strength, foreign ions, FA and temperature under ambient conditions. The results showed that the kinetic adsorption could be described by a pseudo-second order model very well. The adsorption of Co(II) on Mg₂Al LDH was strongly dependent on pH and ionic strength. The presence of FA enhanced the adsorption of Co(II) on Mg₂Al LDH at low pH, whereas reduced Co(II) adsorption at high pH. The Langmuir model fitted the adsorption isotherms of Co(II) better than the Freundlich and D–R model at three different temperatures of 303, 323 and 343 K. The thermodynamic parameters (ΔH°, ΔS° and ΔG°) calculated from the temperature dependent adsorption isotherms indicated that the adsorption process of Co(II) on Mg₂Al LDH was endothermic and spontaneous. The results show that Mg₂Al LDH is a promising material for the preconcentration and separation of pollutants from large volumes of aqueous solutions.     

Insight from adsorption properties of Xylidyl Blue embedded hydrogel for effective removal of uranyl: Experimental and theoretical approaches

Applications of a hybrid material consisting of polyacrylamide (PAA) and Xylidyl Blue (XB) for the removal of uranyl ions from aqueous solutions has been investigated with all details. Adsorption experiments were performed at batch mode and constant temperature. Experimental parameters affecting adsorption process such as pH, initial uranyl concentration, time and temperature were studied on the removal of the uranyl ions. The isotherms assays were carried out with synthetic solutions and adsorption data were evaluated by using Langmuir, Freundlich and Dubinin–Radushkevich (D–R) isotherm models. Morphological and chemical characterizations of new synthesized material were investigated by UV-VIS-NIR spectroscopy and SEM/EDX techniques and pH_pzc experiments. The results of the kinetic experiments are consistent with pseudo-second-order models and intra-particle diffusion models with a slightly better fit to the latter. Equilibrium was achieved within 3 h. The value of rate constant for adsorption process was calculated as 1.055 mol⁻¹ kg min⁻¹ at 318 K. The calculated thermodynamic parameters (ΔG°, ΔH° and ΔS°) indicated that the adsorption of uranyl ions onto XB@PAA was feasible, spontaneous and endothermic nature under the studied temperature. The developed material has also a potential as a sensor because its color turn from pink to red by adsorption of uranyl ions.     

Removal of Th(IV), Ni(II)and Fe(II) from aqueous solutions by a novel PAN–TiO<Subscript>2</Subscript> nanofiber adsorbent modified with aminopropyltriethoxysilane

A novel polyacrylonitrile (PAN)–titanium oxide (TiO₂) nanofiber adsorbent functionalized with aminopropyltriethoxysilane (APTES) was fabricated by electrospinning. The adsorbent was characterized by SEM, FTIR, TEG and BET analyses. The pore diameter and surface area of the adsorbent were 3.1 nm and 10.8 m² g^?1, respectively. The effects of several variables, such as TiO₂ and amine contents, pH, interaction time, initial concentration of metal ions, ionic strength and temperature, were studied in batch experiments. The kinetic data were analyzed by pseudo-first-order, pseudo-second-order and double-exponential models. Two isotherm models, namely Freundlich and Langmuir, were used for analysis of equilibrium data. The maximum adsorption capacities of Th(IV), Ni(II) and Fe(II) by Langmuir isotherm were found to be 250, 147 and 80 mg g^?1 at 45 °C with pH of 5, 6 and 5, respectively, and greater adsorption of Th(IV) could be justified with the concept of covalent index and free energy of hydration. Calculation of ΔG°, ΔH° and ΔS° demonstrated that the nature of the Th(IV), Ni(II) and Fe(II) metal ions adsorption onto the PAN–TiO₂–APTES nanofiber was endothermic and favorable at a higher temperature. The negative values of ΔG° for Th(IV) showed that the adsorption process was spontaneous, but these values for Ni(II)and Fe(II) were positive and so the adsorption process was unspontaneous. Increasing of ionic strength improved the adsorption of Ni(II) and Fe(II) on nanofiber adsorbent but decreased the adsorption capacity of Th(IV). The adsorption capacity was reduced slightly after six cycles of adsorption–desorption, so the nanofiber adsorbent could be used on an industrial scale. The inhibitory effect of Ni(II) and Fe(II) on the adsorption of Th(IV) was increased with an increase in the concentration of inhibitor metal ions.     

Adsorptive Removal of Thorium(IV) from Aqueous Solutions Using Synthesized Polyamidoxime Chelating Resin: Equilibrium,Kinetic, and Thermodynamic Studies

In this study, an amidoximated chelating ion exchange resin was prepared by poly-acrylonitrile (PAN) grafted potato starch. The adsorbent characterizations such as specific surface area, pore volume, average pore radius, and Fourier transform infrared (FTIR) spectrum of the resin were measured. The effects of pH, adsorbent dosage, contact time, initial concentration of thorium ion, and temperature on adsorption of thorium ion from aqueous solutions were investigated. Four isotherm models including Langmuir, Freundlich, Dubinin-Radushkevich, and Temkin were applied to analyze the equilibrium isotherm data. The results showed that Langmuir and Temkin models had a good agreement with experimental data. The maximum capacity of the adsorbent using the Langmuir isotherm model was 227.27 mg · g^?1. The kinetic models like pseudo-first-order, pseudo-second-order, Elovich, and intraparticle were examined to describe the adsorption process. The kinetics of the adsorption process was found to follow the pseudo-second-order kinetic model. The thermodynamic parameters (ΔG°, ΔH°, ΔS°) were also calculated using equilibrium constant values at various temperatures (25, 35, 45, 55°C) and the positive value for ΔH° showed an endothermic adsorption process. The study suggests that the prepared adsorbent has promising potential for the removal of thorium from wastewaters.