电化学石英晶体微天平研究普鲁士蓝修饰电极

石英晶体徽天平(Quartz Crystal Microbalance,简称QCM)是一种非常灵敏的质量传感器,其检测能力可达ng级。QCM在化学中的早期应用是检测大气中的徽量成分,目前仍较活跃。由于石英压电晶体浸入溶液后在晶体/溶液界面存在较大的能量损失而不能够稳定振荡,致使QCM的应用较长时间局限于气相。八十年代初石英压电晶体在液相中的振荡终获成功,开辟了QCM应用的一个全新领域。液相中振荡成功后,QCM很快应用于电化学研究。目前已发展成为一种全新的电化学传感器——电化学石英晶体微天平(EQCM),并已用于金属电沉积、电化学腐蚀、电分析等方面的研究。     

CTAB-promoted prussian blue-modified electrode and its cation transport characteristics for K+, Na+, Li+, and NH4+ ions

A Prussian blue (PB) film was deposited on a glassy carbon (GC) electrode by cyclic voltammetry in the presence of the cationic surfactant cetyltrimethylammonium bromide (CTAB). The electrode thus formed showed 4-fold enhancements in redox current and charge values in pure KCl electrolyte as well as greater stability than an electrode prepared in the absence of CTAB. This improved performance of a PB+CTAB electrode versus a PB electrode was further demonstrated using SEM, XRD, and electrochemical impedance spectroscopy (EIS) measurements. A comparative study was undertaken on the cation transport characteristics of PB and PB+CTAB electrodes for Na+, Li+, and NH4+ ions. We obtained a CV pattern for a CTAB-promoted PB film, which showed ideal Nernstian behavior at all scan rates from 5 to 140 mV s(-1). Conditions for the formation and preservation of these ideal and stable PB films are discussed. Possible mechanisms for the beneficial effects of CTAB are proposed.     

Polycarbonates as alternative electrolyte host materials for solid-state sodium batteries

This paper describes the first implementation of the aliphatic polycarbonate PTMC – that has previously been successfully applied to lithium polymer batteries – as a non-polyether host matrix in solid-state sodium batteries. Despite higher glass transition temperatures of PTMC–NaTFSI and PTMC–NaClO₄ electrolytes than their Li-containing counterparts, the ionic conductivities were found to be similar to the equivalent Li salt electrolytes. Finally, the functionality of PTMC–NaTFSI was demonstrated through cycling of Na/Prussian blue half-cells displaying high discharge capacities and limited polarization at C/10 and 60 °C.     

Cellular cation transport studied by 6/7Li and 23Na NMR in a porous Mo132 Keplerate type nano-capsule as model system

Li+ ions can interplay with other cations intrinsically present in the intra- and extra-cellular space (i.e. Na+, K+, Mg2+ and Ca2+) have therapeutic effects (e.g. in the treatment of bipolar disorder) or toxic effects (at higher doses), likely because Li+ interferes with the intra-/extra-cellular concentration gradients of the mentioned physiologically relevant cations. The cellular transmembrane transport can be modelled by molybdenum-oxide-based Keplerates, i.e. nano-sized porous capsules containing 132 Mo centres, monitored through 6/7Li as well as 23Na NMR spectroscopy. The effects on the transport of Li+ cations through the 'ion channels' of these model cells, caused by variations in water amount, temperature, and by the addition of organic cationic 'plugs' and the shift reagent [Dy(PPP)2](7-) are reported. In the investigated solvent systems, water acts as a transport mediator for Li+. Likewise, the counter-transport (Li+/Na+, Li+/K+, Li+/Cs+ and Li+/Ca2+) has been investigated by 7Li NMR and, in the case of Li+/Na+ exchange, by 23Na NMR, and it has been shown that most (in the case of Na+ and K+, all (Ca2+) or almost none (Cs+) of the Li cations is extruded from the internal sites of the artificial cell to the extra-cellular medium, while Na+, K+ and Ca2+ are partially incorporated.     

Ion-specific swelling of poly(styrene sulfonic acid) hydrogel

Poly(styrene sulfonic acid) (PSSA) hydrogel was prepared by radiation crosslinking using methyl N,N-bis-acrylamide as crosslinker. Effects of ion species and concentration on the swelling behavior of PSSA hydrogel were investigated in aqueous solution of selected anions (F-, Cl-, Br-, SCN-), cations (Li+, Na+, K+, Ca2+), and hydrophobic ions (tetramethylammonium cation TMA+, tetrabutylammonium cation TBA+, and dodecyltrimethylammonium cation TAB+). The deswelling extent of PSSA hydrogel follows anion Hofmeister series, i.e., SCN- < Br- < Cl- < F-, in solutions containing selected anions and K+ as counterion up to a concentration of 2 mol.L(-1). On the contrary, the deswelling extent of PSSA hydrogel in solutions containing selected cations and Cl- follows the sequence of Li+ < Na+ < K+ < Ca2+, which is the reverse of the Hofmeister series except Ca2+. We have discussed the effects of ions on the hydrogen bonding through SO3- and phenyl ring in salt solutions at low and high concentrations. Other interactions, such as the cation-pi and hydrophobic interactions, also contributed to the ion-specific swelling of PSSA hydrogel. The proposed mechanism was further elucidated by FTIR and NMR analysis. A very specific deswelling-reswelling phenomenon of PSSA hydrogel in KF solution has been observed and ascribed to the F- binding to phenyl ring through a specific interaction.     

Electrochemically deposited thiophene-based polymers as protective agents for Prussian Blue thin films

A composite material based on overlapped layers of electrochemically synthesized Prussian Blue (PB) and terthiophene-derived polymer is described, aiming at enhancing the stability of the hexacyanoferrate thanks to the protective action of the polymer. Two bilayer configurations and deposition methods (for the polymer component) were tested. The morphology and electrochemical behavior in organic solvent and in aqueous solutions containing different supporting electrolytes were carried out. The best performances of electrodes modified with films of the composite material as to increased stability of PB were achieved with the potentiostatically deposited polymer covering the PB layer, in acetate buffer at pH 5.5. As for potential cycling stress, the anodic and cathodic peak currents due to PB were not decreased after 20 cycles. Conversely, PB alone displayed the anodic peak currents relevant to PB/Prussian White (PW) and PB/Berlin Green (BG) systems decreased by about 30 %. The stability to local pH increase was assessed by cyclic voltammetry after electrochemical reduction of H₂O₂. For example, the anodic peak currents were decreasing by 15 % and 5 % for the two PB redox systems, while for PB alone the same currents decreased by 35 % and 10 %. The response sensitivity to hydrogen peroxide was improved by 54 %, with respect to PB alone, as evaluated by chronoamperometry.     

Effects of counter ions of clay platelets on the swelling behavior of nanocomposite gels

The effects of replacing the native Na(+) counter ions associated with the clay platelets by various other cations on the swelling behavior of nanocomposite (NC) gels consisting of an organic (polymer)/inorganic (clay) network were investigated. The negative surface charge of the clay platelet conferred an ionic nature on the NC gels making them a type of polyelectrolyte gel; consequently, the swelling behavior of the NC gels was strongly influenced by the valence of the co-existing counter ions. NC gels containing monovalent cations such as Na(+), K(+) and Li(+) exhibited large swellings and subsequent deswelling in water after attaining maximum degrees of swelling. In contrast, introduction of multivalent cations such as Ca(2+), Mg(2+), and Al(3+) into NC gels depressed markedly both the swelling and subsequent deswelling. The decreased swelling and suppressed deswelling with multivalent ions were strongly influenced by the initial gel state and result from the formation of additional cross-links through ionic interactions between the clay platelets and the multivalent cations. Also, the similar swelling behaviors were observed for all NC gels with different clay concentration. Further, reversible absorption/desorption and selective absorption of multivalent cations were observed for the NC gels examined.     

Oligoether-strapped calix[4]pyrrole: an ion-pair receptor displaying cation-dependent chloride anion transport

A ditopic ion-pair receptor (1), which has tunable cation- and anion-binding sites, has been synthesized and characterized. Spectroscopic analyses provide support for the conclusion that receptor 1 binds fluoride and chloride anions strongly and forms stable 1:1 complexes ([1·F](-) and [1·Cl](-)) with appropriately chosen salts of these anions in acetonitrile. When the anion complexes of 1 were treated with alkali metal ions (Li(+), Na(+), K(+), Cs(+), as their perchlorate salts), ion-dependent interactions were observed that were found to depend on both the choice of added cation and the initially complexed anion. In the case of [1·F](-), no appreciable interaction with the K(+) ion was seen. On the other hand, when this complex was treated with Li(+) or Na(+) ions, decomplexation of the bound fluoride anion was observed. In contrast to what was seen with Li(+), Na(+), K(+), treating [1·F](-) with Cs(+) ions gave rise to a stable, host-separated ion-pair complex, [F·1·Cs], which contains the Cs(+) ion bound in the cup-like portion of the calix[4]pyrrole. Different complexation behavior was seen in the case of the chloride complex, [1·Cl](-). Here, no appreciable interaction was observed with Na(+) or K(+). In contrast, treating with Li(+) produces a tight ion-pair complex, [1·Li·Cl], in which the cation is bound to the crown moiety. In analogy to what was seen for [1·F](-), treatment of [1·Cl](-) with Cs(+) ions gives rise to a host-separated ion-pair complex, [Cl·1·Cs], in which the cation is bound to the cup of the calix[4]pyrrole. As inferred from liposomal model membrane transport studies, system 1 can act as an effective carrier for several chloride anion salts of Group 1 cations, operating through both symport (chloride+cation co-transport) and antiport (nitrate-for-chloride exchange) mechanisms. This transport behavior stands in contrast to what is seen for simple octamethylcalix[4]pyrrole, which acts as an effective carrier for cesium chloride but does not operates through a nitrate-for-chloride anion exchange mechanism.     

Electrochemical and electrocatalytic stability of Prussian blue/Berlin green redox transformation in Prussian blue-polypyrrole composite films

Redox transformation of Prussian blue to Berlin green (PB/BG) in Prussian blue-polypyrrole (PB-PPy) composites synthesized via original one-step method has been studied. It was shown that the nature of anion and composition of background electrolyte play an important role for both the stability and the shape of electrochemical response of composite film during redox transfer of Prussian blue to Berlin green. Nitric acid, phosphoric acid, malic acid and citric acid 0.05 N (eq/L) solutions and the same acids partially neutralized with 0.01 N KOH were used as electrolyte to study the role of potassium ions presence in solution. The most stable electrochemical response of PB/BG redox transfer was obtained for the nitrate anions containing solutions in the presence of potassium ions. Nevertheless, the stability of the electrochemical transformation PB/BG in composite films in other media is enough to detect the sulphite ions content in wine samples via electrocatalytic reaction at the potentials of PB/BG redox transformation.

     

Electrochemical synthesis of layered manganese oxides intercalated with tetraalkylammonium ions

Thin films of birnessite-type layered manganese oxides with various interlayer spacings have been prepared on a platinum electrode by a one-step electrochemical procedure. The process involves a potentiostatic oxidation of aqueous Mn(2+) ions at around +1.0 V (Ag/AgCl) in the presence of tetraalkylammonium cations with different alkyl chain lengths. X-ray diffraction indicates that the films deposited with tetrabutylammonium (TBA), tetrapropylammonium (TPA), and tetraethylammonium (TEA) ions are composed of a single phase where unhydrated tetraalkylammonium ions are accommodated as a monolayer between manganese oxide layers. The interlayer spacing of the products increases in an order of TEA < TPA < TBA. The film deposited with tetramethylammonium (TMA) is a mixture of two phases relating to hydrated and unhydrated guest cations, the former being predominant probably as a result of less hydrophobic property of TMA compared to that of other tetraalkylammonium ions. The TBA(+)-intercalated Mn oxide film-coated electrode exhibits a good charge/discharge property in a KCl solution between 0 and +0.8 V. In this case, TBA(+) ions between the Mn oxide layers are rapidly replaced with K(+) in solution by ion exchange, accompanying a shrinkage of the interlayer. The incorporated K(+) ions as well as protons play an important role in the electrochemical conversion between Mn(4+) and Mn(3+) in the oxide layer. In the TBACl solution, the interlayer TBA(+) ions can be excluded electrochemically during the positive-going scan, concomitant with the oxidation of Mn(3+) sites. This causes an anodic current and the accompanying shrinkage of the interlayer. On the reverse scan, however, the compressed interlayer does not allow the incorporation of bulky TBA(+) ions from the electrolyte, with virtually no cathodic current observed. Such an obvious difference in electrochemical behavior between the two electrolytes can be recognized by considering that most of the Mn oxide surface is present inside the layered structure, not on the external surface. This indicates that the layered structure is formed over the entire film.     

Solvate Ionic Liquids for Li,Na, K,and Mg Batteries

From the viewpoint of element strategy, non‐Li batteries with promising negative and positive electrodes have been widely studied to support a sustainable society. To develop non‐Li batteries having high energy density, research on electrolyte materials is pivotal. Solvate ionic liquids (SILs) are an emerging class of electrolytes possessing somewhat superior properties for battery applications compared to conventional ionic liquid electrolytes. In this account, we describe our recent efforts regarding SIL‐based electrolytes for Li, Na, K, and Mg batteries with respect to structural, physicochemical, and electrochemical characteristics. Systematic studies based on crystallography and Raman spectroscopy combined with thermal/electrochemical stability analysis showed that the balance of competitive cation?anion and cation?solvent interactions predominates the stability of the solvate cations. We also demonstrated battery applications of SILs as electrolytes for non‐Li batteries, particularly for Na batteries.     

The effect of the steric hindrance on metallic cation conduction in polymer electrolytes

2,6-Di-t-butylphenol and oligo(ethylene oxide) bound covalently to polyisocyanate were synthesized and characterized. The ionic conductivities of their Li, Na, and K phenolates were studied at various temperatures. The conductivities were in the range of 10^?7?10^?5 S/cm at 30°C. The conductivity of Na and K salts was approximately 10² greater than that of the Li salts. The t-butyl groups serve to dissociate K and Na ions from the phenoxide. The cations, therefore, are more mobile as a result increasing the conductivity. The temperature dependence of ionic conductivity suggests that the migration of ions is controlled by segmental motion of the polymer, shown by linear curves obtained in Vogel–Tammann–Fulchere plots. The polyisocyanate backbone is a rather stiff structure, however, a flexible oligo(ethylene oxide) side chain forms complexes with metal ion. Since the ion transport is associated with the local movement of polymer segments, the rigidity of the polymer backbone does not have much influence on the ion mobility.     

聚电解质中阳离子对铁氰化钾还原过程影响的原位显微红外光谱电化学

采用原位显微红外光谱电化学方法研究了聚电解质中不同阳离子（Ｌｉ＋,Ｎａ＋,Ｋ＋和ＴＢＡ＋）存在下铁氰化钾的电化学还原过程．观察到支持电解质阳离子对Ｆｅ（ＣＮ）３－／４－６振动频率的影响,探讨了还原反应机理     

Potentiodynamic deposition of Prussian blue from a solution containing single component of ferricyanide and its mechanism investigation

Potentiodynamic techniques were used for the direct electrodeposition of Prussian blue nano-clusters from an acidic solution of ferricyanide. Electrochemical, EQCM, IR, AFM, and UV/vis measurements were carried out to characterize deposited nano-sized Prussian blue and to explore the formation mechanism. Results showed that ferricyanide could partially dissociate to free ferric and cyanide ions. The driving force of this dissociation is the formation of PB and the evolution of HCN. The optimal potential window for the potentiodynamic formation of PB from an acidic solution (pH 1.6) is between –0.5 V and 0.4 V. In addition, the influence of surface adsorption of CN^- ions on the formation of PB was discussed.Dedicated to Professor W. Vielstich on the occasion of his 80th birthday.     

Tracking the optical mass centroid of single electroactive nanoparticles reveals the electrochemically inactive zone

The inevitable microstructural defects, including cracks, grain boundaries and cavities, make a portion of the material inaccessible to electrons and ions, becoming the incentives for electrochemically inactive zones in single entity. Herein, we introduced dark field microscopy to study the variation of scattering spectrum and optical mass centroid (OMC) of single Prussian blue nanoparticles during electrochemical reaction. The “dark zone” embedded in a single electroactive nanoparticle resulted in the incomplete reaction, and consequently led to the misalignment of OMC for different electrochemical intermediate states. We further revealed the dark zones such as lattice defects in the same entity, which were externally manifested as the fixed pathway for OMC for the migration of potassium ions. This method opens up enormous potentiality to optically access the heterogeneous intraparticle dark zones, with implications for evaluating the crystallinity and electrochemical recyclability of single electroactive nano-objects.

The schematic of single cubic-shaped Prussian blue (PB) mesocrystals formed by the oriented aggregation of small nanocrystals. The dark-field images of single PB nanoparticle at PB and Prussian white (PW) states, respectively.     

Theoretical and gas-phase studies of specific cationized purine base quartet

Guanine tetraplexes are biological non-covalent systems stabilized by alkali cations. Thus, self-clustering of guanine, xanthine and hypoxanthine with alkali cations (Na(+), K(+) and Li(+)) is investigated by electrospray ionization mass spectrometry (ESI-MS) in order to provide new insights into G-quartets, hydrogen-bonded complexes. ESI assays displayed magic numbers of tetramer adducts with Na(+), Li(+) and K(+), not only for guanine, but also for xanthine bases. The optimized structures of guanine and xanthine quartets have been determined by B3LYP hybrid density functional theory calculations. Complexes of metal ions with quartets are classified into different structure types. The optimized structures obtained for each quartet explain the gas-phase results. The gas-phase binding sequence between the monovalent cations and the xanthine quartet follows the order Li(+) > Na(+) > K(+), which is consistent with that obtained for the guanine quartet in the literature. The smallest stabilization energy of K(+) and its position versus the other alkali metal ions in guanine and xanthine quartets is consistent with the fact that the potassium cation can be located between two guanine or xanthine quartets, for providing a [gua(or (xan))(8)+K](+) octamer adduct. Even if an abundant octamer adduct with K(+) for xanthine was detected by ESI-MS, it was not the case for guanine.     

Urea Biosensor Based on Electrochromic Properties of Prussian Blue

Prussian blue (PB) is an electrochromic material, which can be used as a signal transducer in the formation of optical urea biosensors. The previous researches in electrochromic properties of PB demonstrated the optical PB response to ammonium ions, which occurs when ammonium ions are interacting with PB layer at a constant 0.2 V vs Ag|AgCl|KCl_sat potential. In this work PB optical dependence on ammonium ions concentration was applied in the formation of electrochromic urea biosensor. Biosensor was formed by modifying the optically transparent indium tin oxide (ITO) coated glass electrode (glass/ITO) with Prussian blue layer and immobilizing urease (glass/ITO/PB‐urease). Calibration curve showed the linear dependency (R²=0.995) between the change of maximal absorbance (ΔA) and urea concentration in concentration range varying from 3 mM to 30 mM. The highest sensitivity (4 ΔA M^?1) of glass/ITO/PB‐urease biosensor is in the concentration range from 7 mM to 30 mM. It was determined that working principle of the glass/ITO/PB‐urease biosensor is not related to pH changes occurring during enzymatic hydrolysis of urea.     

Specific influence of univalent cations on the ionization of alumina-coated TiO2 particles and on the adsorption of poly(acrylic)acid

A surface counterion titration method was used to monitor the interaction of monovalents cations (Li(+), Na(+), TMA(+)) with the surface of alumina-coated TiO(2) particles in concentrated media at different pH and electrolyte concentrations. This method allows measuring separately the negative and positive contribution to the surface charge. It showed that Cl(-) and TMA(+) are indifferent ions, but Li(+) and Na(+) specifically adsorb on the non-ionized alumina surface sites. The binding sequence of cations is Li(+)>Na(+)>TMA(+) at all ionic strengths investigated and is consistent with the structure-making and structure-breaking model developed a few decades ago. Polyacrylic acid (PAA) previously neutralized with the corresponding hydroxide (LiOH, NaOH, TMAOH) has been adsorbed on the alumina surface at different pH. The polymer counterion has a significant influence on the polymer adsorption. The sequence of the surface coverage as a function of the polymer counterion follows the order Li-PAA > Na-PAA > TMA-PAA. The much higher surface coverage with Li-PAA and Na-PAA compared to TMA-PAA is explained by the specific adsorption of Li-PAA and Na-PAA on the nonionized alumina surface sites, the same way LiCl and NaCl do.     

自组装杂化离子通道膜的构筑及阳离子传输机制

以3-异氰酸丙基三乙氧基硅烷和对甲氧基苯胺为原料合成了一种可以自组装形成有机-无机杂化材料的化合物--3-(脲基-4-甲氧基苯基)丙基三乙氧基硅烷. 采用FT-IR, ¹H NMR, DSC 和XRD 分析方法对该化合物的结构以及结晶性进行了表征. 将该化合物与聚乙烯醇(PVA)共混, 利用化合物的自组装性质构筑结构均一且致密无孔的离子通道杂化膜, 通过自制的膜运输实验装置测定膜对阳离子的传输性能并提出了相应的传输机制. SEM 照片显示, 自组装杂化膜致密无缺陷, 膜厚度为8 μm. 选择5 种阳离子进行运输实验测试, 结果表明, 自组装杂化离子通道膜对一价的碱金属离子Li⁺, Na⁺和K⁺有很好的传输功能, 这要归功于杂化材料中甲氧基苯基与碱金属阳离子形成的阳离子-π相互作用力. 碱金属阳离子在膜中的扩散过程可由溶解-扩散机制来解释, 结果显示, Li⁺, Na⁺和K⁺在杂化膜中传输的渗透率大小为: P_Na⁺ > P_K⁺ > P_Li⁺ , 说明本研究中的的自组装杂化离子通道膜对Na⁺有优先选择性. 杂化离子通道膜对二价的Ca²⁺和Mg²⁺没有传输作用, 此结果给一二价阳离子的分离带来很好的研究思路.     

Polymerization of Transition Metal Complexes in Solid Polymer Electrolyte Membranes

Prussian blue (PB), which is a mixed-valent polynuclear metal complex, was formed in the presence of the solid polymer electrolyte membrane Nafion (Nf). According to the stepwise dipping method, in which either Fe²⁺ or Fe(CN)₆ ^3? of the component ions of PB was first incorporated into the matrix membrane and then the membrane was immersed into a solution containing the other component ion, a thin layer of PB was deposited on the surface of Nf or inside Nf depending upon the sequence of incorporation of the component ions. A dissipative structure of periodic PB layer deposit inside Nf was found to be formed under a specific condition of the stepwise method. PB was also formed inside Nf as a broader line by the countercurrent diffusion method in which both component ions were incorporated into Nf from opposite surfaces. The position of PB in Nf varied with the concentration ratio of Fe²⁺ to Fe(CN)₆ ^3? in this case.