Li<Subscript>1−<Emphasis Type="BoldItalic">x</Emphasis></Subscript>Sm<Subscript>1+<Emphasis Type="BoldItalic">x</Emphasis></Subscript>SiO<Subscript>4</Subscript> as solid electrolyte for high temperature solid-state lithium batteries

Lithium lanthanoid silicates are projected as promising solid electrolytes for solid-state high-temperature lithium batteries. Synthesis of Li_1−x Sm_1+x SiO₄ (x = 0.2 to 0.6) was carried using sol–gel method, and these compounds were characterized by thermogravimetry differential thermal analysis, X-ray diffraction, Fourier transform infrared, and SEM. Impedance measurements were carried out at different temperatures, and conductivity at different temperatures was calculated. The effect of an increase of samarium content on the conductivity of the solid electrolyte was studied in this paper. It was found that less samarium content exhibits good conductivity at higher temperatures.     

Magnetic properties of the ordered and disordered double perovskite Sr<Subscript>2</Subscript>Fe<Subscript>1+x</Subscript>Mo<Subscript>1−x</Subscript>O<Subscript>6</Subscript> (−1 ≤ x ≤ 1/3)

We have studied the effect of cationic disorder on the spin polarization of the double perovskite system Sr₂Fe_1+x Mo_1−x O₆ with  −1 ≤ x ≤ 1/3. The composition x = 0 corresponds to the well-known double-perovskite Sr₂FeMoO₆, which is expected to have complete spin polarization, however all samples present some degree of Fe/Mo disorder which reduces the tunneling magnetoresistance in granular samples. We consider an electronic model within the renormalized perturbation expansion Green’s functions, consisting in a correlated electron picture with localized Fe-ions and itinerant electrons interacting with the local spins via a double-exchange type mechanism. Our results show the influence of disorder on the density of states and the ground-state properties, particularly on the spin polarization over the whole range of x.     

Effect of Sr<Superscript>2+</Superscript> ion substitution with trivalent ions (Sc<Superscript>3+</Superscript>, In<Superscript>3+</Superscript>, La<Superscript>3+</Superscript>, Bi<Superscript>3+</Superscript>) on its ferroelectric instability in SrTiO<Subscript>3</Subscript>

The vibration frequencies of unstable ferroelectric and antiferrodistortion modes and the dependences of the energy on the ion displacement amplitude have been calculated within the generalized Gordon-Kim model for distortions along eigenvectors of these modes in the mixed compounds Sr_{1 − x} A _x Ti_{1 − x} /₄□ _x/4O₃ and Sr_{1 − y} A _2y /₃□ _y/3TiO₃ (A = Sc³⁺, In³⁺, La³⁺, Bi³⁺; □ is the vacancy). To compensate an excess positive charge, vacancies are introduced into the Ti⁴⁺ or Sr²⁺ site. Calculations have been performed in the “daverage” crystal approximation for impurity concentrations of 0.25 and 0.50. To this end, a set of 40 atomic superlattices with various orderings of heterovalent ions Sr²⁺ and impurity A ³⁺ has been considered. It has been found that each impurity type, independently of charge balance, induces ferroelectric instabilities in doped compounds. In the case of doping with In³⁺ and La³⁺ for concentration x = 0.25, the possibility of rotating the polarization vector has been shown.     

Thermal stability and electrical conductivity of multiferroics BiFeO<Subscript>3</Subscript>/REEs

Ceramic samples of bismuth ferrite and solid solutions of Bi_{1 − x} A _x FeO₃ type (where A = Lu, Yb, Tm, Er, Ho, Dy, Tb, Gb, Eu, Sm, Nd, Pr, La; 0.05 ≤ x ≤ 0.20; Δx = 0.05) were prepared. Spectra of the real part of electrical conductivity were studied within the range 10⁻⁴–10⁻⁶ Hz. The dependence of the samples’ thermal stability and electrical conductivity on the size of the substituting ions was established.     

Dielectric and polar order behaviors of BaTiO<Subscript>3</Subscript>-Bi(Mg<Subscript>1/2</Subscript>Ti<Subscript>1/2</Subscript>)O<Subscript>3</Subscript> ceramics

New perovskite solid solution ceramics of (1−x)BaTiO₃-xBi(Mg_1/2Ti_1/2)O₃ ((1−x)BT-xBMT, x≤0.09) were synthesized by the solid-state reaction technique. X-ray diffraction studies have revealed a stable single perovskite structure for all samples. Dielectric measurements were carried out at different frequencies and temperatures. The polarization evolutions with temperatures were measured to investigate the ferroelectric properties. All the compositions show features of ferroelectrics with diffuse phase transition, though the temperature T _m of their dielectric constant maximum ε _m is frequency dependent. The dielectric constant peak ε(T) of (1−x)BT-xBMT ceramics become broad with increasing BMT content. During the temperature range of ε(T) peak summit, (1−x)BT-xBMT ceramics present quasi-linear dielectric phenomenon under high electric field with very high dielectric constant.     

Impedance spectroscopy study of Pb<Subscript>2</Subscript>P<Subscript>2</Subscript>O<Subscript>7</Subscript> compound

The lead pyrophosphate, Pb₂P₂O₇, compound was prepared by conventional solid-state reaction and identified by X-ray powder diffractometer. Pb₂P₂O₇ has a triclinic structure whose electrical properties were studied using impedance spectroscopy technique. Both impedance and modulus analysis exhibit the grain and grain boundary contribution to the electrical response of the sample. The temperature dependence of the bulk and grain boundary conductivity were found to obey the Arrhenius law with activation energies E _g = 0.66 eV and E _gb = 0.67 eV, respectively. The scaling behavior of the imaginary part of the complex impedance suggests that the relaxation describes the same mechanism at various temperatures.     

Spectroscopic properties of Nd<Superscript>3+</Superscript>:CaNb<Subscript>2</Subscript>O<Subscript>6</Subscript> crystal

The absorption spectra, fluorescence spectrum and fluorescence decay curve of Nd³⁺ ions in CaNb₂O₆ crystal were measured at room temperature. The peak absorption cross section was calculated to be 6.202×10⁻²⁰ cm² with a broad FWHM of 7 nm at 808 nm for E//a light polarization. The spectroscopic parameters of Nd³⁺ ions in CaNb₂O₆ crystal have been investigated based on Judd-Ofelt theory. The parameters of the line strengths Ω _t are Ω ₂=5.321×10⁻²⁰ cm²,Ω ₄=1.734×10⁻²⁰ cm²,Ω ₆=2.889×10⁻²⁰ cm². The radiative lifetime, the fluorescence lifetime and the quantum efficiency are 167 μs, 152 μs and 91%, respectively. The fluorescence branch ratios are calculated to be β ₁=36.03%,β ₂=52.29%,β ₃=11.15%,β ₄=0.533%. The emission cross section at 1062 nm is 9.87×10⁻²⁰ cm².     

Structure,thermal properties,conductivity and electrochemical stability of di-urethanesil hybrids doped with LiCF<Subscript>3</Subscript>SO<Subscript>3</Subscript>

Variable chain length di-urethane cross-linked poly(oxyethylene) (POE)/siloxane hybrid networks were prepared by application of a sol-gel strategy. These materials, designated as di-urethanesils (represented as d-Ut(Y′), where Y′ indicates the average molecular weight of the polymer segment), were doped with lithium triflate (LiCF₃SO₃). The two host hybrid matrices used, d-Ut(300) and d-Ut(600), incorporate POE chains with approximately 6 and 13 (OCH₂CH₂) repeat units, respectively. All the samples studied, with compositions ∞ > n ≥ 1 (where n is the molar ratio of (OCH₂CH₂) repeat units per Li⁺), are entirely amorphous. The di-urethanesils are thermally stable up to at least 200 °C. At room temperature the conductivity maxima of the d-Ut(300)- and d-Ut(600)-based di-urethanesil families are located at n = 1 (approximately 2.0 × 10⁻⁶ and 7.4 × 10⁻⁵ Scm⁻¹, respectively). At about 100 °C, both these samples also exhibit the highest conductivity of the two electrolyte systems (approximately 1.6 × 10⁻⁴ and 1.0 × 10⁻³ Scm⁻¹, respectively). The d-Ut(600)-based xerogel with n = 1 displays excellent redox stability.     

Electrical and electrochemical behaviour of several LiFe<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>Co<Subscript>1 − <Emphasis Type="Italic">x</Emphasis></Subscript>PO<Subscript>4</Subscript> solid solutions as cathode materials for lithium ion batteries

Several olivine phosphates were investigated in the last years as cathode materials for secondary lithium ion batteries. Among these compounds, LiFe _x Co_1 − x PO₄ solid solutions might be interesting candidates because they should combine the high potential value of Co³⁺/Co²⁺ (higher than 4.5 V vs Li⁺/Li) with the relatively high charge–discharge rate of LiFePO₄. Solid solutions were prepared by solid-state route and characterised by X-ray powder diffraction, cyclic voltammetry, impedance spectroscopy and the Hebb–Wagner method. The results show that also low amount of iron induces high electronic conductivity in the solid solutions.     

Fast ionic conduction in cubic hafnium garnet Li<Subscript>7</Subscript>La<Subscript>3</Subscript>Hf<Subscript>2</Subscript>O<Subscript>12</Subscript>

A new member of the family of garnets with fast lithium ion conduction has been found with the composition Li₇La₃Hf₂O₁₂. The anion arrangement corresponds to the oxygen framework in garnets, e.g., in Ca₃Fe₂Si₃O₁₂. Hafnium is coordinated octahedrally while the lanthanum environment can be described as a distorted cube. Lithium occupies a large number of positions with tetrahedral, trigonal planar, and metaprismatic coordination. Li₇La₃Hf₂O₁₂ shows a lithium bulk ion conductivity of 2.4 × 10⁻⁴ Ω⁻¹ cm⁻¹ at room temperature with an activation energy of 0.29 eV.     

Effects of dopant on the electrochemical properties of Li<Subscript>4</Subscript>Ti<Subscript>5</Subscript>O<Subscript>12</Subscript> anode materials

The effects of dopant on the electrochemical properties of spinel-type Li_3.97M_0.1Ti_4.94O₁₂ (M = Mn, Ni, Co) and Li_(4-x/3)Cr_xTi_(5-2x/3)O₁₂(x = 0.1, 0.3, 0.6, 0.9, 1.5) were systematically investigated. Charge-discharge cycling were performed at a constant current density of 0.5 mA/cm² between the cut-off voltages of 3.0 and 1.0 V, the experimental results showed that Cr³⁺ dopant improved the reversible capacity and cycling stability over the pristine Li₄Ti₅O₁₂. The substitution of the Mn³⁺ and Ni³⁺ slightly decreased the capacity of the Li₄Ti₅O₁₂. Dopants such as Co³⁺ to some extent worsened the electrochemical performance of the Li₄Ti₅O₁₂.     

Exciton absorption spectra of Cs<Subscript>2</Subscript>CdI<Subscript>4</Subscript> and Rb<Subscript>2</Subscript>CdI<Subscript>4</Subscript> ferroelastic solid solutions

The exciton absorption spectra of thin films of (Cs_{1 − x} Rb _x )₂CdI₄ solid solutions have been investigated and the refractive index n(λ) in their transparency window in the concentration range of 0 ≤ x ≤ 1 has been measured. The exciton-band parameters and optical permittivity ɛ_∞(x) have been found to linearly depend on the concentration. It is established that excitons are incorporated into the CdI₂ sublattice of the solid solutions and belong to intermediate-coupling ones. The characteristics of excitons in ferroelastics are compared with the corresponding parameters for CdI₂, RbI, and CsI, which are used as components to synthesize ternary compounds.     

Lattice dynamics of Eu<Subscript>1-x</Subscript>Y<Subscript>x</Subscript>MnO<Subscript>3</Subscript> (0 ≤ x ≤ 0.5)

A systematic and detailed study of Raman and infrared active lattice excitations in the orthorhombic multiferroic manganite Eu_1−xY_xMnO₃ (0 ≤ x ≤ 0.5) was carried out at room temperature. For the infrared active phonon modes the eigenfrequencies, damping constants and oscillator strengths were analyzed by Fourier-Transform Infrared Spectroscopy in the far infrared frequency range. For the Raman active phonons the same analysis for eigenfrequencies and damping constants was carried out using Raman spectroscopy in the range from 200 cm⁻¹ to 700 cm⁻¹. Y doping leads to mode-dependent phonon frequency shifts up to 8%. These are interpreted in terms of the interplay between the decrease of the reduced ion masses and the axis-dependent change of bond lengths. The latter leads to a bond softening along the a-axis and a strengthening along the c-axis, for which the highest phonon frequency increase is observed. The application of both Raman and Infrared Spectroscopy gives us sensitivity not only to symmetry properties via the selection rules but also to the involvement of different ion types within the unit cell. It is clearly shown that the disorder induced effects are of minor impact on the lattice properties and solely detected on the rare earth sites. The MnO₆ octahedra remain unaffected and show the same behavior as in the stochiometric RMnO₃ making Eu_1−xY_xMnO₃ an excellent model system for a quasi-continuous fine-tuning of the lattice parameters relevant for the appearance of multiferroicity.     

The NASICON solid solution Li1−x La x /3Zr2(PO4)3: optimization of the sintering process and ionic conductivity measurements

The Li_1−x La _{x /3}Zr₂(PO₄)₃ NASICON-type compounds (0 ≤ x ≤ 1) have been synthesized in powder form by a sol-gel method and sintered for ionic conductivity measurements. In order to improve the compactness of the ceramic without decomposition of the compound, several sintering processes have been tested for one member of the solid solution (x = 0.6): the use of sintering aids (ZnO, B₂O₃, TiO₂ and LiNO₃), a ball-milling of the synthesized powder, a flash heating, high isostatic pressure, and spark plasma sintering. Finally, a satisfactory compactness of 85% is obtained compared to the referenced value (63%) obtained by uniaxial and isostatic pressing. The ionic conductivity study was performed by impedance spectroscopy. It shows that, despite the formation of vacancies, the substitution Li⁺→ 1/3 La³⁺ + 2/3 □ has unfortunately no influence on the conduction for 0 ≤ x ≤ 0.7 since the ionic conductivity remains identical to the LiZr₂(PO₄)₃ one. For higher x values, the ionic conductivity strongly decreases.     

The mechanism of formation of the hydroperoxyl radical in the CF<Subscript>3</Subscript>COOH + <Superscript>3</Superscript>O<Subscript>2</Subscript> system: a quantum-chemical study

Ab initio quantum-chemical calculations of the (CF₃CO₂H₂⁺…³O₂) and (CF₃CO₂⁻…³O₂) complexes were performed by the MP2 method. It was found that these complexes were characterized by low complex formation energies, of 2.97 and 1.72 kcal/mol, respectively. According to the MP2(full)/6-311++G(d, p) calculation data, the bridge stabilization of oxygen by linking with both the CF₃CO₂H₂⁺ cation and CF₃CO₂⁻ anion is much more favorable energetically. A study of the potential energy surface of the joint molecular system (CF₃CO₂H₂⁺…³O₂…CF₃CO₂⁻) shows that proton experiences activationless transfer from the cation to the ³O₂ molecule accompanied by electron transfer from the CF₃COO⁻ anion. An analysis of spin density distribution shows that two radicals are stabilized in the (CF₃CO₂….OOH….O=C(OH)CF₃) complex in the triplet state observed on the potential energy surface.     

Electrical characterization of the [N(CH<Subscript>3</Subscript>)<Subscript>4</Subscript>][N(C<Subscript>2</Subscript>H<Subscript>5</Subscript>)<Subscript>4</Subscript>]ZnCl<Subscript>4</Subscript> compound

The [N(CH₃)₄][N(C₂H₅)₄]ZnCl₄ compound has been synthesized by a solution-based chemical method. The X-ray diffraction study at room temperature revealed an orthorhombic system with P2₁2₁2 space group. The complex impedance has been investigated in the temperature and frequency ranges 420–520 K and 200 Hz–5 MHz, respectively. The grain interior and grain boundary contribution to the electrical response in the material have been identified. Dielectric data were analyzed using the complex electrical modulus M ^* for the sample at various temperature. The modulus plots can be characterized by full width at half height or in terms of a non-exponential decay function ϕ(t) = exp[(−t/τ) ^β ]. The detailed conductivity study indicated that the electrical conduction in the material is a thermally activated process. The variation of the AC conductivity with frequency at different temperatures obeys the Almond and West universal law.     

Ionic conductivity and structural properties of MnO-doped Bi4V2O11 system

Bi₄V₂O₁₁ exists in three phases viz. α, β, and γ. High temperature γ-phase can be stabilized to room temperature owing to its higher conductivity by the partial substitution of metallic cations for vanadium in Bi₄V₂O₁₁. Phase transitions from α → β and β → γ are composition and temperature-dependent. Mn²⁺-doped compounds Bi₄V_2−x Mn _x O_{11− δ} (0 ≤ x ≤ 0.4) have been synthesized by solid state reaction technique and investigated by X-ray diffraction and ionic conductivity measurement. High ionic conducting γ-phase is stabilized for x ≥ 0.2. The ionic conductivity of the series of Bi₄V_2−x Mn _x O_{11− δ} samples has been measured by using ac impedance spectroscopy technique. The conductivity data do show departure from its simple Arrhenius behavior for all of the compositions. The highest conductivity observed for x = 0.2 sample can be attributed to lower activation energy.     

Optical properties of nonlinear solid solution GaSe<Subscript>1-<Emphasis Type="Italic">x</Emphasis></Subscript>S<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript> (0 < <Emphasis Type="Italic">x</Emphasis> ≤ 0.4) crystals

Transmission spectra and phase matching conditions for second harmonic generation in GaSe_1–x S _x (0 < x ≤ 0.4) solid solution crystals are experimentally investigated. An algorithm is suggested and dispersion equations are derived that allow the phase matching angles describing best the available experimental data to be estimated as a function of the mixing ratio x. Translated from Izvestiya Vysshikh Uchebnykh Zavedenii, Fizika, No. 10, pp. 80–85, October, 2008.     

Effect of composition disorder on the electron paramagnetic resonance spectrum of the thermally populated excited state of Er<Superscript>3+</Superscript> ions in YLuAG mixed garnets

The results of investigation of electron paramagnetic resonance of Er³⁺ ions in the thermally populated first excited state in (Y_{1 − x} Lu _x )₃Al₅O₁₂ (YLuAG) mixed yttrium-lutetium garnet single crystals (0 ≤ x ≤ 1) are considered. In composition-disordered YLuAG, a number of new (as compared to Y₃Al₅O₁₂ (YAG)) Er³⁺ paramagnetic centers are detected; these centers appear due to a change in the crystal field symmetry and magnitude upon isomorphic substitution of Lu³⁺ for Y³⁺ in the yttrium sublattice of garnets. The origin of new paramagnetic centers is established and their formation probability is calculated.     

DO<Subscript>3</Subscript>-type cubic structure of nonstoichiometric vanadium monoxide

An X-ray diffraction study indicates that nonstoichiometric vanadium monoxide VO _y ≡ V _x O _z (y = z/x) has a cubic structure of the DO₃ type (space group Fm $ \bar 3 $ \bar 3 m), where vanadium atoms are not only at the 4(a) sites of the metal fcc sublattice, but also at the tetrahedral 8(c) sites. This circumstance fundamentally distinguishes monoxide VO _y from strongly nonstoichiometric MX _y compounds with the B1 structure and the same space group, where atoms M and X and structural vacancies ▪ and ▭ of the metal and nonmetal sublattices, respectively, are distributed over the 4(a) and 4(b) sites. The dependence of the filling factor q of the tetrahedral interstices by vanadium atoms on the relative content y of oxygen in VO _y has been obtained. It has been shown that the composition of cubic vanadium monoxide should be represented as VO _y ≡ V _x O _z ≡ V _{x − 2q} V_2q ^(t)▪_{1 − x + 2q} O _z ▭_{1 − z} , taking into account the structure.