DNA analysis of a radiotolerant bacterium Pantoea agglomerans by FT-IR spectroscopy

A radiation tolerance strain, Pantoea agglomerans was isolated from γ-irradiated carrot samples (Daucus carota). D₁₀ determination showed that the radioresistance of this bacterium is five-fold higher than Escherichia coli, both belonging to the family of Enterobacteriaceae. DNA isolated from untreated and irradiated bacterial cells was analyzed by FT-IR spectroscopy to investigate the radiotolerance of this bacterium. At doses <5 kGy, an alteration of the interbase hydrogen networks was observed and characterized mainly by an increase of bands assigned to the carbonyl non-pairing and the free amine groups. Moderate breakage of the DNA backbone and damage of the osidic structure were also observed. Similar spectral profiles were noticed at doses ≥5 kGy, but additional increase of the band intensity of CC and CN suggests damages of nucleobases. High number of asymmetric PO₂⁻ and upper shift of symmetric PO₂⁻ are indicative of DNA strand breaks. Osidic damages were evidenced by decrease of the absorption bands ascribed to deoxyribosyl moieties and by appearance of C–OH band. DNA degradation at high irradiation doses was also noticed by electrophoresis using agarose gel. It appeared that DNA underwent covalent cross-linking, as revealed by agglomeration of DNA in the wells of agarose gel.     

Specific adsorption of halogen anions on hydrous γ-Al2O3

The paper reports results of a study on the specific adsorption of F⁻, Cl⁻, Br⁻, I⁻, ClO₃⁻, BrO₃⁻, IO₃⁻ and IO₄⁻ on hydrous γ-Al₂O₃. The isotherms of the anion adsorption and the adsorption dependencies on pH and the ionic strength of the solution have been determined under the equilibrium conditions. According to the degree of affinity to γ-Al₂O₃, the anions can be ordered as: I⁻3⁻−−3⁻3⁻4⁻−. It has been established that the sorption of IO₄⁻ and F⁻ involves the formation of surface complexes in the inner co-ordination sphere, whereas that of Cl⁻, Br⁻, I⁻, ClO₃⁻, BrO₃⁻ and IO₃⁻ takes place through formation of ion pair complexes in the outer co-ordination sphere. In the dynamic system, the exchange isoplanes and elution curves have been determined for selected anions on columns filled with Al₂O₃. It has been shown that γ-Al₂O₃ can be used for isolation and concentration of IO₃⁻ from natural waters in order to decrease the limit of the ions determination to 2 μg l⁻¹. Using differential pulse voltammetry (DPV), after isolation and concentration on γ-Al₂O₃, the content of iodates has been determined in mineral, marine and tap water doped with these ions.     

Electron beam induced decomposition of chlorinated aromatic compounds in waste incinerator offgas

Gaseous emissions of polychlorinated dibenzo-dioxins and -furanes (PCDD/F) in incinerator flue gas are decomposed to below 0,1 ng m_N⁻³ by the irradiation with accelerated electrons. A mobile off gas cleaning plant (AGATE-M), equipped with a 200 keV electron accelerator (EB), was used to treat a flow of 1000 m_N³ h⁻¹ of flue gas from a waste incinerator. Very high decomposition efficiencies were obtained at a dose of 5 – 10 kGy. A computer model (AGATE-code) was developed to analyze the gas phase chemistry of the process. The experimental and the theoretical results are reported and compared.     

Hybrid polymerization of iso-butyl vinyl ether

The radiation-induced hybrid polymerization in the presence of the N-alkoxypyridinium salt having relatively stable nonnucleophilic anion (PF₆⁻) has been investigated in the paper. Based on the analysis of experimental data and the GPC spectrum, the onium salts not only oxidize -alkoxyalkyl radicals, produced from IBVE in dichloromethane by irradiation, to the corresponding cations, but also give nonnucleophilic anions PF₆⁻ for the polymerization system. The experimental results clearly demonstrate that free radical and cationic polymerization mechanisms occurred simultaneously in IBVE/EMP⁺PF₆⁻/CH₂Cl₂ systems on irradiation with γ-ray.     

Effect of dose rate on inactivation of microorganisms in spices by electron-beams and gamma-rays irradiation

Total aerobic bacteria in spices used in this study were determined to be 1 × 10⁶ to 6 × 10⁷ per gram. A study on the inactivation of microorganisms in spices showed that doses of 6–9kGy of EB (electron-beams) or γ-irradiation were required to reduce the total aerobic bacteria in many However, a little increase of resistance was observed on the inactivation of total aerobic bacteria in many spices in case of EB irradiation. These difference of radiation sensitivities between EB and γ-rays was explained by dose rate effect on oxidation damage to microorganisms from the results of radiation sensitivities of Bacillus pumilus and B. megaterium spores at dry conditions. On the other hand, these high dose rate of EB irradiation suppressed the increase of peroxide values in spices at high dose irradiation up to 80 kGy. However, components of essential oils in spices were not changed even irradiated up to 50 kGy with EB and γ-rays.     

Dose response of A-type carbonated apatites prepared under different conditions

Irradiated A-type carbonated apatites with carbonate content ranging from 1.45% to 4.84% are studied by using electron paramagnetic resonance (EPR). The EPR spectra are mainly constituted of lines associated to axial CO₂⁻ species (g=2.0028 and g=1.9973) and orthorhombic CO₃⁻ species (g₁=2.0170, g₂=2.0090 and g₃=2.0041). The production of CO₂⁻ species on gamma irradiation depends on the carbonate concentration and the hydroxyapatite stoichiometry. The lowest dose detection limit was achieved with stoichiometric samples and carbonate concentration of 3.7%.     

Spectrophotometric determination of nitrate and nitrite in soil and water samples with a diazotizable aromatic amine and coupling agent using column preconcentration on naphthalene supported with ion-pair of tetradecyldimethylbenzylammonium and iodide

Composite diazotization-coupling reagents containing sulfanilamide (SAM), sulfapyridine (SP) or sulfathiazole (ST) as the diazotizable aromatic amines and sodium 1-naphthol-4-sulfonate (NS) as the coupling agent using column preconcentration on naphthalene-tetradecyldimethylbenzylammonium(TDBA)-iodide adsorbent have been used for the spectrometric determination of trace nitrate and nitrite in soil and water samples. Nitrite ion reacts with SAM in the pH range 2.0–5.0, SP in the pH range 2.0–2.5 and ST in the pH range 2.0–3.3 in HCl medium to form water-soluble colourless diazonium cations. These cations were coupled with NS in the pH range 9.0–12.0 for the SAM system, 9.6–12.0 for the SP system and 8.5–12.0 for the ST system to be retained on naphthalene-TDBA-I material packed in a column. The solid mass is dissolved from the column with 5 ml of dimethylformamide and the absorbance is measured spectrometerically at 543 nm for SAM-NS, 533 nm for SP-NS and 535 nm for ST-NS. Nitrate is reduced to nitrite by a copper-coated cadmium reductor column and the nitrite is then treated with the diazotization-coupling reagent by column preconcentration. The absorbance due to the sum of nitrate and nitrite is measured and nitrate is determined by difference. The calibration graph was linear over the range 2–40 ng NO₂⁻-N ml⁻¹ and 1.5–30 ng NO₃⁻-N ml⁻¹ in aqueous samples for the SAM and ST systems and 2–48 ng NO₂⁻-N ml⁻¹ and 1.5–36 ng NO₃⁻-N ml⁻¹ in aqueous samples for the SP system, respectively. The sensitivity, accuracy and precision of the systems decreased in the order STSAMSP. The detection limits were 1.4 ng NO₂⁻-N ml⁻¹ and 1.1 ng NO₃⁻-N ml⁻¹ for SAM, 1.6 ng NO₂⁻-N ml⁻¹ and 1.2 ng NO₃⁻-N ml⁻¹ for SP, and 1.0 ng NO₂⁻-N ml⁻¹ and 0.75 ng NO₃⁻-N ml⁻¹ for ST, respectively. The preconcentration factors are 8, 5 and 6 for SAM-NS, SP-NS and ST-NS, respectively. Interferences from various foreign ions have been studied and the methods have been applied to the determination of ng ml⁻¹ levels of nitrite and nitrate in soil and water samples. The mean recovery was 95–102% for all three systems.     

Effect of γ-irradiation on cotton-cellulose

The effect of high-energy irradiation on cotton-cellulose was studied in inert atmosphere and in the presence of oxygen. A decrease in the degree of polymerization from 1200 to 330 was measured after irradiation with a dose of 15 kGy (dose rate 100 Gy/h) and further gradual decrease was measured when the dose was increased up to 100 kGy. At lower doses a slight increase in crease recovery angle was found as compared to the unirradiated sample. In the FTIR spectra of the same sample the appearance of the absorbance of carbonyl groups (band at 1730–1750 cm⁻¹) was found as a consequence of the oxidative degradation. Cracks on the surface of the fibers were observed by scanning electron microscope on samples irradiated with doses higher than 100 kGy.     

Anodic characterization of mercury microelectrodes for determinations of anions in real samples

The anodization of mercury microelectrodes was investigated in synthetic samples containing several strong and weak electrolytes at different concentrations. In particular, the effects on mercury anodization due to the presence of NaOH, HClO₄, NaCl, NaI, NaF, Na₂SO₄, NaHCO₃, Na₂CO₃, tartaric and citric acids, were studied in solutions containing either each species or mixtures of them, and without addition of supporting electrolyte. Some of the electrode processes studied led to linear calibration plots e.g. 1 × 10⁻⁵ − 1 × 10⁻⁴M Cl⁻, 1 × 10⁻⁶ − 1 × 10⁻⁵M I⁻, 5 × 10⁻⁴ − 3 × 10⁻³M SO₄²⁻, 5 × 10⁻⁴ − 2 × 10⁻²M HCO₃⁻, with typical correlation coefficients of 0.998–0.999. The anodization of mercury microelectrodes was also investigated directly in wine, rain, tap and mineral water, without pretreatment and without addition of supporting electrolyte. In the real samples only the ions Cl⁻ and HCO₃⁻ could be quantified, and the values found were in agreement, within 3–5%, with the reference values obtained by using Italian standard methods for food.     

Extraction of arsenic as the diethyl dithiophosphate complex with supercritical fluid and quantitation by cathodic stripping voltammetry

The separation of arsenic based on in situ chelation with ammonium diethyl dithiophosphate (ADDTP) has been carried out using methanol-modified supercritical CO₂. Aliquots of extract were added to an electroanalytical cell and arsenic was determined by square wave cathodic stripping voltammetry (SWCSV) at a hanging mercury drop electrode (HMDE). Quantitative extractions of As(DDTP)₃ were achieved when the experiments were carried out at a pressure of 2500 psi, a temperature of 90 °C, 2.0 mL of methanol, 20.0 min of static extraction and 5.0 min of dynamic extraction in the presence of 18 mg of ADDTP. Analysis of arsenic was made using 150 mg L⁻¹ of Cu(II) in 1 M HCl solution as supporting electrolyte in the presence of ADDTP as ligand. Preconcentration was carried out by deposition at a potential of −0.50 V and the intermetallic compound Cu_xAs_y was reduced at a potential of −0.77 to −0.82 V, depending on ligand concentration. The results showed that the presence of ligand plays an important role, increasing the method's sensitivity and preventing the oxidation of As(III). The calibration graph of the As(DDTP)₃ solution was linear from 0.8 to 12.5 μg L⁻¹ of arsenic (LOD 0.5 μg L⁻¹, R = 0.9992, t_acc = 60 s). The method was validated using carrot pulp spiked with arsenic solution. This method was applied to the determination of arsenic in samples of carrots, beets and irrigation water. Arsenic in beets was: skin 4.10 ± 0.18 mg kg⁻¹; pulp 3.83 ± 0.19 mg kg⁻¹ and juice 0.71 ± 0.09 mg L⁻¹; arsenic in carrots was: skin 2.15 ± 0.09 mg kg⁻¹; pulp 0.59 ± 0.11 mg kg⁻¹ and juice 0.71 ± 0.03 mg L⁻¹. Arsenic in water were: Chiu-Chiu 0.08 mg L⁻¹, Inacaliri 1.12 mg L⁻¹, and Salado river 0.17 ± 0.07 mg L⁻¹.     

Flow injection hydride generation electrothermal atomic absorption spectrometric determination of toxicologically relevant arsenic in urine

Analytical procedure for the determination of toxicologically relevant arsenic (the sum of arsenite, arsenate, monomethylarsonate and dimethylarsinate) in urine by flow injection hydride generation and collection of generated inorganic and methylated hydrides on an integrated platform of a transverse-heated graphite atomizer for electrothermal atomic absorption spectrometric determination (ETAAS) is elaborated. Platforms are pre-treated with 2.7 μmol of zirconium and then with 0.10 μmol of iridium which serve both as an efficient hydride sequestration medium and permanent chemical modifier. Arsine, monomethylarsine and dimethylarsine are generated from diluted urine samples (10–25-fold) in the presence of 50 mmol L⁻¹ hydrochloric acid and 70 mmol L⁻¹ l-cysteine. Collection, pyrolysis and atomization temperatures are 450, 500, 2100 and 2150 °C, respectively. The characteristic mass, characteristic concentration and limit of detection (3σ) are 39 pg, 0.078 μg L⁻¹ and 0.038 μg L⁻¹ As, respectively. The limits of detection in urine are ca. 0.4 and 1 μg L⁻¹ with 10- and 25-fold dilutions. The sample throughput rate is 25 h⁻¹. Applications to several urine CRMs are given.     

Calorimetric study of the adducts CdBr2·nL (n = 1 and 2; L = ethyleneurea and propyleneurea)

A calorimetric study was performed for adducts of general formula CdBr₂·nL (n=1 and 2; L=ethyleneurea (eu) and propyleneurea (pu)). The standard molar reaction enthalpy in condensed phase: CdBr₂(c)+nL(c)=CdBr₂·nL(c); Δ_rH_m^θ, were obtained by reaction–solution calorimetry, to give the following values for mono- and bis-adducts: −19.54 and −34.59; −7.77 and −19.05 kJ mol⁻¹ for eu and pu adducts, respectively. Decomposition (Δ_DH_m^θ) and lattice (Δ_MH_m^θ) enthalpies, as well as the mean cadmium---oxygen bond dissociation enthalpy, DCd---O, were calculated for all adducts.     

Use of the dichromate solution as a dosimeter for high dose and high dose rate

The radiolytic reduction of Cr(VI) in N₂O-saturated aqueous solutions has been investigated over a large range of pH by steady state radiolysis. At pH 3 in the presence of formate as scavenger for ·OH, G(−Cr(VI)) is higher than the expected yield and a strong dose rate effect is observed. The solution cannot be used for dosimetry at this pH. The proposed mechanism to explain the enhanced response and the dose rate dependence involves the reduction of the unstable radiolytically produced Cr(IV) by HCO₂⁻. At pH 9.2 the reaction between Cr(IV) and formate is absent and no dose rate effect was observed up to 70 kGy min⁻¹, which makes this system particularly attractive as a dosimeter in the 0.1–10 kGy dose range. Radiation chemical aspects relating to the use of this system as a high-dose and high-dose rate chemical dosimeter are discussed.     

Hydrogen peroxide in basic media for whole blood sample dissolution for determination of its lead content by electrothermal atomization atomic absorption spectrometry

Hydrogen peroxide in basic media is proposed as a means for dissolving whole blood samples to be analyzed by electrothermal atomization atomic absorption spectrometry, ET AAS. Approximately 2 g of the whole blood sample were directly weighed in a 150 mL volumetric flask; 3 mL of a NaOH 0.2 mol L⁻¹ solution, two drops of 1-octanol, as an antifoaming agent, and 1 mL of 30% volume hydrogen peroxide were added to the flask to promote oxidation. The solution was then manually shaken and after approximately three minutes of shaking, a clear solution, with no apparent suspended solids or greasy layers, was obtained. Distilled-deionized water was used to complete the volume. Ten μL of the resulting solution along with 10 μL of a solution containing 5000 mg L⁻¹ of NH₄H₂PO₄ and 300 mg L⁻¹ of Mg(NO₃)₂ as a modifier, were injected into transversely heated graphite tubes for lead determination. Both aqueous standards and standard addition calibration curves produced results not significantly different at a 95% confidence limit level. Accuracy of the measurements was assessed by analysis of the IAEA A-13 (concentration of trace and minor elements in freeze dried animal blood) standard reference material containing 0.18 mg L⁻¹ lead on a dry basis and by means of recovery tests. Analysis of the IAEA A-13 standard produced 0.17 ± 0.02 mg L⁻¹ lead on a dry basis; recovery tests afforded values from 95 to 105%. Ten consecutive measurements of a 5 ppb lead solution gave a characteristic mass of 47.2 pg and a (3S) detection limit of 1.77 μg L⁻¹ Pb. Results obtained from analysis of whole blood samples of volunteer donors covered a lead concentration range between 8 and 21 μg L⁻¹ with a mean value of 11.9 ± 4.7 μg L⁻¹.     

Structures of propionaldehyde, butyraldehyde, and pivalaldehyde complexes of the chiral rhenium fragment [(η-C5H5)Re(NO)(PPh3)]

The crystal structures of propionaldehyde complex (RS,SR)-(η⁵-C₅H₅)Re(NO)(PPh₃)(η²-O=CHCH₂CH₃)]⁺ PF₆⁻ (1b⁺ PF₆^s−; monoclinic, P2₁/c (No. 14), a = 10.166 (1) Å, b = 18.316(1) Å, c = 14.872(2) Å, β = 100.51(1)°, Z = 4) and butyraldehyde complex (RS,SR)-[(η⁵-C₅H₅)Re(NO)(PPh₃)(η²-O=CHCH₂CH₂CH₃)]⁺ PF₆⁻ (1c⁺PF₆⁻; monoclinic, P2₁/a (No. 14), a = 14.851(1) Å, b = 18.623(3) Å, c = 10.026(2) Å, β = 102.95(1)°, Z = 4) have been determined at 22°C and −125°C, respectively. These exhibit C O bond lengths (1.35(1), 1.338(5) Å) that are intermediate between those of propionaldehyde (1.209(4) Å) and 1-propanol (1.41 Å). Other geometric features are analyzed. Reaction of [(η⁵-C₅H₅)Re(NO)(PPh₃)(ClCH₂Cl)]⁺ BF₄⁻ and pivalaldehyde gives [(η⁵-C₅H₅)Re(NO)(PPh₃)(η²-O=CHC(CH₃)₃)]⁺BF₄⁻ (81%), the spectroscopic properties of which establish a π C O binding mode.     

Spectres infrarouges et structure des anions 2-methylallyle, CH3-C(CH2)2- et triméthylèneméthane, C(CH2)3

The infrared spectra of solid samples of C₄H₇K and C₄D₇K have been investigated in the 4000 to 30 cm⁻¹ range. A complete assignment of intramolecular fundamentals of C₄H₇⁻ and C₄D₇⁻ ions and of potassium-allyl vibrations is proposed and the intramolecular force constants are calculated. The C(CH₂)₃²⁻ anion has been identified spectroscopically. Structures of C₃H₅⁻, C₄H₇⁻ and C(CH₃)₃²⁻ are discussed and compared with those optimised by the MINDO/3 method.     

Determination of organochlorine pesticides in ground water samples using solid-phase microextraction by gas chromatography-electron capture detection

A direct immersion solid-phase microextraction coupled with gas chromatography-electron capture detection (SPME-GC-ECD) method was optimized and validated for the quantitative determination of 18 organochlorine pesticides in ground water. Ionic strength, stirring speed, adsorption and desorption time and pH were some of the parameters investigated in order to select the optimum conditions for SPME with a 50/30 DVB/CAR/PDMS fiber coating. The SPME-GC/ECD method showed good linear response below 10 ng L⁻¹ with R² values in the range of 0.9950–0.9997. The repeatability of the measurements were lower than 10%. Values of relative recoveries located within the acceptable range (80–120%). Limits of quantification (LOQ) from 4.5 × 10⁻³ to 1.5 ng L⁻¹ were obtained. On average 8 organochlorines were found per sample, even so all the 18 organochlorines were quantified among them. Substances such as endrin ketone, γ-BHC and β-BHC were the pesticides determined in larger concentration (0.06–305 ng L⁻¹), while methoxychlor and aldrin in smaller amounts (0.151–1.55 ng L⁻¹). Measured levels of organochlorine pesticides were above the limits established by Brazilian regulations.     

Determination of nanomolar concentrations of phosphate in freshwaters using flow injection with luminol chemiluminescence detection

A simple and rapid flow injection (FI) method is reported for the determination of phosphate (as molybdate reactive P) in freshwaters based on luminol chemiluminescence (CL) detection. The molybdophosphoric heteropoly acid formed by phosphate and ammonium molybdate in acidic conditions generated chemiluminescence emission via the oxidation of luminol. The detection limit (3× standard deviation of blank) was 0.03 μg P l⁻¹ (1.0 nM), with a sample throughput of 180 h⁻¹. The calibration graph was linear over the range 0.032–3.26 μg P l⁻¹ (r²=0.9880) with relative standard deviations (n=4) in the range 1.2–4.7%. Interfering cations (Ca(II), Mg(II), Ni(II), Zn(II), Cu(II), Co(II), Fe(II) and Fe(III)) were removed by passing the sample through an in-line iminodiacetate chelating column. Silicate interference (at 5 mg Si l⁻¹) was effectively masked by the addition of tartaric acid and other common anions (Cl⁻, SO₄²⁻, HCO₃⁻, NO₃⁻ and NO₂⁻) did not interfere at their maximum admissible concentrations in freshwaters. The method was applied to freshwater samples and the results (26.1±1.1–62.0±0.4 μg P l⁻¹) were not significantly different (P=0.05) from results obtained using a segmented flow analyser method with spectrophotometric detection (24.4±4.45–84.0±16.0 μg P l⁻¹).     

Application of the extended DLVO theory—the stability of alatrofloxacin mesylate solutions

Electrophoretic mobility and contact angle measurements have been made on alatrofloxacin mesylate and its formulations which were protected from or exposed to light, and its degradation product compound (F). In aqueous solution, the light-protected alatrofloxacin mesylate had a zeta-potential of +19 mV, a negligible electron-acceptor (γ_i⁺) surface tension parameter and an electron-donor surface tension parameter γ_i⁻=32.5 mJ m⁻², which was higher than that of water. This caused the particles to be very hydrophilic and to form very stable suspensions in aqueous solution due, mainly, to a net Lewis acid–base (polar) repulsion. After the suspensions were exposed to light, the zeta-potential of the degradation product increassed to +37.8 mV, but the electron-donor surface tension parameter decreased to γ_i⁻=8 mJ m⁻², making the molecules or particles very hydrophobic and causing them to flocculate. The energies of attraction in the latter case were mainly hydrophobic (90%) with about 10% resulting from van der Waals forces.     

Determination of dioxopromethazine hydrochloride by capillary electrophoresis with electrochemiluminescence detection

The paper presents a rapid method for the determination of dioxopromethazine hydrochloride (DPZ), an antihistamine drug, by the capillary electrophoresis with electrochemiluminescene detection (CE–ECL) using tris(2,2′-bipyridyl)ruthenium(II) (Ru(bpy)₃²⁺) reagent. This CE–ECL detection method has high sensitivity, good selectivity and reproducibility for DPZ analysis. Under the optimized conditions: separation capillary, 38 cm length (25 μm i.d.); sample injection, 10 s at 8 kV; separation voltage, 12.5 kV; running buffer, 20 mmol L⁻¹ sodium phosphate of pH 6.0; detection potential, 1.15 V; 50 mmol L⁻¹ of phosphate buffer (pH 7.14) containing 5 mmol L⁻¹ of Ru(bpy)₃²⁺ in ECL detection cell, the detection limit of DPZ was 0.05 μmol L⁻¹ (S/N = 3). The linear range extended from 5 to 100 μmol L⁻¹. The linear curve obtained was Y = 181.62 + 9.28X with a correlation coefficient of 0.9970. The relative standard deviations of the ECL intensity and the migration time for six continuous injections of 5 μmol L⁻¹ DPZ were 3.7% and 0.92%, respectively. The CE–ECL method was applied to analyze DPZ in real samples including tablets, rat serum and human urine, and satisfactory results were obtained without interference from samples matrix. The CE–ECL technique was proved to be a potential method for the detection of DPZ in clinic analysis.