Standard molar enthalpies of formation of 2-furancarbonitrile, 2-acetylfuran,and 3-furaldehyde

The standard (p^° = 0.1 MPa) molar energies of combustion of 2-furancarbonitrile, 2-acetylfuran, and 3-furaldehyde were measured by static bomb combustion calorimetry; the Calvet high-temperature microcalorimetry was used to measure the enthalpies of vaporization of these liquid compounds. The standard molar enthalpies of formation of the three compounds, in the gaseous phase, at T = 298.15 K, have been derived from the corresponding standard molar enthalpies of formation in the liquid phase and the standard molar enthalpies of phase transition, as (106.8 ± 1.1) kJ · mol^?1, ?(207.4 ± 1.3) kJ · mol^?1, and ?(151.9 ± 1.1) kJ · mol^?1, for 2-furancarbonitrile, 2-acetylfuran, and 3-furaldehyde, respectively.Standard molar enthalpies of formation are discussed in terms of the isomerization ortho meta. Enthalpic increment values of the introduction of the functional groups –CN, –CHO, and –COCH₃ were also compared with some other heterocycles; i.e. thiophene and pyridine.     

When theory and experiment hold hands: The thermochemistry of γ-pyrone derivatives

In this work, we have determined the experimental standard $(p^{°}=0.1\text{MPa})$ molar enthalpies of formation, in the gas phase, of 2,6-dimethyl-4-pyrone ?(261.5 ± 2.6) kJ · mol^?1 and 2-ethyl-3-hydroxy-4-pyrone ?(420.9 ± 2.8) kJ · mol^?1. These values were obtained by combining the standard molar enthalpy of formation in the condensed phase, derived from combustion experiments in oxygen, at T = 298.15 K, in a static bomb calorimeter, with the standard molar enthalpy of sublimation, at T = 298.15 K, obtained by Calvet microcalorimetry. Additionally, high-level density functional theory calculations using the B3LYP hybrid exchange-correlation energy functional with extended basis sets have been performed for these two compounds. Good agreement was obtained between the experimental and computational results. Using the same methodology, we calculated the standard molar enthalpy of formation of gaseous 2-methyl-3-hydroxy-4-pyrone.     

Standard molar enthalpy of formation of 1-benzosuberone: An experimental and computational study

The energetics of 1-benzosuberone was studied by a combination of calorimetric techniques and computational calculations.The standard (p° = 0.1 MPa) molar enthalpy of formation of 1-benzosuberone, in the liquid phase, was derived from the massic energy of combustion, in oxygen, at T = 298.15 K, measured by static bomb combustion calorimetry. The standard molar enthalpy of vaporization, at T = 298.15 K, was measured by Calvet microcalorimetry. From these two parameters the standard (p° = 0.1 MPa) molar enthalpy of formation, in the gaseous phase, at T = 298.15 K, was derived: ?(96.1 ± 3.4) kJ · mol^?1. The G3(MP2)//B3LYP composite method and appropriate reactions were used to computationally calculate the standard molar enthalpy of formation of 1-benzosuberone, in the gaseous phase, at T = 298.15 K. The computational results are in very good agreement with the experimental value.     

Determination of the energies of combustion and enthalpies of formation of nitrobenzenesulfonamides by rotating-bomb combustion calorimetry

The energies of combustion for 2-nitrobenzenesulfonamide (cr), 3-nitrobenzenesulfonamide (cr), and 4-nitrobenzenesulfonamide (cr) were determined using a recently described rotating-bomb combustion calorimeter. The condensed phase molar energies of combustion obtained were ?(3479.2 ± 1.0) kJ · mol^?1 for 2-nitrobenzenesulfonamide (cr), ?(3454.2 ± 1.1) kJ · mol^-1 for 3-nitrobenzenesulfonamide (cr), and ?(3450.1 ± 1.9) kJ · mol^-1 for 4-nitrobenzenesulfonamide (cr). From these combustion energy values, the standard molar enthalpies of formation in the condensed phase were obtained as: ?(341.3 ± 1.3) kJ · mol^?1, ?(366.3 ± 1.3) kJ · mol^?1, and ?(370.4 ± 2.1) kJ · mol^?1, respectively. Polyethene bags were used as an auxiliary material in the combustion experiments. The heat capacities and purities of the compounds were determined using a differential scanning calorimeter.     

Molecular energetics of 4-methyldibenzothiophene: An experimental study

The standard ($p^{°}=0.1\text{MPa}$) molar enthalpy of formation of 4-methyldibenzothiophene, in the gaseous phase, at T = 298.15 K, was derived from the combination of the values of the standard molar enthalpy of formation, in the crystalline phase, at T = 298.15 K, and the standard molar enthalpy of sublimation, at the same temperature. The standard molar enthalpy of formation in the crystalline phase, determined from the standard massic energy of combustion, in oxygen, is (70.9 ± 4.8) kJ · mol^?1 and was measured by rotating-bomb combustion calorimetry. From Calvet microcalorimetry measurements, the standard molar enthalpy of sublimation obtained is (90.3 ± 0.7) kJ · mol^?1.     

Energetic effects of ether and ketone functional groups in 9,10-dihydroanthracene compound

The energetic effects caused by replacing one of the methylene groups in the 9,10-dihydroanthracene by ether or ketone functional groups yielding xanthene and anthrone species, respectively, were determined from direct comparison of the standard (p° = 0.1 MPa) molar enthalpies of formation in the gaseous phase, at T = 298.15 K, of these compounds. The experimental static-bomb combustion calorimetry and Calvet microcalorimetry and the computational G3(MP2)//B3LYP method were used to get the standard molar gas-phase enthalpies of formation of xanthene, (41.8 ± 3.5) kJ · mol^?1, and anthrone, (31.4 ± 3.2) kJ · mol^?1. The enthalpic increments for the substitution of methylene by ether and ketone in the parent polycyclic compound (9,10-dihydroanthracene) are ?(117.9 ± 5.5) kJ · mol^?1 and ?(128.3 ± 5.4) kJ · mol^?1, respectively.     

Energetic and structural properties of 4-nitro-2,1,3-benzothiadiazole

The energetic study of 4-nitro-2,1,3-benzothiadiazole has been developed using experimental techniques together with computational approaches. The standard (p^° = 0.1 MPa) molar enthalpy of formation of crystalline 4-nitro-2,1,3-benzothiadiazole (181.9 ± 2.3 kJ · mol⁻¹) was determined from the experimental standard molar energy of combustion −(3574.3 ± 1.3) kJ · mol⁻¹, in oxygen, measured by rotating-bomb combustion calorimetry at T = 298.15 K. The standard (p^° = 0.1 MPa) molar enthalpy of sublimation, at T = 298.15 K, (101.8 ± 4.3) kJ · mol⁻¹, was determined by a direct method, using the vacuum drop microcalorimetric technique. From the latter value and from the enthalpy of formation of the solid, it was calculated the standard (p^° = 0.1 MPa) enthalpy of formation of gaseous 4-nitro-2,1,3-benzothiadiazole as (283.7 ± 4.9) kJ · mol⁻¹. Standard ab initio molecular orbital calculations were performed using the G3(MP2)//B3LYP composite procedure and several working reactions in order to derive the standard molar enthalpy of formation 4-nitro-2,1,3-benzothiadiazole. The ab initio results are in good agreement with the experimental data.     

Experimental and theoretical thermochemistry of β-tetralone

The standard (p^° = 0.1 MPa) molar enthalpy of formation β-tetralone was measured, at T = 298.15 K, by static bomb calorimetry and the standard molar enthalpy of vaporization, at T = 298.15 K, was obtained using Calvet microcalorimetry.These values were used to derive the standard molar enthalpy of formation of the compound in the gaseous phase, at T = 298.15 K, ?(75.2 ± 2.5) kJ · mol^?1.Additionally, high-level density functional theory calculations using the B3LYP hybrid exchange-correlation energy function with extended basis sets and more accurate correlated computational techniques of the MCCM/3 suite have been performed.     

Calorimetric study of 2′-methylacetophenone and 4′-methylacetophenone

Values of the condensed phase standard (p = 0.1 MPa) molar enthalpy of formation for 2′- and 4′-methylacetophenones were derived from the standard molar energies of combustion, in oxygen, at T = 298.15 K, measured by static bomb combustion calorimetry. The values of the standard molar enthalpy of vaporization, at T = 298.15 K, were measured by Calvet microcalorimetry. Combining these two values, the following enthalpies of formation in the gas phase, at T = 298.15 K, were then derived: 2′-methylacetophenone, –(115.7 ± 2.4) kJ · mol⁻¹, and 4′-methylacetophenone, –(122.6 ± 2.4) kJ · mol⁻¹. Substituent effects are discussed in terms of stability and compared with other similar compounds. The value of the standard molar enthalpy of formation for 3′-methylacetophenone was estimated from isomerization schemes.     

Low-temperature heat capacity and standard molar enthalpy of formation of 9-fluorenemethanol (C14H12O)

Low-temperature heat capacities of the 9-fluorenemethanol (C₁₄H₁₂O) have been precisely measured with a small sample automatic adiabatic calorimeter over the temperature range between T=78 K and T=390 K. The solid–liquid phase transition of the compound has been observed to be T_fus=(376.567±0.012) K from the heat-capacity measurements. The molar enthalpy and entropy of the melting of the substance were determined to be Δ_fusH_m=(26.273±0.013) kJ · mol⁻¹ and Δ_fusS_m=(69.770±0.035) J · K⁻¹ · mol⁻¹. The experimental values of molar heat capacities in solid and liquid regions have been fitted to two polynomial equations by the least squares method. The constant-volume energy and standard molar enthalpy of combustion of the compound have been determined, Δ_cU(C₁₄H₁₂O, s)=−(7125.56 ± 4.62) kJ · mol⁻¹ and Δ_cH_m^∘(C₁₄H₁₂O, s)=−(7131.76 ± 4.62) kJ · mol⁻¹, by means of a homemade precision oxygen-bomb combustion calorimeter at T=(298.15±0.001) K. The standard molar enthalpy of formation of the compound has been derived, Δ_fH_m^∘(C₁₄H₁₂O,s)=−(92.36 ± 0.97) kJ · mol⁻¹, from the standard molar enthalpy of combustion of the compound in combination with other auxiliary thermodynamic quantities through a Hess thermochemical cycle.     

Experimental study on the thermochemistry of 1-(2H)-phthalazinone and phthalhydrazide

The standard (p^° = 0.1 MPa) molar enthalpies of combustion of 1-(2H)-phthalazinone and phthalhydrazide, both in the solid phase, were measured at T = 298.15 K by static bomb calorimetry. Further, the standard molar enthalpies of sublimation, at T = 298.15 K, of these two phthalazine derivatives were derived from the Knudsen effusion technique. The combustion calorimetry results together with those obtained from the Knudsen effusion technique, were used to derive the standard molar enthalpies of formation, at T = 298.15 K, in the gaseous phase for 1-(2H)-phthalazinone and phthalhydrazide, respectively as, (79.1 ± 1.8) kJ · mol^?1 and ?(107.4 ± 2.4) kJ · mol^?1.     

Thermochemical study of some methoxytetralones

The standard (p^° = 0.1 MPa) molar energies of combustion in oxygen, at T = 298.15 K, of 5-, 6- and 7-methoxy-α-tetralone were measured by static bomb calorimetry. The values of the standard molar enthalpies of sublimation were obtained by Calvet microcalorimetry and corrected to T = 298.15 K. Combining these results, the standard molar enthalpies of formation of the compounds, in the gas phase, at T = 298.15 K, have been calculated, 5-methoxy-α-tetralone -(244.8 ± 1.9) kJ · mol^?1, 6-methoxy-α-tetralone ?(243.0 ± 2.8) kJ · mol^?1 and 7-methoxy-α-tetralone ?(242.3 ± 2.6) kJ · mol^?1.Additionally, high-level density functional theory calculations using the B3LYP hybrid exchange–correlation energy functional with extended basis sets and more accurate correlated computational techniques of the MCCM/3 suite have been performed for the compounds. The agreement between experiment and theory gives confidence to estimate the enthalpy of formation of 8-methoxy-α-tetralone. Similar calculations were done for the 5-, 6-, 7- and 8-methoxy-β-tetralone, for which experimental work was not done.     

Energetic studies of urea derivatives: Standard molar enthalpy of formation of 3,4,4′-trichlorocarbanilide

Thermochemical and thermophysical studies have been carried out for crystalline 3,4,4′-trichlorocarbanilide. The standard (p° = 0.1 MPa) molar enthalpy of formation, at T = 298.15 K, for the crystalline 3,4,4′-trichlorocarbanilide (TCC) was experimentally determined using rotating-bomb combustion calorimetry, as ?(234.6 ± 8.3) kJ · mol^?1. The standard enthalpy of sublimation, at the reference temperature of 298.15 K, was measured by the vacuum drop microcalorimetric technique, using a High Temperature Calvet Microcalorimeter as (182.1 ± 1.7) kJ · mol^?1. These two thermochemical parameters yielded the standard molar enthalpy of formation of the studied compound, in the gaseous phase, at T = 298.15 K, as ?(52.5 ± 8.5) kJ · mol^?1. This parameter was also calculated by computational thermochemistry at M05-2X/6-311++G7 and B3LYP/6-311++G(3df, 2p) levels, with a deviation less than 4.5 kJ · mol^?1 from experimental value. Moreover, the thermophysical study was made by differential scanning calorimetry, DSC, over the temperature interval between T = 263 K and its onset fusion temperature, T = (527.5 ± 0.4) K. A solid–solid phase transition was found at T = (428 ± 1) K, with the enthalpy of transition of (6.1 ± 0.1) kJ · mol^?1. The X-ray crystal structure of TCC was determined and the three-centred N–H?OC hydrogen bonds present analyzed.     

Renewable platform-chemicals and materials: Thermochemical study of levulinic acid

The standard molar enthalpy of formation in the gaseous state (?613.5 ± 2.2) kJ · mol^?1 of levulinic acid has been obtained from combustion calorimetry and results from the temperature dependence of the vapour pressure measured by the transpiration method. In order to verify the experimental data, first-principles calculations have been performed. Enthalpies of formation derived from G4 and G3MP2 methods are in an excellent agreement with the experimental results. Thermodynamic analysis of the hydrolysis of 5-hydroxymethylfurfural to the levulinic and formic acids has revealed very high feasibility of these reactions with equilibrium constants completely shifted to the desired reaction products even at T = 298.15 K.     

Thermochemical study of the isomeric compounds: 3-acetylbenzonitrile and benzoylacetonitrile

The standard (p° = 0.1 MPa) molar enthalpies of formation of 3-acetylbenzonitrile and benzoylacetonitrile, in the crystalline phase, were derived from the respective standard massic energies of combustion measured by static bomb combustion calorimetry, in oxygen, at T = 298.15 K. The standard molar enthalpies of sublimation, at T = 298.15 K, were measured by Calvet microcalorimetry. From the above experimentally determined enthalpic parameters, the standard molar enthalpies of formation in the gaseous phase, at T = 298.15 K, are found to be: (52.4 ± 2.1) kJ · mol⁻¹ and (74.8 ± 2.5) kJ · mol⁻¹ for 3-acetylbenzonitrile and benzoylacetonitrile, respectively.Molecular structures were computed using highly accurate ab initio techniques. Standard molar enthalpies of formation of the experimentally studied compounds were derived using an appropriate set of working reactions. Very good agreement between the calculated and the experimental values was obtained, so the calculations were extended to the estimates of the standard molar enthalpies of formation of 2- and 4-acetylbenzonitriles whose study was not performed experimentally.Our results were further interpreted and rationalized in terms of the enthalpic stability and compared to other relevant disubstituted benzenes.     

Experimental and computational thermochemistry of the dihydroxypyridine isomers

The standard (p^∘ = 0.1 MPa) molar enthalpy of formation for crystalline 2,3-dihydroxypyridine was measured, at T = 298.15 K, by static bomb calorimetry and the standard molar enthalpy of sublimation, at T = 298.15 K, was obtained using Calvet microcalorimetry. These values were used to derive the standard molar enthalpy of formation of 2,3-dihydroxypyridine in gaseous phase, at T = 298.15 K, –(263.9 ± 4.6) kJ · mol⁻¹.Additionally, high-level density functional theory calculations using the B3LYP hybrid exchange-correlation energy functional with extended basis sets have been performed for all dihydroxypyridine isomers to determine the thermochemical order of stability of these systems. The agreement between experiment and theory for the 2,3-dihydroxypyridine isomer gives confidence to the estimates of the enthalpies of formation concerning the other five isomers. It is found that the enthalpic increment for the dihydroxy substitution of pyridine is equal to the sum of the respective enthalpic increment of the monosubstituted pyridines.     

Calorimetric and computational study of 7-hydroxycoumarin

The standard (p° = 0.1 MPa) molar energy of combustion in oxygen, at T = 298.15 K, of 7-hydroxycoumarin was measured by static bomb calorimetry. The value of the standard molar enthalpy of sublimation was obtained by Calvet microcalorimetry and corrected to T = 298.15 K. Combining these results, the standard molar enthalpy of formation of the compound, in the gas phase, at T = 298.15 K, has been calculated, ?(337.5 ± 2.3) kJ · mol^?1. The values for the temperature of fusion, T_fusion, and for the fusion enthalpy, at T = T_fusion, are also reported.Additionally, high-level density functional theory calculations using the B3LYP hybrid exchange-correlation energy functional with extended basis sets, the MC3BB and MC3MPW methods and more accurate correlated computational techniques of the MCCM suite have been performed for the compound.The agreement between experiment and theory gives confidence to estimate the enthalpy of formation of the remaining hydroxycoumarins substituted in the benzene ring.     

Thermochemistry of two lead borates; Pb(BO2)2·H2O and PbB4O7·4H2O

Two pure hydrated lead borates, Pb(BO₂)₂·H₂O and PbB₄O₇·4H₂O, have been characterized by XRD, FT-IR, DTA-TG techniques and chemical analysis. The molar enthalpies of solution of Pb(BO₂)₂·H₂O and PbB₄O₇·4H₂O in 1 mol dm^?3 HNO₃(aq) were measured to be (?35.00 ± 0.18) kJ mol^?1 and (35.37 ± 0.14) kJ mol^?1, respectively. The molar enthalpy of solution of H₃BO₃(s) in 1 mol dm^?3 HNO₃(aq) was measured to be (21.19 ± 0.18) kJ mol^?1. The molar enthalpy of solution of PbO(s) in (HNO₃ + H₃BO₃)(aq) was measured to be ?(61.84 ± 0.10) kJ mol^?1. From these data and with incorporation of the enthalpies of formation of PbO(s), H₃BO₃(s) and H₂O(l), the standard molar enthalpies of formation of ?(1820.5 ± 1.8) kJ mol^?1 for Pb(BO₂)₂·H₂O and ?(4038.1 ± 3.4) kJ mol^?1 for PbB₄O₇·4H₂O were obtained on the basis of the appropriate thermochemical cycles.     

Experimental and computational thermochemistry of 1,4-benzodioxan and its 2-R derivatives

The standard molar energies of combustion, at T = 298.15 K, of crystalline 1,4-benzodioxan-2-carboxylic acid and 1,4-benzodioxan-2-hydroxymethyl were measured by static bomb calorimetry in an oxygen atmosphere. The standard molar enthalpies of sublimation, at T = 298.15 K, were obtained by Calvet microcalorimetry. These values were used to derive the standard molar enthalpies of formation of the compounds in the gas phase at T = 298.15 K: 1,4-benzodioxan-2-carboxylic acid ?(547.7 ± 3.0) kJ · mol^?1 and 1,4-benzodioxan-2-hydroxymethyl ?(374.2 ± 2.3) kJ · mol^?1.In addition, density functional theory calculations using the B3LYP hybrid exchange–correlation energy functional with extended basis sets, 6-311G⁷ and cc-pVTZ, have been performed for the compounds studied. We have also tested two more accurate computational procedures involving multiple levels of electron structure theory in order to get reliable estimates of the thermochemical parameters of the compounds studied. The agreement between experiment and theory gives confidence to estimate the enthalpies of formation of other 2-R derivatives of 1,4-benzodioxan (R = –CH₂COOH, –OH, –COCH₃, –CHO, –CH₃, –CN, and –NO₂).