Up conversion luminescence of Yb3+–Er3+ codoped CeO2 nanocrystals with imaging applications

The effects of Yb³⁺ doping on up conversion in Yb³⁺–Er³⁺ co-doped cerium oxide nanocrystals are reported. Green emission around 545 and 560 nm attributed to the ²H_11/2, ⁴S_3/2→⁴I_15/2 transitions and red emission around 660 and 680 nm due to ⁴F_9/2→ ⁴I_15/2 transitions under 975 nm excitation were studied at room temperature. Both green and red emission intensities increase as the Yb³⁺ concentration increases from 0%. Emission strength starts to decrease after the Yb³⁺ concentration exceeds a critical amount. The green emission strength peaks around 1% Yb³⁺ concentration while the red emission strength peaks around 4%. An explanation of competition between different decay mechanisms is presented to account for the luminescence dependence on Yb³⁺ concentration. Also, the application of up converting nanoparticles in biomedical imaging is demonstrated.     

Optical characteristics of Tb-doped InBO3 nanocrystals

InBO₃ nanocrystals doped with Tb³⁺ ions are prepared via the sol–gel method. The structure, morphology, and optical properties of the nanocrystals are characterized by X-ray diffraction, high-resolution transmission electron microscopy, field-emission scanning electron microscopy, and photoluminescence analysis. The results show that a hexagonal InBO₃ phase forms at above 650 °C. A second phase of In₂O₃ begins to appear with Tb doping of over 3 mol%. The ⁵D₄→⁷F₅ (553 nm) transitions of Tb³⁺ ions in the InBO₃ host are observed at 2 mol%. The decay time of Tb-doped InBO₃ nanocrystals is about 2.1 ms. For Tb-doped InBO₃ nanocrystals excited at 237 nm and 553 nm wavelengths, the 2 mol% doping level yields the highest saturation of green emission. The emission shifts from green to yellow when the doping concentration is increased from 1 to6 mol%, due to the ⁵D₄→⁷F₅ transition.     

Enhanced infrared to visible upconversion emission in Er3+ doped phosphate glass: Role of silver nanoparticles

Phosphate glasses with compositions (59.5–x)P₂O₅–MgO–xAgCl–0.5Er₂O₃ (0.0≤x≤1.5 mol%) containing fixed concentration of Er³⁺ ion with and without silver nanoparticles (NPs) are prepared using melt quenching technique. The amorphous nature of the glass is confirmed using the X-ray diffraction method. The homogeneous distribution of spherical Ag NPs (average size ～37 nm) in the glassy matrix is evidenced from the transmission electron microscopy (TEM) analyses. The UV–vis–NIR absorption spectra shows 10 bands corresponding to ⁴I_13/2, ⁴I_11/2, ⁴I_9/2, ⁴F_9/2, ⁴S_3/2, ²H_11/2, ⁴F_7/2, ⁴F_5/2, ²G_9/2, ⁴G_11/2 transitions in which the most intense bands are ²H_11/2 and ⁴G_11/2. The absorption spectrum of Er³⁺ ions free glass sample containing Ag NPs displays a prominent surface Plasmon resonance (SPR) band located at 528 nm. The infrared to visible frequency upconversion (UC) emission under 797 nm excitation shows two emission bands green (⁴S_3/2–⁴I_15/2) and red (⁴F_9/2–⁴I_15/2) centered at 540 nm and 634 nm, respectively, corresponding to Er³⁺ transitions. An enhancement in UC emission intensity of green band (⁴S_3/2–⁴I_15/2) is observed in the presence of silver NPs and the maximum enhancement occurred for 1.5 mol% AgCl. However, the enhancement of emission intensity of the red band (⁴F_9/2–⁴I_15/2) is smaller. The enhancement of UC emission is understood in terms of the intensified local field effect due to silver NPs.     

Up-conversion luminescence and optical temperature-sensing properties of Er3+-doped perovskite Na0.5Bi0.5TiO3 nanocrystals

In this work we demonstrate the preparation of Er³⁺ doped perovskite ferroelectric Na_0.5Bi_0.5TiO₃ nanocrystals and their application in temperature sensing. The samples were synthesized via a facile hydrothermal method. Upconversion emission at 528 nm and 547 nm from two thermodynamically coupled excited states of Er³⁺ were recorded in the temperature from 80 K to 480 K under the excitation of a 980 nm diode laser. The emission intensity ratio (I₅₂₈/I₅₄₇) as a function of the temperature was investigated. A sensitivity of 0.0053 K⁻¹ is observed at 400 K, suggesting they are promising candidate for nanothermometers.     

Erbium-doped lead silicate glass for near-infrared emission and temperature-dependent up-conversion applications

Erbium-doped lead silicate glass has been investigated for near-infrared emission and up-conversion applications. Near-infrared emission due to ⁴I_13/2 → ⁴I_15/2 transition of Er³⁺ is relatively broad (70.5 nm) and long-lived (3.7 ms). Also, up-conversion luminescence spectra of Er³⁺ ions in lead silicate glass have been examined as a function of temperature. The relative intensities of luminescence bands corresponding to ²H_11/2 → ⁴I_15/2 and ⁴S_3/2 → ⁴I_15/2 transitions of Er³⁺ were determined with temperature. The fluorescence intensity ratio and temperature sensitivity were calculated. The maximum sensitivity for Er³⁺ doped lead silicate glass is close to 26.4 × 10^?4 K^?1 at T = 590 K.     

Synthesis of biocompatible uniform NaYF4:Yb3+,Er3+ nanocrystals and their characteristic photoluminescence

For biological application, lanthanide ion doped upconverting nanocrystals should be modified to be biocompatible. Here, we show a viable and efficient procedure for producing biocompatible NaYF₄:Yb³⁺,Er³⁺ upconverting nanocrystals. The uniform NaYF₄:Yb,Er upconverting nanocrystals were firstly synthesized by a mild chemical procedure, which were subsequently coated with a layer of polyethylene-glycol (PEG) to be biocompatible. The photoluminescent intensity of the PEG coated NaYF₄:Yb,Er nanocrystals varies nonlinearly with increasing the thickness of the PEG coating. In particular, it was noted that the Intensity Ratio of Red to Green Emission (IRRGE) of PEG coated NaYF₄:Yb,Er was highly depended on the excitation power density: IRRGE keeping almost constant with increasing the excitation power density below 826 W/cm², but remarkably increasing when increasing the excitation power density above 826 W/cm². For this unique phenomenon, the excitation and emission mechanisms related to PEG coating were discussed.     

Comparative study of the spectroscopic properties of Yb3+/Er3+ codoped tellurite glasses modified with R2O (R=Li,Na and K)

Spectroscopic characterization of Yb³⁺/Er³⁺ codoped TeO₂–R₂O–ZnO–Ln₂O₃ glasses as a function of network modifiers (R=Li, Na and K) has been investigated. The Judd–Ofelt parameters (Ω_t), quantum efficiency in near infrared (1.55 μm) and visible up-conversion (546 and 660 nm) and quality factor spectroscopy (χ) were calculated. Three up-conversion emission bands centered at 525, 546 and 660 nm were observed as maxima for glasses containing potassium. The measured lifetime of ⁴I_13/2, ⁴F_9/2 and ⁴S_3/2 from Er³⁺ and ⁴F_5/2 from Yb³⁺ levels increased when potassium (K) replaced lithium (Li) and Na. The maximum emission cross-section (ECS) for ⁴I_13/2→⁴I_15/2 transition of Er³⁺ was calculated to be 1.02×10^?20 cm² for TeO₂–Li₂O–ZnO–Ln₂O₃ glasses. The energy transfer efficiency (ET) from Yb³⁺ to Er³⁺, (⁴F_5/2)+(⁴I_15/2)→(⁴F_7/2)+(⁴I_13/2), was calculated using the measured lifetimes of Yb³⁺ with and without the presence of acceptor (Er³⁺). The maximum calculated ET was 58% for 0.25 mol% of Er³⁺ and 3 mol% of Yb³⁺ for TeO₂–K₂O–ZnO–Ln₂O₃ glass composition.     

Structural and luminescence properties of Nd3+-doped PbO–B2O3–TiO2–AlF3 glass for 1.07 μm laser applications

Trivalent neodymium doped multi-component lead borate titanate aluminumfluoride (LBTAFNd) glasses were prepared and characterized as a function of Nd³⁺ ions concentration through optical absorption, NIR luminescence and decay measurements. The intensity (Ω_2,4,6) and other radiative parameters were determined within the frame work of Judd–Ofelt theory. The intensities of absorption bands were expressed in terms of experimental oscillator strengths. Reasonably small root mean square deviation of ±0.384×10^?6 obtained between the experimental and calculated oscillator strengths indicates the validity of intensity parameters. Upon 805 nm laser excitation, the NIR emissions at 0.92 μm (⁴F_3/2→⁴I_9/2), 1.07 μm (⁴F_3/2→⁴I_11/2) and 1.35 μm (⁴F_3/2→⁴I_13/2) were observed. The spectroscopic quality factor has been determined from the Ω₄ and Ω₆ intensity parameters as well as the intensities of emission bands centered at 1.07 and 1.35 μm. The decay curves of the ⁴F_3/2 excited state were recorded by monitoring the emission and excitation wavelengths at 1.07 μm and 805 nm, respectively. The decay curves exhibit single exponential behavior for all the glasses. The laser characteristic parameters of ⁴F_3/2→⁴I_11/2 (1.07 μm) transition were determined and compared with other reported glasses.     

Photoluminescence investigations of Li2SiO3:Ln (Ln=Er3+, Eu3+, Dy3+, Sm3+) phosphors

In this study, we report a comprehensive structural and photoluminescence (PL) study on lithium metasilicate (Li₂SiO₃) phosphor ceramics doped with four rare earth (RE) ions. X-ray diffraction (XRD) patterns show a dominant phase, characteristic of the orthorhombic structure Li₂SiO₃ compound and the presence of dopants has no effect on the basic crystal structure of the material. The first excited state Er³⁺ luminescence at 1.54 μm arises from a sharp atomic-like radiative transition between the ⁴I_13/2 state and the ⁴I_15/2 state (ground level) under a 532 nm line of an Ar ion laser excitation. Sm doped samples showed Sm³⁺ emission characteristics corresponding to the some ⁴G_5/2→⁶H_j (j=5/2,9/2,11/2) transitions indicating a strong crystal-field effect. PL spectra of Eu doped material exhibited peaks corresponding to the ⁵D₀→⁷F_j (j=0,1,2,3 and 4) transitions under 405 nm excitation. The dominant red color emission at 612 nm from the hypersensitive (⁵D₀→⁷F₂) transition of Eu³⁺ indicates the inversion antisymmetry crystal field around Eu³⁺ ion, which is favorable to improve the red color purity. Dy doped samples showed the Dy³⁺ emission characteristic due to the ⁴F_9/2→⁶H_13/2 transition. Their relative intensity ratios also suggested the presence of a symmetric environment around the metal ion. We suggest that lithium metasilicate has enough potential candidates to be a phosphor material.     

Near-infrared broadband luminescence and energy transfer in Bi–Tm–Er co-doped lanthanum aluminosilicate glasses

The Bi–Tm–Er co-doped SiO₂–Al₂O₃–La₂O₃ (SAL) glasses, which exhibited a broadband near-infrared (NIR) emission, were investigated by the optical absorption and photoluminescence spectra. A super broadband NIR emission extending from 0.95 to 1.6 μm with a full-width at half-maximum (FWHM) of 430 nm which covered the whole O, E, S, C and L bands, was observed in Bi–Tm–Er co-doped samples under 808 nm excitation, as a result of the overlap of the Bi-related emission band (centered at 1270 nm) and the emission from Tm^{3+ 3}H₄→³F₄ transition (1450 nm) as well as Er^{3+ 4}I_13/2→⁴I_15/2 transition (1545 nm). In addition, a super broadband emission with amplitude relatively flat from 0.95 to 2.1 μm has been observed. The possible energy transfer between Bi-related centers, Tm³⁺ ions and Er³⁺ ions was proposed.     

Synthesis and near-infrared luminescence properties of LaOCl:Nd3+/Yb3+

Near-infrared emitting phosphors LaOCl:Nd³⁺/Yb³⁺ were prepared by the solid-state method, and their structures and luminescent properties were investigated by using X-ray diffraction and photoluminescence analysis, respectively. The studies shows that tetragonal LaOCl:Nd³⁺/Yb³⁺ can be synthesized by the solid-state reaction at 600 °C for 3 h. Upon 353 nm UV excitation, LaOCl:Nd³⁺/Yb³⁺ sample shows strong near-infrared emission lines in the region of 1060–1150 nm (corresponding to ⁴F_3/2 → ⁴I_J′ transition of Nd³⁺, J′ = 9/2, 11/2, 13/2, 15/2) and 980–1050 nm (corresponding to ²F_5/2 → ²F_7/2 transition of Yb³⁺). The decreasing emission intensity of Nd³⁺ with increasing doping concentration of Yb³⁺ proved the energy transfer in LaOCl:Nd³⁺/Yb³⁺. The possible near-infrared emission and energy transfer mechanism between Nd³⁺ and Yb³⁺, as well as the energy transfer efficiency of LaOCl:Nd³⁺/Yb³⁺ were discussed.     

Synthesis of TiO2 nanoparticles and spectroscopic upconversion luminescence of Nd3+-doped TiO2–SiO2 composite glass

Nd³⁺-doped TiO₂–SiO₂ composites were prepared by sol–gel method. Optical properties such as radiative life-time (τ), stimulated emission cross-section (σ_p) and branching ratio (β) were calculated using Judd–Ofelt theory. Violet to blue upconversion emissions at 380 nm (⁴D_3/2→⁴I_11/2), 399 nm (²P_3/2→⁴I_11/2), 420 nm (²D_5/2→⁴I_9/2) and 452 nm (²P_3/2→⁴I_13/2) were obtained under 578 nm xenon-lamp excitation. The choice of 578 nm is justified by the absorption spectra of the same samples, which shows a strong absorption peak at 578 nm. This 578 nm excitation pump produces upconversion in Nd³⁺ by a sequential two-photon absorption process.     

Excited states dynamics of Er3+ in Sc2O3 ceramic

The spectral characteristics of Er³⁺ in Sc₂O₃ transparent ceramics are presented. The Er³⁺ visible spectra in the ceramics, prepared by solid-state synthesis, show only lines that could be assigned to C₂ sites. The Stark energy levels, cross-sections and emission kinetics of levels involved in the green upconversion emission under infrared excitation in the 800 nm range were determined. The green upconversion emission (²H_11/2, ⁴S_3/2)→⁴I_15/2 characteristics under excitation with a pulsed Ti:sapphire laser in (⁴I_15/2→⁴I_9/2) absorption were analyzed. The emission kinetics reveal a competition of two-step (⁴I_15/2→⁴I_9/2)+(⁴I_9/2→²H_9/2) excited state absorption (ESA) and (⁴I_11/2, ⁴I_15/2)→(⁴I_11/2, ⁴F_7/2) energy transfer upconversion (ETU) processes function on the excitation wavelength.     

Infrared to visible upconversion luminescence in Er3+/Yb3+ doped titanate glass prepared by containerless processing

Er³⁺ doped TiO₂–La₂O₃ glasses modified by ZrO₂ have been successfully fabricated by the containerless method with incorporated Yb³⁺ ions as sensitizers. Under the excitation of 980 and 808 nm diode lasers, visible emissions centered at 534, 554 and 674 nm are observed, which are assigned to the Er³⁺ transitions of ²H_11/2→⁴I_15/2, ⁴S_3/2→⁴I_15/2 and ⁴F_9/2→⁴I_15/2, respectively. The emission signals are so strong that they can be observed by naked eyes even at pumping power as low as 20 mW. Measurements of pump-power dependent intensity and time-resolved decay behavior of upconversion luminescence show that two-photon excited state absorption (ESA) and energy transfer (ET) between rare earth ions are the predominant mechanisms for upconversion emissions. Besides, the intensity of upconversion luminescence has been enhanced by increasing the concentration of ZrO₂ in these rare earth doped bulk titanate glasses.     

Microwave sol–gel derived NaCaGd(MoO4)3:Er3+/Yb3+ phosphors and their upconversion photoluminescence properties

Ternary molybdate NaCaGd_1−x(MoO₄)₃:Er³⁺/Yb³⁺ phosphors with the proper doping concentrations of Er³⁺ and Yb³⁺ (x = Er³⁺ + Yb³⁺, Er³⁺ = 0, 0.05, 0.1, 0.2 and Yb³⁺ = 0, 0.2, 0.45) were successfully synthesized by microwave sol–gel method for the first time. Well-crystallized particles formed after heat-treatment at 900 °C for 16 h showed a fine and homogeneous morphology with particle sizes of 3–5 μm. The optical properties were examined comparatively using photoluminescence emission and Raman spectroscopy. Under excitation at 980 nm, the doped particles exhibited a strong 525-nm emission band, a weak 550-nm emission band in the green region, which correspond to the ²H_11/2 → ⁴I_15/2 and ⁴S_3/2 → ⁴I_15/2 transitions, and a very weak 655-nm emission band in the red region, which corresponds to the ⁴F_9/2 → ⁴I_15/2 transition. The optimal Yb³⁺:Er³⁺ ratio was obtained to be 9:1, as indicated by the composition-dependent quenching effect of Er³⁺ ions. The pump power dependence of upconversion emission intensity and Commission Internationale de L’Eclairage chromaticity coordinates of the phosphors were evaluated in detail.     

Photoluminescence of Er-doped Si-SiO2 and Al–Si-SiO2 sputtered thin films

Er-doped Si-SiO₂ and Al–Si-SiO₂ films have been deposited by rf-sputtering being annealed afterwards. Annealing behavior of the Er³⁺: ⁴I_13/2→⁴I_15/2 emission of Er-doped Si-SiO₂ yields a maximum intensity for annealing at 700–800 °C. ⁴I_13/2→⁴I_15/2 peak emission for Er-doped Al–Si-SiO₂ at 1525 nm is shifted from that for Er-doped Si-SiO₂ at 1530 nm and the bandwidth increases from 29 to 42 nm. ⁴I_13/2→⁴I_15/2 emission decays present a fast decaying component related to Er ions coupled to Si nanoparticles, defects, or other ions, and a slow decaying component related to isolated Er ions. Excitation wavelength dependence and excitation power dependence for the ⁴I_13/2→⁴I_15/2 emission correspond with energy transfer from Si nanoparticles. Populating of the ⁴I_11/2 level in Er-doped Si-SiO₂ involves branching and energy transfer upconversion involving two or more Er ions. Addition of Al reduces the populating of this level to an energy transfer upconversion involving two ions.     

Positive influence of Tm3+ on effective Er3+: 3 μm emission in fluoride glass under 980 nm excitation

Er³⁺ and Tm³⁺ singly doped and codoped new fluoride glasses were prepared by traditional melt-quenching method. Efficient 3 μm emission was obtained under 980 nm laser excitation. It is worthy to notice that one of the two ions can be the sensitizer to the other one by depressing the Er³⁺: 1.5 μm emission through the energy transfer process from Er³⁺:⁴I_13/2 level to Tm³⁺:³F₄ level. On the basis of measured absorption spectra, the Judd-Ofelt intensity parameters and radiation emission probability were calculated to evaluate the spectroscopic properties. Additionally, the micro-parameters together with the phonon assistance of Er³⁺:⁴I_13/2 → Tm³⁺:³F₄ and Er³⁺:⁴I_11/2 → Tm³⁺:³H₅ processes were quantitatively analyzed by using Dexter model. The theoretical micro-parameters results meet well with the experiments which indicates that Er³⁺/Tm³⁺ codoped fluoride glass is a potential kind laser glass for 3 μm laser.     

Intense 974 nm emission from ErxYb2−xSi2O7 films through efficient energy transfer up-conversion from Er3+ to Yb3+ for Si solar cell

The optical properties of the Er_xYb_2?xSi₂O₇ thin films were investigated by photoluminescence measurements and the intense 974 nm light emission was observed. The 974 nm emission was mainly from the transition ²F_5/2 to ²F_7/2 level of Yb³⁺ upon exploring energy-transfer via up-conversion at Er^{3+ 4}I_13/2 level. Under 972 nm excitation, the lifetime at Er^{3+ 4}I_13/2 level reaches up to 4 ms for film containing 2 at% Er³⁺, while decreases to about 20 μs as the film is pumped by 488 nm. This confirmed that the energy transfer up-conversion process was the dominant transition at Er^{3+ 4}I_13/2 level. This may be of interest to improve the solar cells′ efficiency by placing this film at the rear of cell, converting the near-infrared photons between 1480 nm and 1580 nm to just above the Si bandgap.     

Infrared-to-visible up-conversion luminescence and energy transfer of RE3+/Yb3+(RE = Ho,Tm) co-doped SrIn2O4

Near-infrared excited up-conversion phosphors of RE³⁺/Yb³⁺(RE = Ho, Tm) co-doped SrIn₂O₄ were synthesized by a solid-state reaction method. X-ray diffraction analysis revealed the phase composition of those samples, and the up-conversion spectroscopic properties were studied in terms of up-conversion emission spectra. Under 980 nm near-infrared laser excitation, strong green emission with the peak at 546 nm was observed in SrIn₂O₄: Ho³⁺/Yb³⁺, which can be assigned to the characteristic ⁵S₂(⁵F₄) → ⁵I₈ transition of Ho³⁺. Furthermore, SrIn₂O₄: Tm³⁺/Yb³⁺ showed bright blue emission with the peak at 486 nm, which is associated with the ¹G₄ → ³H₆ transition of Tm³⁺. The UC power studies indicated that the luminescence of SrIn₂O₄: Ho³⁺/Yb³⁺ and SrIn₂O₄: Tm³⁺/Yb³⁺ are attributed to two-photon and three-photon process, respectively. The possible UC luminescence mechanism and energy transfer in SrIn₂O₄: RE³⁺/Yb³⁺ were discussed.     

Quasi-one dimensional Er3+–Yb3+ codoped single-crystal MoO3 ribbons: Synthesis,characterization and up-conversion luminescence

The quasi-one dimensional (Q1D) Er³⁺–Yb³⁺ codoped single-crystal MoO₃ ribbons with width range from 1 to 5 μm, and maximum length about 30 μm have been synthesized by the vapor transport method. The samples were characterized using X-ray diffraction, scanning electron microscopy, transmission electron microscope, and luminescence spectra. By a 975 nm laser diode (LD) as excitation source, the blue, green and red emission bands centered at about 408, 532, 553 and 657 nm were detected, which attributed to the ²H_9/2 → ⁴I_15/2, ²H_11/2, ⁴S_3/2 → ⁴I_15/2 and ⁴F_9/2 → ⁴I_15/2 transitions of Er³⁺, respectively. The three-, and two-photon process was responsible for the blue, green and red up-conversion emissions mechanism for the Q1D Er³⁺–Yb³⁺ codoped single-crystal MoO₃ ribbons, respectively. The results suggested that the Q1D Er³⁺–Yb³⁺ codoped single-crystal MoO₃ ribbons will have potential applications in remote bio-imaging and surface enhanced Raman scattering.