Novel products from C6H5 + C6H6/C6H5 reactions

To date only one product, biphenyl, has been reported to be produced from C(6)H(5) + C(6)H(6)/C(6)H(5) reactions. In this study, we have investigated some unique products of C(6)H(5) + C(6)H(6)/C(6)H(5) reactions via both experimental observation and theoretical modeling. In the experimental study, gas-phase reaction products produced from the pyrolysis of selected aromatics and aromatic/acetylene mixtures were detected by an in situ technique, vacuum ultraviolet (VUV) single photon ionization (SPI) time-of-flight mass spectrometry (TOFMS). The mass spectra revealed a remarkable correlation in mass peaks at m/z = 154 {C(12)H(10) (biphenyl)} and m/z = 152 {C(12)H(8) (?)}. It also demonstrated an unexpected correlation among the HACA (hydrogen abstraction and acetylene addition) products at m/z = 78, 102, 128, 152, and 176. The analysis of formation routes of products suggested the contribution of some other isomers in addition to a well-known candidate, acenaphthylene, in the mass peak at m/z = 152 (C(12)H(8)). Considering the difficulties of identifying the contributing isomers from an observed mass number peak, quantum chemical calculations for the above-mentioned reactions were performed. As a result, cyclopenta[a]indene, as-indacene, s-indacene, biphenylene, acenaphthylene, and naphthalene appeared as novel products, produced from the possible channels of C(6)H(5) + C(6)H(6)/C(6)H(5) reactions rather than from their previously reported formation pathways. The most notable point is the production of acenaphthylene and naphthalene from C(6)H(5) + C(6)H(6)/C(6)H(5) reactions via the PAC (phenyl addition-cyclization) mechanism because, until now, both of them have been thought to be formed via the HACA routes. In this way, this study has paved the way for exploring alternative paths for other inefficient HACA routes using the PAC mechanism.     

Role of phenyl radicals in the growth of polycyclic aromatic hydrocarbons

To investigate the role of phenyl radical in the growth of PAHs (polycyclic aromatic hydrocarbons), pyrolysis of toluene with and without benzene has been studied by using a heatable tubular reactor couple with an in-situ sampling vacuum ultraviolet (VUV) single photon ionization (SPI) time-of-flight mass spectrometer (TOFMS) at temperatures 1155-1467 K and a pressure of 10.02 Torr with 0.56 s residence time. When benzene was added, a significant increase of phenyl addition products (biphenyl, terphenyl, and triphenylene) was observed and the mass spectra showed a clear regular sequence with an interval of approximately 74 mass number, corresponding to the phenyl addition (+C6H5) followed by H-elimination (-H) and cyclization (-H2). The analysis showed that the PAC (phenyl addition/cylization) mechanism is efficient for the growth of PAHs without a triple fusing site, for which the HACA (hydrogen abstraction/C2H2 addition) step is inefficient, and produces PAHs with five-membered rings. The PAC process was also suggested to be efficient in the subsequent growth of PAHs with five-membered rings. The role of the PAC mechanism in combustion conditions is discussed in relation to the importance of disordered five-membered ring structure in fullerene or soot core.     

Role of methyl radicals in the growth of PAHs

The role of methyl radicals in the networking of sp² carbons has been explored through kinetic analysis of mass spectra of the gas-phase products of the pyrolysis of toluene and toluene/acetone mixtures. Pyrolytic reactions were performed in a flow tube reactor at temperatures of 1140–1320 K and a constant total pressure of 10.38 Torr with a residence time of 0.585 s. On addition of acetone, methyl substituted products and their derivatives were enhanced. Mass peaks were observed in several sequences at an interval of 14 mass units; these ions correspond to methyl substituted products formed as a result of hydrogen abstraction (−H) followed by methyl radical addition (+CH₃). Each major peak was usually preceded by a peak at two mass units lower, which was likely produced through dehydrogenation/dehydrocyclization (−H₂) of methyl substituted products. Detected species include a large number of alkyl, cyclotetrafused (CT), cyclopentafused (CP) mono-, di-, and polycyclic aromatic hydrocarbons (PAHs) along with primary PAHs. The analysis showed that MAC (methyl addition/cyclization) has a unique capacity to induce the sequential growth of hexagonal networks of sp² carbons from all fusing sites [1] of a PAH. Moreover, MAC was found capable of answering an important question in PAH growth, which is expansion of the CT → CP → hexagonal network for which other reported mechanisms are inefficient.     

Unexpected Chemistry from the Reaction of Naphthyl and Acetylene at Combustion‐Like Temperatures

The hydrogen abstraction/acetylene addition (HACA) mechanism has long been viewed as a key route to aromatic ring growth of polycyclic aromatic hydrocarbons (PAHs) in combustion systems. However, doubt has been drawn on the ubiquity of the mechanism by recent electronic structure calculations which predict that the HACA mechanism starting from the naphthyl radical preferentially forms acenaphthylene, thereby blocking cyclization to a third six‐membered ring. Here, by probing the products formed in the reaction of 1‐ and 2‐naphthyl radicals in excess acetylene under combustion‐like conditions with the help of photoionization mass spectrometry, we provide experimental evidence that this reaction produces 1‐ and 2‐ethynylnaphthalenes (C₁₂H₈), acenaphthylene (C₁₂H₈) and diethynylnaphthalenes (C₁₄H₈). Importantly, neither phenanthrene nor anthracene (C₁₄H₁₀) was found, which indicates that the HACA mechanism does not lead to cyclization of the third aromatic ring as expected but rather undergoes ethynyl substitution reactions instead.     

Hydrogen‐Abstraction/Acetylene‐Addition Exposed

Polycyclic aromatic hydrocarbons (PAHs) are omnipresent in the interstellar medium (ISM) and also in carbonaceous meteorites (CM) such as Murchison. However, the basic reaction routes leading to the formation of even the simplest PAH—naphthalene (C₁₀H₈)—via the hydrogen‐abstraction/acetylene‐addition (HACA) mechanism still remain ambiguous. Here, by revealing the uncharted fundamental chemistry of the styrenyl (C₈H₇) and the ortho‐vinylphenyl radicals (C₈H₇)—key transient species of the HACA mechanism—with acetylene (C₂H₂), we provide the first solid experimental evidence on the facile formation of naphthalene in a simulated combustion environment validating the previously postulated HACA mechanism for these two radicals. This study highlights, at the molecular level spanning combustion and astrochemistry, the importance of the HACA mechanism to the formation of the prototype PAH naphthalene.     

HACA's Heritage: A Free‐Radical Pathway to Phenanthrene in Circumstellar Envelopes of Asymptotic Giant Branch Stars

The hydrogen‐abstraction/acetylene‐addition (HACA) mechanism has been central for the last decades in attempting to rationalize the formation of polycyclic aromatic hydrocarbons (PAHs) as detected in carbonaceous meteorites such as in Murchison. Nevertheless, the basic reaction mechanisms leading to the formation of even the simplest tricyclic PAHs like anthracene and phenanthrene are still elusive. Here, by exploring the previously unknown chemistry of the ortho ‐biphenylyl radical with acetylene, we deliver compelling evidence on the efficient synthesis of phenanthrene in carbon‐rich circumstellar environments. However, the lack of formation of the anthracene isomer implies that HACA alone cannot be responsible for the formation of PAHs in extreme environments. Considering the overall picture, alternative pathways such as vinylacetylene‐mediated reactions are required to play a crucial role in the synthesis of complex PAHs in circumstellar envelopes of dying carbon‐rich stars.     

Ab initio G3-type/statistical theory study of the formation of indene in combustion flames. I. Pathways involving benzene and phenyl radical

Ab initio G3(MP2,CC)//B3LYP calculations of the potential energy surface (PES) for the formation of indene involving hydrocarbon species abundant in combustion, including benzene, phenyl, propargyl, and methyl radicals, and acetylene, have been performed to investigate the build-up of an additional cyclopenta moiety over the existing six-member aromatic ring. They were followed by statistical calculations of high-pressure-limit thermal rate constants in the temperature range of 300-3000 K for all reaction steps utilizing conventional Rice-Ramsperger-Kassel-Marcus (RRKM) and transition-state (TST) theories. The hydrogen abstraction acetylene addition (HACA) type mechanism, which involves the formation of benzyl radical followed by addition of acetylene, is shown to have low barriers (12-16 kcal/mol) and to be a viable candidate to account for indene formation in combustion flames, such as the 1,3-butadiene flame, where this mechanism was earlier suggested as the major indene formation route (Granata et al. Combust. Flame 2002, 131, 273). The mechanism of indene formation involving the addition of propargyl radical to benzene and rearrangements on the C9H9 PES is demonstrated to have higher barriers for all reaction steps as compared to an alternative pathway, which starts from the recombination of phenyl and propargyl radicals and then proceeds by activation of the C9H8 adducts by H abstraction or elimination followed by five-member ring closure in C9H7 and H addition to the 2-indenyl radical. The suggested pathways represent potentially important contributors to the formation of indene in combustion flames, and the computed rate constants can be utilized in kinetic simulations of the reaction mechanisms leading to indene and to higher cyclopentafused polycyclic aromatic hydrocarbons (CP-PAH).     

Pyrolysis of methyl tert-butyl ether (MTBE). 1. Experimental study with molecular-beam mass spectrometry and tunable synchrotron VUV photoionization

An experimental study of methyl tert-butyl ether (MTBE) pyrolysis (3.72% MTBE in argon) has been performed at low pressure (267 Pa) within the temperature range from 700 to 1420 K. The pyrolysis process was detected with the tunable synchrotron vacuum ultraviolet (VUV) photoionization and molecular-beam mass spectrometry (MBMS). About thirty intermediates are identified from near-threshold measurements of photoionization mass spectrum and photoionization efficiency spectrum. Among them, H2, CO, CH4, CH3OH and C4H8 are the major pyrolysis products. The radicals such as methyl, methoxy, propargyl, allyl, C4H5 and C4H7 are detected. The isomers of pyrolysis products are identified as well, i.e., propyne and allene, 1,2,3-butatriene and vinylacetylene, isobutene and 1-butene, propanal and acetone. Furthermore, the mole fractions of the pyrolysis products have been evaluated under various temperatures. Meanwhile, the initial formation temperatures of different pyrolysis products can be obtained. This work is anticipated to present a new experimental method for pyrolysis study and help understand the pyrolysis and combustion chemistry of MTBE and other oxygenated fuels.     

Chemistry of polycyclic aromatic hydrocarbons formation from phenyl radical pyrolysis and reaction of phenyl and acetylene

An experimental investigation of phenyl radical pyrolysis and the phenyl radical + acetylene reaction has been performed to clarify the role of different reaction mechanisms involved in the formation and growth of polycyclic aromatic hydrocarbons (PAHs) serving as precursors for soot formation. Experiments were conducted using GC/GC-MS diagnostics coupled to the high-pressure single-pulse shock tube present at the University of Illinois at Chicago. For the first time, comprehensive speciation of the major stable products, including small hydrocarbons and large PAH intermediates, was obtained over a wide range of pressures (25-60 atm) and temperatures (900-1800 K) which encompass the typical conditions in modern combustion devices. The experimental results were used to validate a comprehensive chemical kinetic model which provides relevant information on the chemistry associated with the formation of PAH compounds. In particular, the modeling results indicate that the o-benzyne chemistry is a key factor in the formation of multi-ring intermediates in phenyl radical pyrolysis. On the other hand, the PAHs from the phenyl + acetylene reaction are formed mainly through recombination between single-ring aromatics and through the hydrogen abstraction/acetylene addition mechanism. Polymerization is the common dominant process at high temperature conditions.     

Unified kinetic model of soot formation in the pyrolysis and oxidation of aliphatic and aromatic hydrocarbons in shock waves

The formation of soot particles in the pyrolysis and oxidation of various aromatic and aliphatic hydrocarbons in argon behind reflected shock waves has been investigated by computational and theoretical methods. The hydrocarbons examined include methane, ethane, propane (aliphatic hydrocarbons with ordinary bonds), acetylene, ethylene, propylene (aliphatic hydrocarbons with multiple bonds), benzene, toluene, and ethylbenzene (simplest aromatic hydrocarbons). Soot formation in the pyrolysis and oxidation of both aromatic and aliphatic hydrocarbons can be simulated in detail within a unified kinetic model. The predictive power of the unified kinetic model has been verified by directly comparing the calculated kinetic data for the formation of products and reactive radicals in the pyrolysis and oxidation of various hydrocarbons to the corresponding experimental data. In all calculations, all the kinetic parameters of the unified kinetic model were strictly fixed. A good quantitative fit between the data calculated via the unified kinetic model and experimental data has been attained.     

Experimental study and detailed modeling of toluene degradation in a low-pressure stoichiometric premixed CH4/O2/N2 flame

Temperature and mole fraction profiles have been measured in laminar stoichiometric premixed CH4/O2/N2 and CH4/1.5%C6H5CH3/O2/N2 flames at low pressure (0.0519 bar) by using thermocouple, molecular beam/mass spectrometry (MB/MS), and gas chromatography/mass spectrometry (GC/MS) techniques. The present study completes our previous work performed on the thermal degradation of benzene in CH4/O2/N2 operating at similar conditions. Mole fraction profiles of reactants, final products, and reactive and stable intermediate species have been analyzed. The main intermediate aromatic species analyzed in the methane-toluene flame were benzene, phenol, ethylbenzene, benzylalcohol, styrene, and benzaldehyde. These new experimental results have been modeled with our previous model including submechanisms for aromatics (benzene up to p-xylene) and aliphatic (C1 up to C7) oxidation. Good agreement has been observed for the main species analyzed. The main reaction paths governing the degradation of toluene in the methane flame were identified, and it occurs mainly via the formation of benzene (C6H5CH3 + H = C6H6 + CH3) and benzyl radical (C6H5CH3 + H = C6H5CH2 + H2). Due to the abundance of methyl radicals, it was observed that recombination of benzyl and methyl is responsible for main monosubstitute aromatic species analyzed in the methane-toluene flame. The oxidation of these substitute species led to cyclopentadienyl radical as observed in a methane-benzene flame.     

Mechanistic study of thermal decomposition of isoprene (2-methyl-1,3-butadiene) using flash pyrolysis supersonic jet VUV photoionization mass spectrometry

The thermal decomposition of isoprene up to 1400 K was performed by flash pyrolysis with an approximately 100 mus time scale. This pyrolysis was followed by supersonic expansion to isolate the reactive intermediates and initial products, and detection was accomplished by vacuum ultraviolet single photon ionization time-of-flight mass spectrometry (VUV-SPI-TOFMS) at lambda = 118.2 nm. Products CH(3), C(2)H(4), C(3)H(3), C(3)H(4), C(4)H(4), C(4)H(5), C(5)H(6), C(5)H(7), and C(6)H(6) were directly observed and provide mechanistic insights to the isoprene pyrolysis. At temperatures >or= approximately 1200 K, the molecular elimination of ethene to form C(3)H(4) and sigma bond homolysis producing C(4)H(5) and CH(3) radicals are competitive reaction pathways. The molecular elimination of acetylene to form C(3)H(6) was minimal and direct C(2)-C(3) sigma bond homolysis was not observed. The C(3)H(3) radicals are also observed, as a result of hydrogen loss of C(3)H(4) by pyrolysis or hydrogen abstraction by the CH(3) radical from C(3)H(4). Above approximately 1250 K, production of C(6)H(6) was observed and identified as the combination product of the C(3)H(3) radicals.     

Photoionization Mass Spectrometric and Kinetic Modeling of Low-pressure Pyrolysis of Benzene (cited: 3)

Pyrolysis of benzene at 30 Torr was studied from 1360 K to 1820 K in this work. Synchrotron vacuum ultraviolet photoionization mass spectrometry was employed to detect the pyroly-sis products such as radicals, isomers and polycyclic aromatic hydrocarbons, and measure their mole fraction profiles versus temperature. A low-pressure pyrolysis model of benzene was developed and validated by the experimental results. Rate of production analysis was performed to reveal the major reaction networks in both fuel decomposition and aromatic growth processes. It is concluded that benzene is mainly decomposed via H-abstraction reaction to produce phenyl and partly decomposed via unimolecular decomposition reac-tions to produce propargyl or phenyl. The decomposition process stops at the formation of acetylene and polyyne species like diacetylene and 1,3,5-hexatriyne due to their high thermal stabilities. Besides, the aromatic growth process in the low-pressure pyrolysis of benzene is concluded to initiate from benzene and phenyl, and is controlled by the even carbon growth mechanism due to the inhibited formation of C5 and C7 species which play important roles in the odd carbon growth mechanism.     

Hydrogen Abstraction/Acetylene Addition Revealed

For almost half a century, polycyclic aromatic hydrocarbons (PAHs) have been proposed to play a key role in the astrochemical evolution of the interstellar medium (ISM) and in the chemistry of combustion systems. However, even the most fundamental reaction mechanism assumed to lead to the simplest PAH naphthalene—the hydrogen abstraction–acetylene addition (HACA) mechanism—has eluded experimental observation. Here, by probing the phenylacetylene (C₈H₆) intermediate together with naphthalene (C₁₀H₈) under combustion‐like conditions by photo‐ionization mass spectrometry, the very first direct experimental evidence for the validity of the HACA mechanism which so far had only been speculated theoretically is reported.     

平朔煤热解过程中PAHs的释放特性

利用热解-气质联用仪(PY-GC-MS)研究了平朔煤在不同热解温度下多环芳烃(PHAs)的释放规律,并探讨了该过程中PAHs的生成机理。研究结果表明,16种PAHs的生成总量随着热解温度的升高先增大后减少,在800℃达到最大值。且PAHs环数分布规律对热解温度具有显著的依赖性,不同环数的PAHs,其最大生成量时所对应的热解温度亦不同。随着热解温度的升高,煤结构中的桥键、芳香环上的脂肪侧链以及较难断裂的甲基、酚羟基等依次断裂,使得PAHs的生成量不断增加,当温度升高至1 000、1 200℃时,伴随着缩合反应加剧,大环PAHs的生成量继续增加。由总体趋势看出,平朔煤大分子网络结构的热裂解主要发生在600~800℃,热解缩合反应主要发生在高温下。平朔煤热解过程中的PAHs除小部分来自煤中可萃取的芳烃结构挥发外,主要来自煤中大分子芳香结构裂解以及热解生成自由基碎片的高温聚合。     

Time-resolved molecular beam mass spectrometry of the initial stage of particle formation in an Ar/He/C2H2 plasma

The temporal evolution of the neutral plasma chemistry products in a capacitively coupled plasma from argon/helium/acetylene is followed via molecular beam mass spectrometry with a time resolution of 100 ms. Several chemistry pathways are resolved. (i) The formation of C2nH2 (n = 2-5) molecules proceeds via the following sequence: the production of highly reactive C2H radicals in electron impact dissociation of C2H2 is followed by C2H induced chain polymerization of C2nH2 (n = 1-4). (ii) CnH4 (n = 4, 5, 6) compounds are detected already at an early stage of the discharge excluding polymerization reactions with C2H radical being responsible for their formation. Instead, vinylidene reactions with acetylene or mutual neutralization reactions of ionic species are proposed as sources of their formation. (iii) Surface reactions are identified as the source of C8H6. The measured hydrocarbon molecules represents possible precursors for negative ion formation via dissociative electron attachment reactions and can hence play a crucial role in particle nucleation. On the basis of the comparison of our data with available experimental and modeling results for acetylene plasmas in the literature, we propose C2nH2 (n > 1) molecules as important precursors for negative ion formation.     

The formation of naphthalene, azulene, and fulvalene from cyclic C5 species in combustion: an ab initio/RRKM study of 9-H-fulvalenyl (C5H5-C5H4) radical rearrangements

Chemically accurate ab initio Gaussian-3-type calculations of the C(10)H(9) potential energy surface (PES) for rearrangements of the 9-H-fulvalenyl radical C(5)H(5)-C(5)H(4) have been performed to investigate the formation mechanisms of polycyclic aromatic hydrocarbons (PAHs) originated from the recombination of two cyclopentadienyl radicals (c-C(5)H(5)) as well as from the intermolecular addition of cyclopentadienyl to cyclopentadiene (c-C(5)H(6)) under combustion and pyrolytic conditions. Statistical theory calculations have been applied to obtain high-pressure-limit thermal rate constants, followed by solving kinetic equations to evaluate relative product yields. At the high-pressure limit, naphthalene, fulvalene, and azulene have been shown as the reaction products in rearrangements of the 9-H-fulvalenyl radical, with relative yields depending on temperature. At low temperatures (T < 1000 K), naphthalene is predicted to be the major product (>50%), whereas at higher temperatures the naphthalene yield rapidly decreases and the formation of fulvalene becomes dominant. At T > 1500 K, naphthalene and azulene are only minor products accounting for less than 10% of the total yield. The reactions involving cyclopentadienyl radicals and cyclopentadiene have thus been shown to give only a small contribution to the naphthalene production on the C(10)H(9) PES at medium and high combustion temperatures. The high yields of fulvalene at these conditions indicate that cyclopentadienyl radical and cyclopentadiene more likely represent significant sources of cyclopentafused PAHs, which are possible fullerene precursors. Our results agree well with a low-temperature cyclopentadiene pyrolysis data, where naphthalene has been identified as the major reaction product together with indene. Azulene has been found to be only a minor product in 9-H-fulvalenyl radical rearrangements, with branching ratios of less than 5% at all studied temperatures. The production of naphthalene at low combustion temperatures (T < 1000 K) is governed by the spiran mechanism originally suggested by Melius et al. At higher temperatures, the alternative C-C bond scission route, which proceeds via the formation of the cis-4-phenylbutadienyl radical, is competitive with the spiran pathway. The contributions of the previously suggested methylene walk pathway to the production of naphthalene have been calculated to be negligible at all studied temperatures.     

Dynamics simulation and reaction pathway analysis of characteristics of soot particles in ethylene oxidation at high temperature

Soot particles characteristics were investigated numerically for high temperature oxidation of C₂H₄/O₂/N₂ (C/O ratio of 2.2) in a closed jet-stirred/plug-flow reactor (JSR/PFR) system. Based on the growth mechanism of polycyclic aromatic hydrocarbons (PAHs), two mechanisms were used to explore the formation pathways of soot precursors and soot. Numerical results were compared with the experimental and reference data. The simulation results show that the value predicted for small molecule intermediates within A1 gives a strong regularity, consistent trend with reference data. However, with the hydrogen-abstraction-carbon-addition (HACA) growth mechanism, the predicted value for beyond-A1 PAH macromolecules and soot volume fraction are smaller than the experimental data. The results also show that the predicted soot volume fraction is in good agreement with experimental data when a combination of the HACA and PAHs condensation (HACA + PAH-PAH) growth mechanisms is used. Analyses of the A1 sensitivity and reaction pathway elucidated that A1 are mainly formed from C₂H₃, C₂H₂, C₃H₃, C₆H₅OH, A1C₂H and A1-. The reaction 2C₃H₃ → A1 is the dominant route of benzene formation. The prediction results and an analysis of the A3 reaction pathway indicate that the growth process from benzene to larger aromatic hydrocarbons (beyond two-ring polycyclic aromatic hydrocarbons [PAHs]) goes by two pathways, i.e., HACA combined with the PAH-PAH radical recombination and addition reaction growth mechanisms.     

Synthesis of Polycyclic Aromatic Hydrocarbons by Phenyl Addition–Dehydrocyclization: The Third Way

Polycyclic aromatic hydrocarbons (PAHs) represent the link between resonance‐stabilized free radicals and carbonaceous nanoparticles generated in incomplete combustion processes and in circumstellar envelopes of carbon rich asymptotic giant branch (AGB) stars. Although these PAHs resemble building blocks of complex carbonaceous nanostructures, their fundamental formation mechanisms have remained elusive. By exploring these reaction mechanisms of the phenyl radical with biphenyl/naphthalene theoretically and experimentally, we provide compelling evidence on a novel phenyl‐addition/dehydrocyclization (PAC) pathway leading to prototype PAHs: triphenylene and fluoranthene. PAC operates efficiently at high temperatures leading through rapid molecular mass growth processes to complex aromatic structures, which are difficult to synthesize by traditional pathways such as hydrogen‐abstraction/acetylene‐addition. The elucidation of the fundamental reactions leading to PAHs is necessary to facilitate an understanding of the origin and evolution of the molecular universe and of carbon in our galaxy.