Surface-enhanced Raman scattering of EDOT and PEDOT on silver and gold nanoparticles

Surface-enhanced Raman scattering (SERS) spectra of the conducting polymer poly(3,4-ethylenedioxythiophene) (PEDOT) and its monomer 3,4-ethylenedioxythiophene (EDOT) on Ag and Au nanoparticles presenting different morphologies and stabilizing agents have been obtained using the excitation radiation at 633 nm. The SERS spectra of the monomer and polymer are strongly dependent both on the metal and capping agent of the substrate. SERS spectra of EDOT on Au nanospheres indicates that adsorption occurs with the thiophene ring perpendicular to the metal surface. In contrast, polymerization takes place on the silver surface of Ag nanospheres. EDOT adsorption on Ag nanoprisms with polyvinylpyrrolidone (PVP) as capping agent occurs similarly to that observed on gold. Surface-enhanced resonance Raman scattering (SERRS) spectra of PEDOT on gold nanostars that present a thick layer of PVP show no chemical interaction of PEDOT with the metal surface; however, when PEDOT is adsorbed on citrate stabilized gold nanospheres, the SERRS spectra suggest that thiophene rings are perpendicular to the surface. Oxidation of PEDOT also is observed on Ag nanospheres. The investigation of the interface between PEDOT and metal surface is crucial for the development in polymer-based optoelectronic devices since this interface plays a crucial role in their stability and performance.     

Imparting Multifunctionality by Utilizing Biporosity in a Zirconium-Based Metal–Organic Framework

In this work, we have synthesized nanocomposites made up of a metal–organic framework (MOF) and conducting polymers by polymerization of specialty monomers such as pyrrole (Py) and 3,4-ethylenedioxythiophene (EDOT) in the voids of a stable and biporous Zr-based MOF ( UiO-66 ). FTIR and Raman data confirmed the presence of polypyrrole ( PPy ) and poly3,4-ethylenedioxythiophene ( PEDOT ) in UiO-66-PPy and UiO-66-PEDOT nanocomposites, respectively, and PXRD data revealed successful retention of the structure of the MOF. HRTEM images showed successful incorporation of polymer fibers inside the voids of the framework. Owing to the intrinsic biporosity of UiO-66 , polymer chains were observed to selectively occupy only one of the voids. This resulted in a remarkable enhancement (million-fold) of the electrical conductivity while the nanocomposites retain 60–70 % of the porosity of the original MOF. These semiconducting yet significantly porous MOF nanocomposite systems exhibited ultralow thermal conductivity. Enhanced electrical conductivity with lowered thermal conductivity could qualify such MOF nanocomposites for thermoelectric applications.     

PEDOT∶PSVMA/AuNPs导电墨水的合成及应用

本文以苯乙烯磺酸钠(SS)、7-(4-乙烯基苄氧基)-4-甲基香豆素(VM)和丙烯酸(AA)作为反应单体,合成了一种光敏性双亲共聚物PSVMA,利用1 HNMR与UV-Vis光谱对其结构和组成进行了表征。以PSVMA作为软模板和掺杂剂,氯金酸作为氧化剂,通过化学氧化法聚合得到水分散的PEDOT∶PSVMA/AuNPs导电复合物,平均粒径是66.7±0.5nm。将其作为基础墨水,调节配方制得了PEDOT∶PSVMA/AuNPs喷墨打印墨水,分别以相纸和PET膜为基材制得了图案化的柔性导电膜,该柔性导电膜具有较好的导电性,经紫外光引发导电膜中的香豆素基团二聚后,其耐水性大大提高。     

Electrochromic enhancement of poly(3,4‐ethylenedioxythiophene) films functionalized with hydroxymethyl and ethylene oxide

2‐((2,3‐Dihydrothieno[3,4‐b]dioxin‐2‐yl)methoxy)methyl oxirane (EDOT‐MO) was successfully synthesized by the reaction of epichlorohydrin with hydroxymethylated‐3,4‐ethylenedioxylthiophene (EDOT‐MeOH), which was synthesized via a simple four‐step sequence. Poly(hydroxymethylated‐3,4‐ethylenedioxylthiophene) (PEDOT‐MeOH) and poly(2‐((2,3‐dihydrothieno[3,4‐b]dioxin‐2‐yl)methoxy)methyl oxirane) (PEDOT‐MO) were electrosynthesized through electropolymerization of EDOT‐MeOH and EDOT‐MO, respectively. Structural, electrochemical, optical, and thermal properties of as‐formed polymers were investigated by FTIR, cyclic voltammetry, UV–vis, and thermogravimetry. Spectroelectrochemistry studies demonstrated that PEDOT‐MeOH and PEDOT‐MO could be reversibly oxidized and reduced accompany with obvious color changes. Further kinetic studies demonstrated that the introduction of hydroxymethyl or ethylene oxide group significantly improved electrochromic properties of 3,4‐ethylenedioxythiophene (PEDOT) and resulted in high contrast ratios (57.3% at 585 nm) and coloration efficiencies (338.5 cm² C^?1), low switching voltages, and fast response time. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1989–1999     

Polymer films on electrodes: investigation of ion transport at poly(3,4-ethylenedioxythiophene) films by scanning electrochemical microscopy

Electropolymerization, morphology characterization, and ion transport of poly(3,4-ethylenedioxythiophene) (PEDOT) films doped with different counterions (chloride, ferrocyanide (FCN), and poly(p-styrenesulfonate) (PSS-)) on a platinum electrode were investigated using scanning electrochemical microscopy (SECM) during both potential step (chronocoulometric) and cyclic voltammetric scans. An ultramicroelectrode (UME) tip was positioned close to the surface of a PEDOT-modified substrate electrode, and the responses of both electrodes to a substrate potential step or linear sweep were monitored simultaneously. Chloride or ferrocyanide (FCN) ejection during PEDOT reduction was shown to be a function of the reduction potential. The nature of the cation in the bulk solution was not found to be important in the kinetics of ion transport in PEDOT+/FCN- films. Direct evidence for the incorporation of cations of Ru(NH3)6(3+/2+) in a PEDOT film during its reduction was also obtained by SECM measurements. The adsorption of Ru(NH3)6(3+) in fully oxidized PEDOT+/PSS- films was observed and attributed to ion exchange between the Na+ co-ion of PSS- and Ru(NH3)6(3+) in the bulk solution.     

Electrocatalytic Acitivity of rGO/PEDOT : PSS Nanocomposite towards Methanol Oxidation in Alkaline Media

Increasing demand of alternative energy sources leads to the development of new electrocatalytic materials for fuel cells. In present work, we report the synthesis of rGO/PEDOT : PSS (reduced graphene oxide/ Poly (3,4‐ethylenedioxythiophene) : Polystyrene sulfonate) nanocomposite by in‐situ polymerization method using EDOT as precursor and the nanocomposite is used as anode catalyst for methanol oxidation. Structural and chemical characterizations such as XRD, FTIR and Micro‐Raman confirm the formation of the nanocomposite. From TEM image, growth of nanofibrous PEDOT : PSS on rGO nanosheets is observed. Electrochemical characterizations of rGO/PEDOT : PSS/ITO electrode are performed by Cyclic Voltammetry (CV), Electrochemical Impedance Spectroscopy (EIS) and Chronoamperometry (CA) measurements. Methanol oxidation reactions are performed in 0.5 M NaOH solution. The anodic current of the nanocomposite coated ITO is found be 37.5 mA at 0.59 V due to methanol electro‐oxidation and retentivity of the electrode is 92 % of initial scan after 800 cycles. The chronoamperometric results reveal that the nanocomposite modified electrode exhibits better stability with retention factor of 42.4 % up to 3000 seconds. The rGO/PEDOT : PSS/ITO electrode exhibits enhanced electrocatalytic activity towards methanol oxidation reaction due to larger surface area and excellent conductivity of rGO nanosheet.     

A Conjugated Copolymer Bearing Imidazolium-based Ionic Liquid:Electrochemical Synthesis and Electrochromic Properties

An imidazolium-based ionic liquid(IL) modified triphenylamine derivative,namely 1-(4-((4-(diphenylamino)benzoyl) oxy)butyl)-3-methyl imidazole tetrafluoroborate(TPAC_6 IL-BF_4),was designed and synthesized,and further applied with 3,4-ethylene dioxythiophene(EDOT)to prepare conjugated copolymer P(EDOT:TPAC_6 IL-BF_4) via electrochemical polymerization.The cyclic voltammetry curves show that the copolymer P(EDOT:TPAC_6 IL-BF_4) possesses two pairs of redox peaks,which should be ascribed to the redox behaviors of EDOT and triphenylamine.The ultraviolet-visible(UV-Vis) absorption spectrum of P(EDOT:TPAC_6 IL-BF_4) exhibits one maximum absorption peak at 580 nm and a small shoulder characteristic peak at 385 nm under neutral state which are assigned to π-π~* conjugated structure of EDOT and triphenylamine.After being applied at the positive voltage,the copolymer color changes from dark blue to light blue,which is close to the color of poly(3,4-ethylenedioxythiophene)(PEDOT).Surprisingly,the copolymer P(EDOT:TPAC_6 IL-BF_4) shows shorter switching time of 0.37 s,0.30 s at 580 nm and 0.38 s,0.45 s at 1100 nm compared with PEDOT.It is more intriguing that the copolymer P(EDOT:TPAC_6 IL-BF_4) exhibits electrochromism even in free supporting electrolyte.The results confirm that the existence of imidazolium-based ionic liquid has an improvement on the ion diffusion properties and the switching time of conjugated polymer,which may provide a potential direction for the preparation of high-performance electrochromic materials.     

Enhancing electrochromic properties of conducting polymers via copolymerization: Copolymer of 1‐(4‐fluorophenyl)‐2,5‐di(thiophen‐2‐yl)‐1H‐pyrrole with 3,4‐ethylene dioxythiophene

A copolymer of 1‐(4‐fluorophenyl)‐2,5‐di(thiophen‐2‐yl)‐1H‐pyrrole (FPTP) with 3,4‐ethylene dioxythiophene (EDOT) was electrochemically synthesized and characterized. While poly(FPTP) (P(FPTP)) has only two colors in its oxidized and neutral states (blue and yellow), its copolymer with EDOT has five different colors (purple, red, light gray, green, and blue). Electrochromic devices based on P(FPTP‐co‐EDOT) and poly(3,4‐ethylenedioxythiophene) (PEDOT) were constructed and characterized. The oxidized state of the device shows blue color whereas it shows purple for the reduced state. At several potentials the device has good transparency with green and gray colors. Maximum contrast (Δ%T) and switching time of the device were measured as 23% and 1.1 s at 555 nm. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4496–4503, 2007     

Spectrophotometric Determination of Nitrogen Dioxide <Nitrite>

Abstract

A highly sensitive spectrophotometric method has been developed for the determination of nitrogen dioxide (nitrite as NO_z ^?) by reacting manganese dioxide in 1:20 perchloric acid. An amount of manganese dioxide (MnO_z) equivalent to the concentration of nitrogen dioxide becomes soluble due to the reduction of Mn (IV) to Mn (II) by nitrite in acidic medium. The soluble Mn (II) ion is filtered to remove excess of MnO₂ and is oxidized to permanganate ion by periodic acid in presence of phosphoric acid. The violet colored solution shows maximum absorbance at 525 nm. The sensitivity of the method is 0.08 ppm based on 0.0044 absorbance, and Beer's law is obeyed in the concentration range of 0.2 to 10.0 μg/mL of NO₂ ^?. Molar absorbance is found to be 2442 at 525 nm.

In the present investigation NO₂ ^? was treated with excess of MnO₂ in 1:20 perchloric acid where NO₂ ^? reduces equivalent amount of Mn (IV) to Mn (II) and becomes soluble. The soluble Mn (II) was heated to boiling and 25 mg (approx.) periodic acid is added and cooled. The volume of each solution is made to 50 mL in volumetric flask. Reagent blank is prepared in similar way except sodium nitrite solution. The absorbance is measured at 525 nm against reagent blank.     

组装在贵金属基底上的金纳米粒子对CO的电化学催化氧化

研究了组装在Au, Pt电极表面的金纳米粒子对CO的电化学催化氧化行为, 首次在实验上观察到较大粒径金纳米粒子(粒径＞10 nm)对CO的电催化氧化活性. 考察了金粒子表面金氧化物对粒子电催化活性的影响, 发现表面金氧化物的形成是金纳米粒子对CO具有电催化氧化活性的前提. 对于相同粒径的金纳米粒子, 随着粒子表面金氧化物量的增加,催化活性增大.     

Understanding droplet bridging in ionic liquid-based Pickering emulsions

Copper nanoparticles are prepared in aqueous solution by reducing copper ions with hydrazine hydrate in the presence of cetyl trimethylammonium bromide (CTAB) and polyvinylpyrrolydone (PVP) as stabilizers. With only CTAB was used as stabilizer, copper nanoparticles are aggregated and partially oxidized to Cu(2)O. When both PVP and CTAB were used, dispersed copper nanoparticles with 56 nm diameter were obtained. Copper nanoparticles are simply mixed with poly (3,4-ethylenedioxythiophene)/poly(styrenesulfonate) (PEDOT/PSS) in aqueous solution to form conducting composite. The effect of copper weight percent and surfactants on the conductivity and stability of the composite has been investigated.     

Biosynthesis and characterization of gold nanoparticles produced by laccase from Paraconiothyrium variabile

During recent years investigation on the development of eco-friendly processes for production of gold nanoparticles (GNPs) have received much attention due to hazardous effects of chemical compounds used for nanoparticle preparation. In the present study, the purified laccase from Paraconiothyrium variabile was applied for synthesis of Au nanoparticles (AuNPs) and the properties of produced nanoparticles were characterized. The UV-vis spectrum of formed AuNPs showed a peak at 530 nm related to surface plasmon absorbance of GNPs represented the formation of gold nanoparticles after 20 min incubation of HAuCl(4) (0.6 mM) in the presence of 73 U laccase at 70°C. Transmission electron microscopy (TEM) image of AuNPs showed well dispersed nanoparticles in the range of 71-266 nm as determined by the laser light scattering method. The pattern of energy dispersive X-ray (EDX) of the prepared GNPs confirmed the structure of gold nanocrystals.     

Co-effect of soft template and microwave irradiation on morphological control of gold nanobranches

Short-range order sodium dodecyl sulfate (SDS)-bound micelles and long-range order poly(vinylpyrrolidone) (PVP)?CSDS supramolecular assemblies in PVP?CSDS aqueous solution illustrate the potential template application in directing hierarchical assembly of inorganic nanostructure. In this paper, ginger-like Au nanobranches with equivalent circle diameter around 50?nm were prepared in PVP?CSDS aqueous solution under microwave irradiation through a one-pot, facile, rapid, and morphology-controlled synthesis route. Based on the experimental results, the possible growth mechanism of the ginger-like gold nanobranches is inferred to be a template-mediated and microwave-assisted hierarchical assembly via the unique co-effect of PVP?CSDS soft template and microwave irradiation. At first, the precursors AuCl ₄ ^? surrounding the SDS-bound micelles were rapidly reduced to Au⁰ by sodium citrate assisted by microwave irradiation and simultaneously assembled into abundant Au nanocrystals with diameters around 10?nm according to the bound micelle templates. And then several tiny Au nanocrystals linked by PVP chains within a limited space were instantly mediated by the long-range order PVP?CSDS supramolecular assemblies to fabricate into polycrystal ginger-like Au nanobranches. X-ray diffraction (XRD) pattern indicates that the Au nanobranches are face-centered cubic phase, which is verified by high-resolution transmission electron microscopy (HRTEM) images and selected area electron diffraction (SAED) pattern.     

Synthesis and microwave absorbing properties of poly(3,4‐ethylenedioxythiophene) (PEDOT) microspheres

Poly(3,4‐ethylenedioxythiophene) (PEDOT) solid and hollow microspheres were successfully synthesized by simply adjusting the concentration of 3,4‐ethylenedioxythiophene (EDOT) and the molar ratio of EDOT to ammonium persulfate (APS) (represented by (EDOT)/(APS)), respectively. Microwave absorbing properties of PEDOT microspheres with tunable reflection loss (RL) and microwave frequency band were described in detail. The relationships between the conductivity and RL of PEDOT microspheres were also discussed. Copyright © 2010 John Wiley & Sons, Ltd.     

石墨烯/聚3，4-乙烯二氧噻吩复合物的电化学制备及其在超级电容器中的应用

首次提出了一种在离子液体中在石墨烯表面用恒电流法聚合3,4-乙烯二氧噻吩(EDOT)单体制备石墨烯/聚3,4-乙烯二氧噻吩(石墨烯/PEDOT)复合物的方法。用原子力显微镜、扫描电镜等技术表征证明石墨烯/PEDOT复合物是由PEDOT纳米谷粒状颗粒分散在石墨烯片表面而组成的。将该复合物用作超级电容器电极材料时,在1.0 A.g-1的充放电比电流下得到的比电容值为181 F.g-1。同时,该材料还显现出较好的充放电可逆性和稳定性。     

FeS2−AuNPs Nanocomposite as Mimicking Enzyme for Constructing Signal‐off Sandwich‐type Electrochemical Immunosensor Based on Electroactive Nickel Hexacyanoferrate as Matrix

In this work, a novel sandwich‐type electrochemical immunosensor with electroactive nickel hexacyanoferrate nanoparticles (NiHCFNPs) as matrix was constructed for α‐fetoprotein (AFP) detection in a signal‐off manner by using FeS₂?AuNPs nanocomposite catalyzed insoluble precipitation to significantly inhibit the electrochemical signal. Initially, the NiHCFNPs with excellent electrochemical property was modified on the electrodeposited nano‐Au electrode to obtain a strong initial electrochemical signal. Subsequently, another nano‐Au layer was formed for immobilization of capture antibody (Ab₁). In the presence of target AFP, the prepared FeS₂?AuNPs‐Ab₂ bioconjugate could be specifically recognized and immobilized on electrode through the sandwich‐type immunoreaction. The FeS₂ with large specific surface areas were used as scaffolds to load abundant mimicking enzyme AuNPs. With the help of hydrogen peroxide (H₂O₂), FeS₂?AuNPs with peroxidase‐like activity accelerated the 4‐chloro‐1‐naphthol (4‐CN) oxidation with generation of insoluble precipitation on electrode, which would greatly hinder the electron transfer and thus caused the decrease of electrochemical signal for quantitative determination of AFP. This approach achieved a wide dynamic linear range from 0.0001 to 100 ng mL^?1 with an ultralow limit detection of 0.028 pg mL^?1. Especially, the proposed AFP immunosensor can be applied to detect human serum samples with satisfactory results, indicating a potential application in clinical monitoring of tumor biomarkers.     

A sensitive and rapid UV–vis spectrophotometry for organophosphorus pesticides detection based on Ytterbium (Yb3+) functionalized gold nanoparticle

AuNPs possess oxygen-containing functional groups and strong complexation reaction with Yb3+. While oxygen-containing thiophosphate in the OPs molecule can combine with Yb³⁺ as a cross-linking molecule to produce insoluble yetterbium phosphate, resulting in the aggregation of AuNPs and great decrease in ultraviolet absorbance strength at 520 nm by ultraviolet visible (UV-vis) spectrophotometer.     

Change Color Effect and Spectral Properties of Gold Nanoparticle-cationic Surfactants System

The change color effect of gold nanoparticle solutions was studied by means of resonance scattering and absorption spectrometry and scan electron microscopy. The red Au nanoparticles with a size of 10 nm exhibit a resonance absorption peak and a resonance scattering peak all at 525 nm. After some inorganic electrolyte was added to a red Au nanoparticles solution, the color of the solution became blue and the absorbance at 600-700 nm was significantly increased. The ratio of the concentration of rnonovalent cations, at which the resonance scattering of the system at 525 nm is maximal to that of divalent cations, is in the range of 100 : 1--100 ; 1. 8. It is in good agreement with the Schulze-Hardy rule of the coagulation value of electrolyte. After adding some cationic surfactants to the above solution, the color of the solution is in deep blue, with two resonance absorption peaks at 550 and 680 nm, and a greatly enhanced resonance scattering peak at 525 nm. The experiments demonstrate that the stronger the hydrophobicity of the cationic surfactant is, the stronger the change color effect of the Au nanoparticle solution promoted by cationic surfactant is. The change color effect of Au nanoparticle solution is resulted from the increased diameter of Au nanoparticles, and the changes of resonance absorotion DeaR and resonance scattering.     

Interaction between sodium dodecyl sulfate (SDS) and polyvinylpyrrolidone (PVP) investigated with forward and reverse component addition protocols employing tensiometric, conductometric, microcalorimetric, electrokinetic, and DLS techniques

The interaction between polyvinylpyrrolidone (PVP) and sodium dodecyl sulfate (SDS) after the procedure of addition of the surfactant to polymer and the reverse procedure of addition of polymer to SDS micelles has been studied by tensiometric, conductometric, and microcalorimetric methods. The results have been analyzed and correlated with reference to SDS interfacial adsorption, association, and binding to PVP. Two aggregation states of SDS in presence of PVP have been found. The enthalpies of formation of SDS aggregates/micelles and their binding to the polymer have been evaluated. The interaction of PVP with SDS at concentrations below its critical micellar concentration (CMC) and above have evidenced distinctions. The forward addition protocol (FAP, SDS addition to PVP) and reverse addition protocol (RAP, PVP addition to SDS) have shown similarities and differences. Electrokinetic measurements have evidenced the interacted (SDS–PVP) colloidal products to possess negative zeta potential in the range of −39 to −65 mV. The hydrodynamic diameters of the PVP–SDS dispersion obtained from DLS measurements have ranged between 60 and 160 nm. Both zeta potential and hydrodynamic diameter have depended on [SDS] showing a maximum for the former at twice the critical micellar concentration of SDS.     

Size-specific catalytic activity of polymer-stabilized gold nanoclusters for aerobic alcohol oxidation in water

Gold nanoclusters (phi = 1.3 nm) stabilized by poly(N-vinyl-2-pyrrolidone) (Au:PVP NCs) readily oxidize benzylic alcohols to the corresponding aldehydes and/or carboxylic acids under ambient temperature in water. Kinetic measurement revealed that smaller Au:PVP NCs exhibit higher catalytic activity than larger (9.5 nm) homologues and, more surprisingly, than Pd:PVP NCs of comparable size (1.5 and 2.2 nm). On the basis of the marked difference in the kinetic isotope effect and activation energy between Au:PVP and Pd:PVP NCs, a reaction mechanism for alcohol oxidation catalyzed by Au:PVP NCs is proposed in which a superoxo-like molecular oxygen species adsorbed on the surface of the small Au NCs abstracts a hydrogen atom from the alkoxide.