分级微纳结构TiO2空心球的制备及其在DSSC中的应用

以钛酸四丁酯为钛源,无水乙醇为溶剂,通过碳球模板法制备出直径为200nm、壳厚20～25nm的TiO2空心球（HS）.通过X射线衍射（XRD）、透射电子显微镜（TEM）、扫描电子显微镜（SEM）和N2吸附脱附等对产物的形貌、晶相组成、孔结构和紫外-可见光谱性质进行了表征,结果显示所制备的锐钛矿相TiO2空心微球是由初级结构纳米级TiO2晶粒构成的.将这种TiO2空心球应用于染料敏化太阳电池（DSSC）领域可以提高光阳极对光的散射.通过制备P25/HS-TiO2双层膜电极,相比单纯的P25纳米晶电极（Jsc=13.5mAcm？2,Voc=0.653V,FF=0.53,η=4.95%）可以得到更高的光电转化效率（Jsc=15.79mAcm？2,Voc=0.653V,FF=0.55,η=6.66%）.     

Synthesis, characterization, and optical properties of well-defined N-doped, hollow silica/titania hybrid microspheres

Well-defined nitrogen-doped, hollow SiO2/TiO2 hybrid spheres were successfully prepared through a two-step sol-gel synthesis combined calcination process using triethylamine as the nitrogen source. In this approach, polystyrene (PS)/silica microspheres were first synthesized. Subsequently, the amine-treated PS/SiO2/TiO2 hybrid spheres were obtained by sol-gel method. Finally, the elimination of the PS core, nitrogen-doping process, and crystallization of amorphous TiO2 were simultaneously conducted in the calcination process to acquire the final products. The as-prepared hybrid spheres were characterized by scanning electron microscopy, transmission electron microscopy, X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and Fourier transform infrared (FTIR) spectroscopy. The results of XRD, FTIR, and XPS spectra indicated that nitrogen was really doped into the anatase TiO2 shell and confirmed that most nitrogen dopants might be present in the chemical environments of N-Ti-O and Ti-N-O. It was found that the absorption shoulder of nitrogen-doped hollow SiO2/TiO2 hybrid spheres vastly shifted to the visible region up to around 530 nm. The photoluminescence (PL) bands showed spectral lines at about 421, 472, and 529 nm, which were attributed to the self-trapped excitons, F and F+ centers. Moreover, the intensity of the PL spectra band of hollow SiO2/TiO2 hybrid spheres increased with as the amount of titanium tetrabutoxide (TBOT) precursor increased. However, the doping of nitrogen into hollow SiO2/TiO2 hybrid spheres led to the drastic quenching of photoluminescence because of the increase in the separation efficiency of the photoinduced electron and hole pairs.     

TiO2/SnO2复合空心球在染料敏化太阳能电池中的应用

采用模板辅助法制备了SnO2/TiO2复合空心球,样品直径为1.5~4.0μm,比表面积达到了92.9 m^2·g^-1,复合空心球表现出优越的光散射性能.以这种复合空心球作为染料敏化太阳能电池的光阳极,电池的光电转换效率可达到7.72%,高于SnO2微米球(2.70%)和TiO2微米球(6.26%).此外,以锐钛矿型TiO2纳米晶作为底层,SnO2/TiO2复合空心球作为光散射层制备的双层结构光阳极,电池光电转换效率进一步提升至8.43%.     

中空TiO_2微球的制备及对聚丙烯酸酯薄膜性能的影响

采用阳离子聚苯乙烯微球作为模板,钛酸四丁酯为钛源,氨水为催化剂,制备了中空TiO_2微球.采用X射线衍射、扫描电镜及比表面测定仪对其形貌和结构进行了表征,并考察了模板粒径、钛源用量以及催化剂用量对中空TiO_2微球形貌的影响.通过物理共混法将其引入至聚丙烯酸酯乳液中并成膜,研究了复合薄膜的保温性能、抗紫外性能及力学性能.结果表明,锐钛矿相中空TiO_2微球模板粒径、钛源用量以及催化剂用量影响中空TiO_2微球的空心尺寸、壁厚及壳层致密性.中空TiO_2微球可显著提升聚丙烯酸酯薄膜的保温性能、抗紫外性能和力学性能.采用不同粒径的模板制备的中空TiO_2微球对复合薄膜的各项性能均有影响,其中模板粒径为140 nm时复合薄膜性能最优,光反射率提升63%,导热系数降低27%,且在波长小于360 nm范围内,紫外透过率几乎为0,抗张强度增加100%,断裂伸长率提升62%.     

Control of TiO2 structures from robust hollow microspheres to highly dispersible nanoparticles in a tetrabutylammonium hydroxide solution

A new process for controlling the structure of TiO2 from hollow microspheres to highly dispersible nanoparticles has been developed by altering the concentration of tetrabutylammonium hydroxide (TBAH) in the solvothermal reaction of titanium isopropoxide. Robust and size-controllable hollow TiO2 microspheres, constructed by the assembly of 18 nm TiO2 nanoparticles, were synthesized at relatively high TBAH concentration. The diameters of hollow spheres, with a shell thickness of approximately 250 nm, were controlled to 1.5-4 microm by varying the concentration of TBAH in the range of 0.1-0.5 M. After calcination at 450 degrees C, the hollow microspheres were not appreciably deformed and were still floating on the surface of the water. However, highly dispersible TiO2 nanoparticles with an average diameter of 13 nm were obtained at a low TBAH concentration such as 9.2 mM. The colloidal particle size of TiO2 in an aqueous suspension at pH 2 was 12.5-13.5 nm, which indicates that the each nanoparticle is completely separated. The overall procedure is simple and highly reproducible, and large-scale synthesis is available at low cost.     

Long TiO2 hollow fibers with mesoporous walls: sol-gel combined electrospun fabrication and photocatalytic properties

Long TiO2 hollow fibers with mesoporous walls have been fabricated with the sol-gel combined two-capillary spinneret electrospinning technique using a triblock copolymer (Pluronic, P123, (H(C2H5O)20(C3H7O)70 (C2H5O)20OH) as a pore-directing agent. The as-prepared hollow fibers were as long as 30 cm with an outer diameter of 0.1-4 microm and wall thickness of 60-500 nm. The diameters and wall thicknesses of the hollow fibers could be tuned by adjusting the electrospinning parameters. The fiber walls were composed of mesopores 6.7 nm in diameter as calculated from the N2 adsorption/desorption isotherm. The high-resolution TEM (HR-TEM) images exhibited that the mesopores were hexagonally aligned with a low order because of the curving of the pores. When comparing with other nanostructured TiO2 materials such as commercial TiO2 nanoparticles (P25, Degussa) and mesoporous TiO2 powders, the hollow fibers exhibited higher photocatalytic activities toward degradation of methylene blue and gaseous formaldehyde.     

SnO2 hollow nanospheres assembled by single layer nanocrystals as anode material for high performance Li ion batteries

SnO₂ hollow nanospheres were successfully synthesized via a facile one-step solvothermal method.Characterizations show that the as-prepared SnO₂ spheres are of hollow structure with a diameter at around 50 nm,and especially,the shell of the spheres is assembled by single layer SnO₂ nanocrystals.The surface area of the material reaches up to 202.5 m²/g.As an anode material for Li ion batteries,the sample exhibited improved electrochemical performance compared with commercial SnO₂ particles.After cycled at high current rate of 0.5 C,1 C and 0.5 C for 20 cycles,respectively,the electrode can maintain a capacity of 509 mAh/g.The suitable shell thickness/diameter ratio endows the good structural stability of the material during cycling,which promises the excellent cycling performance of the electrode.The large surface area and the ultra thin shell ensure the high rate performance of the material.     

The formation of mesoporous TiO2 spheres via a facile chemical process

The mesoporous TiO(2) solid and hollow spheres have been synthesized via a controllable and simple chemical route. Structural characterization indicates that these TiO(2) mesoporous spheres after calcined at 500 degrees C have an obvious mesoporous structure with the diameters of 200-300 nm for solid spheres and 200-500 nm for hollow spheres. The average pore sizes and BET surface areas of the mesoporous TiO(2) solid and hollow spheres are 6.8, 7.0 nm and 162, 90 m(2)/g, respectively. Optical adsorption investigation shows that TiO(2) solid and hollow spheres possess a direct band gap structure with the optical band gap of 3.68 and 3.75 eV, respectively. A possible formation mechanism for TiO(2) solid and hollow spheres is discussed.     

Hierarchical twin-scale inverse opal TiO2 electrodes for dye-sensitized solar cells

We describe the preparation of three-dimensional hierarchical twin-scale inverse opal (ts-IO) electrodes for dye-sensitized solar cells (DSSCs). The ts-IO TiO(2) structure was obtained from a template fabricated via the assembly of mesoscale colloidal particles (40-80 nm in diameter) in the confined geometry of a macroporous IO structure. The photovoltaic properties of ts-IO electrodes were optimized by varying the layer thickness or the size of mesopores in the mesoscale colloidal assembly. Electron transport was investigated using impedance spectroscopy. The result showed that due to the competing effects of recombination and dye adsorption, the maximum efficiency was observed at an electrode thickness of 12 μm. The electrodes of smaller mesopores diameters yielded the higher photocurrent density due to the decrease in the electron transport resistance at the TiO(2)/dye interface. A maximum efficiency of 6.90% was obtained using an electrode 12 μm thick and a mesopore diameter of 35 nm.     

同轴静电纺丝法在纳米中空Ti02纤维中填充Ag的应用

以聚乙烯吡咯烷酮(PVP)溶胶,钛酸四正丁酯和PVP溶胶,银颗粒为前驱体,以共轴静电纺丝法制备了银填充的TiO2中空纳米纤维.将双组分纤维在200℃下热处理去除乙醇与表面吸附水后,继而在空气气氛中焙烧至600℃.可以得到在内表面上沉积银颗粒的TiO2纳米管,银颗粒的直径为5-40 nm,TiO2纳米管的外径150-300 nm.管臂厚10-20 nm.用红外吸收光谱(IR)、X射线衍射(XRD)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)等测试手段对超细纤维进行了表征.中空纤维的直径和管壁可以通过改变电纺参数来调节.与Ag-TiO2纳米纤维、TiO2纳米中空纤维、TiO2纳米纤维及TiO2纳米粉体相比较,Ag颗粒填充的TiO2纳米中空纤维在光分解亚甲基蓝上表现出了更好的光催化性能.     

α-Fe_2O_3空心球的水热法制备及其对苯酚的吸附性能

以铁氰化钾、磷酸二氢铵等为反应物,采用水热法合成了α-Fe2O3空心球,并用XRD,TEM,FESEM(场发射扫描电镜)、UV-Vis和低温氮吸附脱附对其进行了表征。结果表明,α-Fe2O3空心球直径在200～560nm之间,其BET比表面积为80m2·g-1,平均孔径为8.5nm。考察了反应时间、反应物用量和反应温度等对α-Fe2O3空心球形貌和大小的影响,提出了其可能的形成机理。研究了室温下α-Fe2O3空心球吸附苯酚的性能,吸附达平衡时,其吸附苯酚的量达97mg·g-1。     

同轴静电纺丝法在纳米中空TiO2纤维中填充Ag的应用

以聚乙烯吡咯烷酮(PVP)溶胶/钛酸四正丁酯和PVP溶胶/银颗粒为前驱体, 以共轴静电纺丝法制备了银填充的TiO2中空纳米纤维. 将双组分纤维在200 ℃下热处理去除乙醇与表面吸附水后, 继而在空气气氛中焙烧至600 ℃, 可以得到在内表面上沉积银颗粒的TiO2纳米管, 银颗粒的直径为5-40 nm, TiO2纳米管的外径150-300 nm, 管臂厚10-20 nm. 用红外吸收光谱(IR)、X射线衍射(XRD)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)等测试手段对超细纤维进行了表征. 中空纤维的直径和管壁可以通过改变电纺参数来调节. 与Ag-TiO2纳米纤维、TiO2纳米中空纤维、TiO2纳米纤维及TiO2纳米粉体相比较, Ag颗粒填充的TiO2纳米中空纤维在光分解亚甲基蓝上表现出了更好的光催化性能.     

Single-crystalline rutile TiO2 hollow spheres: room-temperature synthesis, tailored visible-light-extinction, and effective scattering layer for quantum dot-sensitized solar cells

A general synthesis of inorganic single-crystalline hollow spheres has been achieved through a mechanism analogous to the Kirkendall effect, based on a simple one-step laser process performed at room temperature. Taking TiO(2) as an example, we describe the laser process by investigating the influence of experimental parameters, for example, laser wavelength, laser fluence/irradiation time, liquid medium, and concentration of starting materials, on the formation of hollow spheres. It was found that the size-tailored TiO(2) hollow spheres demonstrate tunable light scattering over a wide visible-light range. Inspired by the effect of light scattering, we introduced the TiO(2) hollow sphere's scattering layer in quantum dot-sensitized solar cells and achieved a current notable 10% improvement of solar-to-electric conversion efficiency, indicating that TiO(2) hollow spheres are potential candidates in optical and optoelectronic devices.     

Synthesis and growth mechanism of titanate and titania one-dimensional nanostructures self-assembled into hollow micrometer-scale spherical aggregates

Three-dimensional, dendritic micrometer-scale spheres of alkali metal hydrogen titanate 1D nanostructures (i.e., nanowires and nanotubes) have been generated using a modified hydrothermal technique in the presence of hydrogen peroxide and an alkali metal hydroxide solution. Sea-urchin-like assemblies of these 1D nanostructures have been transformed into their hydrogen titanate analogues (lepidocrocite HxTi2-x/4squarex/4O4 (x approximately 0.7, square: vacancy)) by neutralization as well as into their corresponding anatase TiO2 nanostructured counterparts through a moderate high-temperature annealing dehydration process without destroying the 3D hierarchical structural motif. The as-prepared hollow spheres of titanate and titania 1D nanostructures have overall diameters, ranging from 0.8 to 1.2 microm, while the interior of these aggregates are vacuous with a diameter range of 100 to 200 nm. The constituent, component titanate and TiO2 1D nanostructures have a diameter range of 7+/-2 nm and lengths of up to several hundred nanometers. A proposed two-stage growth mechanism of these hollow micrometer-scale spheres was supported by time-dependent scanning electron microscopy, atomic force microscopy, and inductively coupled plasma atomic emission spectrometry data. We have also demonstrated that these assemblies are active photocatalysts for the degradation of synthetic Procion Red dye under UV light illumination.     

Preparation and characterization of silver/TiO2 composite hollow spheres

Silver-coated poly(methyl acrylic acid) (PSA) core-shell colloid particles were prepared by an in situ chemical reduction method. Crystalline silver/titania composite hollow spheres were obtained by coating the as-prepared PSA/silver particles with an amorphous titania layer and subsequently calcining in Ar atmosphere. SEM and TEM investigation indicated that the size of the as-prepared PSA/silver and PSA/silver/TiO(2) core-shell particles and silver/titania composite hollow particles was fairly uniform and the wall thickness of the hollow spheres was in the range of 40-80 nm. UV-vis absorption spectra were recorded to investigate their optical properties.     

Sonochemical Preparation of Hierarchical ZnO Hollow Spheres for Efficient Dye‐Sensitized Solar Cells

Hierarchical ZnO hollow spheres (400–500 nm in diameter) consisting of ZnO nanoparticles with a diameter of approximately 15 nm have been successfully prepared by a facile and rapid sonochemical process. The formation of hierarchical ZnO hollow spheres is attributed to the oriented attachment and subsequent Ostwald ripening process according to time‐dependent experiments. The as‐prepared ZnO hollow spheres are used as a photoanode in dye‐sensitized solar cells and exhibit a highly efficient power conversion efficiency of 4.33 %, with a short‐circuit current density of 9.56 mA cm^?2, an open‐circuit voltage of 730 mV, and a fill factor of 0.62 under AM 1.5 G one sun (100 mW cm^?2) illumination. Moreover, the photovoltaic performance (4.33 %) using the hierarchical ZnO hollow spheres is 38.8 % better than that of a ZnO nanoparticle photoelectrode (3.12 %), which is mainly attributed to the efficient light scattering for the former.     

SnO2 hollow spheres:Polymer bead-templated hydrothermal synthesis and their electrochemical properties for lithium storage

SnO2 hollow spheres have been synthesized via a facile hydrothermal method using sulfonated polystyrene beads as a template followed by a calcination process in air.X-ray diffraction,scanning electron microscopy,and transmission electron microscopy show that the as-obtained SnO2 hollow spheres have a wall thickness of about 50 nm,and consist of nanosized SnO2 particles with a mean diameter of about 15 nm.Electrochemical measurements indicate that the SnO2 hollow spheres exhibit improved electrochemical performance in terms of specific capacity and rate capability in comparison with commercial SnO2 when used as anode materials for lithium-ion batteries.The enhanced performance may be attributed to the spherical and hollow structure,as well as the building blocks of SnO2 nanoparticles.     

Degradation of methylene blue in aqueous dispersion of hollow titania photocatalyst: study of reaction enhancement by various electron scavengers

Submicrometer-sized titania hollow spheres have been synthesized by employing sulfonated polystyrene latex particles (averaged diameter: 200 nm) as a template in conjunction with the sol-gel method. Utilization of 0.20 mol/L titanium tetrabutoxide and 25 g/L latex led to the formation of anatase particles having shell thickness of about 15 nm and void diameter of about 150 nm. Photocatalytic activity of the titania hollow spheres was examined by focusing on its enhancement by electron scavengers in the photocatalytic decomposition of methylene blue (MB). The electron scavengers employed were inorganic oxidants such as ClO*3, BrO*3, IO*4, H2O2, and S2O2*8. Differences in electronegativity, atomic radius of the halogens, and the number of highly reactive radical and nonradical intermediates were proven to be important criteria for an electron scavenger to yield high efficiency in the MB photodecomposition. Based on the results, the effect of the oxidants used were found to be in the order of S2O2*8 > IO*4 > BrO*3 > H2O2 > ClO*3.     

苯胺与吡咯共聚物空心球的自组装制备及性能

以碱性溶液为反应介质,苯胺和吡咯为单体,采用稀释聚合法制备苯胺-吡咯共聚物自组装空心微球.研究了搅拌条件、共聚单体摩尔比、聚合反应介质和聚合时间对共聚物形貌的影响.采用扫描电子显微镜、透射电子显微镜、红外光谱、广角X射线衍射、热重分析仪和四探针技术表征了共聚物的形貌、结构和性能.研究结果表明,聚合反应条件对共聚物的形貌有重大影响,通过调整聚合反应条件,可以实现共聚物形貌的有效调控.共聚单体总摩尔浓度为0.05 mol/L,氨水溶液作为反应介质,在静态条件下反应24 h可以得到尺寸均一、平均外直径为610～863 nm,壳厚144～162 nm的自组装共聚物空心微球.同时,研究了共聚物对银离子的吸附性能,结果表明共聚物对银离子有还原作用,吸附后共聚物表面有纳米银的生成.     

Ellipsoidal TiO2 hierarchitectures with enhanced photovoltaic performance

Hierarchical TiO(2) ellipsoids 250-500 nm in size have been synthesized on a large scale by a template-free hydrothermal route. The submicrometer-sized hierarchitectures are assembled from highly crystallized anatase nanorods about 17 nm in diameter with macroporous cavities on the outer shells. Based on the time-dependent morphological evolution under hydrothermal conditions, an oriented attachment process is proposed to explain formation of the hierarchical structures. Such hierarchical TiO(2) not only adsorbs large amounts of dye molecules due to high surface area, but also shows good light scattering caused by the submicrometer size. The TiO(2) hierarchitectures were deposited on top of a transparent TiO(2) nanocrystalline main layer to construct a double-layered photoanode for dye-sensitized solar cell (DSC) application, exhibiting enhanced light harvesting and power-conversion efficiency compared to a commercial TiO(2)-based electrode.