Complexation and thermodynamic studies of oxathiadibenzocrown ethers with Cu2+, Pb2+, Zn2+ and Cd2+ ions

A thermodynamic study of the complexation of Cu²⁺, Pb²⁺, Zn²⁺ and Cd²⁺ ions with 1 and 2 in acetonitrile has been carried out. The study was conducted in the temperature range 283–308 K using a conductometric technique. The observed molar conductivity, Λ, was found to decrease significantly for mole ratios [L]_t/[M]_t less than unity in all cases. A model involving 1:1 stoichiometry has been used to analyze the conductivity data. The stability constant, K, for each 1:1 complex was determined from the conductivity data by using a nonlinear least-squares curve fitting procedure. The results show that compound 1 has no peak selectivity for any of the metal cations, while compound 2 selectively associates with Cu²⁺ and Pb²⁺. Complexes of 1 have the following stability order Pb²⁺ > Cu²⁺ > Zn²⁺ > Cd²⁺  and Pb²⁺ > Cu²⁺ for the complexes of 2. The ?H° and ?S° values for the complexation process were obtained from the slope and intercept of the Van’t Hoff plots respectively. All ?G° values were negative and were determined from the Gibbs–Helmholtz equation and the significance of these values is discussed.     

Spectrophotometric and conductometric studies of the thermodynamics complexation of Zn2+, Ni2+, Co2+, Pb2+ and Cu2+ ions with 1,13-bis(8-quinolyl)-1,4,7,10,13-pentaoxatridecane ligand in acetonitrile solution

The complexation reaction between 1,13-bis(8-quinolyl)-1,4,7,10,13-pentaoxatridecane ligand (Kryptofix5) and Zn²⁺, Ni²⁺, Co²⁺, Pb²⁺ and Cu²⁺ ions were studied conductometrically in acetonitrile solution. The formation constants of the resulting 1:1 complexes were calculated from the computer fitting of the molar conductance and absorbance measurements in various mole ratios. The enthalpy and entropy changes of the complexation reactions were derived from titration conductometry in acetonitrile at various temperatures. At 25 °C, the stability of the resulting complexes varied in the order Pb²⁺ > Zn²⁺ > Cu²⁺> Co²⁺> Ni²⁺.     

Proton NMR study of the stoichiometry, stability and thermodynamics of complexation of Rb+ ion with 18-crown-6 in binary dimethylsulfoxide–nitrobenzene mixtures

Proton NMR was used to study the complexation reaction of Rb⁺ ion with 18-crown-6 (18C6) in a number of binary dimethylsulfoxide (DMSO)–nitrobenzene (NB) mixtures at different temperatures. In all cases, the exchange between free and complexed 18C6 was fast on the NMR time scale and only a single population average ¹H signal was observed. The formation constants of the resulting 1:1 complexes in different solvent mixtures were determined by computer fitting of the chemical shift mole ratio data. There is an inverse relationship between the complex stability and the amount of DMSO in the solvent mixtures. The enthalpy and entropy values for the complexation reaction were evaluated from the temperature dependence of formation constants. In all solvent mixtures studied, the resulting complex is enthalpy stabilized but entropy destabilized. The ?H° versus T?S° plot of all thermodynamic data obtained shows a fairly good linear correlation indicating the existence of enthalpy–entropy compensation in the complexation reaction.     

Study of Complex Formation between 5,7‐Diiodo‐8‐hydroxyquinoline and Zn2+, Cd2+, Pb2+ and Tl+ Cations in Binary Non‐Aqueous Solvents Using Square Wave Polarography Technique (SWP)

The complexation reaction between Zn²⁺, Pb²⁺, Cd²⁺ and Tl⁺ cations by 5,7‐diiodo‐8‐hydroxyquinoline (IQN) was studied in the Dimethylformamide /Acetonitril (DMF‐AN) binary system using square wave polarography technique. The stoichiometry and stability of the complexes were determined by monitoring the shifts in half‐wave or peak potential of the polarographic waves of metal ions against the ligand concentration. The stoichiometry of the complexes was found to be 1:1. The results obtained show that there is an inverse relationship between the formation constant of the complexes and the donor number of solvent base on the Guttmann donocity scale. In all cases the formation constants increased with increasing amounts of AN in these binary systems. The selectivity order for IQN complexes with the cations is Zn²⁺ > Pb²⁺ > Cd²⁺ > Tl⁺.     

Conductance Study of the Thermodynamics of Complexation of K+, Rb+, Cs+ and Tl+ Ions with Dibenzo-24-crown-8 in Binary Acetonitrile–Nitromethane Mixtures

The complexation reactions between dibenzo-24-crown-8 (DB24C8) and K⁺, Rb⁺, Cs⁺ and Tl⁺ ions were studied conductometrically in different acetonitrile–nitromethane mixtures at various temperatures. The formation constants of the resulting 1:1 complexes were calculated from the computer fitting of the molar conductance–mole ratio data at different temperatures. At 25 °C and in all solvent mixtures used, the stability of the resulting complexes varied in the order Tl⁺ > K⁺ > Rb⁺ > Cs⁺. The enthalpy and entropy changes of the complexation reactions were evaluated from the temperature dependence of formation constants. It was found that the stability of the resulting complexes increased with increasing nitromethane in the solvent mixture. The TΔS° vs. ΔH° plot of all thermodynamic data obtained shows a fairly good linear correlation indicating the existence of enthalpy–entropy compensation in the complexation reactions.     

Conductometric studies of thermodynamics of complexation of Li+, Na+ and K+ ions with 4′,4″(5″)-di-tert-butyldibenzo-18-crown-6 in binary acetonitrile–nitromethane mixtures

The complexation reactions between 4′,4″(5″)-di-tert-butyldibenzo-18-crown-6 (DTBDB18C6) and Li⁺, Na⁺ and K⁺ ions were studied conductometrically in different acetonitrile–nitromethane mixtures at various temperatures. The formation constants of the resulting 1:1 complexes were calculated from the computer fitting of the molar conductance-mole ratio data at different temperatures. At 20 °C and in nitromethane solvent, the stability of the resulting complexes varied in the order K⁺ > Na⁺ > Li⁺. The enthalpy and entropy changes of the complexation reactions were evaluated from the temperature dependence of formation constants. It was found that the stability of the resulting complexes increased with increasing nitromethane in the solvent mixture. The TΔS° versus ΔH° plot of thermodynamic data obtained shows a fairly good linear correlation indicating the existence of enthalpy–entropy compensation in the complexation reactions. The ab initio studies calculated at B3LYP/6-31G level of theory, indicate the binding energy of complexes decreases with increasing cation size in the gas phase. In the solution phase, DTBDB18C6 preferentially forms complexes with the larger ions rather than the smaller ions because the solvation energies of the smaller ions are large enough to overcome and reverse the trends in gas phase complexation. The findings of this study suggest that the current understanding of the factors influencing the selectivity of metal ion complexation by crown ethers may be in need of revision.     

Competitive 7Li NMR Study on the Mn2+, Zn2+ and Cd2+ Complexes of Two New Branched Hexadentate (N6) Amines Containing the Pyridine Moiety in Nitromethane and Acetonitrile Solutions

Lithium-7 NMR spectroscopy was used to investigate the stoichiometry and stability of a Li⁺ complex with two new branched amines, 4,7-bis(2-pyridylmethyl)-4,7-diazadecane-1,10-diamine (L¹) and 4,8-bis(2-pyridylmethyl)-4,8-diazaundecane-1,11-diamine (L²), in acetonitrile and nitromethane. A competitive ⁷Li NMR method was also employed to probe the complexation of Mn²⁺, Zn²⁺ and Cd²⁺ ions with L¹ and L² in the same solvent systems. The formation constants of the resulting complexes were evaluated from computer fitting of the mole ratio data with an equation that relates the observed chemical shifts to the formation constant. In both solvents, the stability of the resulting 1:1 complexes was found to vary in the order Cd²⁺ > Zn²⁺ > Mn²⁺ > Li⁺.     

Synthesis and metal ion complexation of acyclic Schiff base podands with lipophilic amide and ester end groups

A series of acyclic Schiff base podands 14?C19 with lipophilic amide and ester end groups were synthesized in good yield and in a simple way. Their transition metal ions complexation was studied using conductometric method in acetonitrile (AN) at 25 °C. Schiff base podands 14?C16 showed a continuous decrease in the molar conductances in their complexation with Hg²⁺, Pb²⁺, Cu²⁺, Zn²⁺ and Cd²⁺ which begins to level off at a mole ratio of 1:1 crown-to-metal indicating the formation of a stable 1:1 complexes. The order of the stability constants of the metal ions studied with the Schiff base podands 14, 15 and 16 is: Hg²⁺ > Pb²⁺ > Cu²⁺ > Zn²⁺ > Cd²⁺ > Ag⁺. Metal ion complexation by acyclic diamide or diester podands involves presumably the oxygen atoms of the carbonyl groups in addition to the nitrogen atoms of the imino groups.     

A Polarographic Study of Tl+, Pb2+ and Cd2+ Complexes with Aza-18-crown-6 and Dibenzopyridino-18-crown-6 in some Binary Mixed Non-aqueous Solvents

The complexation of Tl⁺, Pb²⁺and Cd²⁺ cations by macrocyclic ligands, aza-18-crown-6 (L1) and dibenzopyridino-18-crown-6 (L2) was studied in some binary mixtures of methanol (MeOH), n-propanol (n-PrOH), nitromethane (NM) and acetonitrile (AN) with dimethylformamide (DMF) at 22 °C using DC (direct current) and differential pulse polarographic techniques (DPP). The stoichiometry and stability constants of the complexes were determined by monitoring the shifts in half-waves or peak potentials of the polarographic waves of metal ions against the ligand concentration. In all of the solvent systems, the stability of the resulting 1:1 complexes was found to be L1 > L2. The selectivity order of the L2 ligand for the cations was found to be Pb²⁺ > Tl⁺ > Cd²⁺ and the selectivity of the L1 ligand for Pb²⁺ ion was greater than that of Tl⁺ ion. The results show that the stability of the complexes depends on the nature and composition of the mixed solvents. There is an inverse relationship between the stability constants of the complexes and the amount of dimethylformamide in the mixed solvent systems.     

Studies on Synthetic Inorganic Ion Exchangers-III Quantitative Separations of Mg2+ -Pb2+, Zn2+ - Pb2+ Cu2+ - Pb2+, Al3+ - Pb2+, Zn2+ - Cd2+, and Mg2+ - Cd2+ on Lead Antimonate Columns

Abstract

A new inorganic ion exchanger, lead antimonate has been synthesized having an Pb:Sb ratio of 1:5 and cation exchange capacity of 1.46 mequiv./g. It is fairly stable in water and dilute solutions of acids, bases and salts. Ion distribution studies on twenty metal ions have been determined on this gel at pH 1,2,3 and 5. The following mixtures have been separated: Mg²⁺ - Pb²⁺, Zn²⁺ - Pb²⁺, Zn²⁺ - Pb²⁺, Cu²⁺ - Pb²⁺, Al³⁺ - Pb²⁺, Zn²⁺ - Cd²⁺ and Mg²⁺ - Cd²⁺. Mg²⁺ and Al³⁺ were removed with 0.4 M ammonium nitrate, Cu²⁺ and Zn²⁺ with 0.4 M ammonium nitrate + 0.1M nitric acid (1:1), Pb²⁺ with 0.5M nitric acid and Cd²⁺ with 0.25M nitric acid. A tentative structure of this material is proposed on the basis of chemical analysis, pH titrations, thermogravimetry and IR spectrophotometry.     

Proton NMR study of the stoichiometry, stability and thermodynamics of complexation of Ag+ ion with octathia-24-crown-8 in binary dimethylsulfoxide–nitrobenzene mixtures

Proton NMR was used to study the complexation reaction of Ag⁺ with octathia-24-crown-8 (OT24C8) in a number of binary dimethylsulfoxide (DMSO)–nitrobenzene (NB) mixtures at different temperatures. In all cases, the exchange between free and complexed OT24C8 was fast on the NMR time scale and only a single population average ¹H signal was observed. The formation constants of the resulting 1:1 complexes in different solvent mixtures were determined by computer fitting of the chemical shift-mole ratio data. There is an inverse relationship between the complex stability and the amount of DMSO in the solvent mixtures. The enthalpy and entropy values for the complexation reaction were evaluated from the temperature dependence of formation constants. In all solvent mixtures studied, the resulting complex is enthalpy stabilized but entropy destabilized. The TΔS° versus ΔH° plot of all thermodynamic data obtained shows a fairly good linear correlation indicating the existence of enthalpy–entropy compensation in the complexation reaction.     

Spectrophotometric study of complexation of dibenzopyridino-18-crown-6 with some transition and post-transition metal ions in DMSO solution using murexide as a metallochromic ligand

The complexation reaction of dibenzopyridino-18-crown-6 (DBPY 18C6) with Co²⁺, Cu²⁺, Zn²⁺, Pb²⁺, Cd²⁺, Hg²⁺, and Ag⁺ have been studied in DMSO at 25°C by the spectrophotometric method. Murexide was used as a competitive colored ligand. The stoichiometry of metal ion-murexide and metal ions with DBPY18C6 complexes were estimated by mole ratio and continuous variation methods and emphasized by the KINFIT program. The stoichiometry of all the complexes was found to be 1: 1 (metal ion/ligand). The order of stability constants for the obtained metal ion-murexide complexes (1: 1) varies in the order Cu²⁺ > Cd²⁺ > Co²⁺ ∼ Pb²⁺ > Zn²⁺ > Ag⁺ > Hg²⁺. This trend shows that the transition metal ions clearly obey the Irving-Williams role. For the post-transition metal ions, the ionic radius and soft-hard behavior was the major affects in varying of this order. The dibenzopyridino-18-crown-6 complexes with the used metal ions vary as Ag⁺ > Pb²⁺ > Cu²⁺ > Cd²⁺ > Hg²⁺ > Zn²⁺ > Co²⁺. The article is published in the original.     

Competitive Potentiometric Study of the Thermodynamics of Complexation of Some Transition and Heavy Metal Ions with Dibenzopyridino-18-crown-6 in Methanol using Ag+ Ion as a Probe

The complexation of dibenzopyridino-18-crown-6 with some transition and heavy metal ions in methanol solution at various temperatures was studied by a competitive potentiometric method using a Ag⁺/Agelectrode system. The stoichiometry and stability of the resulting complexes were computed by the MINIQUAD program. The stability of the resulting complexes varied in the order Ag⁺ > Pb²⁺ > Tl⁺ > Cu²⁺ > Cd²⁺ > Zn²⁺. The enthalpy and entropy of the resulting 1:1 complexeswere evaluated from the temperature dependence of the stability constants.The complexes of all cations were enthalpy-stabilized but entropy-destabilized,except for Ag⁺ and Pb²⁺ ions,which were also entropy-stabilized.     

Conductometric study of complexation reaction between 15-crown-5 and Cr3+, Mn2+ and Zn2+ metal cations in pure and binary mixed organic solvents

The stability constants (K_f) for the complexation reactions of Cr³⁺, Mn²⁺ and Zn²⁺ metal cations with macrocyclic ligand, 15-crown-5 (15C5), in acetonitrile (AN), ethanol (EtOH) and also in their binary solutions (AN–EtOH) were determined at different temperatures, using conductometric method. 15C5 forms 1:1 complexes with Cr³⁺, Mn²⁺ and Zn²⁺ cations in solutions. A non-linear behaviour was observed for changes of logK_f of the metal ion complexes versus the composition of the mixed solvent. The order of stability of the metal–ion complexes in pure AN and in a binary solution of AN–EtOH (mol% AN?=?52) at 25?°C was found to be: (15C5Zn)²⁺?>?(15C5·Mn)²⁺?>?(15C5·Cr)³⁺, but in the case of pure EtOH at the same temperature, it changes to: (15C5·Zn)²⁺?>?(15C5·Cr)³⁺?>?(15C5·Mn)²⁺. The results also show that the stability sequence of the complexes in the other binary solutions of AN–EtOH (mol% AN?=?26 and mol% AN?=?76) varies in order: (15C5·Cr)³⁺?~?(15C5·Zn)²⁺?>?(15C5·Mn)²⁺. The values of the standard thermodynamic quantities (ΔH_C°, ΔS_C°) for formation of (15C15-Cr³⁺), (15C5-Mn²⁺) and (15C5-Zn²⁺) complexes were obtained from the temperature dependence of the stability constants and the results show that the thermodynamics of complexation reactions is affected by nature and composition of the solvent systems and in most solution systems, the complexes are enthalpy stabilized but entropy destabilized.     

Preparation of Activated Carbon From Olive Stone Waste: Optimization Study on the Removal of Cu2+, Cd2+, Ni2+, Pb2+, Fe2+, and Zn2+ from Aqueous Solution Using Response Surface Methodology

The removal efficiencies of Cu²⁺, Cd²⁺, Ni²⁺, Pb²⁺, Fe²⁺, and Zn²⁺ from aqueous solution with olive stone activated carbon (OSAC) were investigated in this paper. Central composite design method was used to optimize the preparation of OSAC by chemical activation using potassium hydroxide (KOH) as chemical agent. The optimum conditions obtained were 715°C activation temperature, 2 hours activation time, and 1.53 impregnation ratio. This resulted in removal of 99.25% Cu²⁺, 94.98% Cd²⁺, 99.08% Ni²⁺, 99.33% Pb²⁺, 99.41% Fe²⁺, and 99.17% Zn²⁺, as well as 73.94% OSAC yield. The surface characteristics of the activated carbon (AC) prepared under optimized condition were examined by pore structure analysis, scanning electron microscopy, and Fourier transform infrared spectroscopy. The Brunauer–Emmett–Teller (BET) surface area, total pore volume, and average pore diameter of the prepared activated carbon were 886.72 m²/g, 0.507 cm³/g, and 4.22 nm, respectively. The equilibrium data of the adsorption was well fitted to the Langmuir and the highest value of adsorption capacity (Q) on the OSAC was found for Fe²⁺ (57.47 mg/g), followed by Pb²⁺ (22.37 mg/g), Cu²⁺ (17.83 mg/g), Zn²⁺ (11.14 mg/g), Ni²⁺ (8.42 mg/g), and Cd²⁺ (7.80 mg/g). The prepared OSAC can be used for efficient removal of metals from contaminated wastewater.     

Thermodynamic behavior of complexation of 18-crown-6 with Tl<Superscript>+</Superscript>, Pb<Superscript>2+</Superscript>, Hg<Superscript>2+</Superscript>, and Zn<Superscript>2+</Superscript> metal cations in methanol-water binary media

The equilibrium constants and thermodynamic parameters for complex formation of 18-Crown-6 (18C6) with Tl⁺, Pb²⁺, Hg²⁺, and Zn²⁺ metal cations have been determined by conductivity measurements in methanol (MeOH)-water (H₂O) binary solutions. 18-Crown-6 forms 1:1 complexes with Hg²⁺ and Zn²⁺ cations, but in the case of Tl⁺ and Pb²⁺ cations, in addition to 1:1 stoichiometry, 1:2 (ML₂) complexes are formed in some binary solvents. The thermodynamic parameters (ΔH _c⁰ and ΔS _c⁰), which were obtained from the temperature dependences of equilibrium constants, show that in most cases the complexes are enthalpy destabilized but entropy stabilized. Non-linear behavior is observed between the equilibrium constants (log K _f ) of complexes and the composition of the mixed solvent. The selectivity of the ligand for these metal cations is sensitive to the solvent composition, and, in some cases, the selectivity order is reversed in certain compositions of the mixed solvent. The results also show that the mechanism of complexation reactions and the stoichiometry of complexes of some metal cations change with the nature and even with the composition of the mixed solvent. The article was submitted by the authors in English.     

Conductance Studies on Complex Formation Between Aza-18-Crown-6 with Ag+, Hg2+ and Pb2+ Cations in DMSO–H2O Binary Solutions

The complexation reactions between Ag⁺, Hg²⁺ and Pb²⁺ metal cations with aza-18-crown-6 (A18C6) were studied in dimethylsulfoxide (DMSO)–water (H₂O) binary mixtures at different temperatures using the conductometric method. The conductance data show that the stoichiometry of the complexes in most cases is 1:1(ML), but in some cases 1:2 (ML₂) complexes are formed in solutions. A non-linear behaviour was observed for the variation of log K _f of the complexes vs. the composition of the binary mixed solvents. Selectivity of A18C6 for Ag⁺, Hg²⁺ and Pb²⁺ cations is sensitive to the solvent composition and in some cases and in certain compositions of the mixed solvent systems, the selectivity order is changed. The values of thermodynamic parameters (ΔH _c^o, ΔS _c^o) for formation of A18C6–Ag⁺, A18C6–Hg²⁺ and A18C6–Pb²⁺ complexes in DMSO–H₂O binary systems were obtained from temperature dependence of stability constants and the results show that the thermodynamics of complexation reactions is affected by the nature and composition of the mixed solvents.     

Study of Complex Formation Between 18-Crown-6 and Pb2+, Tl+ and Cd2+ Cations in Binary Aqueous/Non-aqueous Solvents Using Polarographic Techniques (DPP and SWP)

The complexation of Pb²⁺, Tl⁺ and Cd²⁺ cationsby 18-crown-6 was studied in water/propanol (H₂O/PrOH),water/acetonitrile (H₂O/AN) and water/dimethylformamide(H₂O/DMF) binary systems at 20 °C using squarewave polarography (SWP) and differential pulse polarography (DPP).It was confirmed that the stoichiometry of each of the complexes formed between 18C6 and the respective cations is 1 : 1. The formation constants of the complexes were found to increase with increasing concentration of the non-aqueous solvent. In all cases, a stability order of Pb²⁺ > Tl⁺ > Cd²⁺ was observed. In general,the stabilities of individual complexes were found to decrease as the binary solvent mixture varied from H₂O/AN to H₂O/PrOH to H₂O/DMF.     

A Conductometric Study of Complexation Reactions Between Dibenzo-18-Crown-6 (DB18C6) with Cu2+, Zn2+, Tl+ and Cd2+ Metal Cations in Dimethylsulfoxide–Ethylacetate Binary Mixtures

The complex formation between Cu²⁺, Zn²⁺, Tl⁺ and Cd²⁺ metal cations with macrocyclic ligand, dibenzo- 18-crown-6 (DB18C6) was studied in dimethylsulfoxide (DMSO)–ethylacetate (EtOAc) binary systems at different temperatures using conductometric method. In all cases, DB18C6 forms 1:1 complexes with these metal cations. The stability constants of the complexes were obtained from fitting of molar conductivity curves using a computer program, Genplot. The non-linear behaviour which was observed for variations of log K _f of the complexes versus the composition of the mixed solvent was discussed in terms of changing the chemical and physical properties of the constituent solvents when they mix with one another and, therefore, changing the solvation capacities of the metal cations, crown ether molecules and even the resulting complexes with changing the mixed solvent composition. The results show that the selectivity order of DB18C6 for the metal cations in pure ethylacetate and pure dimethylsulfoxide is: Tl⁺ > Cu²⁺ > Zn²⁺ > Cd²⁺ but the selectivity order is changed with the composition of the mixed solvents. The values of enthalpy changes (ΔH°_C) for complexation reactions were obtained from the slope of the van’t Hoff plots and the changes in standard enthalpy (ΔS°_C) were calculated from the relationship: ΔG°_C,298.15=ΔH°_C − 298.15 ΔS°_C. The obtained results show that in most cases, the complexes are enthalpy stabilized, but entropy destabilized and the values of ΔH°_C and ΔS°_C depend strongly on the nature of the medium.     

Thermodynamics of Complexation of Tetraalkylammonium and Rare-earth Cations with Two Sulfonatocalix[n]arenes (n=4 and 6) in Aqueous Solution

We report results of a microcalorimetry study of the association of inorganic and organic cations with two p-sulfonatocalix[n]arenes (host 1: n = 4; host 2: n = 6) in aqueous solution at 298.15 K. First, we have determined the thermodynamic parameters for the complexation between the host 2 and a series of quaternary ammonium cations. We have evaluated the influence of the pH on the structure and energetics of these organic complexes. We have also reported the association constant and enthalpy of reaction for the complexation of some rare-earth cations (Sm³⁺, Dy³⁺, Y³⁺ and Sc³⁺ cations) with the two hosts. In all cases we have observed the formation of 1:1 complexes.

Whereas the association is driven by a favourable entropy change for the inorganic cations (ΔH > 0 and TΔS>>0), it is controlled by a favourable enthalpy change for the organic cations (ΔH < < 0 and TΔS < 0 or >0). In acidic solution, the complexes formed between host 2 and tetraalkylammonium cations are weaker than those formed with the cyclic tetramer. In neutral solution this effect is not observed. All the results are in line with a conformational change of host 2 with the pH.