Silver aggregates and twofold-coordinated tin centers in phosphate glass: A photoluminescence study

The optical properties of silver species in various oxidation and aggregation states and of tin centers in melt-quenched phosphate glasses have been assessed by optical absorption and photoluminescence (PL) spectroscopy. Glasses containing silver and tin, or either dopant, were studied. Emission and excitation spectra along with time-resolved and temperature-dependent PL measurements were employed in elucidating the different emitting centers observed and investigating on their interactions. In regard to silver, the data suggests the presence of luminescent single Ag⁺ ions, Ag⁺-Ag⁺ and Ag⁺-Ag⁰ pairs, and nonluminescent Ag nanoparticles (NPs), where Ag⁺-Ag⁰→Ag⁺-Ag⁺ energy transfer is indicated. Tin optical centers appear as twofold-coordinated Sn centers displaying PL around 400 nm ascribed to triplet-to-singlet electronic transitions. The optically active silver centers were observed in glasses where 8 mol% of both Ag₂O and SnO, and 4 mol% of Ag₂O were added. Heat treatment (HT) of the glass with the high concentration of silver and tin leads to chemical reduction of ionic silver species resulting in a large volume fraction of silver NPs and the vanishing of silver PL features. Further characterization of such heat-treated glass by transmission electron microscopy and X-ray photoelectron spectroscopy appears consistent with silver being present mainly in nonoxidized form after HT. On the other hand, HT of the glass containing only silver results in the quenching of Ag⁺-Ag⁰ pairs emission that is ascribed to nonradiative energy transfer to Ag NPs due to the positioning of the pairs near the surface of NPs during HT. In this context, an important finding is that a faster relaxation was observed for this nanocomposite in relation to a heat-treated glass containing both silver and tin (no silver pairs) as revealed by degenerate four-wave mixing spectroscopy. Such result is attributed to Ag NP→Ag⁺-Ag⁰ plasmon resonance energy transfer. The data thus indicates that energy transfer between Ag⁺-Ag⁰ pairs and NPs is bi-directional.     

Effect of thermal treatment on linear optical properties of Cu nanoclusters

Silica glass was implanted with 50 keV Cu⁺ ions at various fluences from 6×10¹⁵ to 8×10¹⁶ ions/cm² and thermally-annealed in air between room temperature to 1200 °C. UV/visible spectroscopy measurements reveal absorption bands at characteristics surface plasmon resonance (SPR) frequencies, signifying the formation of copper colloids in silica, even without thermal treatments. Such copper nanoclusters can be attributed to the relatively high mobility of copper atoms, even at ambient conditions. Using the equation derived from the framework of free-electron theory, the average radii of the Cu particles were found to be in the range 2-4 nm from the experimental surface plasmon absorption peaks. Radioluminescence (RL) spectra exhibited broad bands at 410 and 530 nm, associated with the presence of Cu⁺ ions in the as-implanted samples. The effect of thermal annealing in air on absorption and emission spectra of these Cu-implanted samples, as well as the formation of copper nanoclusters from original Cu⁺ ions, is discussed.     

Electrochemical synthesis of Ag nanoparticles supported on glassy carbon electrode by means of p-isopropyl calix[6]arene matrix and its application for electrocatalytic reduction of H2O2

The silver nanoparticles were prepared on the glassy carbon (GC) electrode, modified with p-iso propyl calix[6]arene, by preconcentration of silver ions in open circuit potential and followed by electrochemical reduction of silver ions. The stepwise fabrication process of Ag nanoparticles was characterized by scanning electron microscopy and electrochemical impedance spectroscopy. The prepared Ag nanoparticles were deposited with an average size of 70 nm and a homogeneous distribution on the surface of electrode. The observed results indicated that the presence of calixarene layer on the electrode surface can control the particle size and prevent the agglomeratione and electrochemical deposition is a promising technique for preparation of nanoparticles due to its easy-to-use procedure and low cost of implementation. Cyclic voltammetry experiments showed that Ag nanoparticles had a good catalytic ability for the reduction of hydrogen peroxide (H₂O₂). The effects of p-isopropyl calix[6]arene concentration, applied potential for reduction of Ag⁺, number of calixarene layers and pH value on the electrocatalytic ability of Ag nanoparticles were investigated. The present modified electrode exhibited a linear range from 5.0 × 10⁻⁵ to 6.5 × 10⁻³ M and a detection limit 2.7 × 10⁻⁵ M of H₂O₂ (S/N = 3) using amperometric method.     

Optical properties of sol-gel fabricated Mn/SiO2 nanocomposites: Observation of surface plasmon resonance in Mn nanoparticles

Manganese nanoparticles were grown in silica glass and silica film on silicon substrate by annealing of the sol-gel prepared porous silicate matrices doped with manganese nitrate. Annealing of doped porous silicate matrices was performed at various conditions that allowed to obtain the nanocomposite glasses with various content of metallic Mn. TEM of Mn/SiO₂ glass indicates the bimodal size distribution of Mn nanoparticles with mean sizes of 10.5 nm and 21 nm. The absorption and photoluminescence spectra of Mn/SiO₂ glasses were measured. In the absorption spectra at 300 nm (4.13 eV) we observed the band attributed to the surface plasmon resonance in Mn nanoparticles. The spectra proved the creation of Mn²⁺ and Mn³⁺ ions in silica glass as well. The absorption spectra of Mn/SiO₂ glasses annealed in air prove the creation of manganese oxide Mn₂O₃. The measured reflection spectra of Mn/SiO₂ film manifest at 240-310 nm the peculiarity attributed to surface plasmons in Mn nanoparticles.     

Biasing effects on thallium and silver chlorides with dc/ac voltage

Comparison was made between crystals of thallium chloride and silver chloride on their biasing effects with dc/ac voltage. Previous reports say that, although their electrical conductivities are similar, the dominant charge carriers in the former are the Cl⁻ ions while the Ag⁺ ions in the latter. The present dc/ac study demonstrates the following: for thallium chloride, although Cl⁻ conduction may be dominant under low bias field, Tl⁺ conduction supercedes Cl⁻ conduction when the bias field is enhanced. For silver chloride, Ag⁺ conduction is overwhelming within wide temperature range, to cause easy dielectric breakdown on dc biasing. Concerning the extrinsic conductivity seen at temperatures below 60 °C (thallium chloride) or below 150 °C (silver chloride), it is ascribed to grain-boundary related electron conduction, not to grain-boundary related Tl⁺ or Ag⁺ conduction as reported earlier.     

Hybrid nanostructured supports for surface enhanced Raman scattering

Porous silicon solid supports with pore diameter 0.5-1 μm, infiltrated with Ag nanostructures for surface enhanced Raman scattering (SERS) were prepared according to two procedures: spontaneous Ag⁺ reduction on the surface of freshly etched porous silicon immersed in Ag⁺ aqueous solutions, or anchoring colloidal Ag nanoparticles on the surface previously functionalized by aminosilane. Using Rhodamine 6G (RH6G) as analyte the detection limits were of the order of 20 μM and 20 nM with porous silicon metalized by the first and second procedure, respectively. This large increase of sensitivity notwithstanding a reduced surface density of Rhodamine 6G obtained on porous silicon metalized by the second procedure is discussed in terms of better hot spot efficiency and reduced aspecific binding out of the hot regions obtained depositing the colloids on the aminosilane functionalized surface.     

Influence of silver on the Sm<Superscript>3+</Superscript> luminescence in “Aerosil” silica glasses

The introduction of silver into the samarium-containing silica glasses prepared by the original solgel method leads to the formation of complex optical centers involving samarium ions and simple and/or complex silver ions. These centers are characterized by the effective sensitization of Sm³⁺ luminescence by Ag⁺, (Ag₂)⁺, and (Ag⁺)₂ ions according to the exchange mechanism for, at least, Sm³⁺-Ag⁺ centers. The formation of Sm-Ag centers is accompanied by an increase in the concentration of nonbridging oxygen ions, which prevent the reduction of silver ions by hydrogen. Silver nanoparticles formed in small amounts upon this reduction are effective quenchers of luminescence from the corresponding excited states of Sm³⁺ ions.     

Optical properties of sol-gel fabricated Ni/SiO2 glass nanocomposites

Nickel nanoparticles were grown in silica glass by annealing of the sol-gel prepared silicate matrices doped with nickel nitrate. TEM characterization of Ni/SiO₂ glass proves the formation of isolated spherical nickel nanoparticles with mean sizes 6.7 and 20 nm depending on annealing conditions. The absorption and photoluminescence spectra of Ni/SiO₂ glasses were measured. In the absorption spectra, we observed the band related to the surface plasmon resonance (SPR) in Ni nanoparticles. The broadening of SPR was observed with decrease of Ni nanoparticle size. The width of the surface plasmon band decreases 1.5 times at the lowering of temperature from 293 to 2 K because of strong electron-phonon interaction. The spectra proved the creation of nickel oxide NiO clusters and Ni²⁺ ions in silica glass as well.     

Erratum to Formation and control of Au and Ag nanoparticles inside borate glasses using femtosecond laser and heat treatment

We report the spectroscopic properties of femtosecond laser-irradiated sodium-alumino-borate glass doped with silver and gold ions. We precipitated gold and silver nanoparticles by laser irradiation and annealing at 400°C for 30 min. The irradiation and annealing treatment produced different absorption and emission characteristics in Au³⁺ doped and Au³⁺, Ag⁺ codoped glasses, and the possible mechanisms of the observed results are discussed. The size of the nanoparticles was estimated by TEM and absorption band analysis.     

Use of a silver ion selective electrode to assess mechanisms responsible for biological effects of silver nanoparticles

For a detailed analysis of the biological effects of silver nanoparticles, discrimination between effects related to the nano-scale size of the particles and effects of released silver ions is required. Silver ions are either present in the initial particle dispersion or released by the nanoparticles over time. The aim of this study is to monitor the free silver ion activity {Ag⁺} in the presence of silver nanoparticles using a silver ion selective electrode. Therefore, silver in the form of silver nanoparticles, 4.2 ± 1.4 nm and 2–30 nm in size, or silver nitrate was added to cell culture media in the absence or presence of A549 cells as a model for human type II alveolar epithelial cells. The free silver ion activity measured after the addition of silver nanoparticles was determined by the initial ionic silver content. The p {Ag⁺} values indicated that the cell culture media decrease the free silver ion activity due to binding of silver ions by constituents of the media. In the presence of A549 cells, the free silver ion activity was further reduced. The morphology of A549 cells, cultivated in DME medium containing 9.1% (v/v) FBS, was affected by adding AgNO₃ at concentrations of ≥30 μM after 24 h. In comparison, silver nanoparticles up to a concentration of 200 μM Ag did not affect cellular morphology. Our experiments indicate that the effect of silver nanoparticles is mainly mediated by silver ions. An effect of silver on cellular morphology was observed at p {Ag⁺} ≤ 9.2.     

Linear dichroism, produced by thermo-electric alignment of silver nanoparticles on the surface of ion-exchanged glass

A heated Ag⁺-doped glass is subjected to an external constant uniform electric field (E_o > 250 V/cm) parallel to its surface. Absorption spectra studies by linear polarized light imply the induction of a linear dichroism in the samples, after the above-mentioned thermo-electrical process. It is found that the increase in the temperature (400 °C ≤ T ≤ 600 °C), results in the formation of neutral silver multimers and clusters on the samples. Dichroism is the result of simultaneous application of the steady uniform electric field and heating. That is, the process aligns the produced silver nanoparticles along the applied electric field (E_o) during the aggregation of silver nano-clusters via dipole-dipole interaction, leading to the formation of chain-like conductive structures.     

Influence of several factors on the growth of selenium nanowires induced by silver nanoparticles

This paper presents a study on the crystallization and growth mechanism of selenium nanowires induced by silver nanoparticles at ambient conditions with special reference to the effects of factors such as the shapes and size of silver nanoparticles, the induced reaction time, and the molar ratio of Ag⁰ to SeO₃²⁻ ions. The synthesis approach is conducted with no need of any stabilizers, and with no sonochemical process and/or templates. It is found that whether silver spherical particles or colloids can lead to the formation of nanowires with average diameter of 25 nm and lengths up to a few micrometers, and silver nanoplates lead to the formation of flat Se nanostructures. In particular, Au, Cu, Pt, and Pd particles cannot induce the growth of selenium nanowires in aqueous solution at room temperature. The results indicate that silver particles play a critical role in determining the growth of selenium nanowires. The lattice match between hexagonal-Se and orthorhombic- or trigonal-Ag₂Se particles is the major driving force in the growth of such nanostructures. The findings would be useful for design and construction of heterogeneous nanostructures with similar lattice parameter(s).     

Spectroscopy of silver complexes in solutions of inorganic compounds

The absorption, photoluminescence, and photoexcitation spectra of a number of inorganic solid solutions with a silver ion impurity have been examined. The influence of the temperature on the spectral characteristics of haloid and oxygen-containing solutions activated with Ag⁺ ions has been investigated. The temperature dependences of the luminescence quantum yield of solid solutions with Ag⁺ impurity in the temperature range 77-150 K have been studied. It is shown that the spectra under observation are conditioned by electron transition between energetic levels of Ag⁺ ion which are deformed because of the interaction with environment.     

Emission mechanism of radiophotoluminescence in Ag-doped phosphate glass

The objective of this study is to investigate the emission mechanism of radiophotoluminescence (RPL) in the Ag⁺-doped phosphate glass (glass dosimeter), which is now used as individual radiation dosimeter, because the emission mechanism of RPL in glass dosimeter was not fully understood. Optical properties such as optical absorption spectrum, RPL spectrum and change of RPL spectrum as a function of X-ray irradiation dose were measured for commercially available glass dosimeter. In this study, we discuss the emission mechanism of two RPL peaks at 460 nm and 560 nm, based on the fact that electrons and holes produced by X-ray irradiation are trapped at Ag⁺ ions to produce Ag⁰ and Ag²⁺ ions, respectively, when the Ag⁺-doped phosphate glass is exposed to X-ray. We would like to propose the emission mechanism of RPL peaks at 460 nm and 560 nm, concerning with Ag²⁺ and Ag⁰ ions.     

Sensitized luminescence through nanoscopic effects of ZnO encapsulated in SiO2:Tb sol gel derived phosphor

Terbium (1 mol%) doped ZnO-SiO₂ binary system was prepared by a sol-gel process. Nanoscopic effects of ZnO on the photoluminescence (PL) and the cathodoluminescence (CL) properties were studied. Defects emission from ZnO nanoparticles was measured at 560 nm and the line emission from Tb³⁺ ions in SiO₂:Tb³⁺ and ZnO-SiO₂:Tb³⁺ with a major peak at 542 nm was measured. The PL excitation wavelength for 542 nm Tb³⁺ emission was measured at ∼320 nm in both SiO₂:Tb³⁺ and ZnO-SiO₂:Tb³⁺. The CL data showed quenched luminescence of the ZnO nanoparticles at 560 nm from a composite of ZnO-SiO₂:Tb³⁺ and a subsequent increase in 542 nm emission from the Tb³⁺ ions. This suggests that energy was transferred from the ZnO nanoparticles to enhance the green emission of the Tb³⁺ ions. The PL and CL properties of ZnO-SiO₂:Tb³⁺ binary system and possible mechanism for energy transfer from the ZnO nanoparticles to Tb³⁺ ions are discussed.     

Ionoluminescence and photoluminescence studies of Ag ion irradiated kyanite

Ionoluminescence (IL) of kyanite single crystals bombarded with 100 MeV swift Ag⁸⁺ ions with fluences in the range 1.87-7.5×10¹¹ ions/cm² has been studied. A pair of sharp IL peaks at ∼689 and 706 nm along with broad emission in the region 710-800 nm are recorded in both crystalline and pelletized samples. Similar results are recorded in Photoluminescence (PL) of pelletized kyanite bombarded with same ions and energy with fluences in the range 1×10¹¹-5×10¹³ ions/cm² with an excitation of 442 nm laser beam. The characteristic pair of sharp emission peaks at 689 and 706 nm in both IL and PL is attributed to luminescence centers activated by Fe²⁺ and Fe³⁺ ions. The reduction in IL and PL bands intensity with increase of ion fluence might be attributed to degradation of Si-O (2ν₃) bonds, present on the surface of the sample.     

Reinforced silver-embedded silica matrix from the cheap silica source for the controlled release of silver ions

In this study, a reinforced silver-embedded silica matrix was designed by utilizing the interaction between the [AlO₄]⁻ tetrahedral and the Ag⁺ in sol-gel process using sodium silicate as a silica precursor. The Ag⁺ mole ratio in each sample was significantly varied to examine the influence of silver concentration on the properties of the final product. Aluminium ions were added to reinforce and improve the chemical durability of silver-embedded silica. A templated sample at Al/Ag = 1 atomic ratio was also synthesized to attempt a possibility of controlling porosity of the final product. Also, a sample neither embedded with silver nor templated was synthesized and characterized to serve as reference. The material at Al/Ag = 1 was found to have a desirable properties, compared to its counterparts, before and even after calcination up to 1000 °C. The results demonstrate that materials with desirable properties can be obtained by this unprecedented method while utilizing sodium silicate, which is relatively cheap, as a silica precursor. This may significantly boost the industrial production of the silver-embedded silicas for various applications.     

Thermal nonlinear refraction properties of Ag2S semiconductor nanocrystals with its application as a low power optical limiter

In this work, nonlinear refraction properties of 3 nm sized silver sulfide (Ag₂S) semiconductor nanocrystals dispersed in the dimethyl sulfoxide with varying concentrations are reported. Observation of the colloids far-field diffraction ring patterns indicates of large induced thermal nonlinear refraction in the medium. The thermally induced effective nonlinear refractive index due to nonlocal heat effect is characterized by Z-scan technique with a low power CW laser irradiation at 532 nm. This allows us to measure thermo-optic coefficient and effective nonlinear refractive index up to −1.52 × 10⁻⁷ cm²/W in the tested samples. Low power optical limiting, with low limiting thresholds is obtained in the samples based on thermal defocusing and self diffraction. The limiting thresholds of colloids at different Ag₂S nanocrystals concentrations are also reported.     

Fabrication of silver nanoparticles deposited on boehmite sol for surface enhanced Raman scattering

The composite consisting of silver nanoparticles deposited on boehmite hybrid was synthesized by NaBH₄ reduction technique. The morphology of the composite was studied by TEM, UV/Vis spectrophotometer and particle sizer. The size of the silver nanoparticles deposited on the surface of the boehmite ranged from 10 nm to 100 nm. The contact of silver nanoparticles increased by means of deposition of silver nanoparticles on the boehmite sol and the aggregation of the composites. This leads to the appearance of a shoulder at 450 nm in the UV-Vis absorption spectra with the addition of 0.15 mg and 1.5 mg boehmite. It was found that the intensity of the SERS in the case of the composite was higher than for silver colloids consisting of a concentration of silver greater than 3.2 mM.     

Synthesis and formation mechanism of Ag–Ni alloy nanoparticles at room temperature

Ag–Ni nanoparticles were prepared with a chemical reduction method in the presence of polyvinylpyrrolidone (PVP) used as a stabilizing agent. During the synthesis of Ag–Ni nanoparticles, silver nitrate was used as the Ag⁺ source while nickel sulfate hexahydrate was used as Ni²⁺ source. Mixed solutions of Ag⁺ source and Ni²⁺ source were used as the precursors and sodium borohydride was used as the reducing agent. Five ratios of Ag⁺/Ni²⁺ (9:1, 3:1, 1:1, 1:3, and 1:9) suspensions were prepared in the corresponding precursors. Ag–Ni alloy nanoparticles were obtained with this method at room temperature. Scanning electronic microscope (SEM), energy dispersive spectrum (EDS), high resolution transmission electron microscope (HRTEM) were used to characterize the morphology, composition and crystal structure of the nanoparticles. The crystal structure was also investigated with X-ray diffraction (XRD). In all five Ag/Ni ratios, two kinds of particle structures were observed that are single crystal structure and five-fold twinned structure respectively. Free energy of nanoparticles with different crystal structures were calculated at each Ag/Ni ratio. Calculated results revealed that, with identical volume, free energy of single crystal particle is lower than multi-twinned particle and the difference becomes smaller with the increase of particle size; increase of Ni content will lead the increase of free energy for both structures. Formation of different crystal structures are decided by the structure of the original nuclei at the very early stage of the reduction process.