Systematic investigation of enantiomer resolution of N-pivaloyl derivatized amino acid esters. Preparation of glass capillary columns coated with the chiral phase XE-60-L-val-pea

A laboratory working procedure is described for silanization of glass capillaries with bis(cyanopropyl)tetramethyldisiloxane, prior to coating with XE-60-L -valine-(S)-α-phenylethylamide as chiral stationary phase. GC columns thus prepared exhibit good inertness and no long-term deterioriation of enantioselectivity up to 220°C. A general procedure is given for derivatization of simple and of polyfunctional amino acids, in a batch mixture, simultaneously, and completely at both the N- and the C-terminus and all other protic functions. Within the seven series of N-pivaloyl amino acid esters tested (methyl to neopentyl), baseline separation is obtained for all R/S pairs, including the proline derivative.     

Preparation of high temperature stable glass capillary columns coated with PS-090 (20% diphenyl substituted CH3O-terminated polysiloxane) a selective stationary phase for the direct analysis of metal-porphyrin complexes

In this report we describe the coating of delonized glass surfaces with commercially available CH₃O-terminated diphenyl-dimethylpolysiloxane (PS-090). This new type of reactive, high temperature stable stationary phases withstands temperatures up to 430°C. As already reported for OH-terminated polymers, the underlying stabilization process is a condensation of methoxy groups of the phase with surface silanol groups arising from high temperature silylation. The good selectivity of this medium polar coating for substrates bearing π-electron systems is demonstrated by the separation of various metalloporphyrins.     

Assembly of poly(dopamine)/poly(acrylamide) mixed coatings by a single‐step surface modification strategy and its application to the separation of proteins using capillary electrophoresis

In this work, a facile approach was developed to modify a fused‐silica capillary inner surface based on poly(dopamine) and poly(acrylamide) mixed coatings for protein separation by capillary electrophoresis. The surface morphology, thickness, and chemical components of poly(dopamine)/poly(acrylamide) mixed coatings on glass slides and silicon wafers were studied by atom force microscopy, ellipsometry, and X‐ray photoelectron spectroscopy, respectively. The hydrophilicity and stability of the mixed coatings on glass slides were investigated by static water contact angle measurements. A comparative study of electroosmotic flow showed that the poly(dopamine)/poly(acrylamide) mixed coatings could provide effective suppression of electroosmotic flow. Meanwhile, the fast and efficient separations of the mixture of four alkaline proteins, the mixture of acidic, basic, and neutral proteins and egg white proteins were obtained by capillary electrophoresis. Furthermore, the consecutive protein separation runs and low RSDs of migration time demonstrated that these poly(dopamine)/poly(acrylamide) mixed coatings were capable of minimizing protein adsorption during the protein separation by using capillary electrophoresis.     

Modification of a Capillary for Electrophoresis by Electrostatic Self‐Assembly of an Enzyme for Selective Determination of the Enzyme Substrate

The integration of a separation capillary for capillary electrophoresis (CE) with an on‐column enzyme reaction for selective determination of the enzyme substrate is described. Enzyme immobilization is achieved by electrostatic assembly of poly(diallydimethylammonium chloride) (PDDA) followed by adsorption of a mixture of the negatively charged enzyme glucose oxidase (GOx) and anionic poly(styrenesulfonate) (PSS). The reaction of glucose with the GOx produces hydrogen peroxide which migrates the length of the capillary and is detected amperometrically at the capillary outlet. The enzyme reaction occurs during a capillary separation, allowing selective determination of the substrate in complex samples without the need for pre‐ or post‐separation chemical modification of the analyte. The enzyme reactor is found to have an optimal response to glucose when a 5 : 1 mixture of PSS:GOx is used. Under these conditions the limit of detection for glucose is found to be between 5.0×10^?4 and 1.3×10^?3 M, dependent upon the inner‐diameter of the capillary. The apparent Michaelis‐Menten constant for the enzyme reaction was determined to be 0.047 (±0.001) M and 0.0037 (±0.0007) M for a 50 and 10 μm inner‐diameter capillaries, respectively. These results indicate that the enzyme reaction is efficient, having enzyme kinetics similar to that of a reaction occurring in solution. This enzyme immobilization method was also applied to another enzyme, glutamate oxidase, yielding similar results.     

Increased thermostability of non-polar wall-coated open tubular columns

A method of deactivating the inner surface of glass capillary columns is described, which can be used at 350°C without detoriation. A non-polar liquid phase was prepared from a commercially available liquid phase which, when coated on a glass surface, can withstand temperatures of 325°C for isothermal analysis and 350°C for temperature-programmed analysis. After deactivation, the column was coated using the static coating method. Then it was conditioned, tested and kept for 48 hours at 35O°C before being used for the analysis of a mixture of chlorinated pesticides.     

Long pathlength, three-dimensional absorbance microchip

A long pathlength, three-dimensional U-type flow cell was microfabricated and evaluated for improved absorbance detection on a glass microdevice. A small diameter hole (75 μm) was laser etched in a thin glass substrate whose thickness (100 μm) defined much of the pathlength of the cell. This substrate was thermally bonded and sandwiched between two different glass substrates. The top substrate contained a typical injection cross and separation microchannel. Projecting out of the plane of the separation device was a 126 μm pathlength flow cell as defined by the laser etched hole and the attached microchannels. The flow cell was connected to a microchannel on the bottom substrate that led to a waste reservoir. The planar, flat windows on the top and bottom of this device made light introduction and collection a simple matter using a light emitting diode (LED) and microscope objective. The experimentally obtained detection limit for rhodamine B was determined to be 0.95 μM, which is nearly identical to the theoretical limit calculated by Beer's Law. A separation of three fluorescent dyes was performed, and direct comparisons were made between the transmittance changes through the narrow pathlength separation microchannel and the adjacent long pathlength, three-dimensional U-type flow cell.     

Stacking and simultaneous determination of estrogens in water samples by CE with electrochemical detection

A rapid and sensitive method based on transient ITP and field enhancement in CE with electrochemical detection at copper disk electrode was developed for the simultaneous separation and determination of three estrogens: estrone, 17β‐estradiol, and estriol. The effects of several important factors that influence the separation and detection were investigated. Under the optimum conditions, the estrogens could be separated in 0.06 mol/L sodium hydroxide solution within 14 min. With transient ITP by addition of 0.5% NaCl, a good linear response was obtained for three estrogens from 0.2 to 10 μmol/L, with correlation coefficients higher than 0.9993. The detection limits were 8.9 × 10^?8, 6.7 × 10^?8, and 1.1 × 10^?7 mol/L (S/N = 3) for estriol, 17β‐estradiol, and estrone, respectively. This method was successfully employed to analyze different water samples from waterworks, tap water, fishpond, and river samples with recoveries in the range of 90.8–108.9%, and RSDs < 4.69%. The satisfied results demonstrated that this method was of convenient preparation, high sensitivity, and good repeatability, which could be applied to the rapid determination of environmental water samples.     

Determination of Maleic Hydrazide in Potato Samples Using Capillary Electrophoresis with Dual Detection (UV‐Electrochemical)

A new method for the separation of a mixture of different herbicides (propham, chlorpropham, asulam, metamitron, linuron, and maleic hydrazide) using MEKC is proposed. A base‐line separation for the mixture of herbicides is achieved in less than six minutes. The detection limits obtained for all the herbicides were lower than 1.0 μM using UV detection. This separation method was used for the determination of maleic hydrazide in potato samples. If a dual (UV‐electrochemical) detection system is employed, chlorpropham can be also detected. The results obtained showed that electrochemical detection was ten folds more sensitive than UV detection for maleic hydrazide. The detection limit of the proposed method for maleic hydrazide employing electrochemical detection was 1.3 μg g^?1, this value is lower than 50 μg g^?1, which is the maximum residue level permitted for this plant growth regulator in potato samples. The results obtained in the work clearly demonstrate the advantage of using electrochemical detection coupled to capillary electrophoresis, using this detection the concentration limits are not compromised by miniaturization and the components required are simple and inexpensive.     

A new bonded stationary phase for the gas chromatographic separation of volatile priority pollutants and chlorinated pesticides

A new phenyl-cyanopropyl polymethylsiloxane stationary phase, DB-1301, which can be crosslinked and bonded to the fused silica surface, has been synthesized. The phase composition was optimized for the separation of 18 volatile priority pollutants, selected from the so-called “purgables” list because of problems associated with their resolution. The composition of the stationary phase was based on theoretical considerations of binary phase mixtures and window diagram prediction. Columns coated with this stationary phase are compatible with atom selective detectors, such as the electron capture detector. A mixture of 18 volatile priority pollutants and a mixture of chlorinated pesticides were used as test probes on a prototype 30 m × 0.32 mm fused silica column, containing a 1.0 μm film of DB-1301.     

Evaluation of graphitized glass capillary columns

The performance of graphitized glass capillary columns obtained by precoating the inner glass walls with graphitized carbon black has been evaluated. It has been shown that according to the amount of stationary phase coated such columns can operate in gas–liquid-solid chromatography and in gas–liquid chromatography so that tailor-made columns for specific separations can be prepared. The versatility of these columns is shown in the separation of various mixtures (terpenes, pesticides, isomeric species and others) of analytical importance.     

Simultaneous Chiral Separation of Geometry Isomers and Enantiomers of Nateglinide by Capillary Electrophoresis with Mixture of CD Derivations as Chiral Selector

Abstract

A capillary electrophoresis (CE) method for the simultaneous separation of geometry isomers and enantiomers of nateglinide was built. Several different dyclodextrin (CD) derivatives were tested for the chiral separation of nateglinide, and it was proved that ionic CDs [i.e., carboxymethy-β-CD (CM-β-CD) and sulphonic-β-CD (S-β-CD)] could show better chiral selectivity for both geometry isomers and enantiomers than the neutral CDs. The separation of geometry of both isomers and enantiomers of nateglinide was obtained by CE in a 75-µm i.d. × 60 cm (effective length 45 cm) fused-silica capillary at 11 kV voltage, while 30 mM phosphate (pH = 8.38) acted as running buffer and a mixture of 40 mM S-β-CD + 21 mM CM-β-CD served as chiral selector. The detective wavelength was set at 254 nm.     

Fabrication of a poly(styrene-octadecene-divinylbenzene) monolithic column and its comparison with a poly(styrene-divinylbenzene) monolithic column for the separation of proteins

In this paper, a poly(styrene-octadecene-divinylbenzene) (PS-OD-DVB) monolithic column was prepared in one step by introducing a C18 carbon chain as monomer. N,N-Dimethylformamide and decanol served as porogens to make a homogeneous polymerization mixture in a fused silica capillary (320 microm inner diameter). Its physical and chromatographic properties were compared with those of poly(styrene-divinylbenzene) (PS-DVB) monolithic column, which was also fabricated by in-situ polymerization in a fused silica capillary with the same inner diameter. Six standard proteins were used to evaluate the columns and their potential application for the separation of human hemoglobin was also discussed. It was shown that the PS-OD-DVB and PS-DVB monoliths appeared to have similar efficiency for rapid separation of six proteins within 3.5 min. The PS-OD-DVB monolith was found to have higher loading capacity and higher resolution for the separation of alpha and beta chains of hemoglobin because of the introduction of C18 carbon chains, and shows great potential for the separation of bio-macromolecules.     

Separation of basic proteins by capillary zone electrophoresis with coatings of a copolymer of vinylpyrrolidone and vinylimidazole

Capillary zone electrophoretic (CZE) separation of basic proteins has been achieved with capillary columns modified with copolymers of vinylpyrrolidone (VP) and vinylimidazole (VI). The copolymerization reaction is performed inside the capillary column and involves chemical bonding of the polymer to silica. The electroosmotic flow (EOF) is greatly decreased by this surface modification. The presence of positive charges on the coating surface, due to the cationic property of vinylimidazole at pH below 7, reduces the adsorption of basic proteins onto the silanol groups of the capillary surface. Acidic proteins are irreversibly adsorbed, but rapid separation and good performance reproducibility are obtained with basic proteins. In the case of capillaries modified with VP, the acidic and basic proteins are eluted within 10 min. In this work, we studied the effects of pH and buffer concentration on the magnitude of the EOF, as well as the effect of copolymer composition on the separation efficiency.     

Glass capillary gas chromatography-mass spectrometry at high temperatures. direct analysis of free base porphyrins and metal porphyrin complexes extracted from the serpiano oil shale

This contribution describes GC/MS analysis of natural petroporphyrin extracts containing alkylporphyrins either as vanadyl complexes or as demetalated free bases. The combination of high temperature glass capillary gas chromatography with mass spectrometry allows, for the first time, direct determination of electron impact mass spectra of separated alkylporphyrins, making additional purification and derivatization unnecessary. The separation is carried out on glass capillary columns coated with the high temperature-stable medium polar, OH-terminated, polysiloxane phases PS 086 and OV-225-OH. The paper gives detailed working directions for the preparation of the high temperature GC/MS-interface, and of the high temperature stable OV-225-OH columns (max. working temperature 390°C).     

Simultaneous separation and rapid determination of spironolactone and its metabolite canrenone in different pharmaceutical formulations and urinary matrices by capillary zone electrophoresis

The aim of this study was to develop a novel, sensitive, precise, simple, and rapid capillary zone electrophoresis method for the quality control of spironolactone in three different formulation types and a rapid simultaneous determination of the content of spironolactone and canrenone in urine samples using fluocinonide as an internal standard. After optimization of separation conditions, the electrolyte solution was the pH 5.5, 20 mM phosphate buffer containing 4.5 g/L sulfated‐β‐cyclodextrin, 15 kV of electric filed across the capillary applied at 25°C. A diode array detector was used, and the detection wavelength was 260 nm. Under optimum conditions, good linearity was achieved with correlation coefficients from 0.9976 to 0.9997. Detection limits were 0.56 and 0.20 μg/mL, and the quantitation limits were 1.87 and 0.67 μg/mL, respectively. Excellent accuracy and precision were obtained. Recoveries of the analytes varied from 100.8 to 103.1%. The results indicated that baseline separation of analytes was obtained and this method was suitable for quantitative determination of spironolactone in pharmaceutical preparations and rapid simultaneous determination of the content of spironolactone and its major metabolite canrenone in urine samples.     

Novel design of multicapillary arrays for high-throughput DNA sequencing

A novel approach to design and optimize linear multicapillary arrays (LMCAs) for high-throughput DNA sequencing is proposed. A significant increase in the number of capillary lanes is obtained due to the use of composite insertions alternately placed between working capillaries of the array and a specific combination of refractive indices of the DNA separation matrix, capillary glass, the insertions and a medium which surrounds the capillary array. Theoretical and experimental studies showed that in conjunction with a dual-side laser illumination scheme, the proposed LMCA design allows a simultaneous uniform irradiation of as many as 550 working capillaries.     

An air‐assisted flow‐gating interface for capillary electrophoresis

A new kind of flow gating interface (FGI) has been designed for online connection of CE with flow‐through analytical techniques. The sample is injected into the separation capillary from a space from which the BGE was forced out by compressed air. A drop of sample solution with a volume of 75 nL is formed between the outlet of the delivery capillary supplying the solution from the flow‐through apparatus and the entrance to the CE capillary; the sample is hydrodynamically injected into the CE capillary from this drop. The sample is not mixed with the surrounding BGE solution during injection. The functioning of the proposed FGI is fully automated and the individual steps of the injection process are controlled by a computer. The injection sequence lasts several seconds and thus permits performance of rapid sequential analyses of the collected sample. FGI was tested for the separation of equimolar 50 μM mixture of the inorganic cations K⁺, Ba²⁺, Na⁺, Mg²⁺, and Li⁺ in 50 mM acetic acid/20 mM Tris (pH 4.5) as BGE. The obtained RSD values for the migration times varied in the range 0.7–1.0% and the values for the peak area were 0.7–1.4%; RSD were determined for ten repeated measurements.     

Practical limitations of capillary gas chromatography

Glass capillary gas chromatography is a high resolution separation method which allows the qualitative and quantitative analysis of even complex mixtures, which may contain many components–also isomeric–in a wide range of volatilities, polarities and concentrations. The principal limitation of gas chromatographic application is given by an insufficient volatility of the species to be separated. Elevated temperatures have to be applied if the application range is to be extended and to achieve steep peak profiles, i.e. low detection limits at high resolution. The use of elevated temperatures is limited, of course, by the temperature stability of both the solvent (stationary liquid and support) and the solutes. The problems of trace analysis for low volatility compounds at high resolution and its limitational parameters regarding sampling, separation and detection are discussed. The applicability of glass capillary columns in this field is influenced by the following parameters: tailing behaviour; irreversible adsorption of polar and decomposition of unstable solutes; thermal stability of stationary liquid (including the support deactivation); separation efficiency and sample capacity (film thickness). Multidimensional gas chromatography using capillary columns coupled either with a packed or another capilllary column for preseparations may be applied with advantage in the analysis of complex mixtures.     

Statistical Optimization Applied to Simultaneous Determination of Maprotiline, Desipramine, and Moclobemide by Capillary Zone Electrophoresis

Summary. A method of Capillary Zone Electrophoresis (CZE) for separation of three most-frequently prescribed antidepressants in the market: maprotiline, desipramine, and moclobemide was developed. The proposed method is fully validated for a ternary laboratory mixture but it is also suitable for individual determination of the investigated components in pharmaceutical dosage forms. Since the preliminary investigations did not show complete separation because of close migration time of desipramine and maprotiline, a complete set, 2³ experimental design was applied. All the factors that affect separation as well as their mutual interactions were investigated. Voltage, temperature of capillary and the pH of phosphate buffer were independent variables or factors to be investigated in two levels. Applying response surface methodology, from experimental points the appropriate graphs were constructed and optimal chromatographic conditions for the separation were defined. The optimum conditions were: running voltage of 20 kV, phosphate buffer (pH = 2.35), temperature 25°C, and UV detection at 200 nm. An uncoated (fused silica) capillary (50 μm i.d.) with a total length of 50 cm and a distance of 47 cm between the injection and detection points was used.     

Direct coupling of CO2 fluid extraction with capillary supercritical fluid chromatography

Summary An interface described in the literature was modified to accommodate small sample quantities. The simple and inexpensive method can be used to obtain rapid qualitative sample information of complex matrices by extraction in sub- or supercritical conditions (SFE) with a concurrent separation by capillary supercritical fluid chromatography (CSFC). Compared to traditional solvent extraction methods the potential for analyte degradation and contamination is minimized resulting in reduced sample amount necessary for extraction and separation, and also in faster extractions. Complex matrices of a plastic material, a natural product and a soil spiked with a substituted hydrocarbon test mixture were analyzed to show the usefulness of the interface.