Syntheses and characterization of copper(II) complexes with Schiff-base ligands derived from ethylenediamine,diphenylethylenediamine and nitro,bromo and methoxy salicylaldehyde

Copper(II) quelates with Schiff bases derived from ethylenediamine, 1R,2R-(+)- or 1S,2S-(−)-1,2-diphenylethylenediamine and 5-X-salicylaldehyde (X=OCH₃, H, Br, NO₂) have been synthesized and characterized by elemental analysis and IR and UV-visible spectroscopies. The ORD and CD spectra of the chiral ligands and their related complexes have also been measured. The absorption and CD spectra of the metal complexes in the visible region are consistent with near square planar coordination geometries. Trends in absorption spectra over the series of complexes can be correlated with electronic effects of the substituents at position 5 of the salicylaldehyde. The sign patterns of the CD spectra in both UV and visible regions suggest the prevalence of δ and λ conformations for the chelate ring in the complexes of Schiff bases derived, respectively, from R,R- and S,S-diamines. Specific features of the CD spectra of the metal complexes are discussed in terms of the exciton chirality method.     

α‐Propargyl amino acid‐derived optically active novel substituted polyacetylenes: Synthesis,secondary structures,and responsiveness to ions

Novel optically active substituted acetylenes HC? CCH₂CR¹(CO₂CH₃)NHR² [(S)‐/(R)‐ 1 : R¹ = H, R² = Boc, (S)‐ 2 : R¹ = CH₃, R² = Boc, (S)‐ 3 : R¹ = H, R² = Fmoc, (S)‐ 4 : R¹ = CH₃, R² = Fmoc (Boc = tert‐butoxycarbonyl, Fmoc = 9‐fluorenylmethoxycarbonyl)] were synthesized from α‐propargylglycine and α‐propargylalanine, and polymerized with a rhodium catalyst to provide the polymers with number‐average molecular weights of 2400–38,900 in good yields. Polarimetric, circular dichroism (CD), and UV–vis spectroscopic analyses indicated that poly[(S)‐ 1 ], poly[(R)‐ 1 ], and poly[(S)‐ 4 ] formed predominantly one‐handed helical structures both in polar and nonpolar solvents. Poly[(S)‐ 1a ] carrying unprotected carboxy groups was obtained by alkaline hydrolysis of poly[(S)‐ 1 ], and poly[(S)‐ 4b ] carrying unprotected amino groups was obtained by removal of Fmoc groups of poly[(S)‐ 4 ] using piperidine. Poly[(S)‐ 1a ] and poly[(S)‐ 4b ] also exhibited clear CD signals, which were different from those of the precursors, poly[(S)‐ 1 ] and poly[(S)‐ 4 ]. The solution‐state IR measurement revealed the presence of intramolecular hydrogen bonding between the carbamate groups of poly[(S)‐ 1 ] and poly[(S)‐ 1a ]. The plus CD signal of poly[(S)‐ 1a ] turned into minus one on addition of alkali hydroxides and tetrabutylammonium fluoride, accompanying the red‐shift of λ_max. The degree of λ_max shift became large as the size of cation of the additive. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis and solution properties of poly(trans-5-ethylproline). A slow mutarotating substituted polyproline

An optically active polypeptide, poly(trans-5-ethylproline) (PT5EP) was synthesized and its solution properties were observed to investigate the conformational changes with various conditions. The trans-5-ethyl substitution on polyproline showed noticeable perturbed effects on the conformations of the polypeptide as well as mutarotation of the polypeptide in solution. Circular dichroism (CD) spectra suggested that the polypeptide existed in a poly(L -proline) form-I-type helix and mutarotated slowly to an intermediate conformation in which some of the amide bonds had rotated to a trans conformation. In trifluoroethanol (TFE) solution the polymer took more than 20 days to change from a form-I-type helix conformation, in which CD bands for D -PT5EP are at 199.5 ± 1.0 (positive), 115.5 ± 0.5 (negative), and around 238 nm (positive), to an intermediate conformation. Upon addition of trifluoroacetic acid (TFA) to a TFE solution, the polymer was transformed to form-II-type polymers. Even a greater change in conformation was observed in a solution of TFA or in LiClO₄-TFE. The overall change of the intensity ratio R_CD of positive to negative CD bands of D -PT5EP was from 0.6–0.7 to 30. Reverse mutarotation toward the original form I was observed when n-butyl alcohol, water, or THF was added to a solution containing the form II polymer. A blue shift of the UV spectra and a change in the NMR spectrum also supported the concept of this conformational change.     

一对手性Salen型席夫碱对映体的合成、结构与生物活性

采取分步反应法以1R, 2R-环己二胺(或1S, 2S-环己二胺)先后与2-羟基萘甲醛和水杨酸苯酯反应, 合成了一对手性Salen型席夫碱对映体:1R-(2-羟基苯甲酰亚胺)-2R-(2-羟基萘甲亚胺)环己烷(1a)和1S-(2-羟基苯甲酰亚胺)-2S-(2-羟基萘甲亚胺)环己烷(1b), 对其进行了单晶结构、圆二色光谱、元素分析、红外光谱表征及生物活性实验。单晶结构与圆二色光谱分析表明1a和1b互为对映体;生物活性实验显示1a具有一定的抑菌活性。     

Mechanical Properties of Uniaxially Cold-Drawn Films of Poly[(R)-3-hydroxybutyrate] and Its Copolymers

Uniaxially oriented films of poly[(R)-3-hydroxybutyrate] (P(3HB)) and two kind of copolymers, poly[(R)-3-hydroxybutyrate-co-8%-[R]-3-hydroxyvalerate] (P(3HB-co-8%-3HV)), and poly[(R)-3-hydroxybutyrate-co-[R]-5%-3-hydroxyhexanoate] (P(3HB-co-5%-3HH)), were prepared by cold-drawing from amorphous preforms at temperatures near to the respective glass transition temperatures. Melt-quenched films in a rubber state could be stretched reproducibly to a draw ratio of 500%∼1800%, and subsequent annealing under tension led to improvement of the tensile strength and Young's modulus. Two-step drawing resulted in further improvement of the mechanical properties. The mechanical properties remained unchanged after storing for 6 months at room temperature, suggesting that high orientation and crystallinity suppress the secondary crystallization.     

Polymerization of optically active disubstituted acetylene monomers by Pd catalyst bearing bulky phosphine ligand

Chloro- and aryl-substituted acetylene monomers having an optically active group were polymerized by a Pd catalyst [(^tBu₃P)PdMeCl] bearing a bulky phosphine ligand, and by MoCl₅ for comparison. The corresponding disubstituted acetylene polymers with M_n's = 2000–19,500 and 6900–10,800 were obtained in 29–83% and 11–62% yields when the Pd and Mo catalysts were used, respectively. The formation of polyacetylenes, poly[(R)- 1p ], poly[(R)- 1m ], and poly[(S)- 2p ] were confirmed by SEC and the presence of a Raman scattering peak based on the alternating double bonds of the main chain. Pd-based poly[(R)- 1m ] exhibited CD signals around 350 nm assignable to a certain secondary structure, while Mo-based poly[(R)- 1m ] did not. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 3011–3016     

Circular Dichroism of Tricarbonyl(diene)iron Complexes. The Octant Rule Applied to Ketones Perturbed by Remote Fe(CO)3 Groups. Crystal Structure of (±)-Tricarbonyl[(1RS,4RS,5RS,6SR)-C5,6,C-η-(5,6,7,8-tetramethylidene-2-bicyclo[2.2.2]octanone)]iron

The preparation and the CD spectra of optically pure (+)-trans-μ-[(1R,4S,5S,6R,7R,8S)-C,5,6,C -η : C,7,8,C-η-(5,6,7,8-tetramethylidene-2-bicyclo [2.2.2]octanone)]bis(tricarbonyliron) ((+)- 7 ) and (+)-tricarbonyl[(1S,4S,5S,6R)-C-5,6,C-η-(5,6,7,8,-tetramethylidene-2-bicyclo[2.2.2]octanone)]iron ((+)- 8 ), and of its 3-deuterated derivatives (+)-trans-μ-[(1R,3R,4S,5S,6R,7R,8S)-C,5,6,C-η : C,7,8,C-η-5,6,7,8-tetramethylidene(3-D)-2-bicyclo[2.2.2]-(octanone)]bis(tricarbonyliron) ((+)- 11 ) and (+)-tricarbonyl[(1S,3R,4S,5S,6R)-C-5,6,C- η-(5,6,7,8-tetramethylidene(3-D)-2-bicyclo[2.2.2]octanone)]iron ((+)- 12 ) are reported. The chirality in (+)- 7 and (+)- 8 is due to the Fe(CO)₃ moieties uniquely. The signs of the Cotton effects observed for (+)- 7 and (+)- 8 obey the octant rule (ketone n→π*_CO transition). Optically pure (?)-3R-5,6,7,8-tetramethylidene(3-D)-2-bicyclo[2.2.2]octanone ((?)- 10 ) was prepared. Its CD spectrum showed an ‘anti-octant’ behaviour for the ketone n→π*_CO transition of the deuterium substituent. The CD spectra of the alcoholic derivatives (?)-trans-μ-[(1R,2R,4S, 5S,6R,7R,8S)-C,5,6,C-η : C,7,8,C- η-(5,6,7,8-tetramethylidene-2-bicyclo[2.2.2]octanol)]bis(tricarbonyliron) ((?)- 2 ) and (?)-tricarbonyl- [(1S,2R,4S,5S,6R)- C,5,6,C- η-(5,6,7,8-tetramethylidene-2-bicyclo[2.2.2]octanol)]iron ((?)- 3 ) and of the 3-denterated derivatives (?)- 5 and (?)- 6 are also reported. The CD spectra of the complexes (?)- 2 , (?)- 3 , (+)- 7 , and (+)- 8 were solvent and temperature dependent. The ‘endo’-configuration of the Fe(CO)₃ moiety in (±)- 8 was established by single-crystal X-ray diffraction.     

A Chiral Hemiporphyrazine Derivative: Synthesis and Chiroptical Properties

The synthesis of an optically active hemiporphyrazine with chiral binaphthyl substituents ( 1 ) is reported, providing the first example of the incorporation of an intrinsically chiral moiety into the macrocyclic core of a hemiporphyrazine analogue. A negative circular dichroism (CD) signal is observed in the 325–450 nm region of the CD spectrum of (S,S)‐ 1 , while mainly positive bands are observed in the 220–325 nm region. Mirror symmetry is observed across the entire wavelength range of the CD spectra of (R,R)‐ 1 and (S,S)‐ 1 . An irreversible one‐electron oxidation wave with an onset potential at 1.07 V is observed by cyclic voltammetry, along with a reversible one‐electron reduction wave at ?0.85 V. Density functional calculations reproduce the experimentally observed data and trends, and provide further insight into the nature of the electronic transitions.     

一对手性Salen型席夫碱对映体的合成、结构与生物活性

采取分步反应法以1R,2R-环己二胺(或1S,2S-环己二胺)与2-羟基萘甲醛和水杨酸苯酯反应,合成了一对手性Salen型席夫碱对映体:1R-(2-羟基苯甲酰亚胺)-2R-(2-羟基萘甲亚胺)环己烷(1a)和1S-(2-羟基苯甲酰亚胺)-2S-(2-羟基萘甲亚胺)环己烷(1b),对其进行了单晶结构、圆二色光谱、元素分析、红外光谱表征及生物活性实验。单晶结构与圆二色光谱分析表明1a和1b互为对映体;生物活性实验显示1a具有一定的抑菌活性。     

The circular dichroism spectrum of S(+)-sec-butyl benzene

The absorption and CD spectra of S(+)-sec-butyl benzene are reported in the spectral region 195–180 nm. The CD spectrum contains two bands of opposite sign at 190.5 nm and 187 nm. The results are interpreted to confirm previous results for 1-methylindan in this spectral region. The observed bands are assigned to the state derived from the benzene E_2g state.     

The synthesis of poly(phenylacetylene)s with bulky chiral silyl groups and the thermal stability of their helical conformation

The polymerization of (−)‐p‐[(tert‐butylmethylphenyl)silyl]phenylacetylene (t‐BuMePhSi*PA) and (+)‐p‐[{methyl(α‐naphthyl)phenyl}silyl]phenylacetylene (MeNpPhSi*PA) with the [(nbd)RhCl]₂ Et₃N catalyst yielded polymers with very high molecular weights over 2 × 10⁶ in high yields. The optical rotations of the formed poly(t‐BuMePhSi*PA) and poly(MeNpPhSi*PA) were as high as −356 and −150° (c = 0.11 g/dL in CHCl₃), respectively. The circular dichroism (CD) spectrum of poly(t‐BuMePhSi*PA) in CHCl₃ exhibited very large molar ellipticities ([θ]) in the UV region: [θ]_max = 9.2 × 10⁴ ° · cm² · dmol⁻¹ at 330 nm and −8.0 × 10⁴ ° · cm² · dmol⁻¹ at 370 nm. The [θ]_max values of poly(MeNpPhSi*PA) were also fairly large: [θ]_max = 7.1 × 10⁴ ° · cm² · dmol⁻¹ at 330 nm and −5.3 × 10⁴ ° · cm² · dmol⁻¹ at 370 nm. The optical rotations of poly(t‐BuMePhSi*PA) and poly(MeNpPhSi*PA), measured in tetrahydrofuran, chloroform, and toluene solutions, were hardly dependent on temperature in the range 22–65 °C. The CD effects of these polymers hardly changed in the temperature range 28–80 °C, either. These results indicate that the helical structures of these polymers are thermally appreciably stable. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 71–77, 2001     

THE WHITE MEMBRANE OF CRYSTALLINE BACTERIOOPSIN IN HALOBACTERIUM HALOBIUM STRAIN R1mW AND ITS CONVERSION INTO PURPLE MEMBRANE BY EXOGENOUS RETINAL

Abstract— A new strain isolated from Halobacterium halobium designated R₁mW, contained negligible amounts of isoprenoid pigments, had a yellowish white color due to respiratory pigments and showed no proton movement in response to light. However, addition of all-trans-retinal converted R₁mW into purple cells. Formation of both halorhodopsin and bacteriorhodopsin was indicated by induction of light-dependent proton uptake and release, respectively. Both haloopsin and bacterioopsin were thus postulated to be present in R₁mW. Electron micrographs of freeze-fractured cytoplasmic membranes revealed patches in a hexagonal array of trimeric particles, comparable to the purple membrane structure. These white membrane patches were isolated by procedures similar to those for the purple membrane. The white membrane's buoyant density was about 1.18 g/m/, and its main component migrated on sodium dodecylsulfate polyacrylamide gels at the same rate as bacteriorhodopsin. The white membrane showed only a small absorption peak at ～410nm due to contaminating respiratory pigments and a strong absorption at around 275 nm and shorter wavelengths. The white membrane was thus considered to be mainly composed of bacterioopsin, which was readily converted into bacteriorhodopsin by an addition of all-trans-retinal. The absorption and CD spectra of the white membrane were measured before and after addition of retinal. The molar extinction coefficient of dark-adapted bacteriorhodopsin formed was determined to be 53000M^?1 cm^?1 at 560 nm from retinal binding studies. The CD spectrum of the white membrane was negligible in the visible region but showed several bands assigned to aromatic and backbone structures in the UV region. Retinal addition caused considerable changes in the spectrum, yielding the CD spectrum of crystalline purple membrane bacteriorhodopsin. The white membrane thus appears to be a preparation suitable for structure-function studies of bacteriorhodopsin.     

β-Butyrolactone polymerization initiated with tetrabutylammonium carboxylates: A novel approach to biomimetic polyester synthesis

The anionic ring-opening polymerizations of (R,S)-β-butyrolactone and (S)-β-butyrolactone initiated with tetrabutylammonium salts of carboxylic acids as initiators were investigated. Poly[(R,S)-3-hydroxybutyrate] and poly[(R)-3-hydroxybutyrate], with relatively high molecular weights (170,000 and 35,000, respectively) and low molecular weight distributions, were synthesized. Moreover, biomimetic poly(3-hydroxybutyrate)s with well-defined microstructures and predictable iso-dyad contents were obtained. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2184–2189, 2002     

Synthesis and conformation of poly(L-azetidine-2-carboxylic acid-L-proline) and poly([L-proline]3-L-azetidine-2-carboxylic acid)

The synthesis, characterization, and conformational assessment of poL y(L -Aze-L -Pro) and poly[(L -Pro)₃-L -Aze] are reported. The polymers were prepared by using the pentachlorophenol active ester as the polymerizable tetrapeptide derivatives. The copolymer, poly(L -Aze-L -Pro), assumes a Form II helix in polar solvents, and is converted into a form I-like helix at a critical solvent composition of ethanol to trifluoroethanol. The CD spectrum of this Form I-like conformation of poly(L -Aze-L -Pro) is similar to that of poly(trans-5-isopropyl-L -proline), indicating that the rigid four-membered ring at the alternating position can lock in the structure by a mechanism similar to that of a bulky substituent at the trans-5-position of proline. The helix conformation of this copolymer was unfolded in a 0.2M CaCl₂ aqueous solution. In contrast to poly(L -Aze-L -Pro), the copolymer of poly[(L -Pro)₃-L -Aze] contains both cis and trans peptide bond geometry when dissolved in a 90:10 ETOH-H₂O mixture. The conversion of the mixed conformation of poly[(L -Pro)₃-L -Aze)] into a polyproline Form II-like structure occurred in highly polar solvent environments such as water.     

Asymmetric anionic polymerization of optically active N-1-cyclohexylethylmaleimide

Chiral (S)-(−)-N-1-cyclohexylethylmaleimide [(S)-CEMI] and (R)-(+)-N-1-cyclohexylethylmaleimide [(R)-CEMI] were synthesized successfully and then polymerized with chiral complexes of (−)-sparteine or (S,S)-(1-ethylpropylidene)bis(4-benzyl-2-oxazoline) [(S,S)-Bnbox] and organometal as initiators in toluene or tetrahydrofuran to obtain optically active polymers. The effects of the polymerization conditions on the optical activity and structure of poly(N-1-cyclohexylethylmaleimide)s were investigated with gel permeation chromatography, circular dichroism, specific rotation, and ¹³C NMR measurements. Poly[(R)-CEMI] obtained with dimethylzinc (Me₂Zn)/(S,S)-Bnbox had the highest specific rotation ([α]₄₃₅ = +323.7°). Complexes of Bnbox and diethylzinc or Me₂Zn were used very effectively as chiral initiators for the asymmetric anionic polymerization of (S)-CEMI and (R)-CEMI. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4682–4692, 2004     

Electron donor-acceptor complexes in polypeptides. 3. Optical activity of intra-and inter-molecular charge-transfer associated with absorption bands

Optical activity, i. e. circular dichroism (CD) and optical rotatory dispersion (ORD) associated with charge-transfer (CT) absorption bands were found for intra- and intermolecular electron-donor-acceptor (EDA)-complexes containing centers of configurational asymmetry.     

Aggregation behavior of polystyrene‐b‐poly(ethylene/butylene)‐b‐polystyrene triblock copolymer in N‐methylpyrrolidone

Solution property of hydrogenated polystyrene‐b‐poly(ethylene/butylene)‐b‐polystyrene triblock copolymer (SEBS copolymer) was studied by using static light scattering and dynamic light scattering for cyclohexane and N‐methylpyrrolidone (NMP) solutions. From the values of dimensionless parameters ρ, defined as the ratio of radius of gyration 〈S²〉^1/2 to hydrodynamic radius R_H, and solubility parameters, SEBS copolymer proved to exist as single chain close to random coil in nonpolar cyclohexane, whereas aggregate into the core‐shell micelle consisting of poly(ethylene/butylene) (PEB) core surrounded by PS shell in polar NMP. The core‐shell micelle formed in NMP is composed of 65 polymer chains, having three times larger average chain density (d = 0.12 g cm^?3) than a single polymer chain (d = 0.04 g cm^?3) in cyclohexane. The comparison with the aggregation behaviors in other solvents demonstrated that the aggregate compactness of the copolymer depended largely on solvent polarity, resulting in formation of the highly dense PEB core (R_c = 4.5 nm) and the thick PS shell (ΔR = 22.9 nm) in high‐polar NMP. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 588–594, 2010     

Non-classical control of solid-state aggregation-induced enhanced circularly polarized luminescence in chiral perylene diimides

Organic fluorescent molecules are gaining importance because of their potential applications in many devices. Optically active N,N′-bis((1R)-1-naphthylethyl)perylene-3,4,9,10-tetracarboxylic diimide [(R,R)-1-BNP] and N,N′-bis((1R)-2-naphthylethyl)perylene-3,4,9,10-tetracarboxylic diimide [(R,R)-2-BNP] and their antipode, [(S,S)-1-BNP and (S,S)-2-BNP], emit aggregation-induced enhanced (AIEnh) circularly polarized luminescence (CPL) on both a solid organic polymer film (poly(methyl methacrylate)) and solid inorganic KBr pellet. An opposite chirality is essential for generating CPL of inverted sign. However, a pair of enantiomeric organic molecules may not always be easy to prepare. Interestingly, the chiral perylene fluorophores synthesized in this study can emit both positive and negative AIEnh-CPL in the solid state, depending on their position on the naphthylene groups. In addition, no CPL was observed in these compounds from their dilute solutions.     

Synthesis of optically active polynucleotide analogs with poly(vinyl alcohol)s as backbones and adenine and 5-bromouracil derivatives as pendants

The optically active polynucleotide analogs were prepared by grafting nucleic acid base derivatives onto poly(vinyl alcohol). The (R)-ethyl 2-(5-bromouracil-1-yl)propanoate was obtained either by reaction of 5-bromouracil sodium salt with (S)-ethyl 2-[(methylsulfonyl)oxy]propanoate or reaction of 5-bromouracil with (S)-ethyl lactate in the presence of triphenyl phosphine and diethyl azodicarboxylate. Subsequent hydrolysis of the ester is aqueous acid provided the optically pure (R)-bromouracilypropanoic acid. The monomer model compounds were prepared by an esterification reaction of the pendant groups with 3-pentyl alcohol in the presence of dicyclohexylcarbodiimide and a catalytic amount of 4-pyrrolidinopyridine. Poly(vinyl alcohol) underwent reaction with the (R)-bromouracilylpropanoic acid or the (R)-adeninylpropanoic acid in the presence of dicyclohexylcarbodiimide and a catalytic amount of 4-pyrrolidinopyridine. The resulting polymers were optically active and percents grafting were almost quantitative.     

Homologous series of alkylsilylphenyl‐substituted poly (p‐phenylenevinylene)s for light‐emitting diodes

Substituent‐induced electroluminescence polymers—poly[2‐(2‐dimethyldodecylsilylphenyl)‐1,4‐phenylenevinylene] [(o‐R₃Si)PhPPV], poly[2‐(3‐dimethyldodecylsilylphenyl)‐1,4‐phenylenevinylene] [(m‐R₃Si)PhPPV], and poly[2‐(4‐dimethyldodecylsilylphenyl)‐1,4‐phenylenevinylene] [(p‐R₃Si)PhPPV]—were synthesized according to the Gilch polymerization method. The band gap and spectroscopic data were tuned by the dimethyldodecylsilyl substituent being changed from the ortho position to the para position in the phenyl side group along the polymer backbone. The weight‐average molecular weights and polydispersities were 8.0–96 × 10⁴ and 3.0–3.4, respectively. The maximum photoluminescence wavelengths for (o‐R₃Si)PhPPV, (m‐R₃Si)PhPPV, and (p‐R₃Si)PhPPV appeared around 500–530 nm in the green emission region. Double‐layer light‐emitting diodes with an indium tin oxide/poly(3,4‐ethylenedioxythiophene)/polymer/Al configuration were fabricated with these polymers. The turn‐on voltages and the maximum brightness of (o‐R₃Si)PhPPV, (m‐R₃Si)PhPPV, and (p‐R₃Si)PhPPV were 6.5–8.7 V and 1986–5895 cd/m², respectively. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2347–2355, 2004