Additions and intramolecular migrations of nucleophiles in cationic diruthenium μ-allenyl complexes

The diruthenium μ-allenyl complex [Ru₂(CO)(NCMe)(μ-CO){μ-η¹:η²-C(H)CC(Me)(Ph)}(Cp)₂][BF₄], 3b, reacts with halide anions to yield the neutral derivatives [Ru₂(CO)₂(X){μ-η¹:η²-C(H)CC(Me)(Ph)}(Cp)₂] [X = Cl, 4b; X = Br, 4c; X = I, 4d]. Complex 4b undergoes isomerization to the unprecedented bridging vinyl-chlorocarbene species [Ru₂(CO)(μ-CO){μ-η¹:η³- C(Cl)C(H)C(Me)(Ph)}(Cp)₂], 10, upon filtration of a CH₂Cl₂ solution through an alumina column.Complex 3b reacts with an excess of NaBH₄ to give five products: the allene complex [Ru₂(CO)₂{μ-η²:η²- CH₂CC(Me)(Ph)}(Cp)₂], 5; the hydride species trans-[Ru₂(CO)₂(μ-H){μ-η¹:η²-CHCC(Me)(Ph)}(Cp)₂], 6, and cis-[Ru₂(CO)₂(μ-H){μ-η¹:η²-CHCC(Me)(Ph)}(Cp)₂], 8; the vinyl-alkylidene [Ru₂(CO)(μ-CO){μ-η¹:η³- C(H)C(H)C(Me)(Ph)}(Cp)₂], 9; and the cluster [Ru₃(CO)₃(μ-H)₃(Cp)₃], 7.Studies on the thermal stabilities of 5, 6, 8 and 9 have suggested a plausible mechanism for the formation of these complexes and for the synthesis of 10.     

Cluster-containing carbon-rich molecules: Reactions of ruthenium cluster carbonyls with {Au(PR3)}2(μ-CCCC) (R = Ph, tol)

Complexes containing C₄ ligands attached to one or two AuRu₃ clusters by conventional σ, 2π interactions have been obtained from reactions between (R₃P)AuC≡CC≡CAu(PR₃) (R = Ph, tol) or Au(C≡CC≡CH){P(tol)₃} and either Ru₃(CO)₁₂, Ru₃(CO)₁₀(NCMe)₂ or Ru₃(μ-dppm)(CO)₁₀. The X-ray determined structures of {(R₃P)AuRu₃(CO)₉}₂(μ₃,η²:μ₃,η²-C₂C₂) [R = Ph (1) (three solvates), tol (2)], AuRu₃{μ₃,η²-C₂C≡CAu(PPh₃)}(CO)₉(PPh₃) (3) and {(Ph₃P)AuRu₃(μ-dppm)(CO)₇} (μ₃,η²:μ₃,η²-C₂C₂){Ru₃(μ-H)(μ-dppm)(CO)₇} (4) are reported.     

Ruthenium cluster chemistry: Monodentate bis(diphenylphosphino)acetylene-ligated cluster modules in chain and dendrimer formation

Reaction of Ru₃(μ-dppm)(CO)₁₀ [dppm = bis(diphenylphosphino)methane] with one equivalent of dppa [dppa = bis(diphenylphosphino)acetylene] afforded Ru₃(μ-dppm)(CO)₉(η¹-dppa) which possesses a monodentate dppa ligand,an X-ray structural study revealing that all phosphorus donor atoms are arranged in equatorial coordination sites with respect to the triruthenium cluster plane.Reaction of Ru₃(CO)₉(NCMe)₃ with excess dppa afforded fair yields of Ru₃(CO)₉(η¹-dppa)₃,which possesses three monodentate dppa ligands.Reaction of three equivalents of Ru₃(μ-dppm)(CO)₉(η¹-dppa) with Ru₃(CO)₉(NCMe)₃ or reaction of Ru₃(CO)₉(η¹-dppa)₃ with excess Ru₃(μ-dppm)(CO)₁₀ afforded low yields of the dodecanuclear first-generation dendrimer Ru₃(CO)₉{PPh₂C₂PPh₂Ru₃(μ-dppm)(CO)₉}₃.Reaction of WIr₃(μ-CO)₃(CO)₈(η-C₅Me₅) with excess Ru₃(μ-dppm)(CO)₉(η¹-dppa) afforded fair yields of the decanuclear dppa-bridged tri-cluster WIr₃(CO)₉{PPh₂C₂PPh₂Ru₃(μ-dppm)(CO)₉}₂(η-C₅Me₅).     

Conversion of allene into μ-dimethylcarbene at a diruthenium centre

Treatment of [Ru₂(CO)(μ-CO) {μ-C(O)C₂Ph₂} (η-C ₅H₅)₂] with allene in toluene at 100°C displaces diphenylacetylene and produces [Ru(CO)(η-C₅H₅)-{η³-C₃H₄Ru(CO)₂(η-C₅H₅)}]; upon protonation a 1-methylvinyl cation [Ru₂(CO)₂(μ-CO){μ-C(Me)CH₂}(η-C₅H₅)₂]⁺ is formed which undergoes nucleophillic attack by hydride to yield the μ-dimethylcarbene complex [Ru₂(CO)₂-(μ-CO)(μ-CMe₂)(η-C₅H₅)₂].     

Electrophilic additions to unsaturated systems : By P.B.D. De la Mare and R. Bolton,Elsevier Scientific Publ. Co., Amsterdam and New York, 2nd Edition, 1982, xiii + 377 pages,U.S. $91.50, Dutch Fl. 215.00

The metalmetal double-bonded μ-alkyne complex [Ru₂(μ-CO)(μ-C₂Ph₂) (η-C₅H₅)₂] (1) reacts with diazomethane at 0°C to yield Ru₂(CO)(η-CH₂) {μ-C(Ph)C(Ph)CH₂} (η-C₅H₅)₂] (2) incorporating two methylene units, one bridging the metal atoms and one linked with the alkyne. Upon heating, a second carboncarbon bond formation occurs to link the methylene groups and give [Ru₂(CO)(μ-CO) {μ-C(Ph)C(Ph)C(H)Me} (η-C₅H₅)₂ (3); the structures of 1 and 2 were established by X-Ray diffraction.     

Synthesis of a series of new ruthenium organometallic complexes derived from pyridine‐imine ligands and their catalytic activity in oxidation of secondary alcohols

Reactions of pyridine imines [C₅H₄N‐2‐C(H) = N‐C₆H₄‐R] [R = H (1), CH₃ (2), OMe (3), CF₃ (4), Cl (5), Br (6)] with Ru₃(CO)₁₂ in refluxing toluene gave the corresponding dinuclear ruthenium carbonyl complexes of the type {μ‐η²‐CH[(2‐C₅H₄N)(N‐C₆H₄‐R)]}₂Ru₂(CO)₄(μ‐CO) [R = H (7); CH₃ (8); OMe (9); CF₃ (10); Cl (11); Br (12)]. All six novel complexes were separated by chromatography, and fully characterized by elemental analysis, IR, NMR spectroscopy. Molecular structures of 7, 10, 11, and 12 were determined by X‐ray crystal diffraction. Further, the catalytic performance of these complexes was also tested. The combination of {μ‐η²‐CH[(2‐C₅H₄N)(N‐C₆H₄‐R)]}₂Ru₂(CO)₄(μ‐CO) and NMO afforded an efficient catalytic system for the oxidation of a variety secondary alcohols.     

Unusual tetra- and penta-ruthenium complexes from linking of ethylidyne and vinylidene ligands

The complexes [Ru₂(CO)₂(μ-CO)(μ-CMe)(η-C₅H₅)₂]^? and [Ru₂CO₂(μ-CO)(μ-CCH₂)(η-C₅H₅)₂] react together to give [{Ru₂CO)₃(η-C₅H₅)₂}₂(μ-CMeCHCH)]⁺ and [{Ru₃(CO)₃(η-C₅H₅)₃}(μ-CCH₂CHC){Ru₂(CO)₃(η-C₅H₅)₂}], each characterised by X-ray diffraction. The former results from ethylidyne-vinylidene linking followed by an alkylidyne to vinyl rearrangement.     

Cationic Heterocycles as Ligands: Synthesis and Reactivity with Anionic Nucleophiles of Cationic Triruthenium Clusters Containing C‐Metalated N‐Methylquinoxalinium or N‐Methylpyrazinium Ligands

The cationic cluster complexes [Ru₃(CO)₁₀(μ‐H)(μ‐κ²N,C‐L¹Me)]⁺ ( 3 ⁺; HL¹=quinoxaline) and [Ru₃(CO)₁₀(μ‐H)(μ‐κ²N,C‐L²Me)]⁺ ( 5 ⁺; HL²=pyrazine) have been prepared as triflate salts by treatment of their neutral precursors [Ru₃(CO)₁₀(μ‐H)(μ‐κ²N,C‐Lⁿ)] with methyl triflate. The cationic character of their heterocyclic ligands is responsible for their enhanced tendency to react with anionic nucleophiles relative to that of hydrido triruthenium carbonyl clusters that have neutral N‐heterocyclic ligands. These clusters react instantaneously with methyl lithium and potassium tris‐sec‐butylborohydride (K‐selectride) to give neutral products that contain novel nonaromatic N‐heterocyclic ligands. The following are the products that have been isolated: [Ru₃(CO)₉(μ‐H)(μ₃‐κ²N,C‐L¹Me₂)] ( 6 ; from 3 ⁺ and methyl lithium), [Ru₃(CO)₉(μ‐H)(μ₃‐κ²N,C‐L¹HMe)] ( 7 ; from 3 ⁺ and K‐selectride), [Ru₃(CO)₉(μ‐H)(μ₃‐κ²N,C‐L²Me₂)] ( 8 ; from 5 ⁺ and methyl lithium), and [Ru₃(CO)₉(μ‐H)(μ₃‐κ²N,C‐L²HMe)] ( 11 ; from 5 ⁺ and K‐selectride). Whereas the reactions of 3 ⁺ lead to products that arise from the attack of the corresponding nucleophile at the C atom of the only CH group adjacent to the N‐methyl group, the reactions of 5 ⁺ give mixtures of two products that arise from the attack of the nucleophile at one of the C atoms located on either side of the N‐methyl group. The LUMOs and the atomic charges of 3 ⁺ and 5 ⁺ confirm that the reactions of these clusters with anionic nucleophiles are orbital‐controlled rather than charge‐controlled processes. The N‐heterocyclic ligands of all of these neutral products are attached to the metal atoms in nonconventional face‐capping modes. Those of compounds 6 – 8 have the atoms of a ligand C?N fragment σ‐bonded to two Ru atoms and π‐bonded to the other Ru atom, whereas the ligand of compound 11 has a C? N fragment attached to a Ru atom through the N atom and to the remaining two Ru atoms through the C atom. A variable‐temperature ¹H NMR spectroscopic study showed that the ligand of compound 7 is involved in a fluxional process at temperatures above ?93 °C, the mechanism of which has been satisfactorily modeled with the help of DFT calculations and involves the interconversion of the two enantiomers of this cluster through a conformational change of the ligand CH₂ group, which moves from one side of the plane of the heterocyclic ligand to the other, and a 180° rotation of the entire organic ligand over a face of the metal triangle.     

Dppm-substituted ruthenium clusters with capping sulfido and selenido ligands derived from thiourea, tetramethylthiourea and elemental selenium

Treatment of [Ru₃(CO)₁₀(μ-dppm)] (4) [dppm = bis(diphenylphosphido)methane] with tetramethylthiourea at 66 °C gave the previously reported dihydrido triruthenium cluster [Ru₃(μ-H)₂(μ₃-S)(CO)₇(μ-dppm)] (5) and the new compounds [Ru₃(μ₃-S)₂(CO)₇(μ-dppm)] (6), [Ru₃(μ₃-S)(CO)₇(μ₃-CO)(μ-dppm)] (7) and [Ru₃(μ₃-S){η¹-C(NMe₂)₂}(CO)₆(μ₃-CO)(μ-dppm)] (8) in 6%, 10%, 32% and 9% yields, respectively. Treatment of 4 with thiourea at the same temperature gave 5 and 7 in 30% and 10% yields, respectively. Compound 7 reacts further with tetramethylthiourea at 66 °C to yield 6 (30%) and a new compound [Ru₃(μ₃-S)₂{η¹-C(NMe₂)₂}(CO)₆(μ-dppm)] (9) (8%). Thermolysis of 8 in refluxing THF yields 7 in 55% yield. The reaction of 4 with selenium at 66 °C yields the new compounds [Ru₃(μ₃-Se)(CO)₇(μ₃-CO)(μ-dppm)] (10) and [Ru₃(μ₃-Se)(μ₃-η³-PhPCH₂PPh(C₆H₄)}(CO)₆(μ-CO)] (11) and the known compounds [Ru₃(μ-H)₂(μ₃-Se)(CO)₇(μ-dppm)] (12) and [Ru₄(μ₃-Se)₄(CO)₁₀(μ-dppm)] (13) in 29%, 5%, 2% and 5% yields, respectively. Treatment of 10 with tetramethylthiourea at 66 °C gives the mixed sulfur-selenium compounds [Ru₃(μ₃-S)(μ₃-Se)(CO)₇(μ-dppm)] (14) and [Ru₃(μ₃-S)(μ₃-Se){η¹-C(NMe₂)₂}(CO)₆(μ-dppm)] (15) in 38% and 10% yields, respectively. The single-crystal XRD structures of 6, 7, 8, 10, 14 and 15 are reported.     

Sequential conversion of ethyne into μ-vinylidene, μ-methylcarbyne and μ-methylcarbene at a di-ruthenium centre: X-ray structures of [Ru2(CO)2(μ-CO) (μ-CCH2) (η-C5H5)2] and [Ru2(CO)2(μ-CO) (μ-CCH3) (η-C5H5)2] [BF4]

The ethyne-derived demetallocycle [Ru₂(CO) (μ-CO){μ-C(O)C₂H₂}(η-C₅H₅)₂ isomerises in boiling toluene to yield the μ-vinylidene complex [Ru₂(CO)₂(μ-CO)(μ-CCH₂) (η-C₅H₅)₂], which on protonation with dry HBF₄ provides the μ-carbyne complex [Ru₂(CO)₂(μ-CO)(μ-CCH₃)(η-C₅H₅)₂][BF₄]; the structure of each product has been determined by X-ray diffraction. The μ-carbyne cation is attacked by hydride to produce the μ-methylcarbene complex [Ru₂(CO)₂(μ-CO)(μ-CHCH₃)(η-C₅H₅)₂].     

Unsymmetrical alkyne binding to a triruthenium centre: Oxidative-addition of diphenyl ditelluride to the furyne cluster [Ru3(CO)7(μ-H)(μ3-η-C4H2O){μ-P(C4H3O)2}(μ-dppm)]

Oxidative-addition of PhTe₂Ph to the furyne cluster [Ru₃(CO)₇(μ-H)(μ₃-η²-C₄H₂O){μ-P(C₄H₃O)₂}(μ-dppm)] (1) results in the isolation of four complexes; (i) the previously reported 54-electron cluster [Ru₃(CO)₆(μ₃-Te)₂(μ-TePh)₂(μ-dppm)] (5) which results from elimination of trifuryl phosphine, (ii) the furenyl cluster [Ru₃(CO)₅(μ-η²-C₄H₃O){μ-P(C₄H₃O)₂}(μ-TePh)₂(μ-dppm)] (6) which results from carbon-hydrogen bond formation and (iii) two new 50-electron complexes [Ru₃(CO)₅(μ-H)(μ₃-η²-C₄H₂O){μ-P(C₄H₃O)₂}(μ-TePh)₂(к²-dppm)] (7) and [Ru₃(CO)₄(μ-H){P(C₄H₃O)₃}(μ₃-η²-C₄H₂O){μ-P(C₄H₃O)₂}(μ-TePh)₂(к²-dppm)] (8) both containing unsymmetrical furyne ligands. The structures of all the new compounds have been unambiguously established by single crystal X-ray crystallography. Further reactivity studies have provided a clear understanding of the relative sequence of the key oxidative-addition and reductive-elimination processes, showing that 6 is an intermediate in the formation of 7. DFT calculations have been used to shed light on the unsymmetrical binding of the furyne ligand in 7 and also to show that the adopted position of the heteroatom within the furyne ring can vary within complexes of this type.     

Magnetic and Spectral Properties of Heterotrinuclear Acetates [Ru2Co(μ3-O)(μ-CH3CO2)6(Py)3]n+ (n = 0 or 1)

The preparation and physical properties of the new heterotrinuclear acetates, [Ru₂CO(μ₃-O)(μ-CH₃CO₂)₆(Py)₃] (Ru₂Co(II)) and [Ru₂Co(μ₃-O)(μ-CH₃CO₂)₆(Py)₃)l₃ (Ru₂Co(III), Py = pyridine), are reported. Three reversible one-electron-redox waves are observed at 1.19, 0.40, and ?1.24 V vs Ag/Ag⁺ electrode for Ru₂Co(lI) in CH₂Cl₂. The complexes of Ru₂Co(II) and Ru₂Co(III) show an intense visible absorption at 570 (? 5950 M^?1 cm^?1) and 551 nm (? 7240 M^?1 cm^?1), respectively. The magnetic susceptibilities of both complexes were also measured from 4.2 to 300 K. The resulting least-squares fit parameters for Ru₂Co(II) areJ_RuCo = ?9 cm^?1, J_RuRu = ?22 cm^?1, g_Co, = g_Ru= 2.19.     

The synthesis and reactivity of some indenyl and bis-indenyl ruthenium carbonyl complexes

The reaction of [Ru₃(CO)₁₂] (1), with indene in refluxing xylene affords [{(η⁵-C₉H₇)Ru(CO)₂}₂] (2), in high yield. An analogous reaction of 1 with 2-phenylindene affords the expected dinuclear complex [{(η⁵-C₉H₆Ph)Ru(CO)₂}₂] (5), and a heptaruthenium cluster [(C₉H₄Ph)Ru₇(μ-H)(μ-CO)₂(CO)₁₆] (6). The indenyl ligand in compound 6 exhibits a novel bonding mode in which the benzenoid ring is μ₄,η¹:η¹:η²:η² bound to the cluster. Refluxing 1 with bis-indenyl methane affords the dinuclear complex [Ru₂(CO)₄{μ-(η⁵-C₉H₆)₂CH₂}] (7), which reacts with iodine via Ru-Ru bond cleavage to give [Ru₂I₂(CO)₄{(η⁵-C₉H₆)₂CH₂}] (8).     

Novel dinuclear and trinuclear ruthenium clusters derived from 2‐aryl‐substituted indenylphosphines via C─H bond cleavage

Treatment of Ru₃(CO)₁₂ with an equivalent of (2‐phenyl‐1H ‐inden‐3‐yl)dicyclohexylphosphine ( 1 ) and (2‐pyridyl‐1H ‐inden‐1‐yl)dicyclohexylphosphine ( 4 ) in refluxing heptane gave the novel trinuclear ruthenium clusters (μ₃‐η¹:η²:η⁵–2‐phenyl‐3‐Cy₂PC₉H₄)Ru₃(CO)₈ ( 1c ) and [μ₂‐η¹–2‐(pyridin‐2‐yl)‐3‐Cy₂PC₉H₆]Ru₃(CO)₉ ( 4a ), respectively, via C ─ H bond cleavage. (2‐Mesityl‐1H ‐inden‐3‐yl)dicyclohexylphosphine ( 2 ) reacted with Ru₃(CO)₁₂ in refluxing heptane to give the trinuclear ruthenium cluster [μ‐2‐mesityl‐(3‐Cy₂PC₉H₅)](μ₂‐CO)Ru₃(CO)₉ ( 2c ) via C ─ H bond cleavage and carbonyl insertion. 2‐(Anthracen‐9‐yl)‐1H –inden‐3‐yldicyclohexylphosphine ( 3 ) reacted with Ru₃(CO)₁₂ in refluxing heptane to give the dinuclear ruthenium cluster [μ₂‐η³:η³–2‐(anthracen‐9‐yl)‐3‐Cy₂PC₉H₆]Ru₂(CO)₅ ( 3a ). The structures of 1c , 2c , 3a and 4a were fully characterized using IR and NMR spectroscopy, elemental analysis and single‐crystal X‐ray diffraction. These results suggest that the 2‐aryl substituent on the indenyl ring has a pronounced effect on the reaction and coordination modes of Ru₃(CO)₁₂.     

Darstellung carboxylatsubstituierter Rhenium-Gold-Metallatetrahedrane Re2(AuPPh3)2(μ-PCy2)(CO)7(η1-OC(R)O) (R = H,Me, CF3, Ph, 3,4-(OMe)2C6H3)

Synthesis of Carboxylate Substituted Rhenium Gold Metallatetrahedranes Re₂(AuPPh₃)₂(μ-PCy₂)(CO)₇(η¹-OC(R)O) (R = H, Me, CF₃, Ph, 3,4-(OMe)₂C₆H₃) The reaction of the in situ prepared salt Li[Re₂(μ-H)(μ-PCy₂)(CO)₇(ax-C(Ph)O)] ( 2 ) with 1,5 equivalents of monocarboxylic acid RCOOH (R = H ( 4 a ), Me ( 4 b ), CF₃ ( 4 c ), Ph ( 4 d ), 3,4-(OMe)₂C₆H₃ ( 4 e ) in tetrahydrofruan (THF) solution at 60 °C gives within 4 h under release of benzaldehyde (PhCHO) the η¹-carboxylate substituted dirhenium salt Li[Re₂(μ-H)(μ-PCy₂)(CO)₇(η¹-OC(R)O)] (R = H ( 4 a ), Me ( 4 b ), CF₃ ( 4 c ), Ph ( 4 d ), 3,4-(OMe)₂C₆H₃ ( 4 e )) in almost quantitative yield. The lower the pK_a value of the respective carboxylic acid the faster the reaction proceeds. It was only in the case of CF₃COOH possible to prove the formation of the hydroxycarbene complex Re₂(μ-H)(μ-PCy₂)(CO)₇(=C(Ph)OH) ( 5 ) prior to elimination of PhCHO. The new compounds 4 a–4 e were only characterized by ³¹P NMR and ν(CO) IR spectroscopy as they are only stable in solution. They are converted with two equivalents of BF₄AuPPh₃ at 0 °C in a so-called cluster expansion reaction into the heterometallic metallatetrahedrane complexes Re₂(AuPPh₃)₂(μ-PCy₂)(CO)₇(η¹-OC(R)O) (R = H ( 7 a ), Me ( 7 b ), CF₃ ( 7 c ), Ph ( 7 d ), 3,4-(OMe)₂C₆H₃ ( 7 e )) (yield 47–71% ). The expected precursor complexes of 7 a–7 e Li[Re₂(AuPPh₃)(μ-PCy₂)(CO)₇(η¹-OC(R)O] ( 8 ) were not detected by NMR and IR spectroscopy in the course of the reaction. Their existence was retrosynthetically proved by the reaction of 7 b with an excess of the chelating base TBD (1,5,7-Triazabicyclo[4.4.0]dec-5-en) forming [(TBD)_xAuPPh₃][Re₂(AuPPh₃)(μ-PCy₂)(CO)₇(η¹-OC(Me)O] ( 8 b ) in solution. The η¹-bound carboxylate ligand in 7 a–7 e can photochemically be converted into a μ-bound ligand in Re₂(AuPPh₃)₂(μ-PCy₂)(μ-OC(R)O)(CO)₆ (R = H ( 9 a ), Me ( 9 b ), CF₃ ( 9 c ), Ph ( 9 d ), 3.4-(MeO)₂C₆H₃ ( 9 e )) under release of one equivalent CO. All isolated cluster complexes were characterized and identified by the following analytical methods: elementary analysis, NMR (¹H, ³¹P) spectroscopy, ν(CO) IR spectroscopy and in the case of 7 d and 9 b by X-ray structure analysis.     

Synthesis and Structure of a Novel Cluster with Trigonal-bipyramidal Ge_2Ru_3 Core

ＩｎｔｒｏｄｕｃｔｉｏｎＷｅｒｅｃｅｎｔｌｙｒｅｐｏｒｔｅｄａｎｉｎｔｒａｍｏｌｅｃｕｌａｒｔｈｅｒｍａｌｒｅａｒ ｒａｎｇｅｍｅｎｔｂｅｔｗｅｅｎＳｉ—ＳｉａｎｄＦｅ—Ｆｅｂｏｎｄｓｉｎｔｈｅｄｉｎｕ ｃｌｅａｒｉｒｏｎｃｏｍｐｌｅｘ { (Ｍｅ2 ＳｉＳｉＭｅ2 ) [(η5 Ｃ5Ｈ4 )Ｆｅ(ＣＯ) ]2 (μ ＣＯ) 2 } (Ｓｃｈｅｍｅ 1) .1 5Ｔｈｅｔｈｅｒｍａｌｒｅａｒｒａｎｇｅｍｅｎｔｗａｓｌａｔｅｒｅｘｔｅｎｄｅｄｔｏｇｅｒｍａｎｉｕｍ ｉｒｏｎａｎｄｓｉｌｉｃｏｎ ｒｕｔｈｅｎｉ ｕｍａｎａｌｏｇｕｅｓ .6 8Ｔｈ…     

Syntheses and Reactions of Dimolybdenum Alkyne Compounds Containing Functionally Substituted Ligands. The Crystal Structure of [Co2Mo2(μ4-CHCH)(μ-CO)4(CO)4-(η5-C5H4C(O)Me)2]

Abstract

Three dimolybdenum alkyne complexes containing functionally substituted ligands [Mo₂(μ-CHCH)(CO)₄(η⁵?C₅H₄C(O)R)₂] [R ? OEt, (1a); R ? Me, (1b); R ? Ph, (1c)] were synthesized by reactions of acetylene with in situ generated metal-metal triply bonded complexes [Mo(CO)₂(η⁵?C₅H₄C(O)R)]₂ (R ? OEt, Me, Ph). Further reaction of (1a), (1b) or (1c) with Co₂(CO)₈ in refluxing toluene gave another three new butterfly compounds [Co₂Mo₂-(μ₄-CHCH)(μ-CO)₄(CO)₄(η⁵-C₅H₄C(O)R)₂] [R ? OEt, (2a); R ? Me, (2b); R ? Ph, (2c)]. The resulting compounds were characterized by elemental analyses, IR, ¹H NMR and MS. The crystal structure of (2b) was determined by single-crystal X-ray analysis. The results indicate that the existence of functional groups on the cyclopentadienyl ring has an influence on the reactivity of this type of complex.     

Gold-ruthenium compounds containing bridging phosphide or thiolate groups: Crystal structures of the intermediate species [Ru3(CO)8L(μ3-η,η,η-{Me3SiCC(C2Fc)SC(Fc)CSCCSiMe3})] (L = NMe3 or PPh2H)

New tetranuclear complexes have been prepared using bridging phosphide or thiolate groups between phosphine gold fragments and the compound [Ru₃(CO)₉(μ₃-η²,η⁴,η³-{Me₃SiCC(C₂Fc)SC(Fc)CSCCSiMe₃})]. The crystal structures of the intermediates [Ru₃(CO)₈(NMe₃)(μ₃-η²,η⁴,η³-{Me₃SiCC(C₂Fc)SC(Fc)CSCCSiMe₃})] and [Ru₃(CO)₈(PPh₂H)(μ₃-η²,η⁴,η³-{Me₃SiCC(C₂Fc)SC(Fc)CSCCSiMe₃})] have been solved.     

Intramolecular Cyclization of Butadiyne Functionalized Ligands coordinated to Triosmium‐Carbonyl Cluster

Reactions between diynes and [Os₃(CO)₁₁(CH₃CN)] in the presence of water give rise to the formation of intriguing hydride triosmium clusters [Os₃(μ‐H)(CO)₉{μ₃,η¹:η³:η¹‐RC₂COHC≡CR}] ( 1a – 1c ) under mild conditions in high yields. When these allylic alcohol compounds 1a – 1c are dissolved in dry polar and donor solvents, an intramolecular cyclization process takes place to give [Os₃(μ‐H)(CO)₉{μ₃,η¹:η³:η¹‐RC₂CH=COCR}] ( 2a – 2c ) in quantitative yield. The utilization of [Os₃(CO)₁₁(CH₃CN)] as starting material together with the addition of water can replace the inconvenient use of [Os₃(μ‐H)₂(CO)₁₀]. This method of synthesis provides a facile pathway for diyne cyclizations and has a clear advantage over those described to date in the literature. Additionally, the analogous cyclized mixed‐metal complex [Os₃(μ‐H)(CO)₉{μ₃,η¹:η³:η¹‐FcC₂CH=COCFc}] ( 2d ) (Fc = ferrocenyl), was synthesized in order to carry out a comparative electrochemical study with the related compounds [Os₃(CO)₁₁(μ₃‐FcC₄Fc)] ( I ) and [Os₃(CO)₁₀(μ₃‐FcC₄Fc)] ( II ), which were previously reported by R. D. Adams.     

Co-ordinatively unsaturated metal cluster compounds: Facile reactivity of the phosphinidene-capped phosphido-bridged triruthenium cluster [Ru3(μ3-PPh)(μ2-PPh2)2(CO)7]

The purple, phosphinidene-capped, phosphido-bridged triruthenium cluster [Ru₃(μ₃-PPh)(μ₂-PPh₂)₂(CO)₇] reacts readily with carbon monoxide, trimethylphosphite, sodium borohydride and diphenylacetylene under mild conditions to afford product mixtures from which [Ru₃(μ-PPh)(μ₂-PPh₂)₂(CO)_7+n] (n = 1, 2 or 3), [Ru₃(μ₃-PPh)(μ₂-PPh₂)₂(CO)₆{P(OMe)₃}], [Ru₃(μ₃-η³-PhPCPhCPh)(μ₂-PPh₂)₂(CO)₆], respectively, can be isolated. The structure of [Ru₃(μ₃-PPh)(μ₂-PPh₂)₂(CO)₆{P(OMe)₃}] has been established X-ray crystallographically.