Synthesis and characterization of organic–inorganic hybrid block copolymers containing a fully condensed ladder‐like polyphenylsilsesquioxane

A series of inorganic–organic hybrid block copolymers were synthesized via atom transfer radical polymerization using a fully condensed, ladder‐like structured polyphenylsilsesquioxane end‐functionalized macroinitiator. The inorganic portion, ladder‐like polyphenylsilsesquioxane, was synthesized in a one‐batch, base‐catalyzed system, whereas organic hard and soft monomers, styrene, and n‐butyl acrylate, were polymerized and copolymerized on the ends of the linear, inorganic backbone. Synthesized hybrid diblock, triblock, and random copolymers were characterized by ¹H NMR, ²⁹Si NMR, gel permeation chromatography, static light scattering, Fourier transform infrared spectroscopy, thermogravimetric analysis, and differential scanning calorimetry. Hybrid block copolymers were well‐defined with low polydispersity (<1.4) and exhibited enhanced thermal properties in the form of increased glass transition and degradation onset temperatures over their organic analogues.© 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Bis(4‐methylbenzylammonium) tetrachloridozincate: a new noncentrosymmetric structure characterized by 13C CP–MAS NMR spectroscopy

A new noncentrosymmetric organic–inorganic hybrid material, (C₈H₁₂N)₂[ZnCl₄], has been synthesized as single crystals at room temperature and characterized by X‐ray diffraction and solid‐state NMR spectroscopy. Its novel structure consists of two 4‐methylbenzylammonium cations and one [ZnCl₄]²⁻ anion connected by N—H...Cl and C—H...Cl hydrogen bonds, two of which are three‐centre interactions. The Zn^II metal centre has a slightly distorted tetrahedral coordination geometry. Results from ¹³C CP–MAS NMR spectroscopy are in good agreement with the X‐ray structure. Density functional theory calculations allow the assignment of the carbon peaks to the independent crystallographic sites.     

Solid polymer electrolytes. VI. Microstructure of organic–inorganic hybrid networks composed of 3‐glycidoxypropyltrimethoxysilane and LiClO4 and affected by different synthetic routes

Hybrid organic–inorganic materials derived from 3‐glycidoxypropyltrimethoxylsilane were prepared via two different synthetic routes: (1) the HCl‐catalyzed sol–gel approach of silane followed by the lithium perchlorate (LiClO₄)/HCl‐catalyzed opening of epoxide and (2) the simultaneous gelation of tin/LiClO₄‐catalyzed silane/epoxide groups. LiClO₄ catalyzed the epoxide polymerization, and its effects on the structures of these hybrid materials were studied by NMR. The structure of the inorganic side was probed by solid‐state ²⁹Si NMR spectroscopy, and the characterizations of the organic side and the chemical processes involved in the different synthetic routes were performed with solid‐state cross‐polarity/magic‐angle‐spinning ¹³C NMR. The different synthetic routes significantly affected the polymerization behaviors of the organic and inorganic sides in the presence of LiClO₄. A larger amount of LiClO₄ promoted the opening of epoxide and led to the formation of longer poly(ethylene oxide) chains via the HCl‐catalyzed sol–gel approach, whereas in the case of the tin‐catalyzed approach, the faster polymerization of the inorganic side hindered the growth of the organic network. The addition of LiClO₄ was proven to be without crystalline salt present in the hybrid networks by wide‐angle X‐ray powder diffraction. Also, the interactions between the ions and hybrid host, examined with Fourier transform infrared and ⁷Li proton‐decoupled magic‐angle‐spinning NMR, further demonstrated that extensive ion aggregation existed in these hybrid materials. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 151–161, 2004     

An expedient ‘click’ approach for the synthetic evaluation of ester‐triazole‐tethered organosilica conjugates

The present work articulates the synthesis of a new series of organo‐functionalized triethoxysilanes derived from versatile carboxylic acids and 3‐azidopropyltriethoxysilane in excellent yields. A proficient and convenient route implicating the Cu(I)‐catalysed 1,3‐cycloaddition of organic azide with terminal alkynes, labelled as click silylation, has been developed for the generation of ester‐triazole‐linked alkoxysilanyl scaffolds ( 4a – f ). All the synthesized compounds have been thoroughly characterized using elemental analysis and Fourier transform infrared, ¹H NMR and ¹³C NMR spectroscopic techniques. Importantly, the fabricated alkoxysilanes are potentially amenable for an in situ sol–gel condensation reaction with silica nanospheres leading to the incorporation of organic functionality via covalent grafting onto the nanostructured particle system. As a proof of concept, a one‐pot preparation of organic–inorganic hybrid nanoparticles is presented using bis‐silane 4 f . The efficiency and selectivity of the prepared nanocomposite towards metal ions is highlighted using adsorption experiments, and the immobilized nanoparticles present a high sensing efficiency towards Cu²⁺ and Pb²⁺ ions while demonstrating better response than that of the bulk material.     

A 3D Aluminoborate Open Framework Interpenetrated by 2D Zinc–Amine Coordination‐Polymer Networks in Its 11‐Ring Channels

A new inorganic–organic hybrid solid, [Zn(dap)₂][AlB₅O₁₀], combining the structural features of 3D open‐framework inorganic solids and 2D metal–organic coordination polymers has been synthesized under solvothermal conditions. The compound displays extensive luminescence and moderate second‐harmonic‐generation efficiency.     

Preparation,characterization, and properties of novolac‐type phenolic/SiO2 hybrid organic–inorganic nanocomposite materials by sol–gel method

This article describes the preparation of novolac‐type phenolic resin/silica hybrid organic–inorganic nanocomposite, with a sol–gel process. The coupling agent was used to improve the interface between the organic and inorganic phases. The effect of the structure of the nanocomposite on its physical and chemical properties is discussed. The coupling agent reacts with the resin to form covalent bonds. The structure of the modified hybrid nanocomposites was identified with a Fourier transform infrared spectroscope. The silica network was characterized by nuclear magnetic resonance imaging (²⁹Si NMR). Results revealed that Q₄ (tetrasubstituted) and T₃ (trisubstituted) are the dominant microstructures. The size of the silica in the phenolic resin was characterized with a scanning electron microscope. The size of the particles of inorganic silica in the modified system was less than 100 nm. The nanocomposite exhibited good transparency. Moreover, the thermal and mechanical properties exhibited significant improvement. The modified hybrid composite exhibited favorable thermal properties. The temperature at which a weight loss of 5% occurred increased from 281 to 350 °C. The flexural strength increased by 6–30%. The limiting oxygen index of the nanocomposite reached 37, and the Underwriters Laboratory test was 94V‐0. Consequently, these materials possess excellent flame‐retardant properties. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 905–913, 2003     

A Novel Thin‐Film Copper Array Based on an Organic/Inorganic Sensor Hybrid: Microfabrication,Potentiometric Characterization,and Flow‐Injection Analysis Application

A first step towards the microfabrication of a thin‐film array based on an organic/inorganic sensor hybrid has been realized. The inorganic microsensor part incorporates a sensor membrane based on a chalcogenide glass material (Cu‐Ag‐As‐Se) prepared by pulsed laser deposition technique (PLD) combined with an PVC organic membrane‐based organic microsensor part that includes an o‐xylyene bis(N,N‐diisobutyl‐dithiocarbamate) ionophore. Both types of materials have been electrochemically evaluated as sensing materials for copper(II) ions. The integrated hybrid sensor array based on these sensing materials provides a linear Nernstian response covering the range 1×10^?6–1×10^?1 mol L^?1 of copper(II) ion concentration with a fast, reliable and reproducible response. The merit offered by the new type of thin‐film hybrid array includes the high selectivity feature of the organic membrane‐based thin‐film microsensor part in addition to the high stability of the inorganic thin‐film microsensor part. Moreover, the thin‐film sensor hybrid has been successfully applied in flow‐injection analysis (FIA) for the determination of copper(II) ions using a miniaturized home‐made flow‐through cell. Realization of the organic/inorganic thin‐film sensor hybrid array facilitates the development of a promising sophisticated electronic tongue for recognition and classification of various liquid media.     

Novel organic–inorganic hybrid materials from renewable resources: Hydrosilylation of fatty acid derivatives

Novel hybrid organic–inorganic materials were prepared from 10‐undecenoyl triglyceride and methyl 3,4,5‐tris(10‐undecenoyloxy)benzoate via hydrosilylation. 1,4‐Bis(dimethylsilyl)benzene, tetrakis(dimethylsilyloxy)silane, and 2,4,6,8‐tetramethylcyclotetrasiloxane were used as crosslinkers. The hydrosilylation reaction was catalyzed by Karstedt's catalyst [Pt(0)–divinyltetramethyldisiloxane complex]. The networks were structurally characterized by Fourier transform infrared spectroscopy, ¹³C NMR, and ²⁹Si magic‐angle‐spinning NMR. The thermal properties of these hybrids were studied with differential scanning calorimetry, thermogravimetric analysis, and dynamic mechanical analysis. The obtained materials showed good transparency and promising properties for optical applications. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 6295–6307, 2005     

Preparation of stable second‐order nonlinear optical films by sol–gel technique

A stable nonlinear optical (NLO) film containing “T” type alkoxysilane dye was prepared by sol–gel technology. This crosslinked “T” type alkoxysilane dye was synthesized and fully characterized by FTIR, UV–Vis spectra, and ¹H‐NMR. Followed by hydrolysis and copolymerization processes of the alkoxysilane with γ‐glycidoxypropyl trimethoxysilane (KH560) and tetraethoxysilane (TEOS), high quality inorganic–organic hybrid second‐order NLO films were obtained by spin coating. The “T” type structure of the alkoxysilane was found to be effective for improving the temporal stability of the optical nonlinearity due to the reduction in the relaxation of the chromophore in the film materials. Copyright © 2009 John Wiley & Sons, Ltd.     

A two‐dimensional organic–inorganic hybrid perovskite‐type semiconductor: poly[(2‐azaniumylethyl)trimethylphosphanium [tetra‐μ‐bromido‐plumbate(II)]]

Recently, with the prevalence of `perovskite fever', organic–inorganic hybrid perovskites (OHPs) have attracted intense attention due to their remarkable structural variability and highly tunable properties. In particular, the optical and electrical properties of organic–inorganic hybrid lead halides are typical of the OHP family. Besides, although three‐dimensional hybrid perovskites, such as [CH₃NH₃]PbX₃ (X = Cl, Br or I), have been reported, the development of new organic–inorganic hybrid semiconductors is still an area in urgent need of exploration. Here, an organic–inorganic hybrid lead halide perovskite is reported, namely poly[(2‐azaniumylethyl)trimethylphosphanium [tetra‐μ‐bromido‐plumbate(II)]], {(C₅H₁₆NP)[PbBr₄]}_n, in which an organic cation is embedded in inorganic two‐dimensional (2D) mesh layers to produce a sandwich structure. This unique sandwich 2D hybrid perovskite material shows an indirect band gap of ～2.700 eV. The properties of this compound as a semiconductor are demonstrated by a series of optical characterizations and indicate potential applications for optical devices.     

Design and synthesis of "dumb-bell" and "triangular" inorganic-organic hybrid nanopolyoxometalate clusters and their characterisation through ESI-MS analyses

A series of tris(hydroxymethyl)aminomethane (TRIS)‐based linear (bis(TRIS)) and triangular (tris(TRIS)) ligands has been synthesised and were covalently attached to the Wells–Dawson type cluster [P₂V₃W₁₅O₆₂]^9? to generate a series of nanometer‐sized inorganic–organic hybrid polyoxometalate clusters. These huge hybrids, with a molecular mass similar to that of small proteins in the range of ≈10–16 kDa, were unambiguously characterised by using high‐resolution ESI‐MS. The ESI‐MS spectra of these compounds revealed, in negative ion mode, a characteristic pattern showing distinct groups of peaks corresponding to different anionic charge states ranging from 3^? to 8^? for the hybrids. Each peak in these individual groups could be unambiguously assigned to the corresponding hybrid cluster anion with varying combinations of tetrabutylammonium (TBA) and other cations. This study therefore highlights the prowess of the high‐resolution ESI‐MS for the unambiguous characterisation of large, nanoscale, inorganic–organic hybrid clusters that have huge mass, of the order of 10–16 kDa. Also, the designed synthesis of these compounds points to the fact that we were able to achieve a great deal of structural pre‐design in the synthesis of these inorganic–organic hybrid polyoxometalates (POMs) by means of a ligand design route, which is often not possible in traditional “one‐pot” POM synthesis.     

Metal‐Directed Self‐Assembly of a Polyoxometalate‐Based Molecular Triangle: Using Powerful Analytical Tools to Probe the Chemical Structure of Complex Supramolecular Assemblies

A polyoxometalate‐based molecular triangle has been synthesized through the metal‐driven self‐assembly of covalent organic/inorganic hybrid oxo‐clusters with remote pyridyl binding sites. The new metallomacrocycle was unambiguously characterized by using a combination of ¹H NMR spectroscopy, 2D diffusion NMR spectroscopy (DOSY), electrospray ionization travelling wave ion mobility mass spectrometry (ESI‐TWIM‐MS), small‐angle X‐ray scattering (SAXS) and molecular modelling. The collision cross‐sections obtained from TWIM‐MS and the hydrodynamic radii derived from DOSY are in good agreement with the geometry‐optimized structures obtained by using theoretical calculations. Furthermore, SAXS was successfully employed and proved to be a powerful technique for characterizing such large supramolecular assemblies.     

An Organic‐Inorganic Hybrid Based on Keggin‐Type Polyoxometalate and Hypoxanthine: Synthesis,Structure, Stability,and Electrochemistry Properties

The organic‐inorganic hybrid H₅[Ag₂(hyp)₂]₂[BW₁₂O₄₀] · 9H₂O ( 1 ) (hpy = hypoxanthine), based on Keggin‐type polyoxometalate and hypoxanthine, was prepared by hydrothermal synthesis and characterized by single‐crystal and powder X‐ray diffraction, IR spectroscopy, elemental analysis, and thermogravimetry. The title compound has a two‐dimensional layer structure constructed by Keggin‐type [BW₁₂O₄₀]^5– anion, silver, and the biomolecule hyp. In addition, compound 1 exhibited excellent stability and superior activity in the electro‐catalytic oxidation of glucose.     

Sulfonic and Phosphonic Acid and Bifunctional Organic–Inorganic Hybrid Membranes and Their Proton Conduction Properties

Hybrid organic–inorganic approaches are used for the synthesis of bifunctional proton exchange membrane fuel cell (PEMFC) membranes owing to their ability to combine the properties of a functionalized inorganic network and an organic thermostable polymer. We report the synthesis of both sulfonic and phosphonic acid functionalized mesostructured silica networks into a poly(vinylidenefluoride‐co‐hexafluoropropylene) (poly(VDF‐co‐HFP) copolymer. These membranes, containing different amounts of phosphonic acid and sulfonic acid groups, have been characterized using FTIR and NMR spectroscopy, SA‐XRD, SAXS, and electrochemical techniques. The proton conductivity of the bifunctional hybrid membranes depends strongly on hydration, increasing by two orders of magnitude over the relative humidity (RH) range of 20 to 100 %, up to a maximum of 0.031 S cm⁻¹ at 60 °C and 100 % RH. This value is interesting as only half of the membrane conducts protons. This approach allows the synthesis of a porous SiO₂ network with two different functions, having  SO₃H and  PO₃H₂ embedded in a thermostable polymer matrix.     

Design of In Vitro Bioactive Hybrid Materials from the First Generation of Amine Dendrimers as Nanobuilding Blocks

In this work, the first generation of poly(propyleneimine) dendrimers were functionalized with alkoxysilane terminal groups and subjected to one of two different sol–gel process that followed two different catalytic pathways, that is base‐ or acid‐catalyzed pathways. Thus, two series of new organic–inorganic hybrid materials were obtained in the form of monolithic pieces with differences in terms of both morphology and silanol content, which originated from the different sol–gel pathway that was followed. Moreover, calcium ions were added into the hybrid composition to promote in vitro bioactivity and phosphorous sources were used during the sol–gel step to obtain an earlier bioactive response. Characterization of these organic–inorganic hybrid materials was performed by means of thermogravimetric and elemental analyses, Fourier transform infrared spectroscopy (FTIR), solid state ¹³C, ²⁹Si and ³¹P magic‐angle spinning (MAS) nuclear magnetic resonance (NMR) spectroscopy, N₂‐adsorption isotherms, mercury‐intrusion porosimetry, and ζ‐potential measurements. The in vitro bioactivity of the dendritic hybrid networks was evaluated by soaking the materials in simulated body fluid and the results were explained in terms of the composition of the hybrids and the sol–gel route that was followed to prepare them.     

Organic–inorganic hybrid networks by the sol–gel process and subsequent photopolymerization

Organic–inorganic hybrid materials were prepared by a convenient two‐step curing procedure based on sol–gel condensation and subsequent photopolymerization. Novel bismethacrylate‐based hybrid monomers with pendant, condensable alkoxysilane groups were prepared by Michael addition and possessed number‐average molecular weights between 580 and 1600 g/mol. The formation of inorganic networks by sol–gel condensation of the alkoxysilane groups in the presence of aqueous methacrylic acid was monitored with rheological measurements. The condensation conversion was monitored with solid‐state ²⁹Si cross‐polarization/magic‐angle spinning NMR spectroscopy. Subsequent photopolymerization led to organic–inorganic hybrid networks and low volume shrinkage, ranging from 4.2 to 8.3%, depending on the molecular weight of the hybrid monomer applied. Highly filled composite materials with glass filler fractions greater than 75% showed attractive mechanical properties with Young's moduli of 2700–6200 MPa. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 4274–4282, 2001     

Synthesis,Structural Characterization,and Thermoresponsivity of Hybrid Supramolecular Dendrimers Bearing a Polyoxometalate Core

A series of cationic dendrons bearing triethylene glycol monomethyl ether terminal groups of different generations have been synthesized and used to encapsulate an inorganic polyanionic cluster [K_12.5Na_1.5(NaP₅W₃₀O₁₁₀)] through electrostatic interactions. The resulting dendritic cation–encapsulated polyoxometalate (POM) complexes, cluster–dendrimers, are soluble in water and exhibit lower critical solution temperatures (LCST). The thermoresponsivities of these complexes in aqueous solutions were studied by turbidimetry and variable‐temperature ¹H NMR spectroscopy. The observed cloud points show a remarkable dependence on the generation of the dendrons. Complexes composed of first‐generation dendrons exhibit no obvious thermoresponsive properties, but for complexes bearing second‐generation dendrons, the LCST decreases as the number of dendritic cations around the POM cluster increases. Complexes composed of third‐generation cations underwent reversible aggregation and disaggregation upon heating and cooling, respectively. This thermally induced self‐aggregation was characterized by DLS and TEM. In addition, the effects of salt and solvent on the LCST were investigated. This research demonstrates a new type of thermoresponsive dendritic organic–inorganic hybrid complex and provides a general route to the endowment of POMs with temperature‐sensitive properties through electrostatic interactions.     

Modification and intercalation of layered zirconium phosphates: a solid‐state NMR monitoring

Several layered zirconium phosphates treated with Zr(IV) ions, modified by monomethoxy‐polyethyleneglycol‐monophosphate and intercalated with doxorubicin hydrochloride have been studied by solid‐state MAS NMR techniques. The organic components of the phosphates have been characterized by the ¹³C{¹H} CP MAS NMR spectra compared with those of initial compounds. The multinuclear NMR monitoring has provided to establish structure and covalent attachment of organic/inorganic moieties to the surface and interlayer spaces of the phosphates. The MAS NMR experiments including kinetics of proton‐phosphorus cross polarization have resulted in an unusual structure of zirconium phosphate 6 combining decoration of the phosphate surface by polymer units and their partial intercalation into the interlayer space. Copyright © 2016 John Wiley & Sons, Ltd.     

Synthesis,characterization, and proton‐conducting properties of organic–inorganic hybrid membranes based on polysiloxane zwitterionomer

The synthesis and characterization of a series of zwitterionic hybrid membranes based on a zwitterionic siloxane precursor (ZS) are described. Flexible, transparent, optically homogeneous films were prepared. With the further incorporation of poly(ethylene glycol) (PEG), the hybrid films became more flexible but translucent. The structure of the inorganic sides was probed with solid‐state ²⁹Si NMR spectroscopy, and the organic sides and the chemical process involved were characterized with solid‐state ¹³C cross‐polarization/magic‐angle spinning NMR. A higher content of ZS led to higher proton conductivity of the hybrid electrolytes. Moreover, the proton conductivity was enhanced by the addition of the plasticizing component of PEG to the hybrid matrix; this was ascribed to the increased water uptake and free volume of the hybrid matrix and the dissociation of sulfonic acid groups. The proton conductivity of these hybrid membranes could be increased up to 3.5 × 10^?2 S/cm by the temperature and relative humidity being increased to 85 °C and 95%, respectively. The proton‐conduction behavior of these hybrid membranes is also briefly discussed. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3444–3453, 2006     

(CH3NH3)2PdCl4: A Compound with Two‐Dimensional Organic–Inorganic Layered Perovskite Structure

The synthesis of previously unknown perovskite (CH₃NH₃)₂PdCl₄ is reported. Despite using an organic cation with the smallest possible alkyl group, a 2D organic–inorganic layered Pd‐based perovskites was still formed. This demonstrates that Pd‐based 2D perovskites can be obtained even if the size of the organic cation is below the size limit predicted by the Goldschmidt tolerance‐factor formula. The (CH₃NH₃)₂PdCl₄ phase has a bulk resistivity of 1.4 Ω cm, a direct optical gap of 2.22 eV, and an absorption coefficient on the order of 10⁴ cm^?1. XRD measurements suggest that the compound is moderately stable in air, an important advantage over several existing organic–inorganic perovskites that are prone to phase degradation problems when exposed to the atmosphere. Given the recent interest in organic–inorganic perovskites, the synthesis of this new Pd‐based organic–inorganic perovskite may be helpful in the preparation and understanding of other organic–inorganic perovskites.