A chromatography-mass spectrometry study of aquatic chlorination of UV-filter avobenzone

We studied the reactions of 4-tert-butyl-4′-methoxydibenzoylmethane (avobenzone), the most common UV filter in formulations of sunscreens, under the conditions of disinfection. Three chlorinated compounds were identified as the main products. Their structures were confirmed by high-performance liquid chromatography-tandem mass spectrometry (HPLC–MS²) with accurate mass measurements and by gas chromatography–mass spectrometry (GC/MS). It was reliably proved, that the substitution involved the double bond of the enolic form of the diketone, rather than the activated aromatic ring, leading to the formation of 2-chloro-1-(4-tert-butylphenyl)-3-(4-methoxyphenyl)-1,3-propanedione and 2,2-dichloro-1-(4-tert-butylphenyl)-3-(4-methoxyphenyl)-1,3-propanedione as the main products. The third identified product was 2-chloro-1-(4-methoxyphenyl)ethanone.     

(Perhalogenmethylthio)heterocyclen. XXI. Reaktionen halogenierter perhalogenmethylthiopyrrole: Salz- und radikalbildung,dimerisierung

2-Chloro-3,4,5-tris(trifluoromethylthio)pyrrole ( 2a ), 3-Chloro-2,4,5-tris(trifluoromethylthio)pyarrole ( 2b ) and 3,4-dichloro-2,5-bis(trifluromoethylthio)pyrrole ( 2c ) react with silver nitrate/silver acetate in good yield to give the corresponding N-silver salts 3a-c . Compound 2b forms with an aqueous potassium hydroxide solution the N-potassium salt 4 . Compounds 3a and 3b react with iodine to give the dimeers 2,2′-dichloro-3,3,′ 4,4′5,5′-hexakis(trifluoromethylthio)-2,2′-bi-2H-pyrrolyl ( 5a ) and 3,3′-dichloro-2,2′,4,4′,5,5′-hexakis(trifluoromethylthio)-2,2′-bi-2H-pyrrolyl ( 5b ). The dimers dissociate in solution to the corresponding pyrrolayl radicals. The esr and endor spectra of 3-chloro-2,4,5-tris(trifluoromethylthio)pyrrolyl were measured; coupling constants are given. For the newly prepared substances melting-points, ¹⁹F-nmr and ir spectroscopical data are provided.     

Synthesis of new imidazo[2,1-<Emphasis Type="Italic">b</Emphasis>][1,3]thiazole derivatives from 2-amino-4-(2,2-dichlorovinyl)-1,3-thiazole and <Emphasis Type="Italic">N</Emphasis>-(2,2-dichloro-2-phenylethylidene)arenesulfonamides

2-Amino-4-(2,2-dichlorovinyl)-1,3-thiazole reacted with highly electrophilic N-(2,2-dichloro-2-phenylethylidene)- and N-(2,2,2-trichloroethylidene)arenesulfonamides through the exocyclic amino group to give products of nucleophilic addition to the azomethine bond, N-[2,2-di(or 2,2,2-tri)chloro-1-(1,3-thiazol-2-ylamino)ethyl]arenesulfonamides in good yields. Intramolecular heterocyclization of the latter afforded N-[3-(2,2-dichloroethyl)-6-phenylimidazo[2,1-b][1,3]thiazol-5-yl]arenesulfonamides.     

Transformations of 5-chloro-2-hydrazino-4-<Emphasis Type="Italic">p</Emphasis>-tolylsulfonyl-1,3-thiazole

Accessible 2,2-dichloro-1-p-tolylsulfonylethenyl isothiocyanate reacted with hydrazine hydrate to give 5-chloro-2-hydrazino-4-p-tolylsulfonyl-1,3-thiazole whose reactions with thiols and amines followed a complicated pattern. Treatment of 5-chloro-2-hydrazino-4-p-tolylsulfonyl-1,3-thiazole with acetylacetone led to the formation of previously unknown 5-chloro-2-(3,5-dimethyl-1H-pyrazol-1-yl)-4-p-tolylsulfonyl-1,3-thiazole which reacted with O-, S-, and N-centered nucleophiles at the C⁵ atom with high regioselectivity.     

Carbonyl complexes of manganese, rhenium and molybdenum with ethynyliminopyridine ligands

[MBr(CO)₅] reacts with m-ethynylphenylamine and pyridine-2-carboxaldehyde in refluxing tetrahydrofuran to give, fac-[MBr(CO)₃(py-2-CHN-C₆H₄-m-(CCH))] (M = Mn, 1a; Re, 2a). The same method affords the tetracarbonyl [Mo(CO)₄{py-2-CHN-C₆H₄-m-(CCH)}] (3a) starting from [Mo(CO)₄(piperidine)₂]; and the methallyl complex [MoCl(η³-C₃H₄Me-2)(CO)₂{py-2-CHN-C₆H₄-m-(CCH)}] (4a) from [MoCl(η³-C₃H₄Me-2)(CO)₂(NCMe)₂]. The use of p-ethynylphenylamine gives the corresponding derivatives (1b, 2b, 3b, and 4b) with the ethynyl substituent in the para-position at the phenyl ring of the iminopyridine. All complexes have been isolated as crystalline solids and characterized by analytical and spectroscopic methods. X-ray determinations, carried out on crystals of 1a, 1b, 2a, 2b, 3b, 4a, and 4b, reveals the same structural type for all compounds with small variations due mainly to the different size of the metal atoms. The reaction of complexes 1a or 2a with dicobalt octacarbonyl affords the tetrahedrane complexes [MBr(CO)₃{py-2-CHN-C₆H₄-m-{(μ-CCH)Co₂(CO)₆}}] (M = Mn, 5; Re, 6), the structures of which have been confirmed by an X-ray determination on a crystal of compound 5.     

DFT studies of unique stereoelectronic effects of substituents on divergent reaction pathways of methylenecyclobutanone radical cations

The results of DFT investigation suggest that C2–C3 bond cleavage of the 2,2-dianisyl-3,3-dimethyl-4-methylenecyclobutanone radical cation (2b⁺) is preferred from both a thermodynamic and a kinetic perspective while C1–C2 bond cleavage is both thermodynamically and kinetically favored in the parent methylenecyclobutanone radical cation (MCB⁺) and the 2,2-diphenyl- and 2,2-dianisyl-4-isopropylidenecyclobutanone radical cations (1a-b⁺). The DFT calculations also suggest that a bonding character exists in C2–C3 bond of the 2,2-diphenyl-3,3-dimethyl-4-methylenecyclobutanone radical cation (2a⁺) but not in that of 2b⁺. Consequently, the unique reactivity of 2b⁺ can be accounted for by the existence of the steric hindrance between methyl and anisyl substituents, which favors C2–C3 bond cleavage, and the absence of C2–C3 bonding character. Those results support that the previous experimental results of photoinduced electron-transfer reactions of 1 and 2. The combined factors comprise stereoelectronic substituent effects that lead to a drastic change in the reaction pathways followed by 2b⁺ relative to that of other methylenecyclobutanone-type radical cations.     

Reactions of <Emphasis Type="Italic">N</Emphasis>-(2,2-dichloro-1-cyanoethenyl)-<Emphasis Type="Italic">N</Emphasis>′-methyl(phenyl)ureas with aliphatic amines

Novel derivatives of 3,3-dichloroprop-2-enenitrile containing methylurea or phenylurea fragments have been synthesized. The obtained N-(2,2-dichloro-1-cyanoethenyl)-N′-methyl(phenyl)ureas undergo intramolecular cyclization in the presence of triethylamine to form 4-(dichloromethylidene)-5-imino-1-methyl (phenyl)imidazolidin-2-ones. Reactions of N-(2,2-dichloro-1-cyanoethenyl)-N′-methylurea with aliphatic amines have afforded 4-(alkylamino)-4-(dichloromethyl)-5-imino-1-methylimidazolidin-2-ones.     

Reactions of <Emphasis Type="Italic">N</Emphasis>-(2,2,2-trichloroethylidene)- and <Emphasis Type="Italic">N</Emphasis>-(2,2-dichloro-2-phenylethylidene)arenesulfonamides with biuret

N-(2,2,2-Trichloroethylidene)- and N-(2,2-dichloro-2-phenylethylidene)arenesulfonamides react with an equimolar amount of biuret to give 1-(1-arylsulfonylamino-2,2,2-trichloroethyl)- or 1-(1-arylsulfonylamino-2,2-dichloro-2-phenylethyl)biurets. The reactions with 2 equiv of N-(polychloroethylidene)arenesulfonamides involve both amino groups in the biuret molecule, yielding the corresponding 1,5-bis(1-arylsulfonylamino-2,2,2-trichloroethyl)- and 1,5-bis(1-arylsulfonylamino-2,2-dichloro-2-phenylethyl)biurets.     

About the different reactivity of dinuclear palladium and platinum compounds with trispyrrolylphosphine: Synthesis and X-ray crystallographic results of new palladium complexes containing P-pyrrolyl bonds

The reaction of [Pt(μ-Cl)(κ,η²-COE-MeO)]₂ (2) (COE-MeO = 2-methoxy-5-cycloocten-1-yl) with trispyrrolylphosphine yields [PtCl{P(pyrl)₃}(κ,η²-COE-MeO)] (3), in contrast to the crown-cycle complex [Pd(μ-Cl) {P(pyrl)₃}]₈ (1) obtained with the analogous palladium complex. The different reactivity has been explained in terms of the higher lability of the carbon-carbon double bond in the starting palladium compound, as compared with the related platinum derivative. The reaction of 1 with the ligand 2-[(pyridin-2-ylmethylene)aminophenol], (HNN′O), in the presence of thalium salt and NEt₃, yields the complex [Pd(κ³N,N′,O-py-CHN-C₆H₄O)(P(O)(pyrl)₂)] (5), which contains, for the first time, a di(N-pyrrolyl)phosphonato-P ligand. Treatment of [PdCl(κ³N,N′,O-py-CHN-C₆H₄O)] with P(pyrl)₃ gives the amido derivative [PdCl{κ³P,N,N-(P(pyrl)₂-O-C₆H₄-N-CH(CH₂-CO-CH₃)-py)}] (7), which displays a N-Pd-P-O-C₂ six-membered metallacycle. In addition, the latter compound has been able to insert an acetone molecule into its framework. The crystal structures of 5 and 7 were solved by X-ray diffraction analysis.     

An efficient dehyrohalogenation method for the synthesis of α,β,β-trifluorostyrenes, α-chloro-β,β-difluorostyrenes and E-1-arylperfluoroalkenes

Dehydrofluorination of 1-aryl-1,2,2,2-tetrafluoroethanes (ArCHFCF₃) and 1-aryl-1-chloro-2,2,2-trifluoroethane (ArCHClCF₃) using lithiumhexamethyldisilazide (LHMDS) in tetrahydrofuran (THF) at room temperature produced 1,2,2-trifluorostyrene and 1-chloro-2,2-difluorostyrene, respectively, in very good isolated yields. Dehydrofluorination of 1,2,2,3,3,3-hexafluoro-1-phenyl-propane (PhCHFCF₂CF₃) and 1,2,2,3,3,4,4,4-octafluoro-1-phenyl-butane (PhCHFCF₂CF₂CF₃) using LHMDS produced the corresponding substituted olefins (1-phenyl-1,2,3,3,3-pentafluoroprop-1-ene and 1-phenyl-1,2,3,3,4,4,4-pentafluorobut-1-ene) in good yield and high E-selectivity. Dehydrofluorination of 1-chloro-1-phenyl-2,2,3,3,3-pentafluoropropane (PhCHClCF₂CF₃) and 1-chloro-1-phenyl-2,2,3,3,4,4,4-heptafluorobutane (PhCHClCF₂CF₂CF₃) produced a mixture of the corresponding E and Z olefins (PhCClCFCF₃ and PhCClCFCF₂CF₃) in good yield.     

N-(2,2-Dichloro-2-phenylethylidene)arenesulfonamides in reactions with secondary amines

N-(2,2-Dichloro-2-phenylethylidene)arenesulfonamides were synthesized by a modified procedure, and their reactions with secondary amines were studied for the first time. Reactions of imines with dialkylamines proceed at room temperature to afford α,α-dichloromethylbenzene and N,N-dialkyl-N′-(arenesulfonyl)formamidines arising from the haloform cleavage of the initially formed unstable N-(1-dialkylamino-2,2-dichloro-2-phenylethyl)arenesulfonamides. When the reaction is carried out upon cooling to 0°C, the products of the nucleophilic addition of secondary amines to azomethines, N-(1-dialkylamino-2,2-dichloro-2-phenylethyl) are formed in yields of no higher than 5%. Nonempirical calculations of ¹³C-¹H spin-spin coupling constants and their experimental measurements for the series of the synthesized N-arenesulfonamides were performed to show that these compounds exist in solutions exclusively as E isomers. Preferable conformations of the investigated compounds and the relative energies of their E and Z isomers in the gas phase were determined by quantum-chemical calculations at the MP2/6-311G** level of theory. The NMR spectral data revealed restricted rotation of the N,N-dialkylamino group about the partially double C-NAlk₂ bond in the molecules of N-arenesulfonylformamidines.     

Structural and spectral studies of 3-(2-hydroxyphenylimino)-1-phenylbutan-1-one and its diorganotin(IV) complexes

Two diorganotin(IV) complexes of the general formula R₂Sn[Ph(O)CCH-C(Me)N-C₆H₄(O)] (R = Ph, 1a; R = Me, 1b) have been synthesized from the corresponding diorganotin(IV) dichlorides and the ligand, 3-(2-hydroxyphenylimino)-1-phenylbutan-1-one (1) in methanol at room temperature in presence of triethylamine. Both compounds have been characterized by elemental analyses, IR and ¹H, ¹³C, ¹⁵N, ¹¹⁹Sn NMR spectra. The structures of the free ligand and the complexes have been confirmed by single crystal X-ray diffraction. There are three independent molecules in the crystal structure of the ligand 1 and in all three the O-bound proton is transferred to the imine nitrogen and makes an intramolecular N-H?O hydrogen bond with the carbonyl oxygen. In turn this makes an intermolecular hydrogen bond with the phenolic H atom. The crystal structure of 1 is trigonal and a new polymorph; triclinic and monoclinic forms have already been published. In 1a, the central tin atom adopts distorted trigonal-bipyramidal coordination geometry whereas in dimeric 1b it is distorted octahedral when including the intermolecular Sn-O(phenolic) bond [2.7998(20) Å]. The δ (¹¹⁹Sn) values for the complexes 1a and 1b are −306.6 and −127.9 ppm, respectively, thus indicating penta-coordinated Sn centres in solution.     

Synthesis, characterization and crystal structures of polymeric and dimeric triphenyltin(IV) complexes of 4-[((E)-1-{2-hydroxy-5-[(E)-2-(2-carboxyphenyl)-1-diazenyl]phenyl}methylidene)amino]aryls

The triphenyltin(IV) complexes of 4-[((E)-1-{2-hydroxy-5-[(E)-2-(2-carboxyphenyl)-1-diazenyl]phenyl}methylidene)amino]aryls (aryls = 4-CH₃, 4-Br, 4-Cl, 4-OCH₃) have been synthesized and characterized by ¹H-, ¹³C-, ¹¹⁹Sn-NMR, ESI mass spectrometry, IR and ^119mSn Mössbauer spectroscopic techniques in combination with elemental analysis. The crystal structures of a representative carboxylate ligand (aryl = 4-CH₃) and three Sn complexes, viz., polymeric (Ph₃Sn[O₂CC₆H₄{NN(C₆H₃-4-OH(C(H)NC₆H₄X-4))}-o])_n (X = Me (1) and Br (2)) and dimeric (Ph₃Sn[O₂CC₆H₄{NN(C₆H₃-4-OH(C(H)NC₆H₄X-4))}-o])₂ (X = OMe (4)) complexes are reported. The coordination environment in each complex is trigonal bipyramidal trans-Ph₃SnO₂. A single zwitterionic carboxylate ligand bridges adjacent Sn atoms via the carboxylate and phenoxide O atoms.     

Reactions of (1S,3S)-3-acetoxymethyl-1-(2-acetoxyvinyl)-2,2-dimethylcyclopropane with haloforms under conditions of phase-transfer catalysis

Heating of (1S,3S)-3-acetoxymethyl-1-(2-acetoxyvinyl)-2,2-dimethylcyclopropane with bromoform under phase-transfer catalysis affords dibromocyclopropane viaaddition of dibromocarbene to the double bond. In an analogous reaction with chloroform, the trichloromethyl anion adds to the double bond in the -position with respect to the acetoxy group.     

Synthesis and characterization of isomeric 4- and 8-(σ-CHCHPh)-closo-ruthenacarboranes with η:η-phosphacarbocyclic ligand

Reactions of [3,3-(PPh₃)₂-3-Cl-3-H-3,1,2-closo-RuC₂B₉H₁₁] (1) and its exo-nido isomer [exo-5,6,10-{Ru(Ph₃P)₂Cl}-5,6,10-(μ-H)₃-10-H-7,8-nido-C₂B₉H₈] (2) with NH₄PF₆ in methanol or ethanol solution followed by heating in the presence of an excess of phenylacetylene (3) affords a mixture of two isomeric closo species [3,3-{(1′-3′-η³):(5′,6′-η²)-ortho-C₆H₄PPh₂CHC(Ph)CHCHPh}-8-(σ-CHCHPh)-3,1,2-closo-RuC₂B₉H₁₀] (4) and [3,3-{(1′-3′-η³):(5′,6′-η²)-ortho-C₆H₄PPh₂CHC(Ph)CHCHPh}-4-(σ-CHCHPh)-3,1,2-closo-RuC₂B₉H₁₀] (5) in which boron vertexes in β- and α-sites with respect to the cage carbons bear the (E)-CHCHPh group. The X-ray diffraction study of 4 together with the multinuclear NMR data for 4 and 5 revealed that such an unusual η³:η²-phosphacarbocyclic ligand in both isomeric complexes is formed by specific insertion of the initially metal-bound PPh₃ group into the chain of two alkyne molecules coupled in a “head-to-tail” fashion around the metal vertex.     

Synthesis of 2-chloro-1,1-difluoroallyl mesylates through novel rearrangement and CC bond formation by their Pd-catalyzed reaction with diethylzinc

Treatment of 2-chloro-3,3-difluoroprop-2-en-1-ol derivatives (2) with methanesulfonyl chloride in the presence of a base did not give the expected esters but 2-chloro-1,1-difluoroprop-2-enyl methanesulfonates (4) through a novel [3,3] sigmatropic rearrangement. Reaction of 4 with diethylzinc in the presence of tetrakis(triphenylphosphine) palladium gave 1-alkyl- or 1-aryl-2-chloro-3-fluoropenta-1,3-dienes in moderate to good yields through a CC bond formation followed by dehydrofluorination.     

Novel processable and heat resistant poly(phenylthiourea azomethine imide)s: Synthesis and characterization

N-(4-chloro-3-aminobenzal)N′(4-aminophenyl)thiourea having phenylthiourea and azomethine groups was synthesized and exploited as starting material for the fabrication of new polymers. Novel diamine was condensed with pyromellitic dianhydride, 3,3′,4,4′-benzophenone-tetrcarboxylic dianhydride and 4,4′-(hexafluoroisopropylidene) diphthalic dianhydride to obtain poly(phenylthiourea azomethine imide)s. The structural explication of monomers and poly(phenylthiourea azomethine imide)s were carried out by FTIR, ¹H and ¹³C NMR techniques along with crystallinity, organosolubility, inherent viscosity and molecular weight measurements. Accordingly, polymers bearing CS and -CN- moieties in the backbone demonstrated an amorphous nature and were readily soluble in amide solvents such as DMAc, DMF, and DMSO. Poly(phenylthiourea azomethine imide)s encompassed η_inh of 1.40-1.55 dL/g and were obtained in quantitative yields. In addition, GPC measurements of polymers revealed M_w around 60,291-67,665. Thermal stability of these polymers was ascertained via 10% weight loss temperatures around 514-533 °C in an inert atmosphere. Besides, glass transition temperatures of polyimides were found to be 272-276 °C.     

Some reactions of 2-chloro-3-(<Emphasis Type="Italic">β</Emphasis>-chloroethyl)-4,6-dihydroxypyridine

The chemical properties of 2-chloro-3-(β-chloroethyl)-4,6-dihydroxypyridine (I) have been studied. It has been shown that this compound, which is relatively stable in acids and in neutral and, particularly, in alkaline media, readily splits off hydrogen chloride under mild conditions and is converted into derivatives of 2, 3-dihydro-5-azabenzofuran. The dehalogenation of I in an acid medium yielded 3-(β-chloroethyl)-4, 6-dihydroxypyridine, which was converted into 4, 6-dichloro-3-(β-chloroethyl)pyridine and into 6-chloro-4-methoxy-3-vinylpyridine.     

Über die Umsetzung von 6-Chlor-4-phenyl-3,4-dihydro-1H-2,1,3-benzothiadiazin-2,2-dioxid mit 1,4-Dijodbutan

Zusammenfassung Bei der Umsetzung des Dinatriumsalzes von 6-Chlor-4-phenyl-3,4-dihydro-1H-2,1,3-benzothiadiazin-2,2-dioxid (1) mit 1,4-Dijodbutan inDMF wurde das erwartete 1,3-Butano-derivat nich erhalten.1 wurde einerseits zu 6-Chlor-4-phenyl-1H-2,1,3-benzothiadiazin-2,2-dioxid (4) dehydriert, andrerseits traten je nach Herstellungsweise des Dinatriumsalzes Methylierungsreaktionen ein bzw. es entstanden 6-Chlor-1-(4-jodbutyl)-4-phenyl-3,4-dihydro-1H-2,1,3-benzothiadiazin-2,2-dioxid (7) und 6,6-Dichlor-4,4-diphenyl-3,3,4,4-tetrahydro-3,3-tetramethylenbis(1H-2,1,3-benzothiadiazin)-2,2,2,2-tetroxid (8).

---

Reaction of 6-chloro-4-phenyl-3,4-dihydro-1H-2,1,3-benzothiadiazine-2,2-dioxide with 1,4-Diiodobutane. (Cyclic and bicyclic sulfamides III)

On reaction of the disodium salt of 6-chloro-4-phenyl-3,4-dihydro-1H-2,1,3-benzothiadiazine-2,2-dioxide (1) with 1,4-diiodobutane inDMF the expected 1,3-butano derivative was not obtained. On the one hand1 was dehydrogenated to give 6-chloro-4-phenyl-1H-2,1,3-benzothiadiazine-2,2-dioxide (4), on the other hand according to the method of preparation of the disodium salt either methylation reactions occured or 6-chloro-1-(4-iodobutyl)-4-phenyl-3,4-dihydro-1H-2,1,3-benzothiadiazine-2,2-dioxide (7) and 6,6-dichloro-4,4-diphenyl-3,3,4,4-tetrahydro-3,3-tetramethylenebis(1H-2,1,3-benzothiadiazine)-2,2,2,2-tetroxide (8) were formed.

---

---

Herrn Prof. Dr.H. Nowotny gewidmet.