Adsorption of hexavalent chromium on manganese nodule leached residue obtained from NH3-SO2 leaching

Adsorption of hexavalent chromium onto manganese nodule leached residues was investigated as a possible alternative to the conventional methods of its removal from aqueous synthetic solutions. Adsorption behavior was studied as a function of time, pH, temperature, and concentration of adsorbate and adsorbent in acetic acid-sodium acetate buffer medium. Cr (VI) removal was pH dependent and was found to be of a maximum at pH 3. The applicability of the Langmuir isotherm to the present system was tested. Increased adsorption capacity with increased temperature indicates that the adsorption reaction was endothermic in nature. Based on these studies, thermodynamic parameters such as Gibbs free energy change (DeltaG0), standard enthalpy change (DeltaH0), and standard entropy change (DeltaS0) were calculated.     

Biosorption characteristics of uranium(VI) from aqueous solution by pummelo peel

The biomass pummelo peel was chosen as a biosorbent for removal of uranium(VI) from aqueous solution. The feasibility of adsorption of U(VI) by Pummelo peel was studied with batch adsorption experiments. The effects of contact time, biosorbent dosage and pH on adsorption capacity were investigated in detail. The pummelo peel exhibited the highest U(VI) sorption capacity 270.71?mg/g at an initial pH of 5.5, concentration of 50???g/mL, temperature 303?K and contacting time 7?h. The adsorption process of U(VI) was found to follow the pseudo-second-order kinetic equation. The adsorption isotherm study indicated that it followed both the Langmuir adsorption isotherm and the Freundlich adsorption isotherm. The thermodynamic parameters values calculated clearly indicated that the adsorption process was feasible, spontaneous and endothermic in nature. These properties show that the pummelo peel has potential application in the removal of the uranium(VI) from the radioactive waste water.     

Equilibrium and kinetic studies of adsorption of phosphate onto ZnCl2 activated coir pith carbon

Phosphate removal from aqueous solution was investigated using ZnCl₂-activated carbon developed from coir pith, an agricultural solid waste. Studies were conducted to delineate the effect of contact time, adsorbent dose, phosphate concentration, pH, and temperature. The adsorption equilibrium data followed both Langmuir and Freundlich isotherms. Langmuir adsorption capacity was found to be 5.1 mg/g. Adsorption followed second-order kinetics. The removal was maximum in the pH range 3–10. pH effect and desorption studies showed that adsorption occurred by both ion exchange and chemisorption mechanisms. Adsorption was found to be spontaneous and endothermic. Effect of foreign ions on adsorption shows that perchlorate, sulfate, and selenite decreased the percent removal of phosphate.     

Removal of copper(II) from aqueous solution with rape stalk modified by citric acid

In this paper, rape stalk was modified with citric acid (CA) to prepare copper ion biosorbent. The modified rape stalk (MRS) was characterized by Fourier transforms infrared (FTIR), zeta potential, and thermogravimetric analysis (TGA). The effects of various parameters like initial Cu²⁺ concentration, contact time, initial pH, and temperature on adsorption capacity were studied. The adsorption capacity of MRS at 298 K was 69.84 mg/g, far higher than 18.24 mg/g for native rape stalk (NRS). The adsorption mechanism was also evaluated in terms of kinetics and thermodynamics. The adsorption equilibrium data was well described by the Langmuir isotherm model. The adsorption process followed the pseudo-second-order rate kinetics. Thermodynamic study showed spontaneous and endothermic nature of the adsorption process. The ion exchange of the adsorption mechanism was affirmed. MRS could be a potentially low-cost and green adsorbent for removal of Cu²⁺ from aqueous solution.     

Synthesis and performance evaluation of chitosan/zinc oxide nanocomposite as a highly efficient adsorbent in the removal of reactive red 198 from water

In this study, Chitosan and Chitosan-zinc oxide (ZnO) nanocomposite were prepared and applied as a low-cost adsorbent with high adsorption capacity for removing reactive red 198 (RR 198) dye from contaminated water. After preparation, it was characterized using FT-IR, XRD, and SEM. The effect of pH, temperature, time, adsorbent amount, and initial dye concentration were investigated in the removal efficiency of RR 198. The maximum adsorption capacity (q_m) obtained from the Langmuir equation was 172.41 mg/g in adsorbent dose of 0.1 g/L, pH: 4, temperature of 25°C, adsorption time of 40 min. The thermodynamic parameters demonstrated the spontaneous and endothermic nature of the adsorption process. Due to the high efficiency of chitosan/ZnO nanocomposite in removal of RR 198 from water and advantages such as high adsorption capacity, simple synthesis, and easy application, it can be used as an effective method in the removal of RR 198 from water.     

Adsorption of U(VI) ions from low concentration uranium solution by thermally activated sodium feldspar

The thermally activated sodium feldspar (TASF), a novel material, was prepared by calcinating the micron sodium feldspar (SF) at 450 °C for 45 min. The TASF and the SF were characterized using X-ray diffraction and mercury injection porosimetry, and the TASF was found to have larger specific surface area and larger porosity than SF. The effects of the initial pH, temperature, contact time and initial U(VI) ions concentration on the adsorption of U(VI) ions from the low concentration uranium solution by TASF were investigated. The maximum adsorption efficiency of TASF for 0.5 mg/L uranium solution amounted to 95.49 % when the initial pH was 5.0, the temperature, 318 K, and and the contact time, 600 min. The relationship between the adsorption capacity q _e and equilibrium concentration C _e can well be described by Freundlich equation. Adsorption isotherm and the analysis by FT-IR coupled with SEM revealed that U(VI) ions were adsorbed onto the surface of TASF in multimolecular or cluster states, and that the intraparticle diffusion occurred in spontaneous process. The basic thermodynamic parameters including free energy change, entropy change and enthalpy change were calculated to comprehend the intrinsic features and spontaneous nature of the adsorption process. The FT-IR spectroscopic characterization for the TASF indicated that many groups were involved in the adsorption process of U(VI) ions, and the –OH group played a more important role. The experimental results suggested that TASF had great adsorption efficiency and strong potentiality of enrichment and recovery for the low concentration U(VI).     

Enhanced Removal of Cu(II) Ions from Aqueous Solution by Poorly Crystalline Hydroxyapatite Nanoparticles

Poorly crystalline and well-dispersed hydroxyapatite (HAP) nanoparticles were synthesized and used as novel adsorbents for the removal of Cu(II) from aqueous solution. Various factors affecting the adsorption such as adsorbent crystallinity, pH, adsorbent dosage, contact time, temperature, competing cations, and the presence of humic acid were investigated in detail. Results showed that the HAP calcined at lower temperature was poorly crystalline and had better adsorption capacity for Cu(II) than those calcined at higher temperature. Cu(II) removal was increased with increases of pH, adsorbent dosage, temperature, and the presence of humic acid, but decreased as the existence of competing divalent cations. Kinetic studies showed that pseudo-second-order kinetic model better described the adsorption process. Equilibrium data were best described by Langmuir model, and the estimated maximum adsorption capacity of poorly crystalline HAP was 41.80 mg/g at 313 K, displaying higher efficiency for Cu(II) removal than many previously reported adsorbents. Thermodynamics studied revealed that the adsorption of Cu(II) by poorly crystalline HAP was spontaneous, endothermic, and entropy-increasing in nature. This study showed that poorly crystalline HAP could be used as an efficient adsorbent material for the removal of Cu(II) from aqueous solution.     

Fabrication of a magmolecule using nanoparticle and evaluation of its adsorption capacity for selenium ions from nuclear wastewater

The purpose of present study is to fabrication of a magmolecule (amino-functionalized magnetite nanoparticles) and evaluation of its adsorption capacity for selenite (SeO₃ ^2?) ions from nuclear wastewater. To accomplish this, synthesized magnetite nanoparticles is coated with a layer of SiO₂ in order to be chemically stable and then functionalized with 3-aminopropyl triethoxysilane (APTES) to be more effective. Adsorption of SeO₃ ^2? ions was investigated in batch technique. The effect of parameters such as solution pH, presence of competing anions using sulfuric acid and nitric acid (NO₃ ^?, HSO₄ ^? and SO₄ ^2?) and temperature were studied. Maximum adsorption occurred at pH 2.4 for magnetite (naked nanoparticle) and 1.7 for functionalized nanoparticles, while the dose of adsorbent was 1 g/L and selenite ion concentration was 50 mg/L. sulfuric acid was selected as the better acidic agent for controlling pH of solution. Thermodynamic parameters were also calculated and it has been found that the adsorption was endothermic. The obtained result showed that the naked particles had more adsorption capacity but it has been suggested usage of functionalized particles in the magmolecule process duo to stability and reusable capability.     

层状氢氧化镁铝焙烧产物对SCN~-的吸附性能

研究了层状氢氧化镁铝焙烧产物对SCN-的吸附行为,考察了焙烧温度、吸附温度、时间、pH值等因素对吸附的影响.在SCN-初始浓度为25 mg/L,温度为40℃,焙烧物投加量为2 g/L,pH值为6的条件下,4 h达到吸附平衡,SCN-脱除率可达96.91%.吸附过程符合Langmu ir等温方程式,主要是单分子层的吸热吸附.     

Assessment of <Emphasis Type="Italic">Urtica</Emphasis> as a low-cost adsorbent for methylene blue removal: kinetic,equilibrium, and thermodynamic studies

Methylene blue (MB) removal using eco-friendly, cost-effective, and freely available Urtica was investigated. The morphology of the adsorbent surface and the nature of the possible Urtica and MB interactions were examined using SEM analysis and the FTIR technique, respectively. Various factors affecting MB adsorption such as adsorption time, initial MB concentration, temperature, and solution pH were investigated. The adsorption process was analysed using different kinetic models and isotherms. The results showed that the MB adsorption kinetic follows a pseudo-second-order kinetic model and the isotherm data fit the Langmuir isotherm well. Thermodynamic parameters, such as ΔG°, ΔH°, and ΔS°, were also evaluated, and the results indicated that the adsorption process is endothermic and spontaneous in nature. The MB adsorption capacity of Urtica was found to be as high as 101.01 mg g^?1, higher than those of many other adsorbents studied in the literature. This superior adsorption capacity, along with the ready availability of Urtica, render this adsorbent potentially suitable for practical applications.     

Adsorption of fluoride from aqueous solution by graphene

A batch adsorption system was applied to investigate the adsorption of fluoride from aqueous solution by graphene. The adsorption capacities and rates of fluoride onto graphene at different initial pH, contact time, and temperature were evaluated. The experimental results showed that graphene is an excellent fluoride adsorbent with an adsorption capacity of up to 17.65 mg/g at initial fluoride concentration of 25 mg/L and temperature of 298 K. The isotherm analysis indicated that the adsorption data can be well described by Langmuir isotherm model. Thermodynamic studies revealed that the adsorption reaction was a spontaneous and endothermic process.     

H3PO4改性PS-EDTA树脂对水相中Cu2+、Zn2+和Cd2+的吸附性能研究

大孔氯甲基化聚苯乙烯小球先后与乙二胺、2-氯乙酸反应得EDTA型螯合树脂(PS-EDTA),再用磷酸在室温处理得PS-EDTA/P树脂。PS-EDTA/P树脂被用于水相中Cu2+、Zn2+和Cd2+的吸附净化处理,探讨了溶液的pH值、初始金属离子浓度、时间、温度等因素对吸附性能的影响,并研究了其对重金属离子的吸附动力学和热力学。结果表明,PS-EDTA/P树脂对Cu2+和Zn2+的吸附符合Langmuir等温式、对Cd2+的吸附符合Freundlich等温式,准二级吸附动力学方程能够很好地描述3种金属离子在树脂上的吸附动力学行为。同时,PS-EDTA/P树脂对重金属吸附的热力学参数表明,PS-EDTA/P树脂对Cu2+、Zn2+和Cd2+的吸附是一个自发的、吸热的过程。已吸附Cu2+、Zn2+和Cd2+的树脂可以用0.1mol/L HCl解吸,解吸后的树脂对Cu2+、Zn2+和Cd2+仍具有较高的吸附量。     

Insight the mechanism of MgAl/layered double hydroxide supported on rubber seed shell biochar for Remazol Brilliant Violet 5R removal

The ever-increasing concentration of Remazol Brilliant Violet 5R discharged mainly from textile industry had cause serious environmental issues towards human and the surrounding ecosystem. Therefore, solving the issue related to dye contamination is seriously important. In this research study, MgAl/layered double hydroxide supported on rubber seed shell biochar (RSSB) had been prepared for Remazol Brilliant Violet 5R (RBV5R) dye adsorption. BET surface area and pore volume of RSSB were found to be 132.40 m²/g and 0.0732 cm³/g, respectively with presence of LDH metals on the RSSB surfaces. The batch adsorption studies showed that RBV5R uptake capacity was significantly enhanced (125.88 mg/g) compared to pristine RSSB (58.69 mg/g) at initial RBV5R concentration, contact time, adsorption temperature and pH of 300 mg/l, 1440 min, 60 °C and pH 2, respectively. The equilibrium and kinetic adsorption data were best fitted into the Freundlich and pseudo-first order model, respectively. The thermodynamic study confirmed the RBV5R adsorption was endothermic in nature and governed by physisorption process. All these findings signified that the MgAl/LDH-RSSB is a promising adsorbent for treating wastewater containing RBV5R dye.     

Removal of Reactive Yellow 84 from aqueous solutions by adsorption onto hydroxyapatite

The adsorption of a reactive dye, Reactive Yellow 84, from aqueous solution onto synthesized hydroxyapatite was investigated. The experiments were carried out to investigate the factors that influence the dye uptake by the adsorbent, such as the contact time under agitation, absorbent dosage, initial dye concentration, temperature and pH of dye solution. The experimental results show that the amount of dye adsorbed increases with an increase in the amount of hydroxyapatite. The maximum adsorption occurred at the pH value of 5. The equilibrium uptake was increased with an increase in the initial dye concentration in solution. The experimental isotherm data were analyzed using Langmuir isotherm equation. The maximum monolayer adsorption capacity was 50.25 mg/g. The adsorption has a low temperature dependency and was endothermic in nature with an enthalpy of adsorption of 2.17 kJ mol⁻¹.     

Uranium adsorption studies on hydrothermal carbon produced by chitosan using statistical design method

A new hydrothermal cross-linking chitosan (HCC) was prepared by hydrothermal reaction at a mild temperature (180 °C) to diminish the solubility in acid solution, and the amine groups were almost retained during the hydrothermal reaction characterized by FT-IR and the dissolution rate in pH 3 solution decreased from 89.6 to 12.6 %. The effects of initial pH, contact time, initial concentration and temperature on the sorption capacity are discussed using 24 full-factorial central composite design using response-surface methodology. The HCC showed the highest uranium sorption capacity at initial pH of 7.92 and contact time of 273.6 min with 24 full-factorial central composite design and the maximum adsorption capacity was 273 mg/g. The adsorption process could be well defined by the Langmuir isotherm and the thermodynamic parameters, ?G°(298 K), ?H° and ?S°, demonstrated shown that the sorption process of U(VI) onto HCC was feasible, spontaneous and endothermic in nature.     

Quartzite an efficient adsorbent for the removal of anionic and cationic dyes from aqueous solutions

Quartzite obtained from local source was investigated for the removal of anionic dye congo red (CR) and cationic dye malachite green (MG) as an adsorbent from aqueous solution in batch experiment. The adsorption process was studied as a function of dye concentration, contact time, pH and temperature. Adsorption process was described well by Langmuir and Freundlich isotherms. The adsorption capacity remained 666.7 mg/g for CR dye and 348.125 mg/g for MG dye. Data was analyzed thermodynamically, ΔH⁰ and ΔG⁰ values proved that adsorption of CR and MG is an endothermic and spontaneous process. Adsorption data fitted best in the pseudo-first order kinetic model. The adsorption data proved that quartzite exhibits the best adsorption capacity and can be utilized for the removal of anionic and cationic dyes.     

果胶对钯的吸附及其在有机合成中的应用

以果胶为吸附剂,研究其对钯(Ⅱ)的吸附性能,探讨了溶液的pH值、吸附温度、果胶用量、吸附时间及钯(Ⅱ)溶液的初始浓度对吸附量的影响。 采用Pseudo-First-order、Pseudo-Second-order、Intraparticle、Diffusion、Langmuir、Freundlich和Temkin等模型对实验数据进行线性拟合。 结果表明,果胶对钯(Ⅱ)有很强的吸附性能,吸附率高达96%以上,溶液的最佳pH值为6.5,最佳温度为50 ℃,果胶对钯的吸附量随果胶用量的增加而降低,随钯溶液初始浓度的增加而增加。 吸附动力学遵从Pseudo-Second-order模型,即以化学吸附为主;等温吸附过程符合Freundlich方程;吉布斯自由能为负值,焓变和熵变分别为3.23 kJ/mol和13.32 J/(mol·K),即该过程是自发吸热的;果胶吸附的钯作为催化剂应用到Suzuki反应中,结果表明该催化剂有较高的催化活性。     

Removal of nickel ions by adsorption on nano-bentonite: Equilibrium,kinetics, and thermodynamics

Nano-bentonite was used as an adsorbent to remove nickel ions from aqueous solutions. Experimental investigation was carried out to identify the effect of pH, contact time, initial concentration, and adsorbent dose of Ni(II). Equilibrium data were described by and fitted to Langmuir, Freundlich, and Dubinin–Radushkevich models. Results showed that the optimum conditions for the removal of the Ni(II) are initial concentration 100 mg/L, adsorbent dose 0.5 g, and pH 6. Surface morphology and functionality of nano-bentonite were characterized by SEM and FTIR. The kinetics data were more accurately described by pseudo-second-order model. The intra-particle diffusion model gave multi-linear curves, so more than one step controlled the adsorption process. Nano-bentonite removed nickel with maximum adsorption capacity of 39.06 mg/g (30°C, pH) and thermodynamic data indicated that adsorption reaction is spontaneous and of an endothermic nature.     

碧螺春绿茶对碱性染料灿烂绿的吸附

为了探讨碧螺春茶叶用于吸附灿烂绿的可能性,研究了碧螺春绿茶吸附灿烂绿的最佳吸附条件及解吸附条件。研究结果表明,在吸附条件为当溶液起始p H值为4.1,茶叶与灿烂绿质量比为833∶1,接触时间为45 min,室温(25±1)℃时,茶叶对灿烂绿吸附率达80%,吸附量为0.96 mg/g。对Na OH、CH_3COOH和HCl3种解吸附剂的研究表明,最佳解吸附剂是Na OH,解吸1.5 h解吸率最高达93.20%。该吸附过程符合Langmuir等温吸附方程,属于单分子层吸附。吸附过程热力学参数自由能变化ΔG0,焓变ΔH=102.32 k J/mol0,熵变ΔS=0.33 k J/(mol·K)0,说明吸附过程是自发的吸热熵增过程。     

Enhanced adsorptive removal of toxic dyes using SiO2 nanofibers

Electrospinning method was used to synthesize porous SiO₂ nanofibers. The adsorption of Methyl Orange and Safranin O by porous SiO₂ nanofibers was carried out by varying the parameters such as pH, contact time, adsorbent dose, dye concentration, and temperature. Equilibrium adsorption data followed Langmuir isotherms. Kinetic adsorption followed second-order rate kinetics model. The maximum adsorption capacity for Methyl Orange and Safranin O was found to be 730.9 mg/g and 960.4 mg/g, respectively. Acidic pH was favorable for the adsorption of Methyl Orange while basic pH was favorable for the adsorptions of Safranin O. Modeling study suggested the major mode of adsorption, while thermodynamic study showed the endothermic reactions. This effort has pronounced impact on environmental applications of SiO₂ nanofibers as auspicious adsorbent nanofibers for organic material from aqueous solution.