海胆状ZnO纳米线阵列的制备及其光学性能

采用一种低成本的有效方法制备出了有序排列的海胆状ZnO纳米线阵列。首先利用自组装的方法得到了单层的聚苯乙烯(PS)小球,以其为模板用水热法在小球表面生长ZnO纳米线,得到了由PS小球和ZnO纳米线构成的海胆状结构。纳米线的直径均一,长度可通过水热反应时间进行控制。利用这种方法制备的一维ZnO纳米结构在传感器、太阳能电池及光催化领域有潜在的应用价值。     

Research on bamboo-like one dimensional o-BN nanowire

Orthorhombic boron nitride (oBN) nanowires with diameters ranging from 50–100 nm and lengths up to several tens micrometers was synthesized in a simple hydrothermal route. The as prepared sample has been characterized as oBN by SEM, HRTEM and SADP. Based on careful observation, unique bamboo-like nanostructures was found in the products. A probable formation mechanism of bamboo-like nanowires was discussed.     

Large-scale boron nanowire nanojunctions and their highly-oriented arrays

One-dimensional (1D) nanostructures, such as nanotubes and nanowires, have gen-erated worldwide interest due to their nano-scale sizes, high length-to-diameter ratios, highly anisotropic properties, various unique structures, and wide technological applica-tions. 1D nanostructures are the smallest dimension structures that can be used for effi-cient transport of electrons, vacancies, and excitations, and are thus critical building blocks in the construction of nanoscale electronic and mechanic…     

An easy way to controllably synthesize one-dimensional Sm B_6 topological insulator nanostructures and exploration of their field emission applications

A convenient fabrication technique for samarium hexaboride(SmB_6) nanostructures(nanowires and nanopencils) is developed, combining magnetron-sputtering and chemical vapor deposition. Both nanostructures are proven to be single crystals with cubic structure, and they both grow along the [001] direction. Formation of both nanostructures is attributed to the vapor-liquid-solid(VLS) mechanism, and the content of boron vapor is proposed to be the reason for their different morphologies at various evaporation distances. Field emission(FE) measurements show that the maximum current density of both the as-grown nanowires and nanopencils can be several hundred μA/cm~2, and their FN plots deviate only slightly from a straight line. Moreover, we prefer the generalized Schottky-Nordheim(SN) model to comprehend the difference in FE properties between the nanowires and nanopencils. The results reveal that the nonlinearity of FN plots is attributable to the effect of image potential on the FE process, which is almost independent of the morphology of the nanostructures.All the research results suggest that the SmB_6 nanostructures would have a more promising future in the FE area if their surface oxide layer was eliminated in advance.     

Optical absorption spectroscopy of one-dimensional silicon nanostructures

During the last decade there has been a great development in nanoscience and nanotechnology. The technology of nanostructures synthesis and characterization has grown rapidly and optical spectroscopy has become a very useful characterization technique, since it provides information on the structural, electronic, optical and dynamical properties of materials. Nanostructures have unique physical properties that are different from bulk materials. A wealth of interesting and new phenomena are associated with nanometer-sized structures, such as size-dependent emission or excitation, metallic and semiconductor behavior, etc. Here we present an overview of the linear optical response of one-dimensional silicon nanostructures. In particular, we make a theoretical study of the effects of the size and shape of one-dimensional silicon structures on the absorption spectrum, focusing on the calculation of the linear optical response of clean and hydrogen-adsorbed armchair (6,6) silicon nanotubes. We discuss the changes of the absorption spectrum of silicon nanowires with different diameters and analyze the behavior of the band gap as we go from bulk silicon to one-dimensional silicon nanostructures with nanometer-size diameters.     

Spin-wave quantization in ferromagnetic nickel nanowires

The dynamical properties of uniform two-dimensional arrays of nickel nanowires have been investigated by inelastic light scattering. Multiple spin waves are observed that are in accordance with dipole-exchange theory predictions for the quantization of bulk spin waves. This first study of the spin-wave dynamics in ferromagnetic nanowire arrays reveals strong mode quantization effects and indications of a subtle magnetic interplay between nanowires. The results show that it is important to take proper account of these effects for the fundamental physics and future technological developments of magnetic nanowires.     

Si(001)表面稀土金属硅化物纳米结构

稀土金属元素的硅化物在n型硅衬底上具有高电导率和低肖特基势垒的特点，在大规模集成的微电子器件领域具有很好的应用价值．文章系统介绍了在Si（001）表面自组装生长的稀土金属硅化物纳米结构的研究进展，较全面地讨论了退火温度、退火时间以及稀土金属表面覆盖度等生长条件对纳米结构生长的影响作用，并在此基础上分析了纳米线、纳米岛的晶化结构，衬底对纳米结构生长的影响，以及纳米结构的演化过程．搞清楚这些内在的生长机理，有助于人们今后实现可严格控制稀土金属硅化物纳米结构的形貌尺寸和分布的自组装生长．此外，文章还介绍了目前人们对稀土金属硅化物纳米线电学性质的研究进展．     

Pulsed-laser deposition and characterization of ZnO nanowires with regular lateral arrangement

We report on the high-pressure pulsed-laser deposition growth of periodic arrays of free-standing single zinc oxide nanowires with uniform hexagonal arrangement and cross-section with thickness of less than 100 nm. In order to achieve the wire alignment, we prepared an ordered array of catalytic gold seed particles by a nanosphere lithography mask transfer technique using monodisperse spherical polystyrol nanoparticles. These templates were investigated by scanning electron microscopy and atomic force microscopy prior to nanowire growth. X-ray diffraction revealed the epitaxial relationships between the nanostructures and the a-plane sapphire substrate and excellent crystal quality. The optical properties of the ZnO nanowire arrays were measured by cathodoluminescence. PACS 61.82.Rx; 81.05.-t; 81.05.Dz; 81.10.-h     

金催化的硅纳米线的可控制备及光学特性研究

硅纳米线是新型一维半导体纳米材料的典型代表。利用阳极氧化铝薄膜为模版复制出具有有序纳米结构的金膜,在金的催化辅助下对单晶硅进行湿法刻蚀,得到尺寸、形状、分布可控的硅纳米线阵列,并对其光学特性进行了研究。研究结果表明,金代替银作为催化剂,可以有效地抑制二次刻蚀,金的化学性质相对于银更加稳定,克服了银膜在较高的温度或较长刻蚀时间下产生的结构性破坏,得到形貌规整、尺寸可控的硅纳米线阵列。对该阵列在400 nm~1 200 nm波段的反射率、透过率进行了测试,并对比分析了金模板催化与传统方法机理的异同。测试结果表明,相较于传统金属辅助化学刻蚀法,文中提出的金模板催化法制备的硅纳米线阵列尺寸及分布更加均匀可控,在宽光谱范围内的抗反射性得到了显著提高。     

Tailoring optical properties of TiO2 nanowires coated with Ag nanoparticles by plasmon coupling of Ag nanoparticles

TiO₂ nanowires were grown on titanium foil by an alkali hydrothermal growth method. The as-synthesized nanowires are structurally uniform with diameters of 50-100 nm and lengths of up to a few micrometers. The as-prepared TiO₂ nanowires were coated with Ag nanoparticles by reducing AgNO₃ in solution. The experimental results indicate that the Ag nanoparticles can aggregate together on the surfaces of TiO₂ nanowires by interconnection between nanoparticles. The degree of aggregation of Ag nanostructures can be controlled by changing the concentrations of Ag nanoparticles. The as-prepared nanostructures exhibit a wide optical absorption from 387 to 580 nm that can be easily tuned by controlling the degree of aggregation of Ag nanostructures. The results reveal that optical properties of the Ag-coated TiO₂ nanowires can be enhanced by plasmon coupling of Ag nanoparticles. The as-prepared nanostructures may find potential applications in the field of solar cells.     

Effect of zinc sources on the morphology of ZnO nanostructures and their photoluminescence properties

The morphology and photoluminescence properties of ZnO nanostructures synthesized from deferent zinc sources by a vapor deposition process were investigated. The zinc sources involved pure zinc, ZnO, and ZnCO₃ powders, respectively. It was found that the zinc sources have a strong effect on the morphology of the ZnO nanostructures. For the pure zinc and ZnO sources, uniform ZnO nanowires and tetrapods are obtained, respectively. However, in the case of the ZnCO₃ source, the products are nanowire–tetrapod combined nanostructures, in which ZnO nanowires grow from the ends of tetrapod arms. The morphology differences of these products may be mainly concerned with the yield and constituents of the corresponding zinc vapor. Photoluminescence measurements show that the nanowires have a relatively stronger near-band UV emission than the other products. The strongest green-light emission from the tetrapods implies that more defects exist in the tetrapods. An evident peak at 430 nm is found in the spectrum of the nanowire–tetrapod combined nanostructures, which may be caused by oxygen-depletion interface traps. PACS 73.61.Tm; 81.10.Bk; 78.55.Et     

表面纳米结构的自组装生长

无论是对低维基本物理以及其中新奇量子现象的探索与认识,还是微电子工业水平的持续发展,都迫切地需要掌握一种能够精确、可靠地操控表面纳米结构的方法.自组织生长,即粒子聚集时由于介观尺度力场或受限运动作用而导致的自发有序现象,在原子尺度上可以实现对纳米结构的精确控制,而在介观尺度上又可以调节这些微观结构单元的组织构型.文章结合作者近年来在表面纳米结构生长与物理性质研究方面所做过的工作,从自组织生长的原理出发,介绍了对金属纳米线、有序分子薄膜以及合金量子点阵列生长进行人工操控的方法.     

Anti-ferroelectric polarization transitions in quantum-dot-quantum-well arrays

With the improvement in fabrication techniques it is now possible to produce atom-like semiconductor structures with unique electronic properties. This makes possible periodic arrays of nanostructures in which the Coulomb interaction, polarizability and tunneling may all be varied. This theoretical study investigates the collective properties of 2D arrays and 3D face-centered cubic lattices of singly charged nanospherical shells, sometimes called 'quantum dot-quantum wells' or 'core-shell quantum dots'. We find that, for square arrays, the classical ground state is an Ising anti-ferroelectric (AFE), while the quantum ground state undergoes a transition from a uniform state to an AFE. The triangular lattice, in contrast, displays properties characteristic of frustration. Three-dimensional face-centered cubic lattices polarize in planes, with each layer alternating in direction. We discuss the possible experimental signals of these transitions.     

Structures of planar defects in ZnO nanobelts and nanowires

Quasi-one-dimensional (1D) nanostructures, such as nanowires, nanobelts and nanorods, are the forefront materials for nanotechnology. To date, such nanostructures have been synthesized for a wide range of semiconductors and oxides, and they are potential building blocks for fabricating numerous nano-scale devices. 1D ZnO nanostructures, due to its unique semiconducting, piezoelectric, and bio-safe properties, have received wide attention. From structure point of view, a common characteristic of ZnO nanostructures is that they are mostly dislocation-free. However, planar and point defects do frequently exist in such nanostructures. The objective of this paper is to present detailed electron microscopy study about the structures of planar defects, such as stacking faults, twins, inversion domain walls that existed in 1D ZnO nanostructures. These planar defects are important for understanding the growth mechanism and relevant physical and possibly chemical properties of 1D ZnO nanostructures.     

Synthesis and characterization of the SnS nanowires via chemical vapor deposition

Single-crystal SnS nanowires have been successfully synthesized by catalysis-assistant chemical vapor deposition. Applying Au nanoparticles which were applied on the ITO surface as the catalysator, using SnS powder and S powder as precursors and the Ar+H₂ mixed atmosphere as the shielding and carrier gas, the SnS nanowires were obtained. X-ray diffraction (XRD), field-emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), X-ray photoelectron spectra (XPS) and Raman spectroscopy were employed to characterize the as-synthesized SnS nanostructures. The room-temperature photoluminescence properties of these as-prepared SnS nanowires were presented.     

Synthesis of aligned carbon nanotubes

Carbon nanomaterials seem to be most attractive because of their fascinating features. Carbon nanotubes emerged recently as unique nanostructures with remarkable mechanical and electronic properties. Future applications will require a fabrication method capable of producing uniform carbon nanotubes with well-defined and controllable reproducibility of their properties. In this review, recent results addressing rational and efficient methods to obtain aligned arrays of these one-dimensional carbon nanomaterials will be discussed. Received: 3 November 2000 / Accepted: 30 May 2001 / Published online: 30 August 2001     

AuPd纳米粒子作为催化剂制备硼纳米线及其场发射性质

利用化学气相沉积法,采用不同组分的金属合金纳米粒子AuPd作为催化剂,在Si(111)基底上成功制备大面积、高密度的硼纳米线薄膜.纳米线的平均长度约为10μm,直径在50—130 nm之间.结构分析表明,纳米线为单晶结构,硼纳米线的直径随着元素Pd在合金催化剂中比例的增加而减少.场发射特性测试结果表明,通过调整催化剂组分可以实现对硼纳米线的尺寸和密度的调控.     

Electronic transport properties of single-wall boron nanotubes

Electronic transport properties of single-wall boron nanotube(BNT) with different chiralities, diameters, some of which are encapsulated with silicon, germanium, and boron nanowires are theoretically studied. The results indicate that the zigzag(3, 3) BNT has more electronic transmission channels than the armchair(5, 0) BNT because of its unique structure distortion. Nanowires encapsulated in the BNT can enhance the conductance of the BNT to some extent by providing a significant electronic transmission channel to the BNT. The effect of the structure of nanowires and the diameter of BNTs on the transport properties has also been discussed. The results of this paper can enrich the knowledge of the electron transport of the BNT and provide theoretical guidance for subsequent experimental study.     

Ab initio modelling of boron and nitrogen in diamond nanowires

In this study an analysis is presented of the bonding and structural properties of dehydrogenated and hydrogenated doped cylindrical diamond nanowires calculated using the Vienna Ab Initio Simulation Package, employing density functional theory within the generalized-gradient approximation. The dopants studied here have been inserted substitutionally along the axis of an infinite one-dimensional diamond nanowire and include the single-electron acceptor boron and the single-electron donor nitrogen. The doped nanowires have then been re-relaxed, and properties compared with the undoped structures. The structural properties of relaxed nanowires considered here include an examination bonding via the electron charge density, with the aim of providing a better understanding of the effects of dopants on the stability of diamond nanostructures and nanodevices.     

Influence of DC arc current on the formation of cobalt-based nanostructures

The synthesis of cobalt-based magnetic nanostructures using DC arc discharge technique with varying arc current is reported here. The structural, morphological, compositional and magnetic properties of these nanostructures were studied as a function of applied arc current. Various techniques like X-ray diffraction, transmission electron microscopy, EDAX and vibrating sample magnetometry were used to carry out this study and the results are reported here. The results clearly indicate that for a given oxygen partial pressure, an arc current of 100 A favours the formation of unreacted cobalt atomic species. Also change in arc current leads to variation in phase, diversity in morphology etc. Other property changes such as thermal changes, mechanical changes etc. are not addressed here. The magnetic characterization further indicates that the anisotropy in shape plays a crucial role in deciding the magnetic properties of the nanostructured materials. We have quantified an interesting result in our experiment, that is, for a given partial pressure, 100 A arc current results in unique variation in structural and magnetic properties as compared to other arc currents.