Development of double cylindrical dielectric barrier discharge ion source

This paper deals with the dielectric barrier discharge (DBD) ion source composed of the outer cylindrical dielectric tube and the inner grounded metallic tube electrode. The sample gas is supplied through the inner ceramic tube. In this ion source, the DBD plasma is localized in the DBD tube so that the sample gases can be ionized just outside of the ceramic tube by the DBD excited helium gas without being exposed in the plasma jet. Besides, ambient air does not take part in the ionization of the sample vapor because ionization takes place inside the DBD ion source. Thus, this method is totally free from contaminants in ambient air. It was found that this ion source is capable of soft, high-sensitivity, and reproducible ionization. Application of this technique to the analysis of methamphetamine, carbaryl and basil leaf was given.     

介质阻挡放电离子源质谱分析

敞开式离子化质谱可对表面样品进行直接快速分析而受到关注,成为质谱分析的热点研究方向.介质阻挡放电离子源是一种基于等离子体放电机理的敞开式离子源,近年来得到了较快的发展.本文着重介绍该离子源的基本原理、性能特征以及应用进展,并对其发展趋势进行了展望.     

Comparison of dielectric barrier discharge, atmospheric pressure radiofrequency-driven glow discharge and direct analysis in real time sources for ambient mass spectrometry of acetaminophen

Three plasma-based ambient pressure ion sources were investigated; laboratory constructed dielectric barrier and rf glow discharges, as well as a commercial corona discharge (DART source). All were used to desorb and ionize a model analyte, providing sampling techniques for ambient mass spectrometry (MS). Experimental parameters were optimized to achive highest signal for acetaminophen as the analyte. Insight into the mechanisms of analyte desorption and ionization was obtained by means of emission spectrometry and ion current measurements. Desorption and ionization mechanisms for this analyte appear to be identical for all three plasma sources. Emission spectra differ only in the intensities of various lines and bands. Desorption of solid analyte requires transfer of thermal energy from the plasma source to sample surface, in the absence of which complete loss of MS response occurs. For acetaminophen, helium was the best plasma gas, providing 100- to 1000-fold higher analyte response than with argon or nitrogen. The same trend was also evident with background ions (protonated water clusters). MS analyte signal intensity correlates with the ion density (expressed as ion current) in the plasma plume and with emission intensity from excited state species in the plasma. These observations support an ionization process which occurs via proton transfer from protonated water clusters to analyte molecules.     

Intermediate detection in real time using reactive surface desorption dielectric‐barrier discharge ionization mass spectrometry

Reactive intermediates play key roles for reaction mechanism elucidation. A suitable tool for identifying the key intermediates is crucial and highly desirable. In this study, surface desorption dielectric‐barrier discharge ionization (reactive SDDBDI) was developed for characterization of the reactive intermediates. In reactive SDDBDI, the plasma is doped with a reagent before the plasma ions are directed at a cover slip surface bearing another analyte. Different from SDDBDI, reactive SDDBDI can be used both as an ambient ionization source and as a means to produce reagent ions for ambient ion/molecule reactions. The online derivation of 4‐aminophenol with trifluoroacetic anhydride demonstrated that reactive SDDBDI can be used for chemical analysis where improved specificity or sensitivity is required. The utility of this approach for real‐time detection of reactive intermediate was demonstrated by the Schiff‐base and Eberlin reactions. The formed intermediates and products could be readily detected and identified by tandem mass spectrometry. These results indicate that reactive SDDBDI can be used to generate reagent ions that undergo ion/molecule reactions in the open air with an analyte at condensed phase on a surface. Reactive SDDBDI has high‐efficiency ion transmission and high MS sensitivity. It is thus a potential tool to perform ambient ion/molecule reactions and detect reactive intermediates.     

Development of ambient sampling chemi/chemical ion source with dielectric barrier discharge

The development of a new configuration of chemical ionization (CI)‐based ion source is presented. The ambient air containing the gaseous sample is sniffed into an enclosed ionization chamber which is of sub‐ambient pressure, and is subsequently mixed with metastable species in front of the ion inlet of the mass spectrometer. Metastable helium atoms (He*) are used in this study as the primary ionizing agents and are generated from a dielectric barrier discharge (DBD) source. The DBD is powered by an AC high‐voltage supply and the configuration of the electrodes is in such a way that the generated plasma is confined within the discharge tube and is not extended into the ionization chamber. The construction of the ion source is simple, and volatile compounds released from the bulky sample can also be analyzed directly by approaching the sample to the sampling nozzle. When combined with heated nitrogen or other desorption methods, its application can also be extended to non‐volatile compounds, and the consumption for helium can be kept minimum solely for maintaining the stable discharge and gas phase ionization. Applications to non‐proximate sample analysis, direct determination of active ingredients in drug tablets and the detection of trace explosive such as hexamethylene triperoxide diamine are demonstrated. Copyright © 2010 John Wiley & Sons, Ltd.     

Comparison of Three Plasma Sources for Ambient Desorption/Ionization Mass Spectrometry

Plasma-based desorption/ionization sources are an important ionization technique for ambient surface analysis mass spectrometry. In this paper, we compare and contrast three competing plasma based desorption/ionization sources: a radio-frequency (rf) plasma needle, a dielectric barrier plasma jet, and a low-temperature plasma probe. The ambient composition of the three sources and their effectiveness at analyzing a range of pharmaceuticals and polymers were assessed. Results show that the background mass spectrum of each source was dominated by air species, with the rf needle producing a richer ion spectrum consisting mainly of ionized water clusters. It was also seen that each source produced different ion fragments of the analytes under investigation: this is thought to be due to different substrate heating, different ion transport mechanisms, and different electric field orientations. The rf needle was found to fragment the analytes least and as a result it was able to detect larger polymer ions than the other sources. Figure

?     

Spatially resolved spectroscopic measurements of a dielectric barrier discharge plasma jet applicable for soft ionization

An atmospheric pressure microplasma ionization source based on a dielectric barrier discharge with a helium plasma cone outside the electrode region has been developed for liquid chromatography/mass spectrometry and as ionization source for ion mobility spectrometry. It turned out that dielectric barrier discharge ionization could be regarded as a soft ionization technique characterized by only minor fragmentation similar to atmospheric pressure chemical ionization (APCI). Mainly protonated molecules were detected. In order to characterize the soft ionization mechanism spatially resolved optical emission spectrometry (OES) measurements were performed on plasma jets burning either in He or in Ar. Besides to spatial intensity distributions of noble gas spectral lines, in both cases a special attention was paid to lines of N₂⁺ and N₂. The obtained mapping of the plasma jet shows very different number density distributions of relevant excited species. In the case of helium plasma jet, strong N₂⁺ lines were observed. In contrast to that, the intensities of N₂ lines in Ar were below the present detection limit. The positions of N₂⁺ and N₂ distribution maxima in helium indicate the regions where the highest efficiency of the water ionization and the protonation process is expected.     

Impact of homogeneous and filamentary discharge modes on the efficiency of dielectric barrier discharge ionization mass spectrometry

The present study contributes to the evaluation of dielectric barrier discharge-based ambient ionization for mass spectrometric analysis (DBDI-MS) by providing a further step towards an understanding of underlying ionization processes. This examination highlights the effect of physical discharge modes on the ionization efficiency of the DBDI source. A distinction is made between the homogeneous and filamentary discharge mode due to different plasma gases in barrier configurations. Therefore, we first report on discharge modes of DBDI by demonstrating a universally applicable method to classify the predominant modes. Then, the ionization efficiency of these two modes is evaluated by a laser desorption-DBDI-MS with different molecular analytes. Here, the laser desorption is used to deliver neutral analytes which will be ionized by the plasma jet applied as dielectric barrier discharge ionization. With a clear increase of signal intensities in the homogeneous mode in contrast to the filamentary one, the present study indicates a pronounced dependence of the ionization efficiency on the discharge mode allowing further insight into the mechanisms of the ionization process.

Spectroscopic characterization of a microplasma used as ionization source for ion mobility spectrometry

We report a miniaturized excitation source for soft ionization of molecules based on a dielectric barrier discharge. An atmospheric plasma is established at the end of a 500 μm diameter capillary using He as buffer gas. The plasma jet which comes out of the capillary is dependent on the gas flow rate. The mechanism of the production of N₂⁺ outside the capillary, which is relevant for the protonation of molecules and sustains the production of primary ions, is investigated by spatially resolved spectroscopic measurements throughout the plasma. Possible application of such miniaturized plasmas is the ionization of gaseous compounds under atmospheric pressure as an alternative to traditional APCI (atmospheric pressure chemical ionization). The miniaturized plasma was applied as ionization source for ion mobility spectrometry where the common sources are radioactive, thus limiting the place of installation. First measurements of gaseous compounds with such a plasma ion mobility spectrometer with promising results showed detection limits comparable or even better than those obtained using common radioactive ionization sources.     

Desorption Mass Spectrometry for Nonvolatile Compounds Using an Ultrasonic Cutter

In this work, desorption of nonvolatile analytes induced by friction was studied. The nonvolatile compounds deposited on the perfluoroalkoxy substrate were gently touched by an ultrasonic cutter oscillating with a frequency of 40 kHz. The desorbed molecules were ionized by a dielectric barrier discharge (DBD) ion source. Efficient desorption of samples such as drugs, pharmaceuticals, amino acids, and explosives was observed. The limits of detection for these compounds were about 1 ng. Many compounds were detected in their protonated forms without undergoing significant fragmentation. When the DBD was off, no ions for the neutral samples could be detected, meaning that only desorption along with little ionization took place by the present technique.

一种用于高场非对称波形离子迁移谱系统的新型敞开式化学离子源

根据高场非对称波形离子迁移谱(FAIMS)系统的要求, 本文提出了一种新型敞开式直流电晕放电化学离子源. 该离子源主要由内线电极、外筒电极和牵引电极组成, 内、外电极半径分别是0.08、2 mm. 筒壁电极上开有对称的4个槽, 用于通入样品和牵引离子. 质谱实验结果表明, 该离子源能够在敞开环境下很好地离子化丙酮、乙醇、苯胺、N,N-二甲基甲酰胺、甲基磷酸二甲酯(DMMP)、乙酸乙酯、甲酸、乙酸、苯酚等正、负电性物质. 静电计测试实验结果说明该离子源能够稳定地产生离子电流. 通过分析不同时刻的谱图发现, 在不同时间点上产生的主要离子相同, 具有很好的稳定性. 利用感应耦合等离子体(ICP)工艺在硅片上加工了该离子源, 从而验证了该结构可以由微机电系统(MEMS)加工技术实现. 该离子源具有体积小、结构简单、无辐射、工作稳定等特点, 不仅可以满足FAIMS系统的要求, 还可用于敞开式质谱、微型质谱仪、离子迁移谱(IMS)等仪器.     

Dielectric barrier discharges in analytical chemistry

The present review reflects the importance of dielectric barrier discharges in analytical chemistry. Special about this discharge is-and in contrast to usual discharges with direct current-that the plasma is separated from one or two electrodes by a dielectric barrier. This gives rise to two main features of the dielectric barrier discharges; it can serve as dissociation and excitation device and as ionization mechanism, respectively. The article portrays the various application fields for dielectric barrier discharges in analytical chemistry, for example the use for elemental detection with optical spectrometry or as ionization source for mass spectrometry. Besides the introduction of different kinds of dielectric barrier discharges used for analytical chemistry from the literature, a clear and concise classification of dielectric barrier discharges into capacitively coupled discharges is provided followed by an overview about the characteristics of a dielectric barrier discharge concerning discharge properties and the ignition mechanism.     

Electrode‐assisted desorption electrospray ionization mass spectrometry

A new ion source has been developed for rapid, noncontact analysis of materials at ambient conditions. The method provides desorption of analytes under ambient conditions directly from different surfaces with little or no sample preparation. The new method, termed electrode‐assisted desorption electrospray ionization (EADESI), is on the basis of the ionization of molecules on different surfaces by highly charged droplets produced on a sharp‐edged high voltage tip, and ions produced are introduced into the mass spectrometer through a capillary. The EADESI technique can be applied to various samples including amino acids, peptides, proteins, drugs and human fluids such as urine and blood. EADESI is promising for routine analyses in different fields such as forensic, environmental and material sciences. EADESI interface can be fit to a conventional ion‐trap mass spectrometer. It can be used for various types of samples with a broad mass range. EADESI can also provide real‐time analysis which is very valuable for biomedical applications. Copyright © 2010 John Wiley & Sons, Ltd.     

Development of a graphite low‐temperature plasma source with dual‐mode in‐source fragmentation for ambient mass spectrometry

A new low‐temperature plasma (LTP), based on dielectric barrier discharge (DBD), has been developed as an alternative ionization source for ambient mass spectrometry. For organic samples, the source is able to produce two different fragmentation patterns which are selectable by an electrical switch. The two source modes are different only in the second electrodes: in configuration (A), bar‐plate and in configuration (B), coaxial bar–cylinder shapes are used. A disposable graphite probe is used as the first electrode, the same in both configurations, and a copper foil is used as the second electrode. The ionization source is applicable to gas and liquid samples, without any change being necessary in its design. Under optimal conditions, to take ethylbenzene as an example, a detection limit of less than 25 ng was obtained and a relative standard deviation (RSD) of 13.36% has been demonstrated for 50 ng of ethylbenzene (n = 11). We have found several interesting differences in the mass spectra of the tested volatile organic compounds (VOCs) in the two modes, which might be applicable in identification studies. We have investigated the effect of variation of the first electrode material and the second electrode length in mode B. Moreover, in this design the graphite electrode is capable of acting as a sample adsorbent, which is a new sampling method for LTP mass spectrometry (MS). This capability was investigated by adsorption of the selected VOCs onto the surface of the graphite electrode in a headspace solid‐phase microextraction (SPME) system, and direct desorption and ionization of the samples by LTPMS. Copyright © 2010 John Wiley & Sons, Ltd.     

Direct olive oil analysis by low‐temperature plasma (LTP) ambient ionization mass spectrometry

A fast, reagentless, and direct method is presented for the mass spectrometric analysis of olive oil without any sample pretreatment whatsoever. An ambient ionization technique, the low‐temperature plasma (LTP) probe, based on dielectric barrier discharge, is used to detect both minor and trace components (free fatty acids, phenolics and volatiles) in raw untreated olive oil. The method allows the measurement of free fatty acids (the main quality control parameter used to grade olive oil according to quality classes), selected bioactive phenolic compounds, and volatiles. The advantages and limitations of the direct analysis of extremely complex mixtures by the ambient ionization/tandem mass spectrometry combination are discussed and illustrated. The data presage the possible large‐scale application of direct mass spectrometric analysis methods in the characterization of olive oil and other foodstuffs. Copyright © 2009 John Wiley & Sons, Ltd.     

Rapid detection of drugs in biofluids using atmospheric pressure chemi/chemical ionization mass spectrometry

We have demonstrated that, with simple pH adjustment, volatile drugs such as methamphetamine, amphetamine, 3,4‐methylenedioxymethamphetamine (MDMA), ketamine, and valproic acid could be analyzed rapidly from raw biofluid samples (e.g. urine and serum) without dilution, or extraction, using atmospheric pressure ionization. The ion source was a variant type of atmospheric pressure chemical ionization (APCI) that used a dielectric barrier discharge (DBD) to generate the metastable helium gas and reagent ions. The sample solution was loaded in a disposable glass pipette, and the volatile compounds were purged by nitrogen gas to be reacted with the metastable helium gas. The electrodes of the DBD were arranged in such a way that the generated glow discharge was confined within the discharge tube and was not exposed to the analytes. A needle held at 100–500 V was placed between the ion‐sampling orifice and the discharge tube to guide the analyte ions into the mass spectrometer. After pH adjustment of the biofluid sample, the amphiphilic drugs were in the form of a water‐insoluble oil, which could be concentrated on the liquid surface. By gentle heating of the sample to increase the evaporation rate, rapid and sensitive detection of these drugs in raw urine and serum samples could be achieved in less than 2 min for each sample. Copyright © 2009 John Wiley & Sons, Ltd.     

常压敞开式质谱离子源发展趋势

近年来常压敞开式离子源凭借快速、原位、实时离子化样品等优势,被广泛应用于样品快速筛查、真伪鉴定、质谱成像等领域,已成为当今离子源的研究热点,受到了学术界及仪器制造、化学和生物分析等相关产业界的广泛关注。目前,该类离子源朝着克服基体效应、提高样品表面定位能力及增加离子传输距离等方向发展。本文主要介绍了可以很好解决上述问题并具有代表性的三种常压敞开式离子源:电喷雾萃取离子源(EESI)、介质阻挡放电离子源(DBDI)及空气动力辅助离子源(AFAI),重点涉及原理以及在此基础上所做的设计改进和应用进展。     

Plasma Treatment of Glass Surfaces Using Diffuse Coplanar Surface Barrier Discharge in Ambient Air

We report a study on the treatment of flat glass surfaces by ambient air atmospheric pressure plasma, generated by a dielectric barrier discharge of coplanar arrangement of the electrode system—the diffuse coplanar surface barrier discharge (DCSBD). The plasma treatment of glass was performed in both static and dynamic modes. With respect to wettability of the glass surface, treatment in static mode resulted in non-uniform surface properties, whereas dynamic mode provided a fully uniform treatment. A water contact angle measurement was used to determine the efficiency of plasma treatments in dynamic mode and also to investigate a hydrophobic recovery of plasma treated glass surfaces. The X-ray photoelectron spectroscopy measurements showed a decrease of overall carbon concentrations after plasma treatment. A deconvolution of C1s peak, showed that a short plasma treatment led to decrease of C–C bonds concentration and increases of C–O and O–C=O bond concentrations. An enhancing influence of the glass surface itself on DCSBD diffuse plasma was observed and explained by different discharge onsets and changes in the electric field distribution.     

基于新型介质阻挡放电离子源的药物快速检测方法研究

本研究将单电极放电技术的DBDI与质谱(MS)联用,快速检测了4种低极性的合成药物,结果表明,4种合成药物主要生成[M+H]+分子离子.此外还利用DBDI-MS对草乌、制草乌切片进行快速分析,在草乌中检测到乌头碱、中乌头碱、脱氧乌头碱的[M+H]+离子,以及[M+H-60]+碎片离子;在制草乌中只检测到乌头碱、中乌头碱、脱氧乌头碱的[M+H-60]+碎片离子.所测草乌中的标志性药效成分主要为双酯类生物碱,制草乌中的标志性药效成分主要为单酯类生物碱.新型DBDI为药物研究提供了一种新的、快速检测方法,具有十分重要的理论和实际应用意义,在药物研究领域具有极大的应用潜力.     

A cylindrical capacitor ionization source: droplet generation and controlled charge reduction for mass spectrometry

A cylindrical capacitor ionization source was used in conjunction with corona discharge charge reduction for generation of singly charged ions for mass spectrometric analysis. The source consists of a fused-silica capillary threaded with a platinum wire and placed inside a stainless steel tube. Application of an electric potential to the wire results in the production of a linear stream of charged droplets when an aqueous solution is pumped through the capillary. Subsequent solvent evaporation yields ions, providing a continuous ion source for mass spectrometry. Passage of the ions through a corona discharge charge reduction chamber permits reduction of the charge state to predominantly singly charged species, facilitating analysis of DNA and protein mixtures. The change from production of multiply charged ions to production of singly charged ions is extremely simple, requiring only modulation of the voltage applied to the corona discharge electrode. A simple technique for construction of the ionization source is reported.