Reactivity of [Re2(CO)8(MeCN)2] with thiazoles: Hydrido bridged dirhenium compounds bearing thiazoles in different coordination modes

Reactions of the labile compound [Re₂(CO)₈(MeCN)₂] with thiazole and 4-methylthiazole in refluxing benzene afforded the new compounds [Re₂(CO)₇{μ-2,3-η²-C₃H(R)NS}{η¹-NC₃H₂(4-R)S}(μ-H)] (1, R = H; 2, R = CH₃), [Re₂(CO)₆{μ-2,3-η²-C₃H(R)NS}{η¹-NC₃H₂(4-R)S}₂(μ-H)] (3, R = H; 4, R = CH₃) and fac-[Re(CO)₃(Cl){η¹-NC₃H₂(4-R)S}₂] (5, R = H; 6, R = CH₃). Compounds 1 and 2 contain two rhenium atoms, one bridging thiazolide ligand, coordinated through the C(2) and N atoms and a η¹-thiazole ligand coordinated through the nitrogen atom to the same Re as the thiazolide nitrogen. Compounds 3 and 4 contain a Re₂(CO)₆ group with one bridging thiazolide ligand coordinated through the C(2) and N atoms and two N-coordinated η¹-thiazole ligands, each coordinated to one Re atom. A hydride ligand, formed by oxidative-addition of C(2)-H bond of the ligand, bridges Re-Re bond opposite the thiazolide ligand in compounds 1-4. Compound 5 contains a single rhenium atom with three carbonyl ligands, two N-coordinated η¹-thiazole ligands and a terminal Cl ligand. Treatment of both 1 and 2 with 5 equiv. of thiazole and 4-methylthiazole in the presence of Me₃NO in refluxing benzene afforded 3 and 4, respectively. Further activation of the coordinated η¹-thiazole ligands in 1-4 is, however, unsuccessful and results only nonspecific decomposition. The single-crystal XRD structures of 1-5 are reported.     

Reaction of 3,3′,4,4′-tetramethyl-1,1′-diphosphaferrocene with [Re2(CO)8(CH3CN)2]: Novel coordination modes of the 1,1′-diphosphaferrocene ligand

Reaction of 3,3′,4,4′-tetramethyl-1,1′-diphosphaferrocene (1) with [Re₂(CO)₈(CH₃CN)₂] afforded two trimetallic complexes in which the heterometallocene is ligated across the Re-Re bond. The structure of the complex having 1 bridging the Re₂(CO)₈ moiety through two P atoms was determined by X-ray diffraction and compared with those of analogous complexes with organic bridging bis-phosphines. The second complex obtained in this reaction presumably contains 1 acting as a (P,Fe) bridging ligand.     

Synthesis and crystal structure of the double cluster [Cp3Fe4(CO)4(C5H4)]2(p-C6H4)

[Cp₄Fe₄(CO)₄] (1) reacts with p-BrC₆H₄Li and MeOH in sequence to afford the functionalized cluster [Cp₃Fe₄(CO)₄(C₅H₄-p-C₆H₄Br)] (2), while the reaction of 2 with n-BuLi and MeOH produces [Cp₂Fe₄(CO)₄(C₅H₄Bu)(C₅H₄-p-C₆H₄Br)] (3). The double cluster [Cp₃Fe₄(CO)₄(C₅H₄)]₂(p-C₆H₄) (4) has been prepared by treatment of [Cp₄Fe₄(CO)₄] with p-C₆H₄Li₂ and MeOH in sequence. The electrochemistry of 2 and 4, as well as the crystal structure of 4 have been investigated.     

Reactions of Mo(II)-tetraphosphine complex [MoCl2{meso-o-C6H4(PPhCH2CH2PPh2)2}] with a series of small molecules

Reactions of Mo(II)-tetraphosphine complex [MoCl₂(κ⁴-P4)] (2; P4 = meso-o-C₆H₄(PPhCH₂CH₂PPh₂)₂) with a series of small molecules have been investigated. Thus, treatment of 2 with alkynes RCCR′ (R = Ph, R′ = H; R = p-tolyl, R′ = H; R = Me, R′ = Ph) in benzene or toluene gave neutral mono(alkyne) complexes [MoCl₂(RCCR′)(κ³-P4)] containing tridentate P4 ligand, which were converted to cationic complexes [MoCl(RCCR′)(κ⁴-P4)]Cl having tetradentate P4 ligand upon dissolution into CDCl₃ or CD₂Cl₂. The latter complexes were available directly from the reactions of 2 with the alkynes in CH₂Cl₂. On the other hand, treatment of 2 with 1 equiv. of XyNC (Xy = 2,6-Me₂C₆H₃) afforded a seven-coordinate mono(isocyanide) complex [MoCl₂(XyNC)(κ⁴-P4)] (7), which reacted further with XyNC to give a cationic bis(isocyanide) complex [MoCl(XyNC)₂(κ⁴-P4)]Cl (8). From the reaction of 2 with CO, a mono(carbonyl) complex [MoCl₂(CO)(κ⁴-P4)] (9) was obtained as a sole isolable product. Reaction of 9 with XyNC afforded [MoCl(CO)(XyNC)(κ⁴-P4)]Cl (10a) having a pentagonal-bipyramidal geometry with axial CO and XyNC ligands, whereas that of 7 with CO resulted in the formation of a mixture of 10a and its isomer 10b containing axial CO and Cl ligands. Structures of 7 and 9 as well as [MoCl(XyNC)₂(κ⁴-P4)][PF₆](8′) and [MoCl(CO)(XyNC)(κ⁴-P4)][PF₆] (10a′) derived by the anion metathesis from 8 and 10a, respectively, were determined in detail by the X-ray crystallography.     

Synthesis and characterisation of six Fe(II or III), Co(II) or Zr(IV) complexes containing the ligand [CH(SiMe2R)P(Ph)2NSiMe3] (R = Me, NEt2) and of [Co{N(SiMe3)C(Ph)C(H)P(Ph)2NSiMe3}2]

The C,N-(trimethylsilyliminodiphenylphosphoranyl)silylmethylmetal complexes [Fe(L)₂] (3), [Co(L)₂] (4), [ZrCl₃(L)]·0.83CH₂Cl₂ (5), [Fe(L)₃] (6), [Fe(L′)₂] (7) and [Co(L′)₂] (8) have been prepared from the lithium compound Li[CH(SiMe₂R)P(Ph)₂NSiMe₃] [1a, (R = Me) {≡ Li(L)}; 1b, (R = NEt₂) {≡ Li(L′)}] and the appropriate metal chloride (or for 7, FeCl₃). From Li[N(SiMe₃)C(Ph)C(H)P(Ph)₂NSiMe₃] [≡ Li(L″)] (2), prepared in situ from Li(L) (1a) and PhCN, and CoCl₂ there was obtained bis(3-trimethylsilylimino- diphenylphosphoranyl-2-phenyl-N-trimethylsilyl-1-azaallyl-N,N′)cobalt(II) (9). These crystalline complexes 3-9 were characterised by their mass spectra, microanalyses, high spin magnetic moments (not 5) and for 5 multinuclear NMR solution spectra. The X-ray structure of 3 showed it to be a pseudotetrahedral bis(chelate), the iron atom at the spiro junction.     

Synthetic, X-ray structural and protonation studies of CpCr(CO)2SPy and CpCr(CO)2SPym (SPy = C5H4NS, SPym = C4H3N2S)

The facile reaction of [CpCr(CO)₃]₂ (Cp = η⁵-C₅H₅) (1) with one mole equivalent of 2,2′-dithiodipyridine ((C₅H₄NS)₂(SPy)₂) at ambient temperature led to the isolation of dark brown crystalline solids of CpCr(CO)₂(η²-SPy) (2) in ca. 72% yield. 2 undergoes quantitative conversion to CpCrCl₂(η¹-SPyH) (3) with HCl. The reaction 1 with one mole equivalent of 2-mercaptopyrimidine (C₄H₃N₂SHHSPym) at ambient temperature led to the isolation of reddish-brown crystalline solids of CpCr(CO)₂(η²-SPym) (4) and green solids of CpCr(CO)₃H (5) in yields of ca. 42% and 46%, respectively. Reaction of 4 with HCl and subsequent workup in acetonitrile resulted in the cleavage of the thiolate ligand, giving the 15-electron chromium(III) species CpCrCl₂(CH₃CN) (6) and free 2-mercaptopyrimidine. The complexes 2-4 have been determined by single X-ray diffraction analysis.     

Syntheses of platinum(II) complexes of cyclo-octenyl group and isolation of a self-assembled oxo-bridged macrocyclic complex [Pt4(Spy)4(C8H12-O-C8H12)2]

Reactions of [Pt₂(μ-Cl)₂(C₈H₁₂OMe)₂] (1) (C₈H₁₂OMe = 8-methoxy-cyclooct-4-ene-1-yl) with various anionic chalcogenolate ligands have been investigated. The reaction of 1 with Pb(Spy)₂ (HSpy = pyridine-2-thiol) yielded a binuclear complex [Pt₂(Spy)₂(C₈H₁₂OMe)₂] (2). A trinuclear complex [Pt₃(Spy)₄(C₈H₁₂OMe)₂] (3) was isolated by a reaction between 2 and [Pt(Spy)₂]_n. The reaction of 1 with HSpy in the presence of NaOMe generated 2 and its demethylated oxo-bridged tetranuclear complex [Pt₄(Spy)₄(C₈H₁₂-O-C₈H₁₂)₂] (4). Treatment of 1 with ammonium diisopropyldithiophosphate completely replaced C₈H₁₂OMe resulting in [Pt(S₂P{OPrⁱ}₂)₂] (5), whereas non-rigid 5-membered chelating ligand, Me₂NCH₂CH₂E⁻, produced mononuclear complexes [Pt(ECH₂CH₂NMe₂)(C₈H₁₂OMe)] (E = S (6), Se (7)). These complexes have been characterized by elemental analyses, NMR (¹H, ¹³C{¹H}, ¹⁹⁵Pt{¹H}) and absorption spectroscopy. Molecular structures of 2, 3, 4, 5 and 7 were established by single crystal X-ray diffraction analyses. Thermolysis of 2, 6 and 7 in HDA gave platinum nanoparticles.     

The influence of organic agents on the resultant crystal structure in the reactions of the [Re4Te4(CN)12] tetrahedral cluster anion with Nd cations

The reaction of the cluster salt K₄[Re₄Te₄(CN)₁₂]·5H₂O with NdCl₃·6H₂O was studied in either an acidic medium (HCl) or in a water solution in the presence of the following organic agents: hexafluoroacetylacetonate, 2,2′-bipyridine or 1,10-phenanthroline (phen). The crystal structures of four new compounds have been solved by single crystal X-ray diffraction analysis: (H)[{Nd(H₂O)₅}{Re₄Te₄(CN)₁₂}]·5.5H₂O (1) (space group P2₁/c, framework structure), K₂[{Nd(H₂O)₇}₂{Re₄Te₄(CN)₁₂}₂]·8H₂O (2) (space group С2/c, isolated structure), K_0.5H_0.5[{Nd(H₂O)₅}{Re₄Te₄(CN)₁₂}]·3H₂O (3) (space group Сmcm, layered structure) and (phenH)[{Nd(H₂O)₂(phen)₂}{Re₄Te₄(CN)₁₂}]·11H₂O (4) (space group С2/c, chain structure). 1,10-Phenanthroline was found to have been incorporated into the structure of compound 4, whilst hexafluoroacetylacetonate and 2,2′-bipyridine did not enter the structures of 2 and 3. It was shown that the structures of compounds 2-4 differ dramatically from that found for compound 1, which was obtained in the absence of the organic agents.     

A family of three-dimensional porous coordination polymers with general formula (Kat)2[{M(H2O)n}3{Re6Q8(CN)6}2]·xH2O (Q=S, Se; n=1.5, 2)

The X-ray crystal structures of a series of new compounds (H₃O)₂[{Mn(H₂O)_1.5}₃{Re₆Se₈(CN)₆}₂]·19H₂O (1), (Me₄N)₂[{Co(H₂O)_1.5}₃{Re₆S₈(CN)₆}₂]·13H₂O (2), (Me₄N)₂[{Co(H₂O)_1.5}₃{Re₆Se₈(CN)₆}₂]·3H₂O (3), (Et₄N)₂[{Mn(H₂O)₂}₃{Re₆Se₈(CN)₆}₂]·6.5H₂O (4), (Et₄N)₂[{Ni(H₂O)₂}₃{Re₆S₈(CN)₆}₂]·6.5H₂O (5), and (Et₄N)₂[{Co(H₂O)₂}₃{Re₆S₈(CN)₆}₂]·10H₂O (6) are reported. All six compounds are isostructural crystallizing in cubic space group with four formulae per unit cell. For compounds 1, 3-5 the following parameters were found: (1) a=19.857(2) Å, R1=0.0283; (3 at 150 K) a=19.634(1) Å, R1=0.0572; (4) a=20.060(2) Å, R1=0.0288; (5) a=19.697(2) Å, R1=0.0224. The structures consist three-dimensional cyano-bridged framework formed by cyano cluster anions [Re₆Q₈(CN)₆]⁴⁻, Q=S, Se and transition metal cations, M²⁺=Mn²⁺, Co²⁺, Ni²⁺. Water molecules and large organic cations Me₄N⁺ and Et₄N⁺ are included in cavities of this framework. Porosity of the framework, its ability to accommodate different cations and water molecules by little changes in the structure, as well as distortion of coordination framework under loss of water of crystallization is discussed.     

Solvothermal synthesis and characterisation of new one-dimensional indium and gallium sulphides: [C10N4H26]0.5[InS2] and [C10N4H26]0.5[GaS2]

Two new main group metal sulphides, [C₁₀N₄H₂₆]_0.5[InS₂] (1) and [C₁₀N₄H₂₆]_0.5[GaS₂] (2) have been prepared solvothermally in the presence of 1,4-bis(3-aminopropyl)piperazine and their crystal structures determined by single-crystal X-ray diffraction. Both compounds are isostructural and crystallise in the monoclinic space group P2₁/n (Z=4), with a=6.5628(5), b=11.2008(9), c=12.6611(9) Å and β=94.410(4)° (wR=0.035) for compound (1) and a=6.1094(5), b=11.2469(9), c=12.7064(10) Å and β=94.313(4)° (wR=0.021) for compound (2). The structure of [C₁₀N₄H₂₆]_0.5[MS₂] (M=In,Ga) consists of one-dimensional [MS₂]⁻ chains which run parallel to the crystallographic a axis and are separated by diprotonated amine molecules. These materials represent the first example of solvothermally prepared one-dimensional gallium and indium sulphides.     

Preparation and structural characterization of [RuCl2(CO)2{Te(CH2SiMe3)2}2] and [RuCl2(CO){Te(CH2SiMe3)2}3]

The objective of the present work was to synthesize mononuclear ruthenium complex [RuCl₂(CO)₂{Te(CH₂SiMe₃)₂}₂] (1) by the reaction of Te(CH₂SiMe₃)₂ and [RuCl₂(CO)₃]₂. However, the stoichiometric reaction affords a mixture of 1 and [RuCl₂(CO){Te(CH₂SiMe₃)₂}₃] (2). The X-ray structures show the formation of the cis(Cl), cis(C), trans(Te) isomer of 1 and the cis(Cl), mer(Te) isomer of 2. The ¹²⁵Te NMR spectra of the complexes are reported. The complex distribution depends on the initial molar ratio of the reactants. With an excess of [RuCl₂(CO)₃]₂ only 1 is formed. In addition to the stoichiometric reaction, a mixture of 1 and 2 is observed even when using an excess of Te(CH₂SiMe₃)₂. Complex 1 is, however, always the main product. In these cases the ¹²⁵Te NMR spectra of the reaction solution also indicates the presence of unreacted ligand.     

Combinatorial topology of uranyl molybdate sheets: syntheses and crystal structures of (C6H14N2)3[(UO2)5(MoO4)8](H2O)4 and (C2H10N2)[(UO2)(MoO4)2]

Two new mixed organic-inorganic uranyl molybdates, (C₆H₁₄N₂)₃[(UO₂)₅(MoO₄)₈](H₂O)₄ (1) and (C₂H₁₀N₂)[(UO₂)(MoO₄)₂] (2), have been obtained by hydrothermal methods. The structure of 1 [triclinic, , Z=1, a=11.8557(9), b=11.8702(9), c=12.6746(9) Å, α=96.734(2)°, β=91.107(2)°, γ=110.193(2)°, V=1659.1(2) Å] has been solved by direct methods and refined on the basis of F² for all unique reflections to R1=0.058, which was calculated for the 5642 unique observed reflections (|F_o|?4σ_F). The structure contains topologically novel sheets of uranyl square bipyramids, uranyl pentagonal bipyramids, and MoO₄ tetrahedra, with composition [(UO₂)₅(MoO₄)₈]⁶⁻, that are parallel to (−101). H₂O groups and 1,4-diazabicyclo [2.2.2]-octane (DABCO) molecules are located in the interlayer, where they provide linkage of the sheets. The structure of 2 [triclinic, , Z=2, a=8.4004(4), b=11.2600(5), c=13.1239(6) Å, α=86.112(1)°, β=86.434(1)°, γ=76.544(1)°, V=1203.14(10) Å] has been solved by direct methods and refined on the basis of F² for all unique reflections to R1=0.043, which was calculated for 5491 unique observed reflections (|F_o|?4σ_F). The structure contains topologically novel sheets of uranyl pentagonal bipyramids and MoO₄ tetrahedra, with composition [(UO₂)(MoO₄)₂]²⁻, that are parallel to (110). Ethylenediamine molecules are located in the interlayer, where they provide linkage of the sheets. All known topologies of uranyl molybdate sheets of corner-sharing U and Mo polyhedra can be described by their nodal representations (representations as graphs in which U and Mo polyhedra are given as black and white vertices, respectively). Each topology can be derived from a simple black-and-white graph of six-connected black vertices and three-connected white vertices by deleting some of its segments and white vertices.     

Syntheses, crystal structures and DFT studies of [Me3EM(CO)5] (E = Sb, Bi; M = Cr, W), cis-[(Me3Sb)2Mo(CO)4], and [Bu3BiFe(CO)4]

Syntheses of [Me₃SbM(CO)₅] [M = Cr (1), W (2)], [Me₃BiM(CO)₅] [M = Cr (3), W (4)], cis-[(Me₃Sb)₂Mo(CO)₄] (5), [^tBu₃BiFe(CO)₄] (6), crystal structures of 1-6 and DFT studies of 1-4 are reported.     

ESR and pH-potentiometric study of the mixed-ligand complex formation in the copper(II)-4-fluorosalicylic acid-N,N-diethylnicotinamide system: Structure and spectral properties of [Cu(4-fluorosalicylate)2(N,N-diethylnicotinamide)2(H2O)2] complex

EPR simulation method together with pH-potentiometry combined with UV-Vis spectrophotometry were used for the study of the ternary system 4-fuorosalicylic acid (HA)-N,N-diethylnicotinamide (B)-copper(II) in aqueous solution. The N,N-diethylnicotinamide ligand is a weak donor, its mixed-ligand complexes with 4-fluorosalicylate anions are more favoured. The number of coordinated N,N-diethylnicotinamide molecules increases with decreasing temperature: up to four ones were detected in the coordination sphere of copper(II) in frozen solutions. The formation of [CuH₋₁AB₂] and [CuH₋₁A] was detected by all methods at neutral pH. At lower pH values, [CuA₂B₂] and [CuB] become dominant, and this fact is in good agreement with [CuA₂B₂(H₂O)₂] crystals obtained from similar solutions. The structural unit of the [CuA₂B₂(H₂O)₂] complex consists of a copper(II) ion, which is monodentately coordinated by a pair of 4-fluorosalicylate anions and by a pair of N,N-diethylnicotinamide in trans positions in the basal plane, and by two water molecules in the axial positions of a tetragonal bipyramid.     

Evaluation of two chelators for labelling a PNA monomer with the fac-[Tc(CO)3] moiety

A PNA monomer containing thymine as nucleobase (1) was synthesized, characterized and coupled to the pyrazolyl containing ligand 3,5-Me₂pz(CH₂)₂N((CH₂)₃COOH)(CH₂)₂NHBoc (2) and to a modified cysteine S-(carboxymethyl-pentafluorphenyl)-N-[(trifluor)carbonyl]-l-cysteine methyl ester (3) yielding the bifunctional chelators 6 and 7, respectively. Reactions of 6 and 7 with the Re(I) tricarbonyl starting material [Re(CO)₃(H₂O)₃]Br afforded the complexes fac-[Re(CO)₃(κ³-6)]⁺ (8) and fac-[Re(CO)₃(κ³-7)] (9), respectively. The identity of 8 and 9 has been established based on IR spectroscopy, elemental analysis, ESI-MS spectrometry and HPLC. The multinuclear NMR spectroscopy (¹H, ¹³C, g-COSY, g-HSQC) has also been very informative in the case of complex 8, showing the presence of rotamers in solution. For 9 the NMR spectrum was too complex due to the presence of rotamers and diastereoisomers. The radioactive congeners of complexes 8 and 9, fac-[^99mTc(CO)₃(κ³-6)]⁺ (8a) and fac-[^99mTc(CO)³(κ³-7)] (9a), have been prepared by reacting the precursor fac-[^99mTc(CO)₃(H₂O)₃]⁺ with the corresponding ligands being their identity established by comparing their HPLC chromatograms with the HPLC of the rhenium surrogates.     

Synthesis and reactivity of [ReBr2(NCCH3)2(CO)2]: A new precursor for bioorganometallic chemistry

We have synthesised (Et₄N)[ReBr₂(NCCH₃)₂(CO)₂] 1 in two steps from [ReBr₃(CO)₃]²⁻. Complex 1 is water and air stable and the two Br⁻ ligands are easily exchanged for coordinating solvent molecules such as water. The reactivity of 1 with several ligands such as imidazole (imz) and 2-picolinic acid (2-pic) are easily possible with substitution exclusively occurring in trans-position to the carbonyl groups. The resulting complexes [Re(imz)₂(NCCH₃)₂(CO)₂]⁺ and [Re(2-pic)(NCCH₃)₂(CO)₂] have been isolated and structurally characterised. The two acetonitrile ligands are strongly bound and are not substituted under any conditions. Complex 1 represents therefore the new moiety “trans,cis-[Re(NCCH₃)₂(CO)₂]⁺” which can be considered as a further building block in organometallic chemistry.     

Novel octahedral nickel(II) dithiocarbamates with bi- or tetradentate N-donor ligands: X-ray structures of [Ni(Bzppzdtc)(phen)2]ClO4 · CHCl3 and [Ni(Bz2dtc)2(cyclam)]

A series of novel octahedral nickel(II) dithiocarbamate complexes involving bidentate nitrogen-donor ligands (phen = 1,10-phenanthroline, bpy = 2,2′-bipyridine) or a tetradentate ligand (cyclam = 1,4,8,11-tetraazacycloteradecane) of the composition [Ni(BzMetdtc)(phen)₂]ClO₄ (1), [Ni(Pe₂dtc)(phen)₂]ClO₄ (2), [Ni(Bzppzdtc)(phen)₂]ClO₄ · CHCl₃ (3), [Ni(Bzppzdtc)(phen)₂](SCN) (4), [Ni(BzMetdtc)(bpy)₂]ClO₄ · 2H₂O (5), [Ni(Pe₂dtc)(cyclam)]ClO₄ (6), [Ni(BzMetdtc)₂(cyclam)] (7), [Ni(Bz₂dtc)₂(cyclam)] (8) and [Ni(Bz₂dtc)₂(phen)] (9) (BzMetdtc = N,N-benzyl-methyldithiocarbamate(1-) anion, Pe₂dtc = N,N-dipentyldithiocarbamate(1-) anion, Bz₂dtc = N,N-dibenzyldithiocarbamate(1-) anion, Bzppzdtc = 4-benzylpiperazinedithiocarbamate(1-) anion), have been synthesized. Spectroscopic (electronic and infrared), magnetic moment and molar conductivity data, and thermal behaviour of the complexes are discussed. Single crystal X-ray analysis of 3 and 8 confirmed a distorted octahedral arrangement in the vicinity of the nickel atom with a N₄S₂ donor set. They represent the first X-ray structures of such type complexes. The catalytic influence of complexes 2, 3, 6, and 7 on graphite oxidation was studied and discussed.     

Synthesis and structure of [C6N4H20]0.5[B5O6(OH)4]: A new organically templated pentaborate with white-light-emission

A new organically templated pentaborate [C₆N₄H₂₀]_0.5[B₅O₆(OH)₄] (1a) was prepared by reactions of triethylenetetramine (TETA) with excess boric acid in aqueous solution and characterized by elemental analysis, FTIR, TG-DTA, powder X-ray diffraction and photoluminescence spectroscopy. The structure of 1a was determined by a single-crystal X-ray diffraction. It crystallizes in the monoclinic system with space group P2(1)/c, a=9200(3) Å, b=14.121(5) Å, c=10.330(4) Å, β=91.512(4)°, V=1341.4(9) Å³, and Z=4. The luminescent properties of the compound were studied, and a green-blue luminescence occurs with an emission maximum at 507 nm upon excitation at 430 nm. The photoluminescence of 1a can be modified from green-blue to white by means of a simple heat-treatment process. The white-light-emission of sample 1c makes the pentaborate a good candidate for display and lighting applications in the white LED.     

A ferrocenyl-bridged intramolecularly coordinated bis(diorganostannylene): Synthesis, molecular structure and reactivity of [4-t-Bu-2,6-{P(O)(O-i-Pr)2C6H2Sn}C5H4]2Fe

The intramolecularly coordinated heteroleptic stannylene [4-t-Bu-2,6-{P(O)(O-i-Pr)₂}₂C₆H₂]SnCl serves as synthon for the synthesis of the ferrocenyl-bridged bis(diorganostannylene) [4-t-Bu-2,6-{P(O)(O-i-Pr)₂}₂C₆H₂SnC₅H₄]₂Fe (1) which in turn reacts with W(CO)₆ and Cr(CO)₄(C₇H₈) to provide the corresponding transition metal complexes [4-t-Bu-2,6-{P(O)(O-i-Pr)₂}₂C₆H₂Sn{W(CO)₅}C₅H₄]₂Fe (2) and [4-t-Bu-2,6-{P(O)(O-i-Pr)₂}₂C₆H₂SnC₅H₄]₂Fe · Cr(CO)₄ (3), respectively. Reaction of compound 1 with sulphur and atmospheric moisture gave, under partial tin-carbon and oxygen-carbon bond cleavage, a tetranuclear organotin-oxothio cluster 5. All compounds were characterized by ¹H, ¹³C, ³¹P, and ¹¹⁹Sn NMR, and IR spectroscopy, as well as by single-crystal X-ray diffraction analysis. Compounds 1 and 3 were also investigated by Mössbauer spectroscopy. Cyclovoltametric studies reveal the influence of the organostannyl moieties on the redox-behaviour of compounds 1-3 in comparison with unsubstituted ferrocene.     

Synthesis of [Ru(CO)2(PPh3)(SP)] and [Ru(CO)(PPh3)2(SP)] and their catalytic activities for the hydroamination of phenylacetylene

The reaction of [Ru(CO)₂(PPh₃)₃] (1) with o-styryldiphenylphophine (SP) (2) gave [Ru(CO)₂(PPh₃)(SP)] (3) in 83% yield. This styrylphosphine ruthenium complex 3 can also be synthesized by the reaction of [Ru(p-MeOC₆H₄NN)(CO)₂(PPh₃)₂]BF₄ (4) with NaBH₄ and 2 in 50% yield. When “Ru(CO)(PPh₃)₃” generated by the reaction of [RuH₂(CO)(PPh₃)₃] (8) with trimethylvinylsilane reacted with 2, [Ru(CO)(PPh₃)₂(SP)] (10) was produced in moderate yield as an air sensitive solid. The spectral and X-ray data of these complexes revealed that the coordination geometries around the ruthenium center of both complexes corresponded to a distorted trigonal bipyramid with the olefin occupying the equatorial position and the C-C bonding in the olefin moiety in 3 and 10 contained a significant contribution from a ruthenacyclopropane limiting structure. Complexes 3 and 10 showed catalytic activity for the hydroamination of phenylacetylene 11 with aniline 12. Ruthenium complex 3 in the co-presence of NH₄PF₆ or H₃PW₁₂O₄₀ proves to be a superior catalyst system for this hydroamination reaction. In the case of the reaction using H₃PW₁₂O₄₀ as an additive, ketimines (13) was obtained in 99% yield at a ruthenium-catalyst loading of 0.1 mol%. Some aniline derivatives such as 4-methoxy, 4-trifluoromethyl-, and 4-bromoanilines can also be used in this hydroamination reaction.