Aqueous polymerization of acrylamide

The polymerization of acrylamide (I) initiated by a potassium bromate—thioglycollic acid (TGA) redox pair has been studied in aqueous media at 30°C in a nitrogen atmosphere. The reaction order related to the catalyst concentration (KBrO₃) was 0.501, which indicated a bimolecular mechanism for the termination reaction in the range of 1.0?3.0 × 10^?3 mole/liter. The polymerization rate varied linearly with monomer (I) concentration over the range of 1.0?5.0 × 10^?2 mole/liter. A typical behavior is observed, however, by changing the thioglycollic acid concentration. The initial rate of polymerization (Ri), as well as the maximum conversion, increases by increasing the temperature to 30°C, but the initial rate and the maximum conversion falls as the temperature rises above 30°C. The overall energy of activation is 6.218 kcal in the temperature range of 20–40°C. Water-miscible organic solvents, namely, CH₃OH and C₂H₅OH, depress the rate of polymerization.     

Aqueous polymerization of acrylamide initiated by acidic potassium permanganate–ascorbic acid redox system

The polymerization of acrylamide initiated by the acidic permanganate–ascorbic acid redox pair has been studied in aqueous media at 30 ± 0.2°C in nitrogen atmosphere. The initial rate of polymerization has been found to be proportional to nearly the first power of the catalyst KMnO₄ concentration within the range 6.0 × 10^?3–14.0 × 10^?3 mole/l. The rate is proportional to the first power of the monomer concentration within the range 4.00 × 10^?2–12.0 × 10^?2 mole/l. However, the rate of polymerization is independent of ascorbic acid concentration within the range 3.0 × 10^?3–6.0 × 10^?3 mole/l., but the further increase of the concentration depresses the rate of polymerization as well as maximum conversion. The initial rate increases but the maximum conversion decreases as the temperature is increased within the range 20–35°C. The overall energy of activation has been found to be 9.8 kcal/mole. The optimum amount of sulfuric acid is essential to initiate the polymerization but its presence in excess produces no effect either on the rate of reaction or the maximum conversion. Water-miscible organic solvents and salts, e.g., CH₃OH, C₂H₅OH, (CH₃)₂CHOH, KCl, and Na₂SO₄, depress the rate. Slight amounts of MnSO₄ · H₂O and a complexing agent NaF increase the rate of polymerization. Cationic and anionic detergents have been found to decrease and increase the rate, respectively, while nonionic surfactants have no effect on the rate of polymerization.     

Aqueous Polymerization of Methyl Methacrylate Initiated by Potassium Peroxydisulfate-Ascorbic Acid Redox System

The aqueous polymerization of methyl methacrylate initiated by the redox system K₂S₂O₈-ascorbic acid has been studied at 35°C under the influence of oxygen. The rate of polymerization increases with increasing ascorbic acid concentration at low activator concentration, remains constant within the range 4.375 × 10^?3 to 11.25 × 10^?3 mole/liter, and at higher ascorbic acid concentration again decreases. The rate varies linearly with monomer concentration. The initial rate and the limiting conversion increase with increasing polymerization temperature. Organic solvents (water-miscible only) and small amounts of neutral salts like KC1 and Na₂SO₄ depress the initial rate and the maximum conversion. The addition of small amounts of salts like Cu²⁺ and Mn²⁺ increases the initial rate, but no appreciable increase in the limiting conversion is observed.     

Polymerization of Acrylamide with Permanganate/Mercaptosuccinic Acid Initiator System

The aqueous polymerization of acrylamide initiated by the acidified potassium permanganate/mercaptosuccinic acid redox system was studied at 35 ± 0.2°C in nitrogen. In the studied range of activator concentration (2.0 × 10^?3 to 6.25 ± 10^?3 mole/liter) the polymerization rate remains unaffected. The initial rate of polymerization varies linearly with KMnO₄ and acrylamide concentrations in the studied range. The activation energy was found to be 6.61 kcal/mole (27.63 kJ/mole) in the temperature range of 30–50°C. The molecular weight of polyacrylamide was found to be independent of [KMnO₄] but increased with increasing monomer concentration. The effect of DMF on polymerization rate and molecular weight was also investigated.     

Aqueous polymerization of acrylonitrile by ascorbic acid–peroxodisulfate redox system

The polymerization of acrylonitrile initiated by an ascorbic acid–peroxodisulfate redox system was studied in an aqueous solution at 35°C in the presence of air. Molecular oxygen was found to have no effect on the polymerization reaction. An increase in ionic strength slightly increased the rate. The overall rate of polymerization, R_p, showed a square dependence on [monomer] and a half-order dependence on [peroxodisulfate]. A first-order dependence on [ascorbic acid] at low concentrations (<3.0 × 10^?3 mol L^?1) followed by a decrease in R_p at higher concentrations of ascorbic acid (>3.0 × 10^?3 mol L^?1) was also noted. R_p remained unchanged up to 40°C and showed a decline thereafter. Addition of catalytic amounts of cupric ions decreased the rate whereas ferric ions were found to increase the rate. Added sulfuric acid in the range (6.0?50.0) × 10^?5 mol L^?1 decreased the R_p.     

Effect of pyridine on the kinetics of polymerization of methyl methacrylate initiated by benzoyl peroxide and azobisisobutyronitrile at 60°C

Solution polymerization of MMA, with pyridine as the solvent and BZ₂O₂ and AIBN as thermal initiators, was studied kinetically at 60°C. The monomer exponent varied from 0.45 to 0.91 as [BZ₂O₂] was increased from 1 × 10^?2 to 30 × 10^?2 mole/liter in a concentration range of 8.3-4.6 mole/liter for MMA. For AIBN-initiated polymerization the monomer exponent remained constant at 0.69 as [AIBN] varied from 0.4 × 10^?2 to 1.0 × 10^?2 mole/liter in the same concentration range for MMA. The k²_p/k_t Value increased in both cases with an increase in pyridine concentration in the system. This was explained in terms of an increase in the k_p value, which was due presumably to the increased reactivity of the chain radicals by donor-acceptor interaction between the molecules of solvent pyridine and propagating PMMA radicals and in terms of lowering the k_t value for the diffusion-controlled termination reaction due to an increase in the medium viscosity and pyridine content.     

Aqueous polymerization of methyl methacrylate initiated by peroxydisulfate–citric acid redox system catalyzed by silver ion

The kinetics of the aqueous polymerization of methyl methacrylate initiated by potassium peroxydisulfate–citric acid catalyzed by silver ion was investigated in nitrogen atmosphere. The rate of polymerization is proportional to the square root of peroxydisulfate concentration. The initial rate increases with increasing citric acid concentration up to 15 × 10^?3M, after which it decreases. The rate of polymerization also increases initially with monomer concentration and decreases at higher monomer concentration. The effects of temperature and the addition of some solvents and salts on the rate of polymerization have also been studied and a suitable kinetic scheme has been proposed for the reaction.     

Grafting vinyl monomers onto silk fibers. IX. Graft copolymerization of methyl methacrylate onto silk using peroxydiphosphate-thiourea redox system

The graft copolymerization of methyl methacrylate (MMA) onto silk in aqueous media initiated by the potassium peroxydiphosphate-thiourea redox system was studied at 50°C. The rate of grafting was determined by changing [monomerl], [thiourea], [initiator], acidity of the medium, reaction medium, and temperature. A significant increase percent of grafting was noticed with increasing monomer concentration to 84.49 × 10^?2 mole/liter and the further increase is associated with the decrease of graft yield. The graft yield increases with an increase of thiourea (Tu) concentration to 25 × 10^?5 mole/liter; then it decreases. A measurable increase in graft yield was observed with an increase in acidity of the medium. Graft yield increases to a certain temperature, i.e., 50°C, and then it decreases. The graft yield increases with an increase of initiator concentration to 60 × 10^?4 mole/liter; then it decreases. The graft yield is medium dependent. A suitable kinetic path has been proposed and the rate equation has been derived.     

The Effect of Active Carbon on the Kinetics of Polymerization of Methyl Methacrylate

Rates of 2–2¹?azobisisobutyronitrile initiated polymerization of methyl methacrylate in benzene were determined at 77.2, 65.0, and 50.0°C. The variation of molecular weight of the polymer with temperature and conversion was also studied. At a fixed conversion of 2.0%, the molecular weight decreased from 2.05 × 10⁵ at 50°C to 1.4 × 10⁵ at 77.2°C. The ratio of the propagation rate coefficient to the square root of the termination rate coefficient was found to be 0.61, 0.397, and 0.374 at 77.2, 65.0, and 50.0°C, respectively, with an uncertainty of ±0.5°C in temperature. The effect of active carbon on the rates of polymerization at 77.2°C was measured. Rates of polymerization decreased in the presence of active carbon. For example, the initial rate of polymerization decreased from 7.8 × 10^?4 mole/(liter min) to 4.6 × 10^?4 mole/(liter min) when the carbon concentration was varied from 0 to 9.65 g/liter. The molecular weight of the polymer increased from an average of 1.4 × 10⁵ in the absence of carbon to 1.5 × 10⁵ when carbon was present.     

Ferric oxide-catalyzed polymerization of methyl methacrylate

The polymerization of methyl methacrylate was carried out in water at various concentrations of sodium bisulfite, ferric oxide, and methyl methacrylate at 30, 40, and 50°C. The effect of ferric oxide on the rate of polymerization was studied at 50°C. Rates of polymerization increased in the presence of ferric oxide. For example, the rate of polymerization increased from 3.4 × 10^?5 mole/l.-sec to 11.8 × 10^?5 mole/l.-sec when the ferric oxide concentration was varied from 0 to 15 g/l. water. The molecular weight of the polymer decreased from an average of 1.4 × 10⁶ in the absence of ferric oxide to 2.8 × 10⁵ when the ferric oxide was present. The variation of molecular weight of the polymers with temperature and conversion was studied. At a fixed conversion of 80%, the average molecular weight decreased from 3.4 × 10⁵ at 30°C to 2.2 × 10⁵ at 50°C. The average molecular weight was also found to increase with increasing monomer and initiator concentrations. It increased from 8.1 × 10⁴ to 5.3 × 10⁵ and from 3.4 × 10⁵ to 8.9 × 10⁵ as the initiator and monomer concentrations increased from 0.01 to 0.05 mole/l. and from 0.235 to 0.705 mole/l., respectively. The apparent energy of activation for the polymerization was found to be 15.6 and 9.7 kcal/mole in absence and in presence of ferric oxide, respectively.     

Polymerization of acrylamide initiated by the persulfate–thiosulfate redox couple

Conversion–time data were obtained for the polymerization of acrylamide initiated by the redox couple persulfate–thiosulfate by using a dilatometer. A plot of initial rate as a function of thiosulfate concentration shows a well-defined maximum and three distinct regions of behavior. In each region the shape of the conversion–time curves demonstrates the differences in apparent order with respect to monomer arising from changes in initiator concentration during an individual run. A reaction mechanism is proposed to explain the results, and a limiting form of the rate expression is derived for each of the three regions. The ranges of concentration studied are: persulfate, 9.5 × 10^?4?4.7 × 10^?2M; thiosulfate, 2 × 10^?5?2 × 10^?2M; initial monomer, 0.05–1.0M; and temperature, 30–50°C. Within these ranges the initial rate shows a halforder dependence on persulfate and a first-order dependence on initial monomer concentration.     

Persulfate-initiated polymerization of acrylamide

A dilatometric technique was used to obtain conversion–time data for the polymerization of acrylamide initiated by potassium persulfate in water. The results are summarized by the empirical rate expression, ?d[M₁]/dt = R_p = k_1.25[K₂S₂O₈]^0.5[M₁]^1.25, and k_1.25 = 1.70 × 10¹¹ exp {?16,900/RT} 1.^0.75/mole^?0.75-min. Persulfate was varied over the range 9.5 × 10^?4 to 5.2 × 10^×2 mole/l., and initial monomer concentration [M₁] was varied from 0.05 to 0.4 mole/l. The temperature range was 30?50°C. Results of analysis of the kinetics and energetics of the polymerization favor a cage-effect theory rather than a complex-formation theory to explain the order with respect to monomer.     

Molecular weight distributions in radiation-induced polymerization. III. γ-Ray-induced polymerization of styrene at low temperatures

The kinetics of the γ-radiation-induced polymerization of styrene was studied at radiation intensities of 8 × 10⁴, 2.4 × 10⁵, 3.1 × 10⁵, and 8.3 × 10⁵ rad/hr over a temperature range of ?10°C to 30°C. The water content of the irradiated samples varied from 1.0 × 10^?3 to 7.5 × 10^?3 mole/l. The power dependence of the rate of polymerization on the dose rate at ?10°C varied from 0.53 to 0.71 as the water content of the sample varied from 7.5 × 10^?3 to 1.0 × 10^?3 mole/l. A value of 3.1 kcal/mole was determined for the overall activation energy. Molecular weight distribution studies by gel-permeation chromatography indicated the presence of two distinct peaks. The contribution of each peak was dependent on specific experimental parameters. Kinetic data and molecular weight distribution data indicate the coexistence of two propagating species. Analysis of the data strongly suggests that a free-radical mechanism and a cationic mechanism are involved.     

Cerium (IV)-2-chloroethanol redox-pair initiated polymerization of acrylamide in aqueous medium

The kinetics of acrylamide polymerization has been investigated by employing cericammoniumnitrate-2-chloroethanol redox pair under nitrogen atmosphere at 30 ± 1°C. The rate of monomer disappearance is directly proportional to the concentration of 2-chloroethanol (1.0 × 10^?2 ? 10.0 × 10^?2 mol. dm^?3) and is inversely proportional to the ceric ion concentration (2.5 × 10^?3 ? 10.0 × 10^?3 mol. dm^?3) but shows square dependence to the concentration of monomer (5.0 × 10^?2 ? 25.0 × 10^?2 mol. dm^?3). The rate of ceric ion disappearance is directly proportional to the initial concentration of ceric ion and 2-chloroethanol but independent of acrylamide concentration. The viscometric average molecular weight (M _v) decreases on increasing the concentration of ceric ion and increases on increasing the concentrations of acrylamide and 2-chloroethanol. A tentative mechanism has been proposed.     

Aqueous polymerization of acrylonitrile initiated by the bromate–thiourea redox system

The aqueous polymerization of acrylonitrile initiated by an acidified bromate–thiourea redox system has been studied under nitrogen atmosphere. The rate of polymerization is independent of thiourea concentration over the range 2–9 × 10^?3M and reaches maximum at 9 × 10^?3M. The rate varies linearly with [monomer]. The initial rate of polymerization as well as the maximum conversion increases within the range of 4–22.5 × 10^?3M KBrO₃, but beyond 22.5 × 10^?3M the rate of polymerization decreases. The initial rate and the limiting conversion increases with increasing polymerization temperature in the range 30–45°C; and beyond 45°C they decrease. The effect of certain neutral salts, water-soluble solvents, and micelles of cationic, anionic, and nonionic surfactants on the rate of polymerization has been investigated.     

Aqueous polymerization of acrylamide initiated by oxygenated cobalt(III) triethylenetetramine complex

Polymerization of acrylamide was thermally initiated by the oxygenated cobalt( III ) triethylenetetramine complex. Rate, conversion, and molecular weights obtained are favorable comparable to those initiated by K₂S₂O₄ and K₂S₂O₈ initiators. An induction period is about 3 mins. The value of K_df at 60°C is 6.75 × 10^?5 s^?1, and the chain transfer to monomer constant is 1.2 × 10^?5. The rate dependence obtained are a half order on the initiator concentration and a 1.38 order on the monomer concentration. The mole fraction of combination termination occurred in the overall termination reactions evaluated is 0.746.     

Polymerization of acrylamide initiated by the Ce4+/thiourea redox system

The polymerization of acrylamide (M) initiated by the Ce⁴⁺/thiourea (TU) redox system has been studied in an aqueous sulfuric acid medium at 35 ± 0.2°C under nitrogen atmosphere. The rate of polymerization is governed by the expression The activation energy is 5.9 kcal deg^?1 mol^?1 in the investigated temperature range 30–50°C. The molecular weight is directly proportional to the concentration of monomer and inversely proportional to the catalyst concentration. With increasing concentration of DMF molecular weight decreases. The range of concentrations for which these observations hold at sulfuric acid concentration of 2.5 × 10^?2 mol/L are [monomer] = 5.0 × 10^?2–3.0 × 10^?1, [catalyst] = (5.0–15.0) × 10^?4, and [activator] = (1.0–6.0) × 10^?3 mol/L.     

Electrocatalytic Determination of Ascorbic Acid at the Surface of 2,7‐Bis(ferrocenyl ethyl)fluoren‐9‐one Modified Carbon Paste Electrode

A chemically modified carbon paste electrode with 2,7‐bis(ferrocenyl ethyl)fluoren‐9‐one (2,7‐BFEFMCPE) was employed to study the electrocatalytic oxidation of ascorbic acid in aqueous solution using cyclic voltammetry, differential pulse voltammetry and chronoamperometry. The diffusion coefficient (D=1.89×10^?5 cm² s^?1), and the kinetic parameter such as the electron transfer coefficient, α (=0.42) of ascorbic acid oxidation at the surface of 2,7‐BFEFMCPE was determined using electrochemical approaches. It has been found that under an optimum condition (pH 7.00), the oxidation of ascorbic acid at the surface of such an electrode occurs at a potential about 300 mV less positive than that of an unmodified carbon paste electrode. The catalytic oxidation peak currents show a linear dependence on the ascorbic acid concentration and linear analytical curves were obtained in the ranges of 8.0×10^?5 M–2.0×10^?3 M and 3.1×10^?5 M–3.3×10^?3 M of ascorbic acid with correlation coefficients of 0.9980 and 0.9976 in cyclic voltammetry and differential pulse voltammetry, respectively. The detection limits (2δ) were determined to be 2.9×10^?5 M and 9.0×10^?6 M with cyclic voltammetry and differential pulse voltammetry, respectively. This method was also examined for determination of ascorbic acid in pharmaceutical preparations.     

Flow Injection Analysis Determination of Ascorbic Acid with Spectrofluorimetric Detection

Abstract

A flow injection system for the fluorescence determination of low level of ascorbic acid is proposed. The method is based on the rapid oxidation of ascorbic acid by thallium(I). The fluorescence signal at 419 nm is proportional to the amount of ascorbic acid in the range of (1.4–28.0) × 10^?7 mole. The relative standard deviations for ten replicate measurements of 1.4 × 10^?6 mole of ascorbic acid was 1.3%. The sample rate of 45 ± 5 sample per hour was achieved. The usefulness of the method was tested in the determination of ascorbic acid in fruit juices and vitamin C tablets.     

Analysis and Characterization of Microwave Irradiation–Induced Graft Copolymerization of Methyl Methacrylate onto Delignified Grewia Optiva Fiber

Grafting of methyl methacrylate (MMA) onto delignified Grewia optiva fiber using ascorbic acid/H₂O₂ as an initiator was carried out under microwave irradiation. The effects of varying the microwave power, exposure time, and concentration of initiator and monomer of graft polymerization were studied to obtain maximum grafting percentage (26.54%). The experimental results showed that the optimal conditions for grafting were: exposure time, 10min; microwave power, 110 W; ascorbic acid concentration, 3.74mol/L × 10^?2; H₂O₂ concentration, 0.97mol/L × 10^?1; monomer concentration, 1.87mol/L × 10^?1. The graft copolymers were characterized by Fourier transform-infrared (FT-IR) spectroscopy, scanning electron microscopy (SEM), and thermogravimetric analysis (TGA).