Novel approach for catalytic cyclopropanation of alkenes via (2-furyl)carbene complexes from 1-benzoyl-cis-1-buten-3-yne

The reaction of conjugated ene-yne-ketones 3 with a variety of alkenes in the presence of a catalytic amount of Cr(CO)(5)(THF) at room temperature gives (2-furyl)cyclopropanes in good yields. These cyclopropanation reactions proceed via (2-furyl)carbene-chromium intermediates 4 formed in situ from ene-yne-ketones 3. Late transition metals, such as [RuCl(2)(CO)(3)](2), [RhCl(cod)](2), PdCl(2), and PtCl(2), also catalyze effectively the cyclopropanation of styrene with 3.     

Asymmetric inter- and intramolecular cyclopropanation of alkenes catalyzed by chiral ruthenium porphyrins. Synthesis and crystal structure of a chiral metalloporphyrin carbene complex.

Extensive investigations of asymmetric intermolecular cyclopropanation of terminal alkenes with diazoacetates catalyzed by ruthenium porphyrin [Ru(P*)(CO)(EtOH)] (1, H2P = 5,10,15,20-tetrakis[(1S,4R,5R,8S)-1,2,3,4,5,6,7,8-octahydro-1,4:5,8-dimethanoanthracene-9-yl]porphyrin) and the application of catalyst 1 to asymmetric intramolecular cyclopropanation of allylic or homoallylic diazoacetates are described. The intermolecular cyclopropanation of styrene and its derivatives with ethyl diazoacetate afforded the corresponding cyclopropyl esters in up to 98% ee with high trans/cis ratios of up to 36 and extremely high catalyst turnovers of up to 1.1 x 10(4). Examination of the effects of temperature, diazoacetate, solvent, and substituent in the intermolecular cyclopropanation reveals that (i) both enantioselectivity and trans selectivity increase with decreasing temperature, (ii) sterically encumbered diazoacetates N2CHCO2R, such as R = Bu(t), and donor solvents, such as diethyl ether and tetrahydrofuran, are beneficial to the trans selectivity, and (iii) electron-donating para substituents on styrene accelerate the cyclopropanations, with the log(k(X)/k(H)) vs sigma(+) plot for para-substituted styrenes p-X-C6H4CH=CH2 (X = MeO, Me, Cl, CF3) exhibiting good linearity with a small negative rho(+) value of -0.44 +/- 0.09. In the case of intramolecular cyclopropanation, complex 1 promoted the decomposition of a series of allylic diazoacetates to form the cyclopropyl lactones in up to 85% ee, contributing the first efficient metalloporphyrin catalyst for an asymmetric intramolecular cyclopropanation. Both the inter- and intramolecular cyclopropanations were proposed to proceed via a reactive chiral ruthenium carbene intermediate. The enantioselectivities in these processes were rationalized on the basis of the X-ray crystal structures of closely related stable chiral carbene complexes [Ru(P*)(CPh2)] (2) and [Ru(P*)(C(Ph)CO2CH2CH=CH2)] (3) obtained from reactions of complex 1 with N2CPh2 and N2C(Ph)CO2CH2CH=CH2, respectively.     

Generation and reaction of tungsten-containing carbonyl ylides: [3 + 2]-cycloaddition reaction with electron-rich alkenes

Novel tungsten-containing carbonyl ylides 7, generated by the reaction of the o-alkynylphenyl carbonyl derivatives 1 with a catalytic amount of W(CO)(5)(thf), reacted with alkenes to give polycyclic compounds 5 through [3 + 2]-cycloaddition reaction followed by intramolecular C-H insertion of the produced nonstabilized carbene complex intermediates 8. In the presence of triethylsilane, these tungsten-containing carbene intermediates 8 were smoothly trapped intermolecularly by triethylsilane to give silicon-containing cycloadducts 17 with regeneration of the W(CO)(5) species. By this procedure, the scope of alkenes employable for this reaction was clarified. The presence of the tungsten-containing carbonyl ylide 7c was confirmed by direct observation of the mixture of o-ethynylphenyl ketone 1c and W(CO)(5)(thf-d(8)). Careful analysis of the intermediate by 2D NMR, along with the observation of the direct coupling with tungsten-183 employing the (13)C-labeled substrate, confirmed the structure of the ylide 7c. Examination using (E)- or (Z)- vinyl ether revealed that the [3 + 2]-cycloaddition reaction proceeded in a concerted manner and that the facial selectivity of the reaction differed considerably depending on the presence or absence of triethylsilane. These results clarified the reversible nature of this [3 + 2]-cycloaddition reaction.     

Rhodium-catalyzed cyclopropanation using ene-yne-imino ether compounds as precursors of (2-pyrrolyl)carbenoids

[reaction: see text] The reaction of alkenes with conjugated ene-yne-imino ether or ene-yne-aldimine in the presence of a catalytic amount of [Rh(OAc)(2)](2) gives (2-pyrrolyl)cyclopropanes in good yields. The key intermediate of this cyclopropanation is a (2-pyrrolyl)carbenoid generated by the nucleophilic attack of imine nitrogen atom at an internal alkyne carbon activated by rhodium complex. The intramolecular reaction also proceeds to afford a polycyclic pyrrole.     

Ru-catalyzed ring-opening and substitution reactions of heteroaromatic compounds using propargylic carboxylates as precursors of vinylcarbenoids

[reaction: see text] The reaction of heteroaromatic compounds with propargylic carboxylates in the presence of a catalytic amount of [RuCl(2)(CO)(3)](2) or PtCl(2) gives trienes in good yields. The key intermediate is an electrophilic (1-acetoxylvinyl)carbene complex generated from the activated propargylic acetates with transition metals.     

Carbonylchromium derivatives of bismuth: new syntheses and relevance to cbond;o activation

We have discovered a series of novel pentacarbonylchromium derivatives of bismuth from the reactions of NaBiO(3) with [Cr(CO)(6)] in KOH/MeOH solutions. When the reaction was carried out at room temperature, the highly charged [Bi[Cr(CO)(5)](4)](3-) (1) was obtained, whose structure was shown by X-ray analysis to possess a central bismuth atom tetrahedrally coordinated to four [Cr(CO)(5)] groups. As the reaction was heated at 80 degrees C, the methyl-substituted complex [MeBi[Cr(CO)(5)](3)](2-)(2) was obtained, presumably via the CbondO activation of MeOH. Further reactions of 1 with CH(2)Cl(2) or CHtbondCCH(2)Br form the halo-substituted complexes [XBi[Cr(CO)(5)](3)](2-)(X=Cl, 3; Br, 4), respectively. On the other hand, the reactions of 1 with RI (R=Me, Et) led to the formation of the alkyl-substituted complexes [RBi[Cr(CO)(5)](3)](2-)(R=Me, 2; Et). The formation of complexes 1-4 is discussed, presumably via the intermediate bismuthinidene [Bi[Cr(CO)(5)](3)](-) or the trianion [Bi[Cr(CO)(5)](3)](3-).     

Synthesis, structure and reactivity of novel pyridazine-coordinated diiron bridging carbene complexes

[{mu-(Pyridazine-N(1):N(2))}Fe(2)(mu-CO)(CO)(6)](1) reacts with aryllithium reagents, ArLi (Ar = C(6)H(5), m-CH(3)C(6)H(4)) followed by treatment with Me(3)SiCl to give the novel pyridazine-coordinated diiron bridging siloxycarbene complexes [(C(4)H(4)N(2))Fe(2){mu-C(OSiMe(3))Ar}(CO)(6)](2, Ar = C(6)H(5); 3, Ar =m-CH(3)C(6)H(4)). Complex 2 reacts with HBF(4).Et(2)O at low temperature to yield a cationic bridging carbyne complex [(C(4)H(4)N(2))Fe(2)(mu-CC(6)H(5))(CO)(6)]BF(4)(4). Cationic 4 reacts with NaBH(4) in THF at low temperature to afford the diiron bridging arylcarbene complex [(C(4)H(4)N(2))Fe(2){mu-C(H)C(6)H(5)}(CO)(6)](5). Unexpectedly, the reaction of 4 with NaSCH(3) under similar conditions gave the bridging arylcarbene complex 5 and a carbonyl-coordinated diiron bridging carbene complex [Fe(2){mu-C(SCH(3))C(6)H(5)}(CO)(7)](6), while the reaction of NaSC(6)H(4)CH(3)-p with 4 affords the expected bridging arylthiocarbene complex [(C(4)H(4)N(2))Fe(2){mu-C(SC(6)H(4)CH(3)-p)C(6)H(5)}(CO)(6)](7), which can be converted into a novel diiron bridging carbyne complex with a thiolato-bridged ligand, [Fe(2)(mu-CC(6)H(5))(mu-SC(6)H(4)CH(3)-p)(CO)(6)](8). Cationic can also react with the carbonylmetal anionic compound Na(2)[Fe(CO)(4)] to yield complex 5, while the reactions of 4 with carbonylmetal anionic compounds Na[M(CO)(5)(CN)](M = Cr, Mo, W) produce the diiron bridging aryl(pentacarbonylcyanometal)carbene complexes [(C(4)H(4)N(2))Fe(2)-{mu-C(C(6)H(5))NCM(CO)(5)}(CO)(6)](9, M = Cr; 10, M = Mo; 11, M = W). The structures of complexes 2, 5, 6, 8, and 9 have been established by X-ray diffraction studies.     

Stepwise synthesis of a hydrido, N-heterocyclic dicarbene iridium(III) pincer complex featuring mixed NHC/abnormal NHC ligands

We describe a stepwise synthesis of the hydrido, N-heterocyclic dicarbene iridium(III) pincer complex [Ir(H)I(C(NHC)CC(aNHC))(NCMe)] (3) which features a combination of normal and abnormal NHC ligands. The reaction of the bis(imidazolium) diiodide [(CH(imid)CHCH(imid))]I(2) (1) with [Ir(μ-Cl)(cod)](2) afforded first the mono-NHC Ir(I) complex [IrI(cod)(CH(imid)CHC(NHC))]I (2), which was then reacted with 2 equiv. of Cs(2)CO(3) in acetonitrile at 60 °C for 40 h to yield 3. These observations support our previously proposed mechanism for the formation of hydrido, N-heterocyclic dicarbene iridium(III) pincer complexes from the reaction of bis(imidazolium) salts with weak bases involving a mono-NHC Ir(I) intermediate. We describe the reactivity of the mono-NHC Ir(I) complex 2 under various conditions. By changing the reaction solvent from MeCN to toluene, we observed the cleavage of the imidazol-2-ylidene ring and the formation of an iminoformamide-containing mono-NHC Ir(I) complex [IrI(cod){[NHCH=CHN(Ad)CHO]CHC(NHC)}] (4). Complex 4 was also prepared in high yield from the reaction of 2 with strong bases (potassium tert-butoxide or potassium hexamethyldisilazane), via the initial formation of the complex [IrI(cod)(CH(NHC)CHC(NHC))] (5), which contains a coordinated NHC moiety and a free carbene arm, followed by subsequent hydrolysis of the latter. The bis(imidazolium) salt 1 can be deprotonated by strong bases to form the bis(carbene) ligand C(NHC)CHC(NHC) (6), which readily reacts with [Ir(μ-Cl)(cod)](2) to give the dinuclear complex [{IrI(cod)}(2)(μ-C(NHC)CHC(NHC))] (7), in which the N-heterocyclic bis(carbene) ligand bridges the two metals through the carbene carbon atoms.     

Constructing homo- and hetero-metallic molecular topologies using pyridylcarboxylates as spacers: preparation of a half-ring complex with active coordination sites

Addition of isonicotinic acid NC(5)H(4)CO(2)H (or isonicH) to [Pt(dppf)(MeCN)(2)](2+)2OTf(-)(dppf = 1,1'-bis(diphenylphosphino)ferrocene, OTf = triflate) affords a mixture of the homometallic molecular square [Pt(4)(dppf)(4)(mu-O(2)CC(5)H(4)N)(4)](4+)4OTf(-), 1 and its precursor intermediate [Pt(dppf)(eta(1)-NC(5)H(4)CO(2)H)(2)](2+)2OTf(-), 2. The latter captures [Pd(dppf)(MeCN)(2)](2+)2OTf(-) to give a heterometallic square, [Pt(2)Pd(2)(dppf)(4)(mu-O(2)CC(5)H(4)N)(4)](4+)4OTf(-), 3. Slight skeletal modification of the ligand leads to different assemblies. This is illustrated by the addition of NC(5)H(4)CH(2)CO(2)H.HCl to [Pt(dppf)(MeCN)(2)](2+)2OTf(-) to give [PtCl(dppf)(NC(5)H(4)CH(2)CO(2)H)](+)OTf(-), 4, which reacts with another equivalent of AgOTf to yield the dibridged complex [Pt(2)(dppf)(2)(mu-NC(5)H(4)CH(2)CO(2))(2)](2+)2OTf(-), 5. All complexes, with the exception of , have been structurally characterized by single-crystal X-ray crystallography. Complexes 2 and 4 are potential precursors to further molecular topologies.     

Synthesis and Chemical and Electrochemical Characterization of Fe-S Carbonyl Clusters. X-ray Crystal Structures of [N(PPh(3))(2)](2)[Fe(5)S(2)(CO)(14)] and [N(PPh(3))(2)](2)[Fe(6)S(6)(CO)(12)

A reinvestigation of the redox behavior of the [Fe(3)(&mgr;(3)-S)(CO)(9)](2)(-) dianion led to the isolation and characterization of the new [Fe(5)S(2)(CO)(14)](2)(-), as well as the known [Fe(6)S(6)(CO)(12)](2)(-) dianion. As a corollary, new syntheses of the [Fe(3)S(CO)(9)](2)(-) dianion are also reported. The [Fe(5)S(2)(CO)(14)](2)(-) dianion has been obtained by oxidative condensation of [Fe(3)S(CO)(9)](2)(-) induced by tropylium and Ag(I) salts or SCl(2), or more straightforwardly through the reaction of [Fe(4)(CO)(13)](2)(-) with SCl(2). The [Fe(6)S(6)(CO)(12)](2)(-) dianion has been isolated as a byproduct of the synthesis of [Fe(3)S(CO)(9)](2)(-) and [Fe(5)S(2)(CO)(14)](2)(-) or by reaction of [Fe(4)(CO)(13)](2)(-) with elemental sulfur. The structures of [N(PPh(3))(2)](2)[Fe(5)S(2)(CO)(14)] and [N(PPh(3))(2)](2)[Fe(6)S(6)(CO)(12)] were determined by single-crystal X-ray diffraction analyses. Crystal data: for [N(PPh(3))(2)](2)[Fe(5)S(2)(CO)(14)], monoclinic, space group P2(1)/c (No. 14), a = 24.060(5), b = 14.355(6), c = 23.898(13) ?, beta = 90.42(3) degrees, Z = 4; for [N(PPh(3))(2)](2)[Fe(6)S(6)(CO)(12)], monoclinic, space group C2/c (No. 15), a = 34.424(4), b = 14.081(2), c = 19.674(2) ?, beta = 115.72(1) degrees, Z = 4. The new [Fe(5)S(2)(CO)(14)](2)(-) dianion shows a "bow tie" arrangement of the five metal atoms. The two Fe(3) triangles sharing the central Fe atom are not coplanar and show a dihedral angle of 55.08(3) degrees. Each Fe(3) moiety is capped by a triply bridging sulfide ligand. The 14 carbonyl groups are all terminal; two are bonded to the unique central atom and three to each peripheral iron atom. Protonation of the [Fe(5)S(2)(CO)(14)](2)(-) dianion gives reversibly rise to the corresponding [HFe(5)S(2)(CO)(14)](-) monohydride derivative, which shows an (1)H-NMR signal at delta -21.7 ppm. Its further protonation results in decomposition to mixtures of Fe(2)S(2)(CO)(6) and Fe(3)S(2)(CO)(9), rather than formation of the expected H(2)Fe(5)S(2)(CO)(14) dihydride. Exhaustive reduction of [Fe(5)S(2)(CO)(14)](2)(-) with sodium diphenyl ketyl progressively leads to fragmentation into [Fe(3)S(CO)(9)](2)(-) and [Fe(CO)(4)](2)(-), whereas electrochemical, as well as chemical oxidation with silver or tropylium tetrafluoroborate, in dichloromethane, generates the corresponding [Fe(5)S(2)(CO)(14)](-) radical anion which exhibits an ESR signal at g = 2.067 at 200 K. The electrochemical studies also indicated the existence of a subsequent one-electron anodic oxidation which possesses features of chemical reversibility in dichloromethane but not in acetonitrile solution. A reexamination of the electrochemical behavior of the [Fe(3)S(CO)(9)](2)(-) dianion coupled with ESR monitoring enabled the spectroscopic characterization of the [Fe(3)S(CO)(9)](-) radical monoanion and demonstrated its direct involvement in the generation of the [Fe(5)S(2)(CO)(14)](n)()(-) (n = 0, 1, 2) system.     

Primary amino-functionalized N-heterocyclic carbene ligands as support for Au(I)···Au(I) interactions: structural, electrochemical, spectroscopic and computational studies of the dinuclear [Au2(NH2(CH2)2imMe)2][NO3]2

The N-heterocyclic carbene (NHC) precursor, 1-(2-aminoethyl)-3-methylimidazolium nitrate, [NH(2)(CH(2))(2)imMe)]NO(3) ([3][NO(3)]) reacted with Ag(2)CO(3) in dimethyl sulfoxide readily yielding a Ag(I)-(NHC-NH(2)) complex presenting limited stability in solution. The in situ carbene transfer reaction of the latter with [Au(tht)Cl] afforded the first example of a dinuclear gold(I) complex [Au(2)(NH(2)(CH(2))(2)imMe)(2)][NO(3)](2) ([5][NO(3)](2)) bearing a primary amino-functionalized NHC ligand. The complex has been characterized by NMR, mass spectrometry, X-ray crystallography and cyclic voltammetry; the electrochemical behaviour and photophysical properties of [5][NO(3)](2) have been also investigated and the experimental data have been compared with density functional theory (DFT) and Time Dependent (TDDFT) calculations. Single-crystal structural studies showed that the Au(I)-carbene compound contains dinuclear (AuL)(2) cations in which pairs of gold(I) centres are linked by a pair of bridging ligands, with a Au···Au aurophilic contact of 3.2332(17) ? that is maintained in solution as documented by the DFT calculations. Complex [5][NO(3)](2) is photoluminescent in solution at room temperature and the high energy emission peak at 410 nm is remarkably shifted with respect to the absorption band centered at 260 nm.     

Formation of cis-enediyne complexes from rhenium alkynylcarbene complexes

Dimerization of the alkynylcarbene complex Cp(CO)(2)Re=C(Tol)C(triple bond)CCH(3) (8) occurs at 100 degrees C to give a 1.2:1 mixture of enediyne complexes [Cp(CO)(2)Re](2)[eta(2),eta(2)-TolC(triple bond)CC(CH(3))=C(CH(3))C(triple bond)CTol] (10-Eand 10-Z), showing no intrinsic bias toward trans-enediyne complexes. The cyclopropyl-substituted alkynylcarbene complex Cp(CO)(2)Re=C(Tol)C(triple bond)CC(3)H(5) (11) dimerizes at 120 degrees C to give a 5:1 ratio of enediyne complexes [Cp(CO)(2)Re](2)[eta(2),eta(2)-TolC(triple bond)C(C(3)H(5))C=C(C(3)H(5))C(triple bond)CTol] (12-E and 12-Z); no ring expansion product was observed. This suggests that if intermediate A formed by a [1,1.5] Re shift and having carbene character at the remote alkynyl carbon is involved, then interaction of the neighboring Re with the carbene center greatly diminishes the carbene character as compared with that of free cyclopropyl carbenes. The tethered bis-(alkynylcarbene) complex Cp(CO)(2)Re=C(Tol)C(triple bond)CCH(2)CH(2)CH(2)C(triple bond)CC(Tol)= Re(CO)(2)Cp (13) dimerizes rapidly at 12 degrees C to give the cyclic cis-enediyne complex [Cp(CO)(2)Re](2)[eta(2),eta(2)-TolC(triple bond)CC(CH(2)CH(2)CH(2))=CC(triple bond)CTol] (15). Attempted synthesis of the 1,8-disubstituted naphthalene derivative 1,8-[Cp(CO)(2)Re=C(Tol)C(triple bond)C](2)C(10)H(6) (16), in which the alkynylcarbene units are constrained to a parallel geometry, leads to dimerization to [Cp(CO)(2)Re](2)(eta(2),eta(2)-1,2-(tolylethynyl)acenaphthylene] (17). The very rapid dimerizations of both 13 and 16 provide compelling evidence against mechanisms involving cyclopropene intermediates. A mechanism is proposed which involves rate-determining addition of the carbene center of A to the remote alkynyl carbon of a second alkynylcarbene complex to generate vinyl carbene intermediate C, and rearrangement of C to the enediyne complex by a [1,1.5] Re shift.     

Preparative and structural studies on the carbonyl cyanides of iron, manganese, and ruthenium: fundamentals relevant to the hydrogenases

The reaction of cyanide, carbon monoxide, and ferrous derivatives led to the isolation of three products, trans- and cis-[Fe(CN)(4)(CO)(2)](2)(-) and [Fe(CN)(5)(CO)](3)(-), the first two of which were characterized by single-crystal X-ray diffraction. The new compounds show self-consistent IR, (13)C NMR, and mass spectroscopic properties. The reaction of trans-[Fe(CN)(4)(CO)(2)](2)(-) with Et(4)NCN gives [Fe(CN)(5)(CO)](3)(-) via a first-order (dissociative) pathway. The corresponding cyanation of cis-[Fe(CN)(4)(CO)(2)](2)(-), which is a minor product of the Fe(II)/CN(-)/CO reaction, does not proceed at measurable rates. Methylation of [Fe(CN)(5)(CO)](3)(-) gave exclusively cis-[Fe(CN)(4)(CNMe)(CO)](2)(-), demonstrating the enhanced nucleophilicity of CN(-) trans to CN(-) vs. CN(-) trans to CO. Methylation has an electronic effect similar to that of protonation as determined electrochemically. We also characterized [M(CN)(3)(CO)(3)](n)(-) for Ru (n = 1) and Mn (n = 2) derivatives. The Ru complex, which is new, was prepared by cyanation of a [RuCl(2)(CO)(3)](2) solution.     

Asymmetric Rh(II)-catalyzed cyclopropanation of alkenes with diacceptor diazo compounds: p-methoxyphenyl ketone as a general stereoselectivity controlling group

Different diacceptor diazo compounds bearing an α-PMP-ketone group were found to be effective carbene precursors for the highly stereoselective Rh(2)(S-TCPTTL)(4)-catalyzed cyclopropanation of alkenes (EWG = NO(2), CN, CO(2)Me). The resulting products were readily transformed into a variety of biologically relevant enantiopure molecules, such as cyclopropane α- and β-amino acid derivatives. Different mechanistic studies carried out led to a rationale for the high diastereo- and enantioselectivity obtained, where the PMP-ketone moiety was found to play a critical role in the stereoinduction process. Additionally, the use of catalytic amounts of achiral Lewis bases to influence the enantioinduction of the reactions developed is documented.     

Synthesis, characterization, and structural studies of multimetallic ferrocenyl carbene complexes of group VII transition metals

Fischer carbene complexes of the group VII transition metals (Mn and Re) containing at least two or three different transition metal substituents, all in electronic contact with the carbene carbon atom, were synthesized. The structural features and their relevance to bonding in the carbene multimetal compounds were investigated, as they represent indicators of possible reactivity sites in polymetallic carbene assemblies. For complexes of the type [ML(x){C(OR)R'}] (ML(x) = MnCp(CO)(2) or Re(2)(CO)(9)), ferrocenyl (Fc) was chosen as the R' substituent, while the OR substituent was systematically varied between an ethoxy or a titanoxy group, to yield the complexes 1a (ML(x) = MnCp(CO)(2), R = Et, R' = Fc), 2a (ML(x) = MnCp(CO)(2), R = TiCp(2)Cl, R' = Fc), 3a (ML(x) = Re(2)(CO)(9), R = Et, R' = Fc), and 4a (ML(x) = Re(2)(CO)(9), R = TiCp(2)Cl, R' = Fc). Direct lithiation of the ferrocene with n-BuLi/TMEDA at elevated temperatures, followed by the Fischer method of carbene preparation, resulted in formation of the novel biscarbene complexes with bridging ferrocen-1,1'-diyl (Fc') substituents [{π-Fe(C(5)H(4))(2)-C,C'}{C(OEt)ML(x)}(2)] (1b, ML(x) = MnCp(CO)(2); 3b, ML(x) = Re(2)(CO)(9)) or the unusual bimetallacyclic bridged biscarbene complexes [{π-TiCp(2)O(2)-O,O'}{π-Fe(C(5)H(4))(2)-C,C'}{CML(x)}(2)] (2b, ML(x) = MnCp(CO)(2); 4b, ML(x) = Re(2)(CO)(9)). The target compounds that were isolated displayed a variety of different geometric isomers and conformations. The greater reactivity of the binary dirhenium acylates in solution, compared to that of the cyclopentadienyl manganese acylate, resulted in a complex reaction mixture. Although the stabilization of hydroxycarbene or hydrido-acyl intermediates of dirhenium carbonyls could not be achieved, their existence in solution was confirmed by the isolation of [(π-H)(2)-(Re(CO)(4){C(O)Fc})(2)] (8), the unique dichloro-bridged biscarbene complex fac-[(π-Cl)(2)-(Re(CO)(3){C(OEt)Fc})(2)] (6), the known hydrido complex [Re(3)(CO)(14)H] (5), the acyl complex [Re(CO)(5){C(O)Fc}] (7), and the aldehyde-functionalized eq-[Re(2)(CO)(9){C(OTiCp(2)Cl)(Fc'CHO)}] (9).     

Catalytic and asymmetric cyclopropanation of alkenes catalysed by rhenium(I) bipyridine and terpyridine tricarbonyl complexes

Re(I) tricarbonyl bipyridine and terpyridine complexes catalyse stereospecific cyclopropanation of alkenes; high selectivity of cyclopropane vs coupling and an ee of 73% and 62% for cis- and trans-cyclopropanes of styrene respectively were achieved with the [Re(L)(CO)(3)(MeCN)]OTf complex (L = chiral C(2)-symmetric terpyridine ligand).     

Synthesis, molecular structure and properties of the [H6-nNi30C4(CO)34(CdCl)2]n- (n=3-6) bimetallic carbide carbonyl cluster: a model for the growth of noncompact interstitial metal carbides

Reaction of the [Ni(9)C(CO)(17)](2-) dianion with CdCl(2)2.5 H(2)O in THF affords the novel bimetallic Ni--Cd carbide carbonyl clusters [H(6-n)Ni(30)C(4)(CO)(34)(micro(5)-CdCl)(2)](n-) (n=3-6), which undergo several protonation-deprotonation equilibria in solution depending on the basicity of the solvent or upon addition of acids or bases. Although the occurrence in solution of these equilibria complicates the pertinent electrochemical studies on their electron-transfer activity, they clearly indicate that the clusters [H(6-n)Ni(30)C(4)(CO)(34)(micro(5)-CdCl)(2)](n-) (n=3-6), as well as the structurally related [H(6-n)Ni(34)C(4)(CO)(38)](n-) (n=4-6), undergo reversible or partially reversible redox processes and provide circumstantial and unambiguous evidence for the presence of hydrides for n=3, 4 and 5. Three of the [H(6-n)Ni(30)C(4)(CO)(34)(micro(5)-CdCl)(2)](n-) anions (n=4-6) have been structurally characterized in their [NMe(3)(CH(2)Ph)](4)[H(2)Ni(30)C(4)(CO)(34)(CdCl)(2)]2 COMe(2), [NEt(4)](5)[HNi(30)C(4)(CO)(34)(CdCl)(2)]2 MeCN and [NMe(4)](6)[Ni(30)C(4)(CO)(34)(CdCl)(2)]6 MeCN salts, respectively. All three anions display almost identical geometries and bonding parameters, probably because charge effects are minimized by delocalization over such a large metal carbonyl anion. Moreover, the Ni(30)C(4) core in these Ni-Cd carbide clusters is identical within experimental error to those present in the [HNi(34)C(4)(CO)(38)](5-) and [Ni(35)C(4)(CO)(39)](6-) species, suggesting that the stepwise assembly of their nickel carbide cores may represent a general pathway of growth of nickel polycarbide clusters. The fact that the [H(6-n)Ni(30)C(4)(CO)(34)(micro(5)-CdCl)(2)](n-)(n=4-6) anions display two valence electrons more than the structurally related [H(6-n)Ni(34)C(4)(CO)(38)](n-) (n=4-6) species has been rationalized by extended Hückel molecular orbital (EHMO) analysis.     

Comproportionation of cationic and anionic tungsten complexes having an N-heterocyclic carbene ligand to give the isolable 17-electron tungsten radical CpW(CO)2(IMes)(•)

A series consisting of a tungsten anion, radical, and cation, supported by the N-heterocyclic carbene 1,3-bis(2,4,6-trimethylphenyl)imidazol-2-ylidene (IMes) and spanning formal oxidation states W(0), W(I), and W(II), has been synthesized, isolated, and characterized. Reaction of the hydride CpW(CO)(2)(IMes)H with KH and 18-crown-6 gives the tungsten anion [CpW(CO)(2)(IMes)](-)[K(18-crown-6)](+). Electrochemical oxidation of [CpW(CO)(2)(IMes)](-) in MeCN (0.2 M (n)Bu(4)N(+)PF(6)(-)) is fully reversible (E(1/2) = -1.65 V vs Cp(2)Fe(+?/0)) at all scan rates, indicating that CpW(CO)(2)(IMes)(?) is a persistent radical. Hydride transfer from CpW(CO)(2)(IMes)H to Ph(3)C(+)PF(6)(-) in MeCN affords [cis-CpW(CO)(2)(IMes)(MeCN)](+)PF(6)(-). Comproportionation of [CpW(CO)(2)(IMes)](-) with [CpW(CO)(2)(IMes)(MeCN)](+) gives the 17-electron tungsten radical CpW(CO)(2)(IMes)(?). This complex shows paramagnetically shifted resonances in the (1)H NMR spectrum and has been characterized by IR spectroscopy, low-temperature EPR spectroscopy, and X-ray diffraction. CpW(CO)(2)(IMes)(?) is stable with respect to disproportionation and dimerization. NMR studies of degenerate electron transfer between CpW(CO)(2)(IMes)(?) and [CpW(CO)(2)(IMes)](-) are reported. DFT calculations were carried out on CpW(CO)(2)(IMes)H, as well as on related complexes bearing NHC ligands with N,N' substituents Me (CpW(CO)(2)(IMe)H) or H (CpW(CO)(2)(IH)H) to compare to the experimentally studied IMes complexes with mesityl substituents. These calculations reveal that W-H homolytic bond dissociation energies (BDEs) decrease with increasing steric bulk of the NHC ligand, from 67 to 64 to 63 kcal mol(-1) for CpW(CO)(2)(IH)H, CpW(CO)(2)(IMe)H, and CpW(CO)(2)(IMes)H, respectively. The calculated spin density at W for CpW(CO)(2)(IMes)(?) is 0.63. The W radicals CpW(CO)(2)(IMe)(?) and CpW(CO)(2)(IH)(?) are calculated to form weak W-W bonds. The weakly bonded complexes [CpW(CO)(2)(IMe)](2) and [CpW(CO)(2)(IH)](2) are predicted to have W-W BDEs of 6 and 18 kcal mol(-1), respectively, and to dissociate readily to the W-centered radicals CpW(CO)(2)(IMe)(?) and CpW(CO)(2)(IH)(?).     

Surface-Mediated Organometallic Synthesis: High-Yield Preparations of Neutral and Anionic Osmium Carbonyl Clusters by Controlled Reduction of Silica-Supported [Os(CO)(3)Cl(2)](2) and OsCl(3) in the Presence of Na(2)CO(3) or K(2)CO(3)

[Os(3)(CO)(12)], [H(4)Os(4)(CO)(12)], [H(2)Os(4)(CO)(12)](2)(-), [Os(5)C(CO)(14)](2)(-), and [Os(10)C(CO)(24)](2)(-) have been synthesized selectively and in high yields by reductive carbonylation or hydrogenation of OsCl(3) or alpha-[Os(CO)(3)Cl(2)](2) supported on silica in the presence of alkali carbonates. The selectivity of the reaction is controlled by the choice of (i) the nature and quantity of the alkali carbonate (Na(2)CO(3) or K(2)CO(3)) added to silica, (ii) temperature, (iii) reaction time, and (iv) the gas-phase composition (CO, CO + H(2), or H(2)). These surface-mediated syntheses are often more selective and more efficient and usually require less drastic conditions than the best known syntheses in solution, confirming the potential use of the silica surface as a new reaction medium to prepare both neutral and anionic metal carbonyl clusters.     

Remarkable reactions of cyclooctatetraene diiron-bridging carbyne complexes with amino and amido compounds: nucleophilic addition to and breaking of the cyclooctatetraene ring

The reactions of the cationic, diiron-bridging carbyne complexes [Fe(2)(mu-CAr)(CO)(4)(eta(8)-C(8)H(8))]BF(4) (1, Ar=C(6)H(5); 2, Ar=p-CH(3)C(6)H(4); 3, Ar=p-CF(3)C(6)H(4)) with LiN(C(6)H(5))(2) in THF at low temperature gave novel N-nucleophilic-addition products, namely, the neutral, diiron-bridging carbyne complexes [Fe(2)(mu-CAr)(CO)(4)(eta(7)-C(8)H(8)N(C(6)H(5))(2))] (4, Ar=C(6)H(5); 5, Ar=p-CH(3)C(6)H(4); 6, Ar=p-CF(3)C(6)H(4))). Cationic bridging carbyne complexes 1-3 react with (C(2)H(5))(2)NH, (iC(3)H(7))(2)NH, and (C(6)H(11))(2)NH under the same conditions with ring cleavage of the COT ligand to produce the novel diiron-bridging carbene inner salts [Fe(2)[mu-C(Ar)C(8)H(8)NR(2)](CO)(4)] (7, Ar=C(6)H(5), R=C(2)H(5); 8, Ar=p-CH(3)C(6)H(4), R=C(2)H(5); 9, Ar=p-CF(3)C(6)H(4), R=C(2)H(5); 10, Ar=C(6)H(5), R=iC(3)H(7); 11, Ar=p-CH(3)C(6)H(4), R=iC(3)H(7); 12, Ar=p-CF(3)C(6)H(4), R=iC(3)H(7); 13, Ar=C(6)H(5), R=C(6)H(11); 14, Ar=p-CH(3)C(6)H(4), R=C(6)H(11), 15, Ar=p-CF(3)C(6)H(4), R=C(6)H(11)). Piperidine reacts similarly with cationic carbyne complex 3 to afford the corresponding bridging carbene inner salt [Fe(2)[mu-C(Ar)C(8)H(8)N(CH(2))(5)](CO)(4)] (16). Compound 9 was transformed into a new diiron-bridging carbene inner salt 17, the trans isomer of 9, by heating in benzene. Unexpectedly, the reaction of C(6)H(5)NH(2) with 2 gave a novel COT iron-carbene complex [Fe(2)[=C(C(6)H(4)CH(3)-p)NHC(6)H(5)](mu-CO)(CO)(3)(eta(8)-C(8)H(8))] (18). However, the analogous reactions of 2-naphthylamine with 2 and of p-CF(3)C(6)H(4)NH(2) with 3 produce novel chelated iron-carbene complexes [Fe(2)[=C(C(6)H(4)CH(3)-p)NC(10)H(7)](CO)(4)(eta(2):eta(3):eta(2)-C(8)H(9))] (19) and [Fe(2)[=C(C(6)H(4)CF(3)-p)NC(6)H(4)CF(3)-p](CO)(4)(eta(2):eta(3):eta(2)-C(8)H(9))] (20), respectively. Compound 18 can also be transformed into the analogous chelated iron-carbene complex [Fe(2)[=C(C(6)H(4)CH(3)-p)NC(6)H(5)](CO)(4)(eta(2):eta(3):eta(2)-C(8)H(9))] (21). The structures of complexes 6, 9, 15, 17, 18, and 21 have been established by X-ray diffraction studies.