Evaluation of metal fractions in river sediments and waters: application of chelation chromatography-differential pulse anodic stripping voltammetry

The ability of chelation chromatography in combination with differential pulse anodic stripping voltammetry (DPASV) to provide a simple, fast and reliable way of dealing with interionic interferences, competitive complexations, re-adsorption of released metal ions and sorption of spiking metal ions by organic/inorganic materials in the complex matrixes of real natural samples has been critically examined. The technique is based on the selective complexation of target metal fractions on some novel sorbents which are polymeric chelating resins doped on stationary supports (Whatman No. 1 paper and silica gel). The usual complications of leaching of the resin and/or the chelating ligand and colloid retention on the sorption bed at any stage of separation were largely obviated with these sorbents under the operational conditions of metal sorption. A detailed study on the application of such sorbents to the differentiation of ionic (free), labile (ionic plus weakly complexed) and bound (strongly complexed) metal fractions present in local river-sediment and water samples was carried out. Chelating resin-impregnated paper (CRIP) and chelating resin-immobilized silica gel column (CRISC) methods of chromatographic separation of analyte trace metals in combination with the follow-up 'standard addition' procedure of the DPASV technique were employed. A modest attempt has been made to formulate a speciation (fractionation) scheme for metal contents present in river-sediments and waters on the basis of selective retention of ionic and labile fractions on complexing resins.     

ICP-OES determination of traces of Ru, Au, V and Ti preconcentrated and separated by a new poly(epoxy-melamine) chelating resin from solutions

A new poly(epoxy-melamine) chelating resin is synthesized from epoxy resin and used for the preconcentration and separation of traces of Ru(III), Au(III), V(V) and Ti(IV) ions from sample solutions. The ions analyzed can be quantitatively enriched by the resin at a flow-rate of 2 mL/min at pH 4, and quantitatively desorbed with 10 mL of 1 mol/L HCl + 0.2 g CS(NH₂)₂ at a flow-rate of 1 mL/min with recoveries of over 97%. The chelating resin can be reused 7 times without obvious loss of efficiency. Thousand-fold excesses of coexistent ions caused little interference during the enrichment and determination steps. The RSDs for the determination of 50 ng/mL Ru(III) and Au(III), 5.0 ng/mL V(V) and Ti(IV) were in the range of 1.5–4.5%. The recoveries of added standards in a real sample solution are between 96% and 100%, and the results for the ions analyzed in a nickel alloy sample are in good agreement with their reported values.     

Chelatbildende Austauscherharze,VII

Preparation and use of a resin with 1.8-dihydroxynaphthalene-O,O-diacetic acid as chelating group are described. Besides the separation of many of the common interfering ions it also permits the separation of Hf. The following ions could be separated quantitatively: Mg(II), Pb(II), Cu(II), Fe(III), La(III), Ce(IV), Th(IV), Ti(IV), and U(VI). During these and further qualitative and quantitative experiments no interfering ions could be found. A method for the separation of⁹⁵Zr from its daughter nuclide⁹⁵Nb is also described. The main problem proved to be the separation of Zr(IV) and Hf(IV), owing to their close resemblance. To accomplish quantitative determination of Zr and Hf without any separation,⁹⁵Zr and^175+181Hf radioisotopes were used. The chelating resin permits the separation of 95% of Hf(IV) from an equimolar solution. The main part of Hf(IV) is eluated by 2M hydrochloric acid, and subsequently Zr(IV) by 0.75M oxalic acid. The rest of Hf is enriched in the first fractions of the oxalic acid eluate, so that when eliminating these, even after a single step experiment hafnium free from zirconium and a rather pure fraction of zirconium are obtained. Even under extreme conditions of concentration (Zr∶Hf=91∶1) 75% of Hf can be separated free from Zr in a single step experiment.

---

---

Vorgetragen auf der IUPAC-Tagung in Prag, 1967.     

Extraction of metal ions by N-phenyl-, N-methyl-, and N-unsubstituted hydroxamic acid resins

Procedures are described for preparing macroreticular chelating resins with hydroxamic acid or N-methylhydroxamic acid functional groups. The chelating properties of the resins are compared with each other and with an N-phenylhydroxamic acid resin reported earlier. The extraction of 19 metal ions was studied as a function of pH for the N-methylhydroxamic acid resin. Several analytical applications of this resin have been demonstrated including the purification of chemical reagents, concentration of trace metal ions, and chromatographic separation of metal-ion mixtures.     

Synthesis and efficiency of a spherical macroporous epoxy-melamine chelating resin for preconcentrating trace elements from solutions

A new spherical macroporous epoxy-melamine chelating resin was synthesized simply and rapidly and used for the preconcentrating and separation of trace of Ga(III), In(III),Bi(III), Sn(IV)and Ti(IV) ions from sample solutions. The ions analyzed can be quantitatively enriched by the resin at a flow-rate of 2ml/min at pH4,and quantitatively desorbed with 10ml of 2mol/L HCl+0.2gCS(NH₂)₂ at a flow-rate of 1ml/min with recoveries of over 97%,The chelating resin can be reused 7times without obvious loss of efficiency.     

ICP-OES determination of traces of Ru, Au, V and Ti preconcentrated and separated by a new poly(epoxy-melamine) chelating resin from solutions

A new poly(epoxy-melamine) chelating resin is synthesized from epoxy resin and used for the preconcentration and separation of traces of Ru(III), Au(III), V(V) and Ti(IV) ions from sample solutions. The ions analyzed can be quantitatively enriched by the resin at a flow-rate of 2 mL/min at pH 4, and quantitatively desorbed with 10 mL of 1 mol/L HCl + 0.2 g CS(NH₂)₂ at a flow-rate of 1 mL/min with recoveries of over 97%. The chelating resin can be reused 7 times without obvious loss of efficiency. Thousand-fold excesses of coexistent ions caused little interference during the enrichment and determination steps. The RSDs for the determination of 50 ng/mL Ru(III) and Au(III), 5.0 ng/mL V(V) and Ti(IV) were in the range of 1.5–4.5%. The recoveries of added standards in a real sample solution are between 96% and 100%, and the results for the ions analyzed in a nickel alloy sample are in good agreement with their reported values. Received: 12 May 1997 / Revised: 1 September 1997 / Accepted: 9 October 1997     

双硫腙螯合型树脂同时分离富集-火焰原子吸收光谱法测定痕量铅和镉

以大孔聚苯乙烯树脂为母体,通过-N=N-,与双硫腙键合,合成了双硫腙螯合型树脂,并将其应用于痕量铅和镉的同时分离富集,实验了酸度、流速、共存离子干扰等因素对双硫腙螯合型树脂吸附和洗脱Pb和Cd的影响,建立了双硫腙螯合型树脂同时分离富集-火焰原子吸收光度法测定食品及环境样品中痕量Pb和Cd的方法.对Pb和Cd,方法的检出限分别为0.015和0.0013μg/mL,相对标准偏差(RSD)均优于3.0%.     

Azocalix[4]pyrrole Amberlite XAD-2: New polymeric chelating resins for the extraction, preconcentration and sequential separation of Cu(II), Zn(II) and Cd(II) in natural water samples

Two novel azocalix[4]pyrrole Amberlite XAD-2 polymeric chelating resins were synthesized by covalently linking diazotized Amberlite XAD-2 with calix[4]pyrrole macrocycles. The chelating resins were used for extraction, preconcentration and sequential separation of metal ions such as Cu(II), Zn(II) and Cd(II) by column chromatography prior to their determination by UV/vis spectrophotometry or flame atomic absorption spectrophotometry (FAAS) or inductively coupled plasma atomic emission spectroscopy (ICP-AES). Various parameters such as effect of pH on absorption, concentration of eluting agents, flow rate, total sorption capacity, exchange kinetics, preconcentration factor, distribution coefficient, breakthrough capacity and resin stability, were optimized for effective separation and preconcentration. The resin showed good ability for the separation of metal ions from binary and ternary mixture on the basis of pH of absorption and concentration of eluting agents. The newly synthesized resins showed good potential for trace enrichment of Cu(II), Zn(II) and Cd(II) metal ions, especially for Cu(II), as compared to the earlier reported resins. The synthesized resins were recycled at least 8-10 times without much affecting column sorption capacity. The presented method was successfully applied for determination of Cu(II), Zn(II) and Cd(II) in natural and ground water samples.     

Preparation and properties of a new chelating resin containing 1-nitroso-2-naphthol as the functional group

A macroreticular polystyrene-based chelating ion-exchanger containing 1-nitroso-2-naphthol as the functional group has been synthesized. The exchange-capacity of the resin for a number of metal ions such as copper(II), iron(III), cobalt(II), nickel(II), palladium(II) and uranium(VI) as a function of pH has been determined. The sorption and elution characteristics for palladium(II) and uranium(VI) have been thoroughly examined with a view to utilizing the resin for separation and concentration of uranium and palladium. Uranium(VI) has been separated from a mixture of ten other metal ions by sorption on the chelating resin and selective elution with 0.5M sodium carbonate. Palladium(II) has been separated from various metal ions by selective sorption on the resin in 1M hydrochloric acid medium.     

Chelating ion-exchangers containing n-substituted hydroxylamine functional groups: Part V. Iron,copper, and uranium separations on Duolite CS-346 resin

The separation of iron(III), copper(II) and uranyl(II) ions from a series of salt solutions by chelating ion exchange on Duolite CS-346 resin by pH control is described. Recoveries of these ions from cobalt and nickel salt solutions were quantitative. Iron may also be separated from copper by selective sorption with pH control, and uranium from iron and copper by selective desorption with sodium carbonate solution as eluent.     

Microwave Assisted Benign Method of Chelating Resin Synthesis Having Different Thermal and Ion Exchange Properties

Summary: Microwave irradiation method was used for synthesis of chelating ion exchange resin derived fom Salicylicacid-Formaldehyde-Resorcinol (SFR-M). The resin was characterized by Elemental analysis, FTIR, TGA and SEM. The Broido and Horowitz-Metzger method were used to calculate the energy of activation (Ea) from TGA. The microwave assisted chelating resin has different thermal behaviour as compared to conventional resin (SFR-C). The sorption capacities of microwave SFR resin for transition metal ions are higher than conventional SFR resin. The separation of binary mixtures [Cu (II) and Zn (II)] in brass and [Ni (II) and Cd (II)] were successfully carried out using Kd value.     

The production of 103Pd and 109Cd from a proton irradiated tandem natAg/natAg targets

This paper describes a new method for the production of ¹⁰³Pd and ¹⁰⁹Cd using the 66 MeV proton beam of iThemba LABS on a tandem natural silver target (Ag/Ag). The radiochemical separation of the Pd radionuclides (¹⁰³Pd, ¹⁰⁰Pd) from the bulk ^natAg was done using a Chelex-100 chelating resin column. The recovery of ¹⁰³Pd from the irradiated ^natAg target was found to be >98 % without any Ag or Rh impurities detected. The radiochemical separation of ¹⁰⁹Cd from the bulk ^natAg target was done by the precipitation of Ag ions by Cu followed by the separation of ¹⁰⁹Cd, traces of Ag, Cu²⁺ and Rh using a AG1-X10 anion exchange resin column. The recovery yield of ¹⁰⁹Cd was >99 % without any Ag or Rh impurities detected.     

Synthesis and efficiency of a spherical macroporous epoxy-polyamide chelating resin for preconcentrating and separating trace noble metal ions

The determination of noble metals in various materials usually requires their preconcentration and separation from other elements. In spite of the improvements in analytical instrumentation and the development of new analytical techniques such as ICP-MS, which are capable of detecting metal ions at ppt levels, the interference caused by the sample matrix still exists and is perhaps the most serious problem, making a pre-determination enrichment step necessary. Thus, the search for efficient preconcentration and separation methods is essential. A series of chelating resins that can selectively adsorb noble metal ions from aqueous solutions have been described. Functional groups, such as salicylaldoxime and thiosemicarbazide have been incorporated in cross-linked polymers or porous silica gel. These resins have very high selectivity for one or several types of noble metal ion. However, desorption of noble metals from these resins is usually difficult. Hence, the development of an adsorbent from which noble metals can be easily desorbed is needed. In this paper, a new spherical macroporous epoxy-polyamide chelating resin that met this requirement was synthesized by one step reaction. The synthesis of the resin was safe, rapid and more simple and economical than many report adsorbents. Meanwhile, the resin showed more advantages: better acid and alkali resistance; higher adsorption capacity and lower preconcentration concentrations. A resin column procedure combined with inductively coupled plasma atomic emission spectrometry (ICP-AES) for the determination of trace Rh(III), Ru(III) and Ir(IV) in real samples was established.     

Synthesis and Efficiency of an Epoxy-Urea Chelating Resin for Preconcentrating and Separating Trace Bi,In, Sn,Zr, V And Ti From Solution Samples

Abstract

A new epoxy-urea chelating resin was synthesized from epoxy resin and used for the preconcentration and separation of trace Bi(III), In(III), Sn(IV), Zr(IV), V(V) and Ti(IV) ions from solution samples. The analyzed ions can be enriched at pH 5 at a flow rate of 1–4 ml/min, and can be also desorbed with 10 mL of 2 M HCl +0.1g NH₄F solution from the resin column, with recoveries over 97%. The chelating resin reused 6 times can still adsorb quantitatively the Bi, In, Sn, Zr, V and Ti ions, and eighty to thousand-fold excesses of Ca(II), Mg(II), Cu(II), Zn(II), Al(III), Sb(III), Ni(II), Mn(II) and Fe(III) cause little interference with the enrichment and determination of these ions. The RSDs of the proposed method for the determination of 500–50 ng/ml Bi, In and Sn, 50–5.0 ng/ml Zr, V and Ti were in the range of 0.4 ～ 4.0%, the enrichment factor of the resin for the ions is in the range of 10–100. The recoveries of added standard in waste water are between 96% and 100%, and the concentration of each ion in alloy steel sample determined by the method is in good agreement with the reference value analyzed by a steel plant with average error <2.8%.     

Synthesis and properties of poly(hydroxamic acid) from crosslinked poly(methacrylate)

Poly(hydroxamic acid) chelating ion-exchange resin was prepared from crosslinked poly(methacrylate) beads. The starting polymer was prepared by a suspension polymerization of methacrylate and divinyl benzene. Conversion of the ester groups into the hydroxamic acid was carried out by treatment with hydroxylamine in an alkaline solution. Hydroxamic acid capacity of the product was 2.71 mmol/g. The resin exhibited high affinity towards Fe(III) and Pb ions and its capacities for Fe(III), Pb, Cu, Ni and Co ions were pH dependent. The ability of the resin to carry out the separation of Fe(III)CuCo/Ni and PbNi ions is also reported.     

Synthesis and Efficiency of a Spherical Macroporous Epoxy-Polyamide Chelating Resin for Preconcentrating and Separating Trace Noble Metal Ions

A new spherical macroporous epoxy-polyamide chelating resin was synthesized from epoxy resin by simple and rapid means and used for the preconcentration and separation of trace noble metal ions from solution samples. The acidity, flow rate, reusability, capacity and interference with the adsorption of ions on the resin as well as the conditions of desorption of these ions from the resin are discussed. The results show that the relative standard deviations for the determination of 50ng mL^–1 Au(III), Pt(IV) and Pd(IV) by inductively coupled plasma atomic emission spectrometry are in the range of 0.5–3.6%. The procedure was applied to determine metal smelter samples with satisfactory results.     

Solid phase extraction studies on cellulose based chelating resin for separation,pre-concentration and estimation of Cu2+and Ni2+

Chelating resins based on biopolymers, specifically cellulose, offers a green analytical method for determination of metal ions at trace levels present in various samples. It offers a fast, accurate and simple method for separation and pre-concentration of metal ions at low concentrations, prior to their determination by instrumental method. Cellulose based chelating resin (CELL-GLY) has been synthesised by immobilising glycine on it. CELL-GLY was used for the determination of trace amounts of Cu²⁺ and Ni²⁺ from aqueous solutions before their determination by FAAS. The preparation of CELL-GLY involves simple steps, based on natural and easily available biopolymer cellulose, which makes its use as chelating resin is a green method. The Cu²⁺ and Ni²⁺ can be quantitatively recovered from the CELL-GLY in the pH range 4.8–6.9 and 6.9-7.8 respectively with a recovery of more than 95% for each of these metal ions. Recovery of these metal ions using CELL-GLY was quantitative up to 35 °C. The detection limits for copper and nickel by FAAS were 1.20 ppb and 1.40 ppb, respectively. The method was successfully employed for the determination of trace amounts of Cu²⁺ and Ni²⁺ in various samples.     

CMC-Na/DETA-B62型蛇笼树脂对金属离子的吸附性能

本文研究了自合成的蛇笼型螯合树脂-二乙烯三胺交联甘油环氧树脂/羰甲基纤维素体系对Cd^2 ,Pb^2 ,Fe^2 的吸附量，吸附动力学，等温吸附过程等静态吸附性能，同时研究了pH值等因素对吸附性能的影响。实验结果表明，该树脂对Cd^2 具有较强的吸附选择性，能在Cd^2 ,Pb^2 ,Fe^2 3种离子共存时选择吸附Cd^2 ，其选择性系数分别为Kcd^2 /pb^2 =3.77,Kcd^2 /Fe^2 =9.61。该树脂对上述3种离子的吸附量可分别达4.00,1.06,0.42mmol/g。该类树脂可用于含重金属离子污水的处理和金属离子的分离等方面。     

ICP-AES determination of traces of noble metal ions pre-concentrated and separated on a new polyacrylacylaminothiourea chelating fiber

A new polyacrylacylaminothiourea chelating fiber was synthesized simply and rapidly from nitrilon (an acrylonitrile-based synthetic fiber) and aminothiourea. This fiber was used for the pre-concentration and separation of traces of AuIII, PtIV, PdIV, and IrIV ions from aqueous samples. Factors effecting and parameters for the adsorption of these ions onto the resin, such as acidity, rate, reuse, capacity, and interference of other ions, were investigated using inductively-coupled plasma atomic emission spectrometry (ICP-AES). Conditions of desorption of these ions from the resin were similarly investigated. The enrichment factor was 100. The relative standard deviation for the determination of AuIII, PtIV, PdIV, and IrIV were in the range of 0.7-3.0% for 20.0 ng/mL of each. The recoveries of a standard from real solution samples were between 96% and 100%. The concentrations of analyzed ions in a digested metal powder sample processed with the method proposed were in good agreement with the certified values.