Spectrophotometric and conductometric study of complexation of salophen and some transition metal ions in nonaqueous polar solvents

The complexation reaction between Cu(2+), Co(2+) and Ni(2+) metal cations with N,N'-bis(salicylidene)-1,2-phenylenediamine (salophen), in three nonaqueous polar solvents such as: acetonitrile (AN), dimethyl sulfoxide (DMSO), methanol (MeOH) and two binary mixtures of AN:DMSO and AN:MeOH at 25 degrees C were studied by spectrophotometric and conductometric methods. All investigated metal ions form 1:1 ML complex which their stability constants were determined and increase as Irving-Williams stability order of Co(2+)相似文献   

Study of the complex formation between 18C6 crown ether and Tl(+), Pb(2+) and Cd(2+) in binary non-aqueous solvents using differential pulse polarography

Complexation of the Tl(+), Pb(2+) and Cd(2+) ions with macrocyclic ligand 18-crown-6 (18C6) was studied in various binary solvent mixtures of propylencarbonate (PC)/dimethylformamide (DMF) and acetonitrile (AN)/dimethylsulfoxide (DMSO) systems at 22 degrees C using the differential pulse polarographic technique. The stoichiometry of the complexes was found to be 1:1 and the complexation constants increased with decreasing amounts of dimethylsulfoxide and dimethylformamide in these binary systems. In all cases, the variation of the stability constant with composition of the solvents was monotonic and showed good correlation with the inherent solvation ability of the neat solvents which form the mixture. In all of the solvent systems, the selectivity order for 18C6 complexes is Tl(+) > Pb(2+) > Cd(2+).     

A Polarographic Study of Tl + , Pb 2 and Cd 2+ Complexes with Dicyclohexano-18-Crown-6 in Some Binary Mixed Solvents

The complexes of Tl⁺, Pb²⁺ and Cd²⁺ cations with the macrocyclic ligand, dicyclohexano-18-crown-6\linebreak(DC18C6) were studied in water/methanol (H₂₊O/MeOH), water/1-propanol (H₂₊O/1-PrOH), water/acetonitrile (H₂₊O/AN), water/dimethylformamide (H₂₊O/DMF), dimethylformamide/acetonitrile (DMF/AN), dimethylformamide/methanol (DMF/MeOH), dimethylformamide/1-propanol (DMF/1-PrOH) and dimethylformamide/nitromethane (DMF/NM) mixed solvents at 22 °C using differential pulse polarography (DPP), square wave polarography and conductometry. In general, the stability of the complexes was found to decrease with increasing concentration of water in aqueous/non-aqueous mixed solvents with an inverse relationship between the stability constants of the complexes and the concentration of DMF in non-aqueous mixed solvents. The results show that the change in stability of DC18C6.Tl⁺, vs the composition of solvent in DMF/AN and DMF/NM mixed solvents is apparently different from that in DMF/MeOH and DMF/1-PrOH mixed solvents. While the variation of stability constants of the DC18C6.Tl⁺ and DC18C6.Pb²⁺ complexes vs the composition of H₂₊O/AN mixed solvents is monotonic, an anomalous behavior was observed for variations of log K_f vs the composition of H₂₊O/1-PrOH and H₂₊O/MeOH mixed solvents. The selectivity order of the DC18C6 ligand for the cations was found to be Pb²⁺ > Tl⁺ > Cd²⁺.     

Solvent influence upon complexation of N-phenylaza-15-crown-5 with UO2 2+ cation in binary mixed non-aqueous solvents

The complexation reaction of N-phenylaza-15-crown-5 (PhA15C5) with UO₂ ²⁺ cation was studied in acetonitrile–methanol (AN–MeOH), acetonitrile–butanol (AN–BuOH), acetonitrile–dimethylformamide (AN–DMF) and methanol–propylencarbonate (MeOH–PC) binary solutions, at different temperatures by conductometry method. The conductance data show that the stoichiometry of the complex formed between PhA15C5 with UO₂ ²⁺ cation in most cases is 1:1 [M:L], but in some solvent systems a 1:2 [M:L₂] complex is formed in solutions. The results revealed that, the stability constant of (PhA15C5·UO₂)²⁺ complex in the binary mixed solvents varies in the order: AN–BuOH>AN–MeOH>AN–DMF. In the case of the pure organic solvents, the sequence of the stability of the complex changes as: AN>PC>BuOH>DMF. A non-linear relationship was observed for changes of logK_f of (PhA15C5·UO₂)²⁺ complex versus the composition of the binary mixed solvents. The corresponding standard thermodynamic parameters (ΔH_c°, ΔS_c°) were obtained from temperature dependence of the stability constant. The results show that the values and also the sign of these parameters are influenced by the nature and composition of the mixed solvents.     

A thermodynamic study of complexation process between <Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>′-dipyridoxylidene(1,4-butanediamine) and Cd<Superscript>2+</Superscript> in some binary mixed solvents using conductometry

Complexation of the Cd²⁺ ion with N,N′-dipyridoxylidene(1,4-butanediamine) Schiff base was studied in pure solvents including acetonitrile (AN), ethanol (EtOH), methanol (MeOH), tetrahydrofuran (THF), dimethylformamide (DMF), water (H₂O), and various binary solvent mixtures of acetonitrile–ethanol (AN–EtOH), acetonitrile–methanol (AN–MeOH), acetonitrile–tetrahydrofuran (AN–THF), acetonitrile–dimethylformamide (AN–DMF), and acetonitrile–water (AN–H₂O) systems at different temperatures using the conductometric method. The conductance data show that the stoichiometry of complex is 1: 1 [ML] in all solvent systems. A non-linear behavior was observed for changes of log K_f of [Cd(N,N′-dipyridoxylidene(1,4-butanediamine)] complex versus the composition of the binary mixed solvents, which was explained in terms of solvent–solvent interactions. The results show that the thermodynamics of complexation reaction is affected by the nature and composition of the mixed solvents.     

Structure of iron(III) ion and its complexation with thiocyanate ion in N,N-dimethylformamide

Complexation of iron(III) with thiocyanate ions has been calorimetrically and spectrophotometrically investigated in N,N-dimethylformamide (DMF) containing 0.4 mol/dm(3) (C(2)H(5))(4)NClO(4) or 1 mol/dm(3) NH(4)ClO(4) as a constant ionic medium at 25 degrees C. Calorimetric titration data were well explained in terms of the formation of [Fe(SCN)(n)]((3-n)+) (n = 1-5), and their formation constants, reaction enthalpies and entropies were determined. Electronic spectra of individual iron(III) thiocyanato complexes were also determined. The stepwise thermodynamic quantities changed monotonously, i.e. DeltaG degrees (1) < DeltaG degrees (2) < DeltaG degrees (3) < DeltaG degrees (4), < DeltaG degrees (5), DeltaH degrees (1) > DeltaH degrees (2) > DeltaH degrees (3) > DeltaH degrees (4) > DeltaH degrees (5), DeltaS degrees (1) > DeltaS degrees (2) > DeltaS degrees (3) > DeltaS degrees (4) > DeltaS degrees (5). This suggests that no extensive desolvation occurred at any step of complexation. On the basis of these thermodynamic quantities, it is postulated that the [Fe(SCN)(n)]((3-n)+) (n = 1-5) complexes have a six-coordinate octahedral structure as well as the [Fe(dmf)(6)](3+) ion, the octahedral structure of which has been confirmed by the EXAFS (extended X-ray absorption fine structure) method.     

Study of complex formation between 18-crown-6 and diaza-18-crown-6 with uranyl cation (UO2 2+) in some binary mixed aqueous and non-aqueous solvents

The complexation reaction between UO₂ ²⁺ cation with macrocyclic ligand, 18-crown-6 (18C6), was studied in acetonitrile–methanol (AN–MeOH), nitromethane–methanol (NM–MeOH) and propylencarbonate–ethanol (PC–EtOH) binary mixed systems at 25 °C. In addition, the complexation process between UO₂ ²⁺ cation with diaza-18-crown-6 (DA18C6) was studied in acetonitrile–methanol (AN–MeOH), acetonitrile–ethanol (AN–EtOH), acetonitrile–ethylacetate (AN–EtOAc), methanol–water (MeOH–H₂O), ethanol–water (EtOH–H₂O), acetonitrile–water (AN–H₂O), dimethylformamide–methanol (DMF–MeOH), dimethylformamide–ethanol (DMF–EtOH), and dimethylformamide–ethylacetate (DMF–EtOAc) binary solutions at 25 °C using the conductometric method. The conductance data show that the stoichiometry of the complexes formed between (18C6) and (DA18C6) with UO₂ ²⁺ cation in most cases is 1:1 [M:L], but in some solvent 1:2 [M:L₂] complex is formed in solutions. The values of stability constants (log K_f) of (18C6 · UO₂ ²⁺) and (DA18C6 · UO₂ ²⁺) complexes which were obtained from conductometric data, show that the nature and also the composition of the solvent systems are important factors that are effective on the stability and even the stoichiometry of the complexes formed in solutions. In all cases, a non-linear relationship is observed for the changes of stability constants (log K_f) of the (18C6 · UO₂ ²⁺) and (DA18C6 · UO₂ ²⁺) complexes versus the composition of the binary mixed solvents. The stability order of (18C6 · UO₂ ²⁺) complex in pure studied solvents was found to be: EtOH > AN ≈ NM > PC ≈ MeOH, but in the case of (DA18C6 · UO₂ ²⁺) complex it was : H₂O > MeOH > EtOH.     

Thermodynamics of ZrO2+ cation complexation with dibenzo-18-crown-6 in mixed non-aqueous solvents

The complexation reaction of dibenzo-18-crown-6 (DB18C6) with ZrO²⁺ cation was studied in some binary solvent solutions of acetonitrile (AN), 1,2 dichloroethane (DCE), nitromethane (NM) and ethylacetate (EtOAc) with methanol (MeOH), at different temperatures by conductometry method. The stability constant of the resulting 1:1 complex at each temperature was determined using a computer fitting conductance-mole ratio data. The results revealed that, the (DB18C6·ZrO)²⁺ complex is more stable in the EtOAc–MeOH binary mixed solvents compared with the other binary mixed solvent solutions. A non-linear relationship was observed for changes of log?K_f of (DB18C6·ZrO)²⁺ complex versus the composition of the binary mixed solvents. The corresponding standard thermodynamic parameters (ΔH _c ^° , ΔS _c ^° ) were obtained from temperature dependence of the stability constant. The results show that the (DB18C6·ZrO)²⁺ complex is enthalpy destabilized but entropy stabilized and the values along with the sign of these parameters are influenced by the nature and composition of the mixed solvents.     

Complexation ability of kryptofix 22DD with lanthanum (III) cation in some binary mixed non-aqueous solvents

The complex formation between lanthanum (III) cation with kryptofix 22DD was studied in acetonitrile–dimethylformamide (AN–DMF), acetonitrile–methanol (AN–MeOH), acetonitrile–ethylacetate (AN–EtOAc) and acetonitrile–ethanol (AN–EtOH) binary solvent solutions at different temperatures by using conductometric method. The conductance data show that in all cases, the stoichiometry of the complex formed between the macrocyclic ligand and the metal cation is 1:1 [ML]. The stability order of (kryptofix 22DD.La)³⁺ complex in the studied binary solvent solutions at 25 °C was found to be: AN–EtOAc>AN–EtOH>AN–MeOH>AN–DMF and in the case of pure non-aqueous solvents at 25 °C was: EtOAc>EtOH>MeOH>AN>DMF. A non-linear behavior was observed for changes of logK_f of (kryptofix 22DD.La)³⁺ complex versus the composition of the binary mixed solvents, which was explained in terms of solvent–solvent interactions and also the preferential solvation of the species involved in the complexation reaction. The values of standard thermodynamic parameters (?H _c°, ?S _c°) for formation of (kryptofix 22DD.La)³⁺ complex were obtained from temperature dependence of the stability constant using the van’t Hoff plots.The results show that in most cases, the (kryptofix 22DD.La)³⁺ complex is enthalpy destabilized, but entropy stabilized and the values of these thermodynamic quantities for formation of the complex are quite sensitive to the nature and composition of the mixed solvents solution.     

Effect of solvent on the stability constant of complex formation and the thermodynamic parameters between dicyclohexyl-18-crown-6 with Eu3+, La3+, Er3+ and Y3+ cations

The complexation reaction between Eu³⁺, La³⁺, Er³⁺ and Y³⁺ cations with the dicyclohexyl-18-crown-6 (DCH18C6) in acetonitrile (AN)–dimethylformamide (DMF) and AN–methanol (MeOH) binary systems have been studied at different temperatures using conductometric method. The conductometric data show that the stoichiometry of the complexes is 1:1 [ML]. The results show that the stability constant of complexes in various solvents is: AN > MeOH > DMF. In the some cases, the minimum of logK_f for (DCH18C6–Eu³⁺), (DCH18C6–La³⁺), (DCH18C6–Er³⁺) and (DCH18C6–Y³⁺) complexes in AN–MeOH binary systems obtain at χ_MeOH ~ 0.75, and also, the logK_f of (DCH18C6–Er³⁺) complex in AN–DMF binary systems show a minimum at χ_AN ~ 0.75. Non-linear behavior was observed for the stability constant of complexes versus the composition of the solvent systems. The experimental data show that the selectivity order of DCH18C6 for these cations in AN–MeOH binary systems (mol% AN = 50, 75) at 25 °C is: Y³⁺ > Er³⁺ > Eu³⁺ > La³⁺. The values of thermodynamic parameters (?H?_C) for formation of complexes were obtained from temperature dependence of stability constants of complexes using the van′t Hoff plots and the standard entropy (?S?_C) were calculated from the relationship: ?G?_C, 298.15 = ?H?_C ?298.15?S?_C. The results show that the values of these thermodynamic parameters are influenced by the nature and the composition of the binary systems.     

A Polarographic Study of Tl+, Pb2+ and Cd2+ Complexes with Aza-18-crown-6 and Dibenzopyridino-18-crown-6 in some Binary Mixed Non-aqueous Solvents

The complexation of Tl⁺, Pb²⁺and Cd²⁺ cations by macrocyclic ligands, aza-18-crown-6 (L1) and dibenzopyridino-18-crown-6 (L2) was studied in some binary mixtures of methanol (MeOH), n-propanol (n-PrOH), nitromethane (NM) and acetonitrile (AN) with dimethylformamide (DMF) at 22 °C using DC (direct current) and differential pulse polarographic techniques (DPP). The stoichiometry and stability constants of the complexes were determined by monitoring the shifts in half-waves or peak potentials of the polarographic waves of metal ions against the ligand concentration. In all of the solvent systems, the stability of the resulting 1:1 complexes was found to be L1 > L2. The selectivity order of the L2 ligand for the cations was found to be Pb²⁺ > Tl⁺ > Cd²⁺ and the selectivity of the L1 ligand for Pb²⁺ ion was greater than that of Tl⁺ ion. The results show that the stability of the complexes depends on the nature and composition of the mixed solvents. There is an inverse relationship between the stability constants of the complexes and the amount of dimethylformamide in the mixed solvent systems.     

Group 9 Chalcogenometalates

The compounds [K(18-crown-6)](3)[Ir(Se(4))(3)] (1), [K(2.2.2-cryptand)](3)[Ir(Se(4))(3)].C(6)H(5)CH(3) (2), and [K(18-crown-6)(DMF)(2)][Ir(NCCH(3))(2)(Se(4))(2)] (3) (DMF = dimethylformamide) have been prepared from the reaction of [Ir(NCCH(3))(2)(COE)(2)][BF(4)] (COE = cyclooctene) with polyselenide anions in acetonitrile/DMF. Analogous reactions utilizing [Rh(NCCH(3))(2)(COE)(2)][BF(4)] as a Rh source produce homologues of the Ir complexes; these have been characterized by (77)Se NMR spectroscopy. [NH(4)](3)[Ir(S(6))(3)].H(2)O.0.5CH(3)CH(2)OH (4) has been synthesized from the reaction of IrCl(3).nH(2)O with aqueous (NH(4))(2)S(m)(). In the structure of [K(18-crown-6)](3)[Ir(Se(4))(3)] (1) the Ir(III) center is chelated by three Se(4)(2)(-) ligands to form a distorted octahedral anion. The structure contains a disordered racemate of the Deltalambdalambdalambda and Lambdadeltadeltadelta conformers. The K(+) cations are pulled out of the planes of the crowns and interact with Se atoms of the [Ir(Se(4))(3)](3)(-) anion. [K(2.2.2-cryptand)](3)[Ir(Se(4))(3)].C(6)H(5)CH(3) (2) possesses no short K.Se interactions; here the [Ir(Se(4))(3)](3)(-) anion crystallizes as the Deltalambdalambdadelta/Lambdadeltadeltalambda racemate. In the crystal structure of [K(18-crown-6)(DMF)(2)][Ir(NCCH(3))(2)(Se(4))(2)] (3), the K(+) cation is coordinated by an 18-crown-6 ligand and two DMF molecules and the anion comprises an octahedral Ir(III) center bound by two chelating Se(4)(2)(-) chains and two trans acetonitrile groups. The [Ir(Se(4))(3)](3)(-) and [Rh(Se(4))(3)](3)(-) anions undergo conformational transformations as a function of temperature, as observed by (77)Se NMR spectroscopy. The thermodynamics of these transformations are: [Ir(Se(4))(3)](3)(-), DeltaH = 2.5(5) kcal mol(-)(1), DeltaS = 11.5(2.2) eu; [Rh(Se(4))(3)](3)(-), DeltaH = 5.2(7) kcal mol(-)(1), DeltaS = 24.7(3.0) eu.     

Study of Kryptofix5 Complexation with La<Superscript>3+</Superscript> Cation in Several Individual and Binary Nonaqueous Solvents Using Conductometric Method

Complexatio of the La³⁺ cation with 1,13-bis(8-quinolyl)-1,4,7,10,13-pentaoxatridecane(Kryptofix5) was studied in pure solvents acetonitrile (AN), methanol (MeOH), nitrobenzene (NB), tetrahydrofuran (THF), methyl acetate (MeOAC) and in various binary solvent mixtures of AN–MeOH, AN–NB, AN–THF, and AN–MeOAC systems at different temperatures using the conductometric method. The stoichiometry of the complex was found to be 1 : 1 (ML). In all cases, the variation of the log kf with composition of the solvent was non-linear. This behavior is probably due to a change in the structure of these binary mixed solvents as the composition of the medium is varied. The stability order of the complex in pure nonaqueous solvents at 25°C increases in the order: AN > THF > MeOAC > MeOH > NB. The values of thermodynamic data (ΔH _c °,ΔS _c °) formation of (Kryptofix5.La)³⁺ complex are definitely solvent dependent.     

Electrochemical and thermodynamic studies of the ion-pair formation of chloropentamminecobalt(III) ion in ethyl alcohol-water media containing different dicarboxylate ligands

The ion-pair dissociation constants, K(D), of the ion-pair formed between chloropentamminecobalt(III) ion (CpX(2+)) and a variety of dicarboxylate ligands, have been determined from EMF measurements of a cell composed of glass and calomel electrodes. Measurements were made in water and in aqueous binary mixtures of ethyl alcohol, over a wide range of solvent composition (0-60 wt% ethyl alcohol), at six different temperatures (ranging from 30 to 55 degrees C at intervals of 5 degrees C). The thermodynamic parameters of association DeltaG(ass)(0), DeltaH(ass)(0) and DeltaS(ass)(0) have been calculated and discussed. DeltaH(ass)(0)-DeltaS(ass)(0), DeltaS(ass)(0)-DeltaS(1(or 2))(0), DeltaG(ass)(0)-G(1(or 2))(0) and DeltaH(ass)(0)-DeltaH(1(or 2))(0) correlations among different solvent media and different dicarboxylate ligands were examined (where 1 and 2 denote the first and the second dissociation reactions of the studied dicarboxylic acids). The pK(D) value has been correlated with the dielectric constant of the medium according to Born's equation.     

Cs NMR study of the cryptand-222-Cs complex in binary solvent mixtures

The formation constants of the cryptand-222 complex with the cesium ion were studied by ¹³³Cs NMR measurements in four binary solvent systems: acetonedimethylsulfoxide (Me₂Co---Me₂SO), acetonitrile (MeCN)---Me₂SO, propylene carbonate(PC)---Me₂SO and PC-dimethylformamide (DMF). In the neat solvents the formation constant increases in the order Me₂SO < DMF < Me₂CO < PC < MeCN, which is the inverse order of their solvating abilities as given by the Gutmann donor number. In binary mixtures the stabilities varied monotonically with the decomposition. As expected, there is no correlation between the stabilities of the complexes and the dielectric constant of the medium. It seems that, for aprotic solvents with similar Pearson basicities and in the absence of ion pair formation, the donor ability of a binary solvent mixture can be qualitatively predicted from the donicities of the two solvents and the composition of the mixture.     

Solvent influence on complex formation between Cd<Superscript>2+</Superscript> and 2-hydroxy-1,4-naphthoquinone in binary mixed nonaqueous solvents at 15–45°C

The complexation reaction of Cd²⁺ cation with 2-hydroxy-1,4-naphthoquinone (HNQ) was studied in acetonitrile (AN), 2-PrOH, ethyl acetate (EtOAc), EtOH, dimethylformamide (DMF) and in binary solutions AN–2-PrOH, AN–DMF, AN–EtOH, and AN–EtOAc using conductometric method at 15–45°C. The conductance data show that the stoichiometry of the Cd²⁺ complex with HNQ in all solvent systems is 1 : 1. In the pure solvents the stability of the complex changes in the order AN > 2-PrOH > EtOH > DMF. The stability of the complex at 25°C in the studied mixtures changes in the following order : AN?EtOAc > AN?2-PrOH > AN?EtOH > AN?DMF. These orders are affected by the nature and composition of the solvent systems and by the temperature. From the temperature dependence data, the thermodynamic functions values (ΔH° and ΔS°) for the complex formation were calculated.     

Electrophoretic mobilities of large organic ions in nonaqueous solvents: determination by capillary electrophoresis in propylene carbonate, N,N-dimethylformamide, N,N,-dimethylacetamide, acetonitrile and methanol

The mobilities of the monocharged permanent tertraphenylphosphonium cation and tetraphenylborate anion are determined by capillary zone electrophoresis in different organic solvents as a function of the ionic strength, I, of the background electrolyte. The nonaqueous solvents are propylene carbonate (PC), N,N-dimethylformamide (DMF), N,N,-dimethylacetamide (DMA), acetonitrile (MeCN) and methanol (MeOH). The ionic strength is between 5 and 50 mmol/L. The mobility as a function of I is in good agreement with the theory of Debye, Hückel and Onsager (DHO), extended by the ion size parameter as introduced by Falkenhagen and Pitts. The values of the limiting DHO slopes of the mobility vs. I curves (the slopes express the influence of the solvent on the reduction of the mobility with increase of I) decrease in the order MeCN > MeOH > DMF > DMA > PC. Absolute mobilities (obtained by extrapolation to I = 0) of a particular ion differ by a factor of about 7 between the solvents. However, constancy within 10% is observed for their Walden products (the absolute mobility multiplied with the solvent's macroviscosity). The role of dielectric friction on the mobility of the present monocharged, large analyte ions is discussed according to the theory of Hubbard and Onsager. Based on the radii of the ions, the static permittivity of the solvent and its permittivity at infinite frequency, and the relaxation time of polarization, an equal contribution of dielectric and hydrodynamic friction is predicted in MeOH as solvent. Experimental data are in contrast to this prediction, indicating the overestimation of dielectric friction, and the dominance of hydrodynamic friction on the migration of the analyte ions in all solvents under consideration.     

Nitrogen-14 NMR Study on Solvent Exchange of the Octahedral Cobalt(II) Ion in Neat 1,3-Propanediamine and n-Propylamine at Various Temperatures and Pressures. Tetrahedral-Octahedral Equilibrium of the Solvated Cobalt(II) Ion in n-Propylamine As Studied by EXAFS and Electronic Absorption Spectroscopy

Solvated cobalt(II) ions in neat 1,3-propanediamine (tn) and n-propylamine (pa) have been characterized by electronic absorption spectroscopy and extended X-ray absorption fine structure (EXAFS) spectroscopy. The equilibrium between tetrahedral and octahedral geometry for cobalt(II) ion has been observed in a neat pa solution, but not in neat diamine solutions such as tn and ethylenediamine (en). The thermodynamic parameters and equilibrium constant at 298 K for the geometrical equilibrium in pa were determined to be DeltaH degrees = -36.1 +/- 2.3 kJ mol(-1), DeltaS degrees = -163 +/- 8 J mol(-1) K(-1), and K(298) = 6.0 x 10(-3) M(-2), where K = [Co(pa)(6)(2+)]/{[Co(pa)(4)(2+)][pa](2)}. The equilibrium is caused by the large entropy gain in formation of the tetrahedral cobalt(II) species. The solvent exchange of cobalt(II) ion with octahedral geometry in tn and pa solutions has been studied by the (14)N NMR line-broadening method. The activation parameters and rate constants at 298 K for the solvent exchange reactions are as follows: DeltaH() = 49.3 +/- 0.9 kJ mol(-1), DeltaS() = 25 +/- 3 J mol(-1) K(-1), DeltaV() = 6.6 +/- 0.3 cm(3) mol(-1) at 302.1 K, and k(298) = 2.9 x 10(5) s(-1) for the tn exchange, and DeltaH() = 36.2 +/- 1.2 kJ mol(-1), DeltaS() = 35 +/- 6 J mol(-1) K(-1), and k(298) = 2.0 x 10(8) s(-1) for the pa exchange. By comparison of the activation parameters with those for the en exchange of cobalt(II) ion, it has been confirmed that the kinetic chelate strain effect is attributed to the large activation enthalpy for the bidentate chelate opening and that the enthalpic effect is smaller in the case of the six-membered tn chelate compared with the five-membered en chelate.     

The first example of a nitrile hydratase model complex that reversibly binds nitriles

Nitrile hydratase (NHase) is an iron-containing metalloenzyme that converts nitriles to amides. The mechanism by which this biochemical reaction occurs is unknown. One mechanism that has been proposed involves nucleophilic attack of an Fe-bound nitrile by water (or hydroxide). Reported herein is a five-coordinate model compound ([Fe(III)(S(2)(Me2)N(3)(Et,Pr))](+)) containing Fe(III) in an environment resembling that of NHase, which reversibly binds a variety of nitriles, alcohols, amines, and thiocyanate. XAS shows that five-coordinate [Fe(III)(S(2)(Me2)N(3)(Et,Pr))](+) reacts with both methanol and acetonitrile to afford a six-coordinate solvent-bound complex. Competitive binding studies demonstrate that MeCN preferentially binds over ROH, suggesting that nitriles would be capable of displacing the H(2)O coordinated to the iron site of NHase. Thermodynamic parameters were determined for acetonitrile (DeltaH = -6.2(+/-0.2) kcal/mol, DeltaS = -29.4(+/-0.8) eu), benzonitrile (-4.2(+/-0.6) kcal/mol, DeltaS = -18(+/-3) eu), and pyridine (DeltaH = -8(+/-1) kcal/mol, DeltaS = -41(+/-6) eu) binding to [Fe(III)(S(2)(Me2)N(3)(Et,Pr))](+) using variable-temperature electronic absorption spectroscopy. Ligand exchange kinetics were examined for acetonitrile, iso-propylnitrile, benzonitrile, and 4-tert-butylpyridine using (13)C NMR line-broadening analysis, at a variety of temperatures. Activation parameters for ligand exchange were determined to be DeltaH(+ +) = 7.1(+/-0.8) kcal/mol, DeltaS(+ +) = -10(+/-1) eu (acetonitrile), DeltaH(+ +) = 5.4(+/-0.6) kcal/mol, DeltaS(+ +) = -17(+/-2) eu (iso-propionitrile), DeltaH(+ +) = 4.9(+/-0.8) kcal/mol, DeltaS(+ +) = -20(+/-3) eu (benzonitrile), and DeltaH(+ +) = 4.7(+/-1.4) kcal/mol DeltaS(+ +) = -18(+/-2) eu (4-tert-butylpyridine). The thermodynamic parameters for pyridine binding to a related complex, [Fe(III)(S(2)(Me2)N(3)(Pr,Pr))](+) (DeltaH = -5.9(+/-0.8) kcal/mol, DeltaS = -24(+/-3) eu), are also reported, as well as kinetic parameters for 4-tert-butylpyridine exchange (DeltaH(+ +) = 3.1(+/-0.8) kcal/mol, DeltaS(+ +) = -25(+/-3) eu). These data show for the first time that, when it is contained in a ligand environment similar to that of NHase, Fe(III) is capable of forming a stable complex with nitriles. Also, the rates of ligand exchange demonstrate that low-spin Fe(III) in this ligand environment is more labile than expected. Furthermore, comparison of [Fe(III)(S(2)(Me2)N(3)(Et,Pr))](+) and [Fe(III)(S(2)(Me2)N(3)(Pr,Pr))](+) demonstrates how minor distortions induced by ligand constraints can dramatically alter the reactivity of a metal complex.     

A complexation study of 15-crown-5 with Co2+ cation in some pure and mixed organic solvents

The stability constant (log K _f) and the thermodynamic parameters (free energies, enthalpies, and entropies) of the complexation of Co²⁺ cation with 15-crown-5 (15C5) in acetonitrile-methanol (AN/MeOH), acetonitrile-nitrobenzene (AN/NB), acetonitrile-dichloromethane (AN/DCM) and acetonitrile-1,2-dichloroethane (AN/DCE) binary solvent solutions were calculated from the experimental conductance data at different temperatures. The complexation behavior of the crown ether used in these media was discussed in view of the estimated parameters. In all solvent systems, 15-crown-5 formed a 1: 1 complex with Co²⁺ cation. The stability order of (Co-15C5)²⁺ complex in the binary mixed solvents at 25°C was found to be: AN/NB > AN/DCM ≈ AN/DCE > AN/MeOH. In most cases, a non-linear relationship was observed for changes of log K _f of (Co-15C5)²⁺ complex versus the composition of the binary mixed solvent systems. The experimental results show that the standard thermodynamic parameters of the complexation process change with the nature and composition of the binary solvent solutions.