Strukturen der Alkalimetallsalze aromatischer,heterocyclischer Amide: Synthese und Struktur von Kronenether‐Addukten der Alkalimetall‐indolide

Structures of Alkali Metal Salts of Aromatic, Heterocyclic Amides: Synthesis and Structure of Crown Ether Adducts of the Alkali Metal Indolides The synthesis of five alkali metal indolide crown ether complexes is reported. Lithium‐indolide(12‐crown‐4) ( 1 ) was synthezised from butyllithium, indole, and 12‐crown‐4; sodium‐indolide(15‐crown‐5) ( 2 ) from sodium metal, indole, and 15‐crown‐5; potassium‐indolide(18‐crown‐6) ( 3 ) from potassium hydride, indole, and 18‐crown‐6. Rubidium‐ and cesium‐indolide(18‐crown‐6) ( 4 , 5 ) were made from Rb‐ and Cs‐hexamethyldisilazide, indole, and 18‐crown‐6. The structures of 2 , 4 , and 5 could be determined by X‐ray diffraction. The complexes 2 and 4 are mononuclear, the indolide anion shows an η¹(N)‐coordination to the metal cation. Complex 5 is dinuclear with a central [Cs—N—]₂‐ring.     

Polymorph of Dibenzo‐24‐Crown‐8 and its Mercury Complex

Dibenzo‐24‐crown‐8 is studied herein as a flexible ligand able to adopt different conformations, as well as for the complexation of mercury. The recrystallization of dibenzo‐24‐crown‐8 (DB24C8) from dry THF gives a new polymorphic structure of this ligand. This new structure is described and compared to the literature compound. Additionally, coordination of this ligand to mercury iodide HgI₂ is studied.     

Pentaiodide komplexer Alkalimetall‐Kronenether‐Kationen: Darstellung und strukturelle Charakterisierung der Verbindungen [M(Benzo‐15‐Krone‐5)2]I5 mit M = Na,K, Rb,Cs

Pentaiodides of Complex Alkaline Metal Crown Ether Cations: Synthesis and Structural Characterisation of the Compounds [M(benzo‐15‐crown‐5)₂]I₅, M = Na, K, Rb and Cs The isotypic compounds [M(benzo‐15‐crown‐5)₂]I₅, M = Na, K, Rb and Cs are obtained as single crystals via the reaction of benzo‐15‐crown‐5, MI and iodine (2 : 1 : 2) from ethanol/dichloromethane (1 : 1). These compounds crystallize in the monoclinic space group P2₁/n with four formula units in the unit cell. The cations form typical sandwich complexes. The volume of the unit cell increases by 4, 3 % from the sodium to the caesium compound, corresponding to the increasing space required by the cations. The pentaiodide units consist of a elongated triiodide unit and two iodine half‐molecules. These iodine molecules are completed by centres of symmetry. The interconnection between the pentaiodide units leads to the formation of zig‐zag chains that run along [001]. Considering the strongly different ionic radii of the alkali‐metal cations, the existence of this number of isotypic structures is rather surprising.     

Electrochemical Behavior of a Crown Type Polyether: 2,5,8‐Trioxa‐16,20‐Diazatricyclo[20.4.0.09,14]‐Hexacosa‐9,11,13,15,20,22,24,26‐Octaene

In this work, electrochemical behaviors of 2,5,8‐trioxa‐16,20‐diazatricyclo[20.4.0.0^9,14]‐hexacosa‐9,11,13,15,20,22,24,26‐octaene (TPO) was investigated and mechanistic study was achieved in 0.1 M tetrabutylammonium tetrafluoroborate (TBATFB) in acetonitrile on glassy carbon (GC) working electrode by cyclic voltammetry, chronoamperometry and chronocoulometry. It was estimated by ultra microelectrode (UME) that this molecule is reduced by four‐electron transfer. The reduction product adsorbed on the electrode surface, characterized by Raman spectroscopy, is a dimer. It was determined by using cyclic voltammetry that TPO is electroreduced by EC mechanism. Using digital simulation studies, EC mechanism was also indicated and the standard rate constant of the reduction step was calculated as well as the rate constants of the homogenous reaction.     

Fine‐tuning of electromembrane extraction selectivity using 18‐crown‐6 ethers as supported liquid membrane modifiers

Selectivity of electromembrane extractions (EMEs) was fine‐tuned by modifications of supported liquid membrane (SLM) composition using additions of various 18‐crown‐6 ethers into 1‐ethyl‐2‐nitrobenzene. Gradually increased transfer of K⁺, the cation that perfectly fits the cavity of 18‐crown‐6 ethers, was observed for EMEs across SLMs modified with increasing concentrations of 18‐crown‐6 ethers. A SLM containing 1% w/v of dibenzo‐18‐crown‐6 in 1‐ethyl‐2‐nitrobenzene exhibited excellent selectivity for EMEs of K⁺. The established host–guest interactions between crown ether cavities in the SLM and potassium ions in donor solution ensured their almost exhaustive transfer into acceptor solution (extraction recovery ～92%) within 30 min of EME at 50 V. Other inorganic cations were not transferred across the SLM (Ca²⁺ and Mg²⁺) or were transferred negligibly (NH₄⁺, Na⁺; extraction recovery < 2%) and had only subtle effect on EMEs of K⁺. The high selectivity of the tailor‐made SLM holds a great promise for future applications in EMEs since the range of similar selective modifiers is very broad and may be applied in various fields of analytical chemistry.     

An efficient and new protocol for the Heck reaction using palladium nanoparticle‐engineered dibenzo‐18‐crown‐6‐ether/MCM‐41 nanocomposite in water

Palladium nanoparticle‐incorporated mesoporous organosilica (MCM‐41‐Crown.Pd) was synthesized via the grafting of dibenzo‐18‐crown‐6‐ether moieties on the MCM‐41 surface, followed by reaction of the nanocomposite with palladium acetate and then its reduction in ethanol. The cavity of the immobilized dibenzo‐18‐crown‐6 as host material can stabilize the palladium nanoparticles effectively and prevent their aggregation and separation from the surface. The structure of the nanocomposite was characterized using various techniques. The catalytic properties of the nanocomposite in the Heck coupling reaction, one of the most useful transformations in organic synthesis, between aryl halides and olefins in water were also explored. The main advantages of the method are low cost, high yields, easy work‐up and short reaction time. The nanocatalyst can be easily separated from a reaction mixture and was successfully examined for seven runs, with a slight loss of catalytic activity.     

Nonmonotonic Transient Potential Signals with an 18‐Crown‐6 based Ion‐Selective Electrode in a Flow‐Injection System

The dynamic potential response of an 18‐crown‐6 based ion‐selective electrode towards Li⁺, Na⁺, K⁺ and Ca²⁺, in a flow‐injection system is studied. Different double nonmonotonic transient signals are obtained for the different ions. The influence of the flow‐injection variables and of ion concentration on the signals is studied. Two signal parameters, the relative return rates, are found to be characteristic for each ion and are constant for a concentration range of 1–3 decades. The nonmomotonic transient signals obtained are explained by reference to the theoretical models reported.     

1,10‐Diaza‐18‐crown‐ether,Modified by Phosphonate Pendant Arms – Synthesis,Structure, and Picrate Extraction Properties

Reaction of O,O′‐diisopropyl‐3‐methyl‐1,2‐butadienylphosphonate with 1,10‐diaza‐18‐crown‐6 in the presence of a catalytic amount of iPrONa leads to the new crown‐ether derivative, containing phosphonate pendant arms ( L ). The structure of the compound obtained was investigated by single crystal X‐ray diffraction analysis, IR, ¹H and ³¹P{¹H} NMR spectroscopy, and microanalysis. In the crystal structure the side arms of L are in an anti disposition relative to the macrocyclic cavity. It was established that phosphorylation of 1,10‐diaza‐18‐crown‐6 by allenylphosphonate results in an increase of extraction of NaPic and KPic, whereas LiPic and NH₄Pic are extracted practically in the same level.     

ACE applied to the quantitative characterization of benzo‐18‐crown‐6‐ether binding with alkali metal ions in a methanol–water solvent system

ACE was applied to the quantitative evaluation of noncovalent binding interactions between benzo‐18‐crown‐6‐ether (B18C6) and several alkali metal ions, Li⁺, Na⁺, K⁺, Rb⁺ and Cs⁺, in a mixed binary solvent system, methanol–water (50/50 v/v). The apparent binding (stability) constants (K_b) of B18C6–alkali metal ion complexes in the hydro‐organic medium above were determined from the dependence of the effective electrophoretic mobility of B18C6 on the concentration of alkali metal ions in the BGE using a nonlinear regression analysis. Before regression analysis, the mobilities measured by ACE at ambient temperature and variable ionic strength of the BGE were corrected by a new procedure to the reference temperature, 25°C, and the constant ionic strength, 10 mM . In the 50% v/v methanol–water solvent system, like in pure methanol, B18C6 formed the strongest complex with potassium ion (log K_b=2.89±0.17), the weakest complex with cesium ion (log K_b=2.04±0.20), and no complexation was observed between B18C6 and the lithium ion. In the mixed methanol–water solvent system, the binding constants of the complexes above were found to be about two orders lower than in methanol and about one order higher than in water.     

Liquid chromatographic resolution of racemic rasagiline and its analogues on a chiral stationary phase based on (+)‐(18‐crown‐6)‐2,3,11,12‐tetracarboxylic acid

A liquid chromatographic chiral stationary phase based on (+)‐(18‐crown‐6)‐2,3,11,12‐tetracarboxylic acid was applied to the resolution of 15 analytes, including racemic rasagiline, a chiral drug for the treatment of Parkinson's disease, and its analogues. The composition of mobile phase was optimized to be ethanol/acetonitrile/acetic acid/triethylamine (80:20:0.2:0.3, v/v/v/v) by evaluating the chromatographic results for the resolution of five selected analytes under various mobile phase conditions. Under the optimized mobile phase conditions, racemic rasagiline was resolved quite well with a separation factor of 1.48 and resolution of 2.71 and its 14 analogues were also resolved reasonably well with separation factors of 1.06–1.54 and resolutions of 0.54–2.11. Among 15 analytes, racemic rasagiline was resolved best except for just one analyte. The analyte structure–enantioselectivity relationship indicated that racemic rasagiline has the most appropriate structural characteristics for resolution on the chiral stationary phase.     

Solid‐State Binding Studies of Group 2 Metal Ions with 12‐Crown‐4

The mode of co‐ordination of 12‐crown‐4 with the heavier group(II) ions Ca²⁺, Sr²⁺ and Ba²⁺ has been studied. Size limitations of the 12‐crown‐4 ligand enforced co‐ordinated metal ions to reside above the macrocyclic plane, with the remaining co‐ordination sphere occupied by water molecules and/or counter anions, or a second crown ether ligand to form a sandwich type species. Variation of the anion, by virtue of its co‐ordinating ability, affects the structural outcome.     

Komplexe einwertiger Dibenzo‐18‐Krone‐6‐Kationen mit Triiodid als Anionen

Complexes of Monovalent Dibenzo‐18‐crown‐6 Cations with Triiodide as Anions The new polyiodides [NH₄(db18c6)]₂(I₃)₂ ( 1 ), [NH₄(db18c6)](db18c6)I₃ ( 2 ), [Na_1/2(db18c6)H₂O]₂I₃ ( 3 ), [Rb(db18c6)]I₃ ( 4 ), [Rb(db18c6)]₂(I₃)₂ ( 5 ), [Cs(db18c6)]I₃ ( 6 ), and [Cs₂(db18c6)₃][Cs(db18c6)_3/2](I₃)₃ ( 7 ) were obtained from reactions of dibenzo‐18‐crown‐6 (db18c6) and iodine with NH₄I, NaI, RbI, and CsI. Their crystal structures were determined by single‐crystal X‐ray diffraction. ( 1 ) M = NH₄, ( 5 ) M = Rb: monoclinic, P2₁/n, a = 1409,67(8), b = 2211,63(14), c = 1627,16(10) pm, β = 101,030(5)°, Z = 4 (crystal data for M = NH₄); ( 2 ): monoclinic, Pn, a = 1345,26(14), b = 773,82(4), c = 2095,10(20) pm, β = 94,439(8)°, Z = 2; ( 3 ): orthorhombic, Pnaa, a = 931,59(13), b = 2213,3(5), c = 2223,9(4) pm, Z = 4; ( 4 ): monoclinic, P2₁/n, a = 999,50(6), b = 1711,33(10), c = 1517,45(9) pm, β = 99,021(5)°, Z = 4; ( 6 ): triclinic, , a = 705,16(9), b = 1137,93(14), c = 1678,90(20) pm, α = 73,719(10), β = 79,782(10), γ = 83,669(10)°, Z = 2; ( 7 ): triclinic, , a = 1519,25(6), b = 1702,49(7), c = 2136,41(9) pm, α = 102,641(3), β = 101,989(3), γ = 91,911(3)°, Z = 2. 1 : 1 cations centered by M, [M(db18c6)]⁺, are found in the structures of ( 1 – 6 ). In contrast, the triple decker cation found in ( 7 ) is less common. The crystal structures are completed by mostly asymmetrically linear I₃^? anions.     

Synthesis and the Unique Crystal Structure of [(H2O)⊂(DB18C6)(μ2‐H2O)2/2][(H3O)⊂(DB18C6)(μ2‐H2O)2/2]I3 (DB18C6 = dibenzo‐18‐crown‐6)

In the title compound 1 , the macrocylic ligand DB18C6 arranges to build two types of channels in which either only water or water and H₃O⁺ molecules are stacked to linear polymers. The counter ions, I₃^—, also form chains and fill in the spaces left between the parallel stacks of the crown ethers. Compound 1 should therefore possess interesting conducting properties and might as well serve as model for biological water channels.     

Kristallstrukturen „supramolekularer”︁ (Benzo‐18‐krone‐6)kaliumtetrathiocyanatometallate: Ein dimerer Komplex {[K(Benzo‐18‐krone‐6)]2[Hg(SCN)4]}2 und zwei isomere Komplexe [K(Benzo‐18‐krone‐6)][Cd(SCN)3] mit kettenförmigen Trithiocyanatocadmat‐Anionen

Crystal Structures of „Supramolecular”︁ Benzo‐18‐crown‐6 Potassium Tetrathiocyanato Metallates: A Dimeric Complex {[K(Benzo‐18‐crown‐6)]₂[Hg(SCN)₄]}₂ and Two Isomeric Complexes [K(Benzo‐18‐crown‐6)][Cd(SCN)₃] Containing Trithiocyanato Cadmate Anions with Chain Structures By reaction of potassium thiocyanatomercurate(II) complexes with benzo‐18‐crown‐6 (2,3‐benzo‐1,4,7,10,13,16‐hexaoxacyclooctadec‐2‐ene) crystals of {[K(benzo‐18‐crown‐6)]₂[Hg(SCN₄)]}₂ ( 1 ) were obtained. 1 crystallizes monoclinic, space group P2₁/n (non‐standard setting of P2₁/c), a = 1737.35(2), b = 1377.16(2), c = 1984.12(3) pm, β = 100.637(1)°, Z = 2. With potassium tetrathiocyanatocadmate(II) two modifications of a complex [K(benzo‐18‐crown‐6)][Cd(SCN)₃] ( 2 , 3 ), of different symmetry were formed. 2 crystallizes monoclinic, P2₁/c, a = 1158,31(3), b = 1096,55(2), c = 2028,46(2) pm, β = 99,5261(2)°, Z = 4, 3  orthorhombic, P2₁cn, a = 1105,95(3), b = 1413,07(4), c = 1617,10(5) pm, Z = 4. 1 has a dimeric structure, built up from a dication K₂(benzo‐18‐crown‐6)₂]²⁺ and two [K(benzo‐18‐crown‐6)]⁺ cations, which are bridged by two [Hg(SCN)₄]^2– anions. In 2 and 3 triply bridged infinite [{Cd(SCN)₃^–}_n] zigzag chains, stretching along screw axes, are to be found as anions. In 2 these chains exist in two conformations related by inversion symmetry, whereas in 3 only one form can be found. [K(benzo‐18‐crown‐6)]⁺ cations are linked to the anion chains via K · · · S interactions of different lengths.