Three-dimensional coupled double-distribution-function lattice Boltzmann models for compressible Navier–Stokes equations

Two three-dimensional (3D) lattice Boltzmann models in the framework of coupled double-distribution-function approach for compressible flows, in which specific-heat ratio and Prandtl number can be adjustable, are developed in this paper. The main differences between the two models are discrete equilibrium density and total energy distribution function. One is the D3Q25 model obtained from spherical function, and the other is the D3Q27 standard lattice model obtained from Hermite expansions of the corresponding continuous equilibrium distribution functions. The two models are tested by numerical simulations of some typical compressible flows, and their numerical stability and precision are also analysed. The results indicate that the two models are capable for supersonic flows, while the one from Hermite expansions is not suitable for compressible flows with shock waves.     

Three-dimensional non-free-parameter lattice-Boltzmann model and its application to inviscid compressible flows

In this Letter, a three-dimensional (3D) lattice-Boltzmann model is presented following the non-free-parameter lattice-Boltzmann method of Qu et al. [K. Qu, C. Shu, Y.T. Chew, Phys. Rev. E 75 (2007) 036706]. A simple function, which satisfies the zeroth- through third-order moments of the Maxwellian distribution function, is introduced to replace the Maxwellian distribution function as the continuous equilibrium distribution function in 3D space. The function is then discretized to discrete-velocity directions via a 25-point Lagrangian interpolation polynomial. To simulate compressible flows with shock waves, an implicit-explicit finite-difference scheme based on the total variation diminishing flux limitation is adopted to solve the discrete Boltzmann-BGK equation in order to capture the shock waves in compressible flows with a finite number of grid points. The model is validated by its application to some typical inviscid compressible flows ranging from 1D to 3D, and the numerical results are found to be in excellent agreement with the analytical solutions and/or other numerical results.     

Finite-Difference Lattice Boltzmann Scheme for High-Speed Compressible Flow: Two-Dimensional Case

Lattice Boltzmann (LB) modeling of high-speed compressible flows has long been attempted by various authors. One common weakness of most of previous models is the instability problem when the Mach number of the flow is large. In this paper we present a finite-difference LB model, which works for flows with flexible ratios of specific heats and a wide range of Mach number, from $0$ to 30 or higher. Besides the discrete-velocity-model by Watari [Physica A 382 (2007) 502], a modified Lax--Wendroff finite difference scheme and an artificial viscosity are introduced. The combination of the finite-difference scheme and the adding of artificial viscosity must find a balance of numerical stability versus accuracy. The proposed model is validated by recovering results of some well-known benchmark tests: shock tubes and shock reflections. The new model may be used to track shock waves and/or to study the non-equilibrium procedure in the transition between the regular and Mach reflections of shock waves, etc.     

考虑转动能的一维/二维Boltzmann-Rykov模型方程数值算法

研究考虑转动能的Boltzmann-Rykov模型方程,基于转动自由度对气体分子速度分布函数矩积分,引入约化速度分布函数,应用离散速度坐标法与数值积分技术,将气体运动论模型方程化为在离散速度坐标点处关于三个约化速度分布函数的联立方程组.应用拓展计算流体力学有限差分方法,数值计算考虑转动自由度的双原子气体一维、二维Boltzmann模型方程,得到高、低Knudsen数一维激波管内流动和二维竖直平板绕流问题的流场,分析验证考虑转动能的Boltzmann-Rykov模型方程全流域统一算法求解一维/二维气体流动问题的可靠性.结果表明,气体稀薄程度与分子内自由度对流场具有较大影响,且Knudsen数较高的稀薄气体流动呈现严重的非平衡流动特点.     

Development and Comparative Studies of Three Non-Free Parameter Lattice Boltzmann Models for Simulation of Compressible Flows

This paper at first shows the details of finite volume-based lattice Boltzmann method (FV-LBM) for simulation of compressible flows with shock waves. In the FV-LBM, the normal convective flux at the interface of a cell is evaluated by using one-dimensional compressible lattice Boltzmann model, while the tangential flux is calculated using the same way as used in the conventional Euler solvers. The paper then presents a platform to construct one-dimensional compressible lattice Boltzmann model for its use in FV-LBM. The platform is formed from the conservation forms of moments. Under the platform, both the equilibrium distribution functions and lattice velocities can be determined, and therefore, non-free parameter model can be developed. The paper particularly presents three typical non-free parameter models, D1Q3, D1Q4 and D1Q5. The performances of these three models for simulation of compressible flows are investigated by a brief analysis and their application to solve some one-dimensional and two-dimensional test problems. Numerical results showed that D1Q3 model costs the least computation time and D1Q4 and D1Q5 models have the wider application range of Mach number. From the results, it seems that D1Q4 model could be the best choice for the FV-LBM simulation of hypersonic flows.     

A multiple-relaxation-time lattice Boltzmann method for high-speed compressible flows

This paper presents a coupling compressible model of the lattice Boltzmann method. In this model, the multiplerelaxation-time lattice Boltzmann scheme is used for the evolution of density distribution functions, whereas the modified single-relaxation-time(SRT) lattice Boltzmann scheme is applied for the evolution of potential energy distribution functions. The governing equations are discretized with the third-order Monotone Upwind Schemes for scalar conservation laws finite volume scheme. The choice of relaxation coefficients is discussed simply. Through the numerical simulations,it is found that compressible flows with strong shocks can be well simulated by present model. The numerical results agree well with the reference results and are better than that of the SRT version.     

A third-order finite-volume residual-based scheme for the 2D Euler equations on unstructured grids

A residual-based (RB) scheme relies on the vanishing of residual at the steady-state to design a transient first-order dissipation, which becomes high-order at steady-state. Initially designed within a finite-difference framework for computations of compressible flows on structured grids, the RB schemes displayed good convergence, accuracy and shock-capturing properties which motivated their extension to unstructured grids using a finite volume (FV) method. A second-order formulation of the FV–RB scheme for compressible flows on general unstructured grids was presented in a previous paper. The present paper describes the derivation of a third-order FV–RB scheme and its application to hyperbolic model problems as well as subsonic, transonic and supersonic internal and external inviscid flows.     

Accuracy analysis of high-order lattice Boltzmann models for rarefied gas flows

In this work, we have theoretically analyzed and numerically evaluated the accuracy of high-order lattice Boltzmann (LB) models for capturing non-equilibrium effects in rarefied gas flows. In the incompressible limit, the LB equation is shown to be able to reduce to the linearized Bhatnagar–Gross–Krook (BGK) equation. Therefore, when the same Gauss–Hermite quadrature is used, LB method closely resembles the discrete velocity method (DVM). In addition, the order of Hermite expansion for the equilibrium distribution function is found not to be directly correlated with the approximation order in terms of the Knudsen number to the BGK equation for incompressible flows. Meanwhile, we have numerically evaluated the LB models for a standing-shear-wave problem, which is designed specifically for assessing model accuracy by excluding the influence of gas molecule/surface interactions at wall boundaries. The numerical simulation results confirm that the high-order terms in the discrete equilibrium distribution function play a negligible role in capturing non-equilibrium effect for low-speed flows. By contrast, appropriate Gauss–Hermite quadrature has the most significant effect on whether LB models can describe the essential flow physics of rarefied gas accurately. Our simulation results, where the effect of wall/gas interactions is excluded, can lead to conclusion on the LB modeling capability that the models with higher-order quadratures provide more accurate results. For the same order Gauss–Hermite quadrature, the exact abscissae will also modestly influence numerical accuracy. Using the same Gauss–Hermite quadrature, the numerical results of both LB and DVM methods are in excellent agreement for flows across a broad range of the Knudsen numbers, which confirms that the LB simulation is similar to the DVM process. Therefore, LB method can offer flexible models suitable for simulating continuum flows at the Navier–Stokes level and rarefied gas flows at the linearized Boltzmann model equation level.     

Numerical Simulations of Unsteady Flows from Rarefied Transition to Continuum Using Gas-Kinetic Unified Algorithm

Numerical simulations of unsteady gas flows are studied on the basis of Gas-Kinetic Unified Algorithm (GKUA) from rarefied transition to continuum flow regimes. Several typical examples are adopted. An unsteady flow solver is developed by solving the Boltzmann model equations, including the Shakhov model and the Rykov model etc. The Rykov kinetic equation involving the effect of rotational energy can be transformed into two kinetic governing equations with inelastic and elastic collisions by integrating the molecular velocity distribution function with the weight factor on the energy of rotational motion. Then, the reduced velocity distribution functions are devised to further simplify the governing equation for one- and two-dimensional flows. The simultaneous equations are numerically solved by the discrete velocity ordinate (DVO) method in velocity space and the finite-difference schemes in physical space. The time-explicit operator-splitting scheme is constructed, and numerical stability conditions to ascertain the time step are discussed. As the application of the newly developed GKUA, several unsteady varying processes of one- and two-dimensional flows with different Knudsen number are simulated, and the unsteady transport phenomena and rarefied effects are revealed and analyzed. It is validated that the GKUA solver is competent for simulations of unsteady gas dynamics covering various flow regimes.     

A Multi-Speed Compressible Lattice-Boltzmann Model

An extension of the lattice Boltzmann BGK method to compressible flows is presented that combines three novel additions: (1) particles move density and energy weights in multiple velocity bins (11 for 1-D flow) to nearby cell centers. (2) the equilibrium distribution remains an unexpanded Maxwellian; and (3) transport and relaxation to equilibrium are performed implicitly at each node. These advances allow for the parallel modeling of high Mach number shocks and high Reynolds number flows, while avoiding advective numerical diffusion, the need for Riemann solvers, and non-linear limiters. A 1D shock tube application is shown. Generalization to higher dimensions and multi-materials are discussed.     

A high order kinetic flux-vector splitting method for the reduced five-equation model of compressible two-fluid flows

We present a high order kinetic flux-vector splitting (KFVS) scheme for the numerical solution of a conservative interface-capturing five-equation model of compressible two-fluid flows. This model was initially introduced by Wackers and Koren (2004) [21]. The flow equations are the bulk equations, combined with mass and energy equations for one of the two fluids. The latter equation contains a source term in order to account for the energy exchange. We numerically investigate both one- and two-dimensional flow models. The proposed numerical scheme is based on the direct splitting of macroscopic flux functions of the system of equations. In two space dimensions the scheme is derived in a usual dimensionally split manner. The second order accuracy of the scheme is achieved by using MUSCL-type initial reconstruction and Runge–Kutta time stepping method. For validation, the results of our scheme are compared with those from the high resolution central scheme of Nessyahu and Tadmor [14]. The accuracy, efficiency and simplicity of the KFVS scheme demonstrate its potential for modeling two-phase flows.     

一个三维多松弛时间全速域格子Boltzmann模型

构建一个既适用于低速不可压流体又适用于高速可压缩流体的三维自由参数多松弛时间格子Boltzmann模型.模型中,根据SO（3）群的不可约表述基函数构造转化矩阵,根据恢复可压Navier-Stokes方程的需要选取非守恒矩平衡值.通过von Neumann稳定性分析模型参数对数值稳定性的影响,并给出建议选择范围.模型经过基准问题的验证,模拟结果与解析解及其它数值结果符合较好.     

Simple and efficient relaxation methods for interfaces separating compressible fluids,cavitating flows and shocks in multiphase mixtures

Numerical approximation of the five-equation two-phase flow of Kapila et al. [A.K. Kapila, R. Menikoff, J.B. Bdzil, S.F. Son, D.S. Stewart, Two-phase modeling of deflagration-to-detonation transition in granular materials: reduced equations, Physics of Fluids 13(10) (2001) 3002–3024] is examined. This model has shown excellent capabilities for the numerical resolution of interfaces separating compressible fluids as well as wave propagation in compressible mixtures [A. Murrone, H. Guillard, A five equation reduced model for compressible two phase flow problems, Journal of Computational Physics 202(2) (2005) 664–698; R. Abgrall, V. Perrier, Asymptotic expansion of a multiscale numerical scheme for compressible multiphase flows, SIAM Journal of Multiscale and Modeling and Simulation (5) (2006) 84–115; F. Petitpas, E. Franquet, R. Saurel, O. Le Metayer, A relaxation-projection method for compressible flows. Part II. The artificial heat exchange for multiphase shocks, Journal of Computational Physics 225(2) (2007) 2214–2248]. However, its numerical approximation poses some serious difficulties. Among them, the non-monotonic behavior of the sound speed causes inaccuracies in wave’s transmission across interfaces. Moreover, volume fraction variation across acoustic waves results in difficulties for the Riemann problem resolution, and in particular for the derivation of approximate solvers. Volume fraction positivity in the presence of shocks or strong expansion waves is another issue resulting in lack of robustness. To circumvent these difficulties, the pressure equilibrium assumption is relaxed and a pressure non-equilibrium model is developed. It results in a single velocity, non-conservative hyperbolic model with two energy equations involving relaxation terms. It fulfills the equation of state and energy conservation on both sides of interfaces and guarantees correct transmission of shocks across them. This formulation considerably simplifies numerical resolution. Following a strategy developed previously for another flow model [R. Saurel, R. Abgrall, A multiphase Godunov method for multifluid and multiphase flows, Journal of Computational Physics 150 (1999) 425–467], the hyperbolic part is first solved without relaxation terms with a simple, fast and robust algorithm, valid for unstructured meshes. Second, stiff relaxation terms are solved with a Newton method that also guarantees positivity and robustness. The algorithm and model are compared to exact solutions of the Euler equations as well as solutions of the five-equation model under extreme flow conditions, for interface computation and cavitating flows involving dynamics appearance of interfaces. In order to deal with correct dynamic of shock waves propagating through multiphase mixtures, the artificial heat exchange method of Petitpas et al. [F. Petitpas, E. Franquet, R. Saurel, O. Le Metayer, A relaxation-projection method for compressible flows. Part II. The artificial heat exchange for multiphase shocks, Journal of Computational Physics 225(2) (2007) 2214–2248] is adapted to the present formulation.     

Generalized conservative approximations of split convective derivative operators

We propose a strategy to design locally conservative finite-difference approximations of convective derivatives for shock-free compressible flows with arbitrary order of accuracy, that generalizes the approach of Ducros et al. (2000) [1], and that can be applied as a building block of low-dissipative, hybrid shock-capturing methods. The approximations stem from application of standard central difference formulas to split forms of the convective terms in the compressible Euler equations, which guarantee strong numerical stability and (near) energy preservation in the inviscid limit. A convenient implementation of the high-order fluxes is suggested, which guarantees improved computational efficiency over existing methods. Numerical tests performed for isotropic turbulence at zero viscosity show stability of schemes with order of accuracy up to ten, and effectiveness of convective splitting of Kennedy and Gruber (2008) [2] in providing extra stability in the presence of strong density variations. Numerical simulations of compressible turbulent boundary layer flow indicate suitability of the method for non-uniform grids, and overall support superior computational efficiency of high-order schemes.     

Three-Dimensional Lattice Boltzmann Model for High-Speed Compressible Flows

A highly efficient three-dimensional (3D) Lattice Boltzmann (LB) model for high-speed compressible flows is proposed. This model is developed from the original one by Kataoka and Tsutahara [Phys. Rev. E 69 (2004) 056702]. The convection term is discretized by the Non-oscillatory, containing No free parameters and Dissipative (NND) scheme, which effectively damps oscillations at discontinuities. To be more consistent with the kinetic theory of viscosity and to further improve the numerical stability, an additional dissipation term is introduced. Model parameters are chosen in such a way that the von Neumann stability criterion is satisfied. The new model isvalidated by well-known benchmarks, (i) Riemann problems, including the problem with Lax shock tube and a newly designed shock tube problem with high Mach number; (ii) reaction of shock wave on droplet or bubble. Good agreements are obtained between LB results and exact ones or previously reported solutions. The model is capable of simulating flows from subsonic to supersonic and capturing jumps resulted from shock waves.     

A high-order low-dispersion symmetry-preserving finite-volume method for compressible flow on curvilinear grids

A new high-order finite-volume method is presented that preserves the skew symmetry of convection for the compressible flow equations. The method is intended for Large-Eddy Simulations (LES) of compressible turbulent flows, in particular in the context of hybrid RANS–LES computations. The method is fourth-order accurate and has low numerical dissipation and dispersion. Due to the finite-volume approach, mass, momentum, and total energy are locally conserved. Furthermore, the skew-symmetry preservation implies that kinetic energy, sound-velocity, and internal energy are all locally conserved by convection as well. The method is unique in that all these properties hold on non-uniform, curvilinear, structured grids. Due to the conservation of kinetic energy, there is no spurious production or dissipation of kinetic energy stemming from the discretization of convection. This enhances the numerical stability and reduces the possible interference of numerical errors with the subgrid-scale model. By minimizing the numerical dispersion, the numerical errors are reduced by an order of magnitude compared to a standard fourth-order finite-volume method.     

The Accuracy of Finite-Difference Schemes Calculating the Interaction of Shock Waves

Doklady Physics - The accuracy with which the shock-capturing finite-difference schemes calculate the flows with interaction of shock waves is studied. It is shown that, in the domains between the...     

基于格子Boltzmann方法的超声速非平衡流模拟

基于D1Q4可压缩格子Boltzmann模型,按照流通矢量分裂方法的思路,采用坐标旋转技术构造求解三维带化学反应Navier-Stokes方程对流通量求解器.结合有限体积法求解三维化学非平衡流Navier-Stokes方程,采用时间算子分裂算法解决化学反应刚性问题,数值模拟超声速化学非平衡流的三个经典算例.数值结果表明:在高马赫数下,采用D1Q4可压缩格子Boltzmann模型构造的三维对流通量求解器数值模拟中没有出现非物理解,同时在超声速化学非平衡流场中正确分辨激波、燃烧波等物理现象,精度和分辨率均较高,验证了本文构造的三维对流通量求解器的可靠性,拓宽了D1Q4可压缩格子Boltzmann模型的应用范围,为计算超声速化学非平衡流提供一种新方法.     

A Switch Function-Based Gas-Kinetic Scheme for Simulation of Inviscid and Viscous Compressible Flows

In this paper, a switch function-based gas-kinetic scheme (SF-GKS) is presented for the simulation of inviscid and viscous compressible flows. With the finite volume discretization, Euler and Navier-Stokes equations are solved and the SF-GKS is applied to evaluate the inviscid flux at cell interface. The viscous flux is obtained by the conventional smooth function approximation. Unlike the traditional gas-kinetic scheme in the calculation of inviscid flux such as Kinetic Flux Vector Splitting (KFVS), the numerical dissipation is controlled with a switch function in the present scheme. That is, the numerical dissipation is only introduced in the region around strong shock waves. As a consequence, the present SF-GKS can well capture strong shock waves and thin boundary layers simultaneously. The present SF-GKS is firstly validated by its application to the inviscid flow problems, including 1-D Euler shock tube, regular shock reflection and double Mach reflection. Then, SF-GKS is extended to solve viscous transonic and hypersonic flow problems. Good agreement between the present results and those in the literature verifies the accuracy and robustness of SF-GKS.     

High-order shock-fitting methods for direct numerical simulation of hypersonic flow with chemical and thermal nonequilibrium

In recent years, much progress has been made in the direct numerical simulation of laminar-turbulent transition of hypersonic boundary layer flow. However, most of the efforts at the direct numerical simulation of transition previously have been focused on the idealized perfect gas flow or “cold” hypersonic flows. For practical problems in hypersonic flows, high-temperature effects of thermal and chemical nonequilibrium are important and cannot be modeled by a perfect gas model. Therefore, it is necessary to include the real gas models in the numerical simulation of hypersonic boundary layer transition in order to accurately predict flow field parameters. Currently most numerical methods for hypersonic flow with thermo-chemical nonequilibrium are based on shock-capturing approach at relatively low order of accuracy. Shock capturing schemes reduce to first-order accuracy near the shock and have been shown to produce spurious oscillations behind curved strong shocks. There is a need to develop new methods capable of simulating nonequilibrium hypersonic flow fields with uniformly high-order accuracy and avoid spurious oscillations near the shock. This paper presents a fifth-order shock-fitting method for numerical simulation of thermal and chemical nonequilibrium in hypersonic flows. The method is developed based on the state-of-the-art real gas models for thermo-chemical nonequilibrium and transport phenomena. Shock-fitting approach is used because it has the advantage of capturing the entire flow field with high-order accuracy and without any oscillations near the shock. The new method has been tested and validated for a number of test cases over a wide span of free stream conditions. The developed method is applied for the study of receptivity of free stream acoustic waves over a blunt cone for hypervelocity flow. Some preliminary results of the computations of the high order shock fitting method for the above mentioned study have also been presented.