Lyoluminescence of luminol in aqueous alkaline metal hydroxides

The lyoluminescence emission spectra of luminol, induced by -irradiated NaCl in aqueous alkaline earth metal hydroxides, are recorded. Continuous emission bands are observed in the visible region from 390 to 535 nm. These emission bands on resolution showed two peaks at 430 and 460 nm, respectively in all hydroxides. An additional band of 490 appears in the case of calcium hydroxide. The colour centres released during disintegration of irradiated NaCl crystals in aqueous solution react with luminol to produce various excited molecular species, which are responsible for observed lyoluminescence of luminol.     

Effects of solvent, pH and beta-cyclodextrin on the photophysical properties of 4-hydroxy-3,5-dimethoxybenzaldehyde: intramolecular charge transfer associated with hydrogen bonding effect

The photophysical properties of 4-hydroxy-3,5-dimethoxybenzaldehyde (HDMB) in various solvents, pH and in aqueous beta-cyclodextrin (CD) have been investigated. In non-polar solvents, HDMB gives only one emission maxima; whereas, in polar solvents it shows a dual luminescence. The increase in Stokes shift with increase in polarity is much more for longer wavelength (LW) than for a shorter wavelength (SW) band. This behaviour indicates the formation of an intramolecular charge transfer (ICT) state through relaxation from the normal excited state. Especially in water, the ICT emission is further red shifted to 430 nm with the normal emission band at 330 nm and the relative fluorescence intensities between 330 nm and 430 nm emission bands are affected by the excitation wavelength. However, this excitation wavelength dependence is not large in aqueous beta-CD solutions. These results suggest that the ICT state in polar solvents/water is stabilized through exciplex formation by the hydrogen-bonding interaction between the carbonyl group and polar solvents/water. The ground and excited state pK(a) values for the neutral-monoanion equilibrium have been measured and discussed. HDMB forms a 1:1 inclusion complex with beta-CD. A mechanism is proposed to explain the inclusion process.     

Enzymeless determination of total sugar by luminol–tetrachloroaurate chemiluminescence on chip to analyze food samples

Chemiluminescence (CL) emission from luminol–tetrachloroaurate ([AuCl₄]^?) system studied in presence of monosaccharide sugars such as glucose and fructose was investigated on a microfluidic chip fabricated by the soft lithography technique. CL emission from the luminol–[AuCl₄]^? system at 430?nm was intensified remarkably by the catalytic activity of glucose and fructose at room temperature. Under optimized conditions, the CL emission intensity of the system was found to be linearly related to the concentration of the sugars. Based on this observation, nonenzymatic determination of total sugar (glucose, fructose, or hydrolyzable sucrose) was performed in a rapid and sensitive analytical method. The results revealed that the linearity ranged from 9 to 1,750?μM for glucose and 80 to 1,750?μM for fructose, with a limit of detection of 0.65 and 0.69?μM, respectively. The relative standard deviations determined at 250?μM based on six repetitive injections were 1.13 and 1.15?% for glucose and fructose, respectively. The developed method was successfully applied for determination of the total sugar concentration in food and beverages.

Photobleaching of Arterial Fluorescent Compounds: Characterization of Elastin, Collagen and Cholesterol Time-resolved Spectra during Prolonged Ultraviolet Irradiation

To study the photobleaching of the main fluorescent compounds of the arterial wall, we repeatedly measured the time-resolved fluorescence of elastin, collagen and cholesterol during 560 s of excitation with nitrogen laser pulses. Three fluence rate levels were used: 0.72, 7.25 and 21.75 microW/mm2. The irradiation-related changes of the fluorescence intensity and of the time-resolved fluorescence decay constants were characterized for the emission at 390, 430 and 470 nm. The fluorescence intensity at 390 nm decreased by 25-35% when the fluence delivered was 4 mJ/mm2, a common value in fluorescence studies of the arterial wall. Cholesterol fluorescence photobleached the most, and elastin fluorescence photobleached the least. Photobleaching was most intense at 390 nm and least intense at 470 nm such that the emission spectra of the three compounds were markedly distorted by photobleaching. The time-resolved decay constants and the fluorescence lifetime were not altered by irradiation when the fluence was below 4 mJ/mm2. The spectral distortions associated with photobleaching complicate the interpretation of arterial wall fluorescence in terms of tissue content in elastin, collagen and cholesterol. Use of the time-dependent features of the emission that are not altered by photobleaching should increase the accuracy of arterial wall analysis by fluorescence spectroscopy.     

FLUORESCENCE OF HOUSEFLY VISUAL PIGMENT

Abstract —The fluorescence of housefly photoreceptors was studied in vivo by using the deep pseudopupil technique. Whereas the rhodopsin R490 of the peripheral retinular cells fluoresces negligibly the metarhodopsin M580 fluoresces distinctly in the red. The newly discovered metarhodopsin M'is produced by intense blue light and can be reconverted into rhodopsin by intense long wavelength light. M'also fluoresces in the red; its excitation spectrum and emission spectrum peak at _max= 570 and 660 nm respectively.
Intense ultraviolet light irreversibly reduces the visual pigment fluorescence as well as the broad band autofluorescence (kmnx 470 nm) originating from non-visual pigments in the fly's eye.     

Fluorescence of phthalocyanines: Emission from an upper excited state

The weak (φ_f < 10³) fluorescence at around 430 nm of the S² upper excited singlet state of metal-free phthalocyanine and metallophthalocyanines is presented. Polarization measurements indicate that the emission is short-lived (< 800 ps) contrary to the intense (φ_f > 0.3) normal emission at around 700 nm originating from S¹ and having a lifetime in the 4.1 to 10.6 ns range, depending on the solvent. The short wavelength emitting S² excited state has been populated by a two photon absorption process using the excitation light at 695 nm of a pulsed ruby laser. This process is shown not to involve the triplet state but the following stepwise two photon absorption process: .     

Fluorescent 6‐hydroxy‐ and 6,7‐dihydroxy‐4‐trifluoro‐methylcarbostyrils and formation of o‐carboxymethylated derivatives via o‐succinimide esters

Stepwise demethylation of fluorescent 6,7‐dimethoxy‐3‐trifluoromethylcarbostyrils 5 leads to 6‐hydroxy derivatives 6 and 6,7‐dihydroxyderivative 7 . Phenolate formation shifts excitation and emission maxima from 370 and 430 nm to 430 and 480 nm for the anion of 6 and as far as 500 and 580 nm for the dianion of 7 . Dependence of fluorescence quantum yield on media and polar structure, varying from 0.02 to 0.51, is discussed. O‐Alkylation of 6 with alkyl bromoacetate yields esters of type 8 in good yield. Reactive succinimidoyl (OSu) esters of type 11 were prepared after saponification to acids 9 . With amino acids or their esters, peptides and aminoglucose, linking to labeled derivatives 13 or 15 could be achieved under mild conditions in slightly basic aqueous media.     

Photophysics and optical limiting of platinum(II) 4'-arylterpyridyl phenylacetylide complexes

A series of platinum(II) 4'-aryl-2,2':6',2' '-terpyridyl phenylacetylide complexes (5-8) with 4'-naphthyl, 4'-phenanthryl, 4'-anthryl, and 4'-pyrenyl substituents have been synthesized and characterized. The emission properties of these complexes and their corresponding platinum(II) 4'-aryl-2,2':6',2' '-terpyridyl chloride complexes (1-4) at room temperature and 77 K have been systematically investigated. Except for the 4'-pyrenyl-2,2':6',2' '-terpyridyl phenylacetylide complex that emits from an admixing state consisting of metal-to-ligand charge-transfer (3MLCT), intraligand charge-transfer (3ILCT), and 3pi,pi characters, emissions of 4'-naphthyl, 4'-phenanthryl, and 4'-anthryl-2,2':6',2' '-terpyridyl phenylacetylide complexes all originate from a 3MLCT-dominant state. The emission lifetime of the 4'-pyrenyl-2,2':6',2' '-terpyridyl phenylacetylide complex (8) is longer than 2 mus at room temperature, and more than 300 mus at 77 K, while the other three complexes possess an emission lifetime of 200-400 ns at room temperature and tens of microseconds at 77 K. Replacing the chloride ligand in the 4'-naphthyl, 4'-phenanthryl, and 4'-anthryl-2,2':6',2' '-terpyridyl chloride complexes by a phenylacetylide ligand significantly increases the emission efficiency by an order of magnitude, and the emission lifetimes become longer. In contrast, such an alternation has no pronounced effect on the emission efficiency and lifetime of the 4'-pyrenyl-2,2':6',2' '-terpyridyl complexes. In the transient difference absorption (TA) spectra of 5 and 6, a moderately intense absorption band from 470 to 830 nm and a bleaching band between 400 and 470 nm were observed. For 7, the TA spectrum features a narrow, weak bleaching band at approximately 380 nm and a strong, narrow band at approximately 420 nm, as well as a broad, structureless band from 470 to 750 nm. In addition, a fourth, positive band appears above 800 nm. Complex 8 exhibits a strong, narrow bleaching band at approximately 340 nm and a broad, positive band extending from 370 to 830 nm, with the band maximum appearing at approximately 520 nm. The lifetimes obtained from the kinetic transient absorption measurement coincide with those from the kinetic emission measurement, indicating that the transient absorption originates from the same excited state that emits or, alternatively, from a state that is in equilibrium with the emitting state. All complexes exhibit optical limiting for 4.1 ns laser pulses at 532 nm, with 8 giving rise to the strongest optical limiting, presumably because of the much longer triplet excited-state lifetime and the stronger transient absorption at 532 nm.     

Dosimetric application of lyoluminescence using some saccharides

A measurement system for lyoluminescence has been constructed using a photon-counting apparatus equipped with a highly sensitive photomultiplier and a microcomputer for a data acquisition and processing. For the lyoluminescent dosimetry, seven saccharide samples, including five monosaccharides (glucose, mannose, galactose, levulose and ribose) and two disaccharides (sucrose and trehalose), were irradiated with 60Co gamma rays. Effects on lyoluminescence were examined of the amounts of the sample, concentration of luminol phosphor in an aqueous solution, elapsed time after mixing the samples in the solution, variations of absorbed doses, annealing treatments and different radiation fields. The results revealed that relatively small amounts of sample, say 3 mg, is sufficient for reproducible routine analyses by using 125 mg luminol/l for 10 s data accumulation, and that the lyoluminescent dosimetry is useful for the significantly high dose regions of 1Gy-10kGy (the use of galactose and trehalose can extend the dose-region to higher levels). The comparison of sensitivity for samples with the same dose (215 Gy) showed the great luminescent changes over one order of magnitude between the highest value for galactose and lowest one for ribose, although there is no substantial difference in the structure. No meaningful radiation-quality effect was observed for monosaccharides irradiated with gamma-rays, X-rays, and neutrons.     

Spectrophotometric method for phosphine residue determination in coriander

Spectrophotometric method for the determination of phosphine (PH₃) residues in coriander has been developed based on the reaction of phosphine with silver nitrate in 2% aqueous isopropanol. The yellow chromophore formed has an absorption maximum at 430 nm and the linear relation between the absorbances at 430 nm and the concentration of PH₃ is obeyed in the range of 0.02 to 0.17 g. The method is sensitive with a detection limit of 0.008 g and can be applied for determination of 0.02 g/g residue in coriander. Recovery of added PH₃ from a closed system ranges from 96 to 101%.     

Synthesis and chirooptical properties of some tertiary amines containing a pyridine ring

Tertiary amines of the pyridine series containing an -phenylethylamine residue have been synthesized. The IR spectra and circular dichroisms of these amines have been measured in the 400–200 nm interval, and an assignment of the bands has been made. It is suggested that the long-wave absorption band in the 315 nm region for N-methyl-N-[2-(pyridin-2-yl) ethyl]--phenylethylamine and the Cotton effect corresponding to it are due to an intramolecular CTC.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 1, pp. 92–96, January, 1984.     

Highly selective mercury(II) cations detection in mixed-aqueous media by a ferrocene-based fluorescent receptor

A new chemosensor molecule 3 based on a ferrocene-imidazophenanthrophenazine dyad effectively recognizes Hg(2+) in an aqueous environment through three different channels. Upon recognition, an anodic shift of the ferrocene-ferrocenium oxidation potential (ΔE(1/2) = 240 mV) and a progressive red shift (Δλ = 17 nm) of the low energy band in its absorption spectrum is produced. The emission spectrum of 3 in an aqueous environment, CH(3)CN-EtOH-H(2)O (65:25:10), and conducted at pH = 7.4 (20 × 10(-3) M HEPES) (Φ = 0.003), is perturbed after addition of Hg(2+) cations and an intense and structureless red shift emission band at 494 nm (Δλ = 92 nm) appeared along with an increase of the intensity of the emission band (CHEF = 77), the quantum yield (Φ = 0.054) resulted in a 18-fold increase. The combined (1)H NMR data of the complex and the theoretical calculations suggest the proposed bridging coordination mode.     

Enhanced chemiluminescence of the luminol–KIO4 system by ZnS nanoparticles

The chemiluminescence (CL) intensity of the luminol–KIO₄ system is strongly enhanced by addition of zinc sulfide nanoparticles (ZnS-NPs) capped with 3-mercaptopropionic acid. On injection of fluoroquinolones into the luminol–KIO₄–ZnS–NP system, CL intensity is substantially increased. The CL emission peaks at 430 nm, thus indicating that the luminophore is 3-aminophthalate. The enhancement effect is attributed to a catalytic effect of the ZnS-NPs, which is assumed to accelerate the electron transfer process and to facilitate radical generation. Based on theses findings, a sensitive CL assay was developed for several fluoroquinolones.     

Triplet states of humic acids studied by laser flash photolysis using different excitation wavelengths

The spectra and kinetics of short-lived intermediates formed from aqueous (0.1 N NaOH) solutions of the natural mixture of humic and fulvic acids (HFA) were studied by laser flash photolysis using excitation wavelengths of 337, 390, 470, and 520 nm. Laser photolysis of HFA with light of 520 and 470 nm results in the formation of triplet excited states (T_HFA) characterized by the broad absorption spectrum with a maximum near 630 nm and lifetimes of 0.15 ms in deoxygenated solutions. The formation of two types of T_HFA with lifetimes of 0.1 and 2 ms and absorption spectra with maxima at 570 nm is observed under photolysis with light of 337 and 390 nm. The estimation of quantum yields of T_HFA gives 1 and 0.3% under photolysis with excitation wavelengths of 337 and 520 nm, respectively. The rate constants of T_HFA quenching by molecular oxygen are equal to (7—8)·10⁸ L mol^–1 s^–1.     

Fluorescent detection of amidinium-carboxylate and amidinium formation using anthracene-based diamidine: an application for the analysis of dicarboxylic acid binding

An anthracene-based diamidine (1) ‘turn-on’ fluorescent probe for the detection of dicarboxylic acids has been designed and synthesized. The fluorescence spectra of the diamidine 1 with carboxylic acids that showed two different fluorescence bands, which corresponded to the amidinium-carboxylate (λ_em=430-440 nm), and amidinium (λ_em=460-470 nm as a broad band) formation, were confirmed by DOSY NMR and TD-DFT calculations. These different fluorescence bands showed the binding mode of carboxylic acids and the stability of formed complexes toward diamidine 1. The fluorescent detection of amidinium-carboxylate formation using diamidine 1 was applicable to the detection of α,ω-dicarboxylic acids (C₆-C₁₃) and succeeded in the detection of α,ω-dicarboxylic acid (adipic acid) in human urine.     

13-Hydroxyacenaphato[1,2-b]quinolizinium bromide as a new flouorescence indicator

13-Hydroxyacenaphtho[1,2-b]quinolizinium bromide (13-HQBr)was selected as a fluorescence indicator to determine basic compounds in non-aqueous media. This compound possesses an acidic phenolic hydroxyl group. It presents varying absorption (ROH, 408, 430 nm; RO(-) 456, 478 nm) and excitation spectra (ROH, 425 nm; RO, 471 nm) depending on the pH of the media, but the same emission fluorescence spectrum (ROH = RO(-), 526 nm) at different pH in buffered aqueous solutions. However, in acidic non-aqueous media (acetic, formic and trifluoroacetic acids), it can be observed that the fluorescence emission spectra differ for the ionized (lambda(em) = 530 nm) and non-ionized (lambda(em) = 440, 470 nm) forms. The fluorescence intensity at the characteristic peaks depends on the acid-base equilibria in the ground and excited states. Therefore, this property could be used to evaluate the concentration of basic compounds, showing a good linearity range between fluorescence intensity and basic sample concentration.     

Spectrofluorimetric determination of guanethidine sulphate,guanfacine hydrochloride,guanoclor sulphate and guanoxan sulphate in tablets and biological fluids,using benzoin

A sensitive and rapid Spectrofluorimetric method for the determination of guanethidine sulphate, guanfacine hydrochloride, guanoclor sulphate and guanoxan sulphate in tablets and spiked human serum and urine samples is described. The method is based on the reaction of monosubstituted guanidino compounds in an aqueous potassium hydroxide solution with benzoin, in the presence of -mercaptoethanol and sodium sulphite. Highly fluorescent derivatives were obtained, with excitation and emission maximum wavelengths around 325 and 430 nm, respectively. In optimal reaction conditions, the linearity ranges were 0.04–0.28 g/ml, with relative standard deviations less than 2%. The method has been successfully applied to the determination of these drugs in tablets. The results are highly correlated with the B.P. method. Chloroform (or for guanoxan dichloromethane) was used to extract the drugs from serum and urine at basic pH, followed by the proposed fluorimetric method. The limit of detection is 0.02 g/ml for the selected drugs.     

Modulated potential electrogenerated chemiluminescence of luminol and Ru(bpy) 3 2+

Chemiluminescence emission intensity is modulated by modulating the potential of a working electrode which is used to generate a key species in the electrogenerated Chemiluminescence (ECL) reaction. The emission is monitored synchronously using a lock-in amplifier. The reactions used in the characterization are luminol with hydrogen peroxide and tris(2,2-bipyridyl)ruthenium (II) (or Ru(bpy) ₃ ²⁺ ) with oxalate. Modulation widths of ± 50 mV yield maximum signals for luminol when centered at 0.45 V (vs Ag/AgCl) and for Ru(bpy) ₃ ²⁺ when centered at 1.05 V. The resulting signal decreases with increasing modulation frequency and shows that luminol/H₂O₂ is a faster ECL system than Ru(bpy) ₃ ²⁺ /oxalate. Working curves for luminol and for oxalate have essentially the same linear range and slope with the modulated potential approach as with a DC electrode potential. This approach provides capability for differentiating the analytical signal from constant background emission or stray light.     

Influence of amines and alkanethiols on the spectral and luminescent properties of InP@ZnS colloidal quantum dots

It has been shown that the precursors (long-chain amines and alkanethiols) used in liquid-phase colloidal synthesis of InP@ZnS quantum dots exert a significant influence on their spectral and luminescent properties. It has been found that dodecylamine and 1-dodecanethiol facilitate obtaining the particles with a narrow luminescence band and a low quantum yield, whereas oleylamine, 1-octanethiol, and 1,6-hexanedithiol stimulate the formation of the quantum dots with broad and intense luminescence. Conditions have been found under which the narrowing of the emission band to 46.3 nm becomes possible.     

SPECTRAL ANALYSES OF LOW LEVEL CHEMILUMINESCENCE OF A SHORT LIFETIME USING A HIGHLY SENSITIVE POLYCHROMATIC SPECTROMETER INCORPORATING A TWO DIMENSIONAL PHOTON-COUNTING TYPE DETECTOR

Abstract— Spectral analyses of low level chemiluminescence were carried out by using a newly developed polychromatic spectrometer in which a diffracted photon emission was detected simultaneously using a two dimensional photon-counting device. The spectrometer was sensitive in the 400–800 nm wavelength range. Low level chemiluminescence generated in a 1 nM luminol solution could be detected as a spectrum, showing a peak at 430 nm. Short lifetime photon emission from singlet oxygen showed only two peaks at around 630 and 700 nm in this highly time-resolved spectroscopy. Lipid peroxidation of linoleic acid by the lipoxygenase emitted a low intensity peak centered at 440 nm, but singlet oxygen emission arising from the decomposition of lipid peroxide was not observed. An injured cotyledon of a soybean seedling gave a broad emission centered at 725 nm in the absence of hydrogen peroxide, while in its presence a different emission peak appeared at a shorter wavelength (515 nm). Oxygenated, fluorescent components in the soybean seedling may be the emitting species. Singlet oxygen and triplet carbonyl groups were shown to be unlikely sources of the emission.