New doped Li-M-Mn-O (M = Al, Fe, Ni) spinels as cathodes for rechargeable 3 V lithium batteries

The electrochemical behaviour of new doped Li-M-Mn-O (M = Al, Fe, Ni) spinel oxides in liquid electrolyte lithium cells was studied. The insertion electrode materials were obtained by heating stoichiometric amounts of thoroughly mixed LiOH and M _x Mn_{1− x} CO₃ (M = Fe, Ni; x = 0.08−0.15) or Al _x Mn_{1− x} (CO₃) (OH) _y , in the case of Al, at 380 °C in air for 20 h. The transition metal-doped samples, particularly those containing Ni or obtained at low temperatures, where the resulting spinel was cation-deficient and highly disordered, exhibited the best cycling performance in the potential window 3.3−2.3 V. Cell capacity was retained by 80% after 200 cycles. Capacity fading was observed on increasing the firing temperature, together with improved crystallinity and the disappearance of cation vacancies. This impaired electrochemical behaviour is ascribed to a Jahn-Teller effect, which induces an X-ray-detectable cubic-tetragonal phase transition upon lithium insertion. The phase transition was undetectable in the low-temperature samples. The influence of the Jahn-Teller distortion is thus seemingly lessened by a highly disordered structure. Received: 25 November 1997 / Accepted: 28 January 1998     

Thermal Investigations of M[La(C2O4)3]⋅xH2O (M=Cr(III) and Co(III))

The complexes M[La(C₂O₄)₃]⋅xH₂O (x=10 for M=Cr(III) and x=7 forM=Co(III)) have been synthesized and their thermal stability was investigated. The complexes were characterized by elemental analysis, IR, reflectance and powder X-ray diffraction (XRD) studies. Thermal investigations using TG, DTG and DTA techniques in air of chromium(III)tris(oxalato)lanthanum(III)decahydrate, Cr[La(C₂O₄)₃]⋅10H₂O showed the complex decomposition pattern in air. The compound released all the ten molecules of water within ∼170°C, followed by decomposition to a mixture of oxides and carbides of chromium and lanthanum, i.e. CrO₂, Cr₂O₃, Cr₃O₄, Cr₃C₂, La₂O₃, La₂C₃, LaCO, LaCrO_x (2<x<3) and C at ∼1000°C through the intermediate formation of several compounds of chromium and lanthanum at ∼374, ∼430 and ∼550°C. Thecobalt(III)tris(oxalato)lanthanum(III)heptahydrate, Co[La(C₂O₄)₃]⋅7H₂O becomes anhydrous around 225°C, followed by decomposition to Co₃O₄, La₂(CO₃)₃ and C at ∼340°C and several other mixture species of cobalt and lanthanum at∼485°C. The end products were identified to be LaCoO₃, Co₃O₄, La₂O₃, La₂C₃, Co₃C, LaCO and C at ∼ 2>1000°C. DSC studies in nitrogen of both the compounds showed several distinct steps of decomposition along with ΔH and ΔSvalues. IR and powder XRD studies have identified some of the intermediate species. The tentative mechanisms for the decomposition in air are proposed. This revised version was published online in August 2006 with corrections to the Cover Date.     

A note regarding the rate-determining step of reduction of solid manganates(V)

Potential pulse chonoamperometry was applied to immobilized microparticles of manganates(V) and MnO₂ in order to compare the nature of the rate determining step in their reduction. Manganates(V) were found to be reduced by an irreversible one-electron surface reaction, whereas MnO₂ reduction is controlled by a reversible reaction coupled to solid-state diffusion. The key importance of the coordination preferences of reacting metal ions on the surface layer of the solid particles is also discussed with respect to known mechanisms of electrochemical dissolution of Fe and Cr oxides. Received: 22 May 1998 / Accepted: 3 July 1998     

Improvement of high-voltage cycling behavior of Li(Ni1/3Co1/3Mn1/3)O2 cathodes by Mg, Cr, and Al substitution

To improve the electrochemical properties of Li[Ni_1/3Co_1/3Mn_1/3]O₂ at high charge end voltage (4.6 V), a series of the mixed transition metal compounds, Li(Ni_1/3Co_{1/3 − x} Mn_1/3M _x )O₂ (M = Mg, Cr, Al; x = 0.05), were synthesized via hydroxide coprecipitation method. The effects of doping Mg, Cr, and Al on the structure and the electrochemical performances of Li[Ni_1/3Co_1/3Mn_1/3]O₂ were compared by means of X-ray diffraction (XRD), scanning electron microscopy (SEM), galvanostatic charge–discharge tests, and electrochemical impedance spectroscopy. The XRD results show that all the samples keep layered structures with R3m space group as the Li[Ni_1/3Co_1/3Mn_1/3]O₂. SEM images show that all the compounds have spherical shapes and the Cr-doped sample has the largest particle size. Furthermore, galvanostatic charge–discharge tests confirm that the Cr-doped electrode shows improved cycling performance than the undoped material. The capacity retention of Li(Ni_1/3Co_{1/3 − 0.05}Mn_1/3Cr_0.05)O₂ is 97% during 50 cycles at 2.8∼4.6 V. The improved cycling performance at high voltage can be attributed to the larger particle size and the prevention of charge transfer resistance (R _ct) increase during cycling.     

Effect of the ZnNi y Mn2– y O4 (0 ≤ y ≤ 1) spinel composition on electrochemical lithium insertion

The electrochemical insertion of lithium in the spinel-type manganite with the formula ZnNi _y Mn_{2– y} O₄ has been studied. The galvanostatic discharge curves show that the best performance is obtained for y = 0.25, where a tetragonal to cubic structural transformation occurs. The thermodynamics and kinetics of the process of insertion of the lithium into the tetragonal spinel Li _x ZnNi_0.25Mn_1.75O₄ (x = 0.05–1.3) have been studied. The molar thermodynamic quantities, such as enthalpy, entropy and free energy determined by EMF-T measurements, varied with the lithium concentration in the oxide structure, and a major variation was observed around x = 0.8. The chemical diffusion coefficient of lithium in these spinels was also determined. Structural analysis, degree of oxidation and magnetic susceptibility measurements were carried out for the lithiated oxides in order to obtain the cationic distribution as a function of x. It has been possible to demonstrate that, upon lithium insertion, Mn⁴⁺ ions on B sites are reduced to Mn³⁺ and then to Mn²⁺. A cooperative Jahn-Teller effect is present in these spinel manganese-nickel oxides. Received: 4 February 1997 / Accepted: 11 April 1997     

Phenomenological kinetics of irreversible electrochemical dissolution of metal-oxide microparticles

The electrochemical dissolution of metal oxides and other stable solid phases composed of nano- to micro-crystalline particles is generally a complex process. It can be simplified by distinguishing two main contributions to the reactivity of the solid: the potential-dependent rate coefficient k(E), and the conversion-dependent function f(y). These contributions can be evaluated by a combination of potentiostatic and potentiodynamic experiments. Both k(E) and f(y) were obtained experimentally for the dissolution of iron and chromium oxides, and theoretical consequences of their particular forms are discussed. A peak-shaped function k(E) was observed in the case of γ-Fe₂O₃, whereas, for α-Cr₂O₃ and CrO₂, a different model based on intermediate surface complexes is proposed. This model also explains the complete electrochemical dissolution of metal oxides regardless of their low intrinsic electric conductivity. Received: 2 July 1997 / Accepted: 3 November 1997     

Ionic conduction of lithium for Perovskite-type compounds, Li x La(1− x )/3NbO3 and (Li0.25La0.25)1− x Sr0.5 x NbO3

Perovskite-type compounds, Li _x La_{(1− x )/3}NbO₃ and (Li_0.25La_0.25)_{1− x} Sr_{0.5 x} NbO₃ as lithium ionic conductors, were synthesized by a solid-state reaction. From powder X-ray diffraction, the solid solution ranges of the two compounds were determined to be 0≤x≤0.25 and 0≤x≤0.125, respectively. In the Li _x La_{(1− x )/3}NbO₃ system, the ionic conductivity of lithium at room temperature, σ₂₅, exhibited a maximum value of 4.7 × 10⁻⁵ S · cm⁻¹ at x = 0.10. However, because of the decrease in the lattice parameters with increasing Li concentration x˙, σ₂₅ of the samples decreased with increasing x from 0.10 to 0.25. Also, in the (Li_0.25La_0.25)_{1− x} Sr_{0.5 x} NbO₃ system, the lattice parameter increased with the increase of Sr concentration and the σ₂₅ achieved a maximum (7.3 × 10⁻⁵ S · cm⁻¹ at 25 °C) at x = 0.125. Received: 12 September 1997 / Accepted: 15 November 1997     

Carbon Dioxide Reforming of Methane over Ni Catalysts Supported on Al2O3 Modified with La2O3, MgO, and CaO

The preparation of synthesis gas from carbon dioxide reforming of methane (CDR) has attracted increasing attention. The present review mainly focuses on CDR to produce synthesis gas over Ni/MO_x/Al₂O₃ (X = La, Mg, Ca) catalysts. From the examination of various supported nickel catalysts, the promotional effects of La₂O₃, MgO, and CaO have been found. The addition of promoters to Al₂O₃-supported nickel catalysts enhances the catalytic activity as well as stability. The catalytic performance is strongly dependent on the loading amount of promoters. For example, the highest CH₄ and CO₂ conversion were obtained when the ratios of metal M to Al were in the range of 0.04–0.06. In the case of Ni/La₂O₃/Al₂O₃ catalyst, the highest CH₄ conversion (96%) and CO₂ conversion (97%) was achieved with the catalyst (La/Al = 0.05 (atom/atom)). For Ni/CaO/Al₂O₃ catalyst, the catalyst with Ca/Al = 0.04 (atom/atom) exhibited the highest CH₄ conversion (91%) and CO₂ conversion (92%) among the catalysts with various CaO content. Also, Ni/MgO/Al₂O₃ catalyst with Mg/Al = 0.06 (atom/atom) showed the highest CH₄ conversion (89%) and CO₂ conversion (90%) among the catalysts with various Mg/Al ratios. Thus it is most likely that the optimal ratios of M to Al for the highest activities of the catalysts are related to the highly dispersed metal species. In addition, the improved catalytic performance of Al₂O₃-supported nickel catalysts promoted with metal oxides is due to the strong interaction between Ni and metal oxide, the stabilization of metal oxide on Al₂O₃ and the basic property of metal oxide to prevent carbon formation.     

The Effect of Ge,Ni, and Fe Doping on the Ga Activity in the CoGa B2 Phase

Summary. Gallium activity in the B2 (CsCl-type) phase of ternary Co–Ga–X (X = Ge, Ni, and Fe) alloys was measured by the EMF method with a stabilized zirconia solid electrolyte. The temperature range was 1050–1250 K and the concentrations of the added elements were 2–6 at-% Ge and Ni, and 1–3 at-% Fe. The reference electrodes were Fe,Fe_xO or Ga,Ga₂O₃. The effect on the activity of gallium in the B2 phase with the addition of other elements was found to be the largest with Ge and the smallest in the case of Ni.     

The Effect of Ge, Ni, and Fe Doping on the Ga Activity in the CoGa B2 Phase

Gallium activity in the B2 (CsCl-type) phase of ternary Co–Ga–X (X = Ge, Ni, and Fe) alloys was measured by the EMF method with a stabilized zirconia solid electrolyte. The temperature range was 1050–1250 K and the concentrations of the added elements were 2–6 at-% Ge and Ni, and 1–3 at-% Fe. The reference electrodes were Fe,Fe_xO or Ga,Ga₂O₃. The effect on the activity of gallium in the B2 phase with the addition of other elements was found to be the largest with Ge and the smallest in the case of Ni.     

Oxygen stoichiometry,unit cell volume,and thermodynamic quantities of perovskite-type oxides

Perovskite-type oxides with A, A′=La, Ba, Sr; B, B′=Mn, Fe, Co were investigated by means of thermal analysis, solid electrolyte cells, and X-ray diffraction. Partial molar thermodynamic quantities are determined and their relations with O/M stoichiometry, unit cell volume, and phase stability were studied. The absolute values of partial molar enthalpies of perovskite-type oxides increase with increasing O/M stoichiometries and with decreasing unit cell volumes of the cubic perovskite-type structure, corresponding to higher chemical stabilities. The substitution of Ba for La, Ba for Sr, Co for Fe, and Fe for Mn lead to increase in unit cell volumes and decrease in absolute values of ΔH ⁰. The ΔH ⁰ values of the cobaltites/ferrites range from −33.5 kJ/mol for SrCo_0.8Fe_0.2O_3−x to −72.5 kJ/mol for La_0.2Sr_0.8Co_0.6Fe_0.4O_3−x, and of the manganates up to −132 kJ/mol for Ca_0.5Sr_0.5Mn_0.8Fe_0.2O_3−x .     

Solvothermal Synthesis, Crystal Structure, and Properties of the New Oxothiomolybdate Ni(dien)2[Mo2O2S6]

Summary.  The reaction of NiCl₂ · 6H₂O, Na₂MoO₄ ċ 2H₂O, and sulfur in a mixture of diethylenetriamine and 0.2 M ammonia solution (1:4) under solvothermal conditions leads to the formation of orange-red crystals of the oxothiomolybdate Ni(dien)₂[Mo₂O₂S₆] (dien = diethylenetriamine) in nearly 100% yield. The structure consists of [Ni(dien)₂]²⁺ cations and discrete dimeric [Mo₂O₂S₆]²⁻ anions. The compound crystallizes in the monoclinic space group P2₁/c (a = 8.726(2), b = 18.111(4), c = 14.419(3) ?, β = 101.686(3)°). Upon heating the compound decomposes in a single step starting at about 250°C. The final decomposition product was identified by X-ray powder diffractometry as MoS₂ and Ni₃S₂. Spectroscopic data as well as detailed synthetic procedures for Ni(dien)₂[Mo₂O₂S₆] are reported. Received November 6, 2000. Accepted November 17, 2000     

Oxygen ionic transport in Bi2O3-based oxides: II. The Bi2O3–ZrO2–Y2O3 and Bi2O3–Nb2O5–Ho2O3 solid solutions

Electrical conductivity, fluorite-type cubic unit cell volume and thermal expansion of the (Bi_{1− x} Nb _x )_{1− y} Ho _y O_1.5+δ (x=0.05 and 0.08; y=0.10−0.15) and (Bi_{1− x} Zr _x )_{1− y} Y _y O_1.5+δ (x=0.05 and 0.07; y=0.15) solid solutions have been found to decrease regularly with increasing dopant content. Annealing at temperatures below 900 K leads to a phase decomposition and to a sharp decrease in conductivity of the ceramics. Oxygen ion transference numbers have been determined by the e.m.f. method and by Faradaic efficiency measurement to exceed 0.9. A new technique of studying Faradaic efficiency has been proposed and verified using (Bi_0.95Zr_0.05)_0.85Y_0.15O_1.5+δ and Zr_0.90Y_0.10O_1.95 ceramic samples. Received: 31 October 1997 / Accepted: 18 December 1997     

Kinetics of the Formation of the Blue Complex CrO(O2)2 Formed by Dichromate and H2O2 in Acid Solutions. A Stopped-Flow Investigation Using Rapid-Scan UV-VIS Detection

Summary.  The kinetics of the CrO(O₂)₂ formation by H₂O₂ and Cr₂O₇ ²⁻ in aqueous acidic media was measured at 293 ± 2 K in a pH range between 2.5 and 3.3. Using the stopped-flow method with rapid scan UV-VIS detection, the rate law of the formation of CrO(O₂)₂ was determined. For the media HClO₄, HNO₃ and CH₃COOH, the reaction order in the Cr₂O₇ ²⁻ concentration was found to be 0.5. For [H₂O₂] as well as for [H⁺], the reaction was first order in all acids used. In HCl and H₂SO₄ media the reaction was first order in Cr₂O₇ ²⁻. At T = 293 ± 2 K the rate constant for the formation of Cr(O)(O₂)₂ was found to be (7.3 ± 1.9) · 10² M^−3/2 s⁻¹ in HClO₄. Corresponding author. E-mail: grampp@ptc.tu-graz.ac.at Received January 30, 2002; accepted (revised) June 5, 2002     

Cathodic performance of anatase (TiO2)-coated Li(Ni0.8Co0.2)O2

We report the use of Li(Ni_0.8Co_0.2)O₂ coated with different amounts of anatase (TiO₂) as a cathode material for lithium-ion cells. Electrochemical behavior is modified owing to coating and/or incorporation of titanium into the first few surface layers of Li(Ni_0.8Co_0.2)O₂. Compositions with molar concentrations of x=0.005 and 0.02 exhibit better capacity retention than the mother compound (40 cycles, 0.5 C rate, 2.75–4.30 V). Electronic Publication     

NiCr x Fe2-x O4 as cathode materials for electrochemical reduction of NO x

Solid solutions of spinel-type oxides with the composition NiCr _x Fe_2-x O₄ (x = 0.0, 0.5, 1.0, 1.5, 2.0) were prepared with the glycine–nitrate combustion synthesis. Four-point DC resistivity measurements show an increase in the conductivity as more Cr is introduced into the structure, whereas dilatometer measurements show that the linear thermal expansion decreases with increasing Cr content. The oxides were used as electrode materials in a pseudo-three-electrode setup in the temperature range of 300–600 °C. Cyclic voltammetry and electrochemical impedance spectroscopy were used to characterize the electrochemical behavior in 1% NO, 1% NO₂, and 10% O₂. NiCr₂O₄ shows high activity in NO and NO₂ relative to O₂ and can therefore be considered as a possible electrode material. Peaks were detected in the voltammograms recorded on NiCr₂O₄ in 1% NO. The origin of the peaks seems to be related to the oxidation of Cr or the formation of nitrogen-containing species formed on the surface of the electrode.     

Oxygen ionic transport in Bi2O3-based oxides: The solid solutions Bi2O3–Nb2O5

The minimum concentration of niobium to stabilize the fluorite-type f.c.c. phase in the Bi₂O₃–Nb₂O₅ oxide system at temperatures below 996 K was ascertained to be about 10 mol%. Thermal expansion, electrical conductivity and crystal lattice parameters of the Bi(Nb)O_1.5+δ solid solutions decrease with increasing niobium content. Thermal expansion coefficients were calculated from the dilatometric data to be (10.314.5)×10⁻⁶ K⁻¹ at temperatures in the range 300–700 K and (17.526.0)×10⁻⁶ K⁻¹ at 700–1100 K. The conductivity of the Bi_{1− x} Nb _x O_1.5+δ ceramics is predominantly ionic. The p-type electronic transference numbers of the Bi(Nb)O_1.5+δ solid solutions in air were determined to be less than 0.1. Annealing at temperatures below 900 K results in a sharp decrease in conductivity of the Bi_{1− x} Nb _x O_1.5+δ ceramics. Received: 18 August 1997 / Accepted: 20 October 1997     

Electrochemical study of spinel oxide systems with nominal compositions Ni1− x Cu x Co2O4 and NiCo2− y Cu y O4

Studies on the electrochemical behaviour of Ni_{1− x} Cu _x Co₂O₄ (x ≤ 0.75) and NiCo_{2− y} Cu _y O₄ (y ≤ 0.30) electrodes in 5 mol dm⁻³ KOH aqueous solutions are presented. The oxide layers have been prepared by thermal decomposition of aqueous nitrate solutions on nickel supports at 623 K. Powder samples were also prepared by thermal decomposition under the same conditions. The powder samples and the oxide layers were characterised by X-ray powder diffraction. The influence of the copper content on the voltammetric response of the electrodes and activity towards oxygen evolution reaction is analysed and correlated with the surface composition of the electrodes by means of X-ray photoelectron spectroscopy data. The analysis of the results reveals that the presence of Cu affects the electrode behaviour and its influence depends on which cation has been replaced. Received: 22 February 1999 / Accepted: 26 October 1999     

Thermal Conversion of Gels Prepared by the Complex Sol-Gel Process (CSGP) from Li+-Me2+-CH3COO−-Ascorbic Acid (ASC)-NH4 +-OH−-H2O Systems to LiMn2O4 and LiNi x Co1 − x O2

The spinel LiMn₂O₄ and layered oxides LiNi _x Co_{1 – x} O₂ (x = 1; 0.75; 0) have been prepared by Complex Sol-gel Process (CSGP). The appropriate sol compositions were obtained from acetate aqueous solution of metals containing ascorbic acid by alkalizing it with aqueous ammonia. Gels were produced from the systems by evaporation of water and other volatilies at elevated temperatures. A very intense foaming was observed during the heating at the temperatures higher than 140°C. To avoid foaming in the course of the final thermal treatment, a very long (lasting several days) soaking step was found necessary. However pretreated materials exhibit self-ignition at temperature range 320–500°C dependent on socking conditions. The dependence of self-ignition temperature on carbon content in bed as well as on specific surface has not been proved. Final thermal transformation of gel to solid was studied by TG, DTA, XRD, and IR methods. It was observed that final compounds are formed faster from precursors which did not contain Ni (e.g. LiMn₂O₄ and LiCoO₂), while Li carbonate is not formed in these systems. In contrast, in Li-Ni(Co)-O the formation of Li(or Ni)CO₃ was always proved. In addition, during the thermal treatment Ni species are partially reduced even to metallic phase. This effect evidently restrains the formation of pure layered oxides phase. Electrochemical properties of carbonate free compounds are definitely better than of those containing CO₃.     

Thermodynamic Stability of Transition‐Metal‐Substituted LiMn2−xMxO4 (M=Cr,Fe, Co,and Ni) Spinels

The formation enthalpies from binary oxides of LiMn₂O₄, LiMn_2?xCr_xO₄ (x=0.25, 0.5, 0.75 and 1), LiMn_2?xFe_xO₄ (x=0.25 and 0.5), LiMn_2?xCo_xO₄ (x=0.25, 0.5, and 0.75) and LiMn_1.75Ni_0.25O₄ at 25 °C were measured by high temperature oxide melt solution calorimetry and were found to be strongly exothermic. Increasing the Cr, Co, and Ni content leads to more thermodynamically stable spinels, but increasing the Fe content does not significantly affect the stability. The formation enthalpies from oxides of the fully substituted spinels, LiMnMO₄ (M=Cr, Fe and Co), become more exothermic (implying increasing stability) with decreasing ionic radius of the metal and lattice parameters of the spinel. The trend in enthalpy versus metal content is roughly linear, suggesting a close‐to‐zero heat of mixing in LiMn₂O₄—LiMnMO₄ solid solutions. These data confirm that transition‐metal doping is beneficial for stabilizing these potential cathode materials for lithium‐ion batteries.