共轭刚性苯并二噁唑类聚合物的合成及其光物理性能研究

设计并合成了一系列共轭高分子———聚亚苯基苯并二唑 (PBO) ,聚亚乙烯基苯并二唑 (PBOV)和聚亚丁二唑 (PBODV) ,并对它们进行了表征 .用紫外吸收光谱和荧光光谱对聚合物的溶液和薄膜进行了详细的研究 ,研究结果表明分子结构中双键的引入可以降低聚合物的光带能隙 ,λmax从PBO溶液的 4 2 8 5nm (Eg=2 76eV) ,到PBOV溶液的 4 80 5nm (Eg=2 4 6eV) ,再到PBODV溶液的 4 96 0nm (Eg=2 38eV) .共轭程度的增加使得聚合物溶液更容易发生集聚从而导致荧光自熄灭 .     

Synthesis and Characterization of Poly(p-phenylene benzobisoxazole)/Poly(pyridobisimidazole) Block Copolymers

Poly(p-phenylene benzobisoxazole)/poly(pyridobisimidazole) block copolymers (PBO-b-PIPD) were prepared by introducing poly(pyridobisimidazole) (PIPD) moieties into the main chains of poly(p-phenylene benzobisoxazole) (PBO) in order to enhance its photostability. PBO and copolymer fibers were directly prepared from the polymerization solutions by dry-jet wet-spinning. Chemical structures and molecular chains arrangement of the block copolymers were characterized by Fourier transform infrared (FTIR) spectroscopy, solid-state ¹³C-NMR and wide angle X-ray diffraction (WAXD). Thermal stability of the copolymers was investigated by thermogravimetric analysis (TGA) in nitrogen. Thin films of PBO and copolymers were cast from methanesulfonic acid (MSA) solutions. Both the films and fibers were exposed to UV light to determine their photostability. Changes in the chemical structures and surface morphologies of the films were characterized by FTIR spectra and scanning electronic microscopy (SEM), respectively. After UV light exposure, the retention of strength for copolymer fibers is improved compared to PBO fibers. The results revealed that copolymers suffered less photodegradation in comparison with homopolymer. The mechanism for the improved photostability of the copolymers was discussed.     

Hydrolytic stability of polybenzobisoxazole and polyterephthalamide body armor

Previous work conducted at the National Institute of Standards and Technology (NIST) to investigate the field failures of soft body armor containing the material poly(p -phenylene-2,6-benzobisoxazole), or PBO, revealed that this material was susceptible to hydrolysis, and a mechanism of this hydrolysis was proposed. In this work, viscometric estimations of the molar mass of environmentally conditioned PBO are used to support a previously proposed mechanism of PBO hydrolysis. Results with PBO were compared with poly(p-phenylene terephthalamide), or PPTA, which has been used in body armor applications for more than 30 years. Losses in tensile strength were found to correspond to a reduction in molar mass for PBO. This indicates that chain scission due to complete hydrolysis is occurring in this material. Similar trends were observed for PPTA, but the relationship between molar mass reduction and losses in tensile strength was not as evident for this material. Confocal microscopy, mechanical properties measurements, and molecular spectroscopy are used to further investigate the degradation of both PBO and PPTA.     

SYNTHESIS,CHARACTERIZATION AND QUENCHING BEHAVIOR OF A CATIONIC POLY(p-PHENYLENEVINYLENE) RELATED COPOLYMER

A cationic poly(p-phenylene vinylene) related copolymer without bulky phenylene substitutents attached to the conjugated backbone was prepared through Wittig reaction.The molecular structure and optical properties were highly investigated through ~1H-NMR,UV and PL spectroscopy.The quenching behavior was also investigated,and the results demonstrate that incomplete quenching exists,which is consistent with the cationic poly(p-phenylene vinylene) related copolymer containing bulky phenylene substitutents,p...     

Porosity development in chars from thermal degradation of poly(p-phenylene benzobisoxazole)

The main objective of this work was to investigate porosity development in carbonaceous materials formed by thermal degradation of the high thermal stability polymer, poly(p-phenylene benzobisoxazole) (PBO). Two varieties of PBO, as-spun (AS) and high-modulus (HM) were studied. Chars obtained at various polymer decomposition temperatures (selected on the basis of thermogravimetric and differential thermal analysis results) were characterized by elemental analysis, infrared spectroscopy, X-ray diffraction and CO₂ adsorption at 273 K. The obtained adsorbents essentially contained narrow micropores, and maximum pore development took place at ca. 1000 K, when the polymer was not yet completely decomposed. At higher temperatures, there is a certain pore widening along with a displacement towards smaller pore sizes, and the pore volume significantly decreases.     

纳米CdSe与聚4-乙烯基吡啶盐的复合与表征

用巯基乙酸作稳定剂在水相中合成了CdSe纳米颗粒. 聚4-乙烯基吡啶季铵盐(PVPNI)通过静电作用与CdSe纳米颗粒复合形成了纳米复合材料.该复合材料通过红外光谱数据（IR）、电感耦合等离子发射光谱（ICP-AES）、透射电镜（TEM）等方法进行了表征,并通过紫外可见吸收光谱(UV-Vis)和荧光光谱(PL)对其光学性质进行了研究.结果表明,复合材料的形成,改善了纳米CdSe的分散性,并提高了纳米CdSe的荧光强度.     

Temperature and humidity aging of poly(p-phenylene-2,6-benzobisoxazole) fibers: Chemical and physical characterization

In recent years, poly(p-phenylene-2,6-benzobisoxazole) (PBO) fibers have become prominent in high strength applications such as body armor, ropes and cables, and recreational equipment. The objectives of this study were to expose woven PBO body armor panels to elevated temperature and moisture, and to analyze the chemical, morphological and mechanical changes in PBO yarns extracted from the panels. A 30% decrease in yarn tensile strength, which was correlated to changes in the infrared peak absorbance of key functional groups in the PBO structure, was observed during the 26 week elevated temperature/elevated moisture aging period. Substantial changes in chemical structure were observed via infrared spectroscopy, as well as changes in polymer morphology using microscopy and neutron scattering. When the panels were removed to an ultra-dry environment for storage for 47 weeks, no further decreases in tensile strength degradation were observed. In a follow-on study, fibers were sealed in argon-filled glass tubes and exposed to elevated temperature; less than a 4% decrease in tensile strength was observed after 30 weeks, demonstrating that moisture is a key factor in the degradation of these fibers.     

Synthesis and characterization of new highly soluble and thermal-stable perylene-PPV copolymers containing triphenylamine moiety

Three new copolymers containing poly(p-phenylenevinylene) (PPV) and triphenylamine (TPA) moieties carrying N-(n-butyl)-N′-ethoxy-1,6,7,12-tetra-(4-tert-butylphenoxy)-3,4,9,10-perylenetetracarboxylic bisimide (PERY) pendant groups were successfully synthesized by Wittig condensation. The molar percentage of perylene pendants in copolymers was controlled by tuning the initial feed ratio of the perylene-bisaldehyde monomer. The structures and properties of three copolymers were characterized and evaluated by FT-IR, NMR, UV, FL, and photovoltaic analyses. The copolymers were highly soluble in conventional solvents such as toluene, CHCl₃, THF, DMF, etc., and they were thermally stable (?396 °C). Three copolymers have emission spectra with characteristic features of the perylene unit, however, and their luminescence are largely quenched with the increasing amount of PERY units in copolymers. The photophysical study in solution has shown that singlet-singlet energy transfers from PPV backbone to perylene in the copolymers. The photovoltaic devices ITO/PEDOT:PSS/copolymers/Ba/Al were fabricated, and the energy conversion efficiency of the device is only about 0.0005%, further indicating that an efficient energy transfer has taken place from PPV to perylene in the copolymers.     

IR laser-induced decomposition of poly(vinyl chloride-co-vinyl acetate): Control of products by irradiation conditions

IR laser-induced, ablative decomposition of poly(vinyl chloride-co-vinyl acetate) was examined under different irradiation conditions and its volatile and solid products were characterized by mass spectroscopy, infrared spectroscopy, Raman spectroscopy and UV spectroscopy and EDX-measurements. The laser decomposition of the copolymer, compared with that of poly(vinyl acetate) and poly(vinyl chloride), is revealed to be a more efficient process leading to solid films with the proportion of Cl- and CH₃C(O)O-groups controlled by irradiation conditions.     

Thermal properties of poly(butylene oxalate) copolymerized with azelaic acid

Poly(butylene oxalate) (PBO) and poly(butylene oxalate/butylene azelate) random copolymers (PBOBAz) of various compositions were synthesized in bulk and characterized in terms of chemical structure and thermal properties. The thermal behavior was examined by thermogravimetric analysis and differential scanning calorimetry. All copolymers were found to be partially crystalline and thermally stable up to about 290 °C. The main effect of copolymerization was a decrease in melting and glass transition temperatures with respect to PBO homopolymer. The pure crystalline phase characteristic of PBO was evidenced by means of X-ray measurements in all the copolymers under investigation. The fusion temperatures appeared to be well correlated to composition by Baur's equation.Amorphous samples were obtained after melt quenching and showed a monotonic decrease of glass transition temperatures as the content of the flexible butylene azelate units is increased. Fox equation described well the T_g-composition data. Lastly, the overall crystallization rate of PBO was found to decrease regularly with increasing butylene azelate unit content.     

SYNTHESIS AND PHOTOPHYSICAL PROPERTIES OF POLY(ARYL IMINO) CONTAINING ACRIDINE UNITS(PAIA)

1,4-Bis-(4-bromobenzoyl)benzene and proflavine,3,6-diaminoacridine free base were synthesized first.Using 1,4- bis-(4-bromobenzoyl)benzene and proflavine,3,6-diaminoacridine free base as the monomers,poly(aryl imino) containing acridine units(PAIA) was synthesized via palladium-catalyzed amination.The structure of PAIA was characterized by means of FTIR,~1H-NMR spectroscopy and elemental analysis,the results show an agreement with the proposed structure.The UV absorption and photoluminescence spectra wer...     

Study on interaction between Tb(III) and poly(N-isopropylacrylamide)

A new kind of the thermo-sensitive and fluorescent complex of poly(N-isopropylacrylamide) (PNIPAM) and Tb(III) was synthesized by free radical polymerization, in which PNIPAM was used as a polymer ligand. The complex was characterized by using X-ray photoelectron spectroscopy (XPS), ultraviolet-visual (UV), Fourier transform infrared (FT-IR) and fluorescence spectroscopy. The results from the experiments indicated that there is a strong interaction between PNIPAM and Tb(III), leading to a decrease in the electron density of nitrogen and oxygen atoms and an increase in the electron density of Tb(III) in the PNIPAM containing Tb(III) by contrast with PNIPAM and Tb(III), respectively, meanwhile, exhibiting that the Tb(III) is mainly bonded to oxygen atoms in the polymer chain of PNIPAM and formed the complex of PNIPAM-Tb(III). After forming the PNIPAM-Tb(III) complex, the emission fluorescence intensity of Tb(III) in the PNIPAM-Tb(III) complex is significantly enhanced because the effective intramolecular energy transfer from PNIPAM to Tb(III). Especially, the emission intensity of the fluorescence peak at 547 nm can be increased as high as 145 times comparing with that of the pure Tb(III). The intramolecular energy transfer efficiency for fluorescence peak at 547 nm can reach as high as 68%. The fluorescence intensity is related the weight ratio of Tb(III) and PNIPAM in the PNIPAM-Tb(III) complex. When the weight ratio is 1.4%, the maximum fluorescence enhancement can be obtained. Nevertheless, the lower critical solution temperature of PNIPAM containing a low content of Tb(III) has not obviously changed after the formation of the complex of PNIPAM-Tb(III) by the interaction between PNIPAM and Tb(III). This novel thermosensitive and fluorescence characterization of the PNIPAM-Tb(III) complex may be useful in the fluorescence systems and the biomedical field.     

PBO聚合物紫外吸收光谱中环境因素影响的理论研究

芳杂环液晶高分子聚对亚苯基苯并二噁唑（PBO, poly(p-phenylene-2,6- benzobisoxazole)）的共轭平面结构赋予其光电性能而备受关注.实验结果表明其光电性能受其所处环境状态影响. 通过量子化学计算研究发现,PBO无论固态还是溶液状态的最大紫外吸收均较其本征值有所红移.对PBO二聚体模型以及其在强质子酸中所具有的质子化形态模型的紫外吸收光谱计算模拟的结果表明,PBO聚集态时的分子间相互作用,以及溶液中质子化效应均导致红移.质子化模型所得紫外吸收光谱能很好地阐释溶液中具有精细结构实测的紫外吸收光谱.     

Photodegradation kinetics of poly(para-substituted styrene) in solution

The UV irradiation effects on stability of polystyrene, poly(4-methoxystyrene), poly(4-methylstyrene), poly(α-methylstyrene), poly(4-tert-butylstyrene), poly(4-chlorostyrene), and poly(4-bromostyrene) in dichloromethane, dichloromethane, tetrahydrofuran, and N,N-dimethylformamide solutions were studied in the presence of oxygen at different intervals of irradiation time. The photodegradation was studied at 293 K using fluorescence spectroscopy. Solutions of these polymers were accompanied by quenching of monomer and excimer emissions during the exposure of their solutions to UV light, and by a change in the structure of the fluorescence spectrum. Irradiation of poly(4-methylstyrene) and poly(α-methylstyrene) at excitation wavelength of 265 nm showed an increase of fluorescence intensity of a broad band, at longer wavelength without clear maxima. This may indicate that photodestruction of these polymers by irradiation with light of frequency absorbed by the polymer, may start from a random chain scission, with the possibility of formation of polyene and carbonyl compounds.     

Photochemical stability of poly(vinyl pyrrolidone) in the presence of collagen

The photochemical stability of poly(vinyl pyrrolidone) (PVP) in the presence of 1%, 3% and 5% of collagen has been studied by UV-vis spectroscopy, Fourier transform infrared spectroscopy (FTIR), thermogravimetry analysis (TG) and derivative thermogravimetry (DTG). Surface properties have been studied by contact angle measurements. PVP samples and samples containing 1%, 3% and 5% of collagen were irradiated with UV light of wavelength λ = 254 nm in air for up to 24 h. The amount of gel created during UV irradiation was estimated.PVP in the presence of 1%, 3% and 5% of collagen is less stable both thermally and photochemically. Collagen enhances photochemical processes leading to crosslinking of PVP. The contact angle measurements and values of surface free energy showed that the wettability of PVP films was changed by the addition of collagen and by UV irradiation. The increase of polarity of samples indicates an efficient photooxidation on the surface upon UV irradiation.     

Resonance raman spectra of poly‐(p‐phenylenebenzobisoxazole), poly‐(p‐phenylenebenzobisthiazole), and poly(pyridobisimidazole)

Resonance Raman spectra of poly(p‐phenylenebenzobisoxazole) (PBO), poly(p‐phenylenebenzobisthazole) (PBZT), and poly(pyridobisimidazole) (PIPD) were measured. In the case of PBO, no large dependence on wavelength of excited laser can be observed, whereas in the cases of PBZT and PIPD, the spectra depends on wavelength of excited laser. This difference may be attributed to the colors of the samples: PBO is gold, and PBZT and PIPD are metallic blue, which show the different conjugated states. The spectra of PBO are rather simpler than those of PBZT and PIPD. This is considered to be reflected by the fact that only a chain passes through the unit cell of PBO, while two chains pass through the unit cell of PBZT and PIPD. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 39: 1791–1793, 2001     

非共价键自组装制备聚对苯撑乙炔/聚丙烯酸水溶性荧光纳米粒子及其光物理行为研究

通过功能化聚对苯撑乙炔(含羟基与氨基)和聚丙烯酸之间的非共价键自组装制备了一系列含共轭聚合物的水溶性荧光纳米粒子, 并进行了相关结构和光学性质表征. 研究表明, 纳米粒子的大小和聚丙烯酸/聚对苯撑乙炔质量比直接相关. 光物理性质研究表明, 形成水溶性纳米粒子后, 疏水的聚苯撑乙炔链在纳米粒子中易于形成π-链间聚集, 其光物理性质与其在薄膜态时相似.     

ZnO-latex hybrids obtained by polymer-controlled crystallization: a spectroscopic investigation

Micro- and submicrosized ZnO-polymer hybrid materials were synthesized by precipitating zinc oxide from an aqueous medium in the presence of poly(styrene-acrylic acid) latex nanoparticles, prepared by miniemulsion polymerization. Up to 10 wt % of the latex becomes incorporated into the crystals. Although the long-range order of the inorganic material is essentially not altered by the polymer, studies by photoluminescence (PL) spectroscopy and electron paramagnetic resonance (EPR) show that the latex particles influence the optical and paramagnetic properties of the hybrids, which can be correlated with changes in the defect structure. Typical PL emission spectra showed a narrow UV peak and a defect-related broad band in the green-yellow spectral region. The former emission is attributed to exciton recombination, whereas the latter seems to be related with deep-level donors. Latex acts as a quencher of the visible emission, and compared to pure ZnO, ZnO-latex hybrids show a significantly lower PL intensity in the visible range. A noticeable dynamic behavior of the PL, clearly more remarkable in the presence of latex, was observed, and it is explained in terms of photodesorption of oxygen adsorbed at surface positions. EPR provided additional information about crystal defects and species with unpaired electrons. All EPR spectra showed a single signal at g approximately 1.96, whose intensity and temperature dependence did not correlate with those of the PL visible band. These findings indicate that the green-yellow emission and the EPR signal of our samples have a different physical origins.     

Photochemical stability of poly(vinyl alcohol) in the presence of collagen

The photochemical stability of poly(vinyl alcohol) (PVA) in the presence of 1%, 3% and 5% of collagen has been studied by Fourier Transform Infrared (FTIR) Spectroscopy, UV-vis spectroscopy, and Differential Scanning Calorimetry (DSC). PVA samples containing 1%, 3% and 5% of collagen were irradiated with UV light wavelength λ = 254 nm in air.The results have shown that PVA in the presence of 1%, 3% and 5% of collagen is less stable under UV radiation than pure PVA. A small amount of collagen in PVA enhances photooxidation in the PVA. The amount of crystallinity in PVA containing 1%, 3% and 5% of collagen decreases faster with UV irradiation time than that for pure PVA films.     

A New Poly(fluorene‐co‐carbazole) with a Large Substituent Group at the 9‐Position of the Carbazole Moiety: An Efficient Blue Emitter

Summary: A new poly(fluorene‐co‐carbazole) (PFC‐1) with a large substituent group (ADN, a naphthalene‐anthracene derivative moiety) at the 9‐position of carbazole was synthesized. Compared with poly(fluorene‐co‐carbazole)s that have an alkyl substituent group at the 9‐position of the carbazole, the UV‐vis absorption (or photoluminescent emission) peaks of PFC‐1 are in almost the same position both in solution and in the solid state, whereas films of the former give peaks at longer wavelengths than those in solution. The photoluminescent (PL) spectra of PFC‐1 indicate that the attachment of ADN to the poly(fluorene‐co‐carbazole)s gives rise to an efficient blue emission from non‐aggregated ADN. There is no difference evident between PFC‐1 and other reported poly(fluorene‐co‐carbazole)s in PL quantum yield, thermostability, and electrochemical behavior, which suggests that PFC‐1 is an efficient blue emitter.

UV‐Vis spectra of the poly(fluorene‐co‐carbazole) (PFC‐1), with a large substituent group (ADN, a naphthalene‐anthracene derivative moiety) at the 9‐position of carbazole, in toluene and in the film.