Soluble and thermally stable polyamides bearing 1,1′-thiobis(2-naphthoxy) groups

A new-type of sulfide containing diacid (1,1′-thiobis(2-naphthoxy acetic acid)) was synthesized from 2-naphthol in three steps. Reaction of 2-naphthol with sulfur dichloride afforded 1,1′-thiobis(2-naphthol) (TBN). 1,1′-Thiobis(2-naphthoxy acetic ester) (TBNAE) was successfully synthesized by refluxing the TBN with methylcholoroacetate in the presence of potassium carbonate. The related diacid was synthesized by basic solution reduction of TBNAE. The obtained diacid was fully characterized and used to prepare novel thermally stable poly(sulfide ether amide)s via polyphosphorylation reaction with different aromatic diamines. The properties of these new polyamides were investigated and compared with similar polyamides. These polyamides showed inherent viscosities in the range of 0.39-0.87 dL g⁻¹ in N,N-dimethylacetamide (DMAc) at 30 °C and at a concentration of 0.5 g dL⁻¹. All the polyamides were readily soluble in a variety of polar solvents such as DMAc and tetrahydrofuran (THF). These polyamides showed glass transition temperature (T_g) between 241-268 °C. Thermogravimetric analysis measurement revealed the decomposition temperature at 10% weight loss (T₁₀) ranging from 441- 479 °C in argon atmosphere.     

A novel class of organosoluble and light-colored fluorinated polyamides derived from 2,2-bis(4-amino-2-trifluoromethylphenoxy)biphenyl or 2,2-bis(4-amino-2-trifluoromethylphenoxy)-1,1-binaphthyl

Two series of novel fluorinated aromatic polyamides were prepared from 2,2^′-bis(4-amino-2-trifluoromethylphenoxy)biphenyl (2) and 2,2^′-bis(4-amino-2-trifluoromethylphenoxy)-1,1^′-binaphthyl (4) with various aromatic dicarboxylic acids using the phosphorylation polycondensation technique. The polyamides had inherent viscosities ranging from 0.43 to 0.62 dl/g and 0.36 to 0.74 dl/g, respectively. All the fluorinated polyamides were soluble in many polar organic solvents such as N,N-dimethylacetamide (DMAc), N-methyl-2-pyrrolidinone, and afforded transparent, light-colored, and flexible films upon casting from DMAc solvent. These polyamides showed glass-transition temperatures in the ranges of 190-240 °C (for the 6 series from diamine 2) and 247-255 °C (for the 7 series from diamine 4) by differential scanning calorimetry, softening temperatures in the ranges of 196-230 °C (6 series) and 241-291 °C (7 series) by thermomechanical analysis, and decomposition temperatures for 10% weight loss above 420 °C in both nitrogen and air atmospheres.     

Synthesis and properties of novel 5-(cyclohepta-2′,4′,6′-trienylidene)pyrimidine-2(1H),4(3H),6(5H)-triones: methodology for synthesizing cyclohepta[b]pyrimido[5,4-d]furan-8(7H),10(9H)-dionylium tetrafluoroborates

Novel condensation reaction of tropone with N-substituted and N,N′-disubstitued barbituric acids in Ac₂O afforded 5-(cyclohepta-2′,4′,6′-trienylidene)pyrimidine-2(1H),4(3H),6(5H)-trione derivatives (8a-f) in moderate to good yields. The ¹³C NMR spectral study of 8a-f revealed that the contribution of zwitterionic resonance structures is less important as compared with that of 8,8-dicyanoheptafulvene. The rotational barriers (ΔG^‡) around the exocyclic double bond of mono-substituted derivatives 8a-c were obtained to be 14.51-15.03 kcal mol⁻¹ by the variable temperature ¹H NMR measurements. The electrochemical properties of 8a-f were also studied by CV measurement. Upon treatment with DDQ, 8a-c underwent oxidative cyclization to give two products, 7 and 9-substituted cyclohepta[b]pyrimido[5,4-d]furan-8(7H),10(9H)-dionylium tetrafluoroborates (11a-c·BF₄⁻ and 12a-c·BF₄⁻) in various ratios, while that of disubstituted derivatives 8d-f afforded 7,9-disubstituted cyclohepta[b]pyrimido[5,4-d]furan-8(7H),10(9H)-dionylium tetrafluoroborate (11d-f·BF₄⁻) in good yields. Similarly, preparation of known 5-(1′-oxocycloheptatrien-2′-yl)-pyrimidine-2(1H),4(3H),6(5H)-trione derivatives (14a-d) and novel derivatives 14e,f was carried out. Treatment of 14a-c with aq. HBF₄/Ac₂O afforded two kinds of novel products 11a-c·BF₄⁻ and 12a,c·BF₄⁻ in various ratios, respectively, while that of 14d-f afforded 11d-f. The product ratios of 11a-c·BF₄⁻ and 12a-c·BF₄⁻ observed in two kinds of cyclization reactions were rationalized on the basis of MO calculations of model compounds 20a and 21a. The spectroscopic and electrochemical properties of 11a-f·BF₄⁻ and 12a-c·BF₄⁻ were studied, and structural characterization of 11c·BF₄⁻ based on the X-ray crystal analysis and MO calculation was also performed.     

Application and details of photoinduced oxidative cyclization of 5-(4′,9′-methanocycloundeca-2′,4′,6′,8′,10′-pentaenylidene)pyrimidine-2,4,6(1,3,5H)-triones and related compounds

As novel methodology for synthesizing the furan ring, a photoinduced oxidative cyclization of 5-(4′,9′-methanocycloundeca-2′,4′,6′,8′,10′-pentaenylidene)pyrimidine-2,4,6(1,3,5H)-triones (7a-c) and related compounds 9a-c was accomplished to give 5,10-methanocycloundeca[4,5]furo[2,3-d]pyrimidine-2,4(1,3H)-dionylium tetrafluoroborates (8a-c⁺·BF₄⁻) and related compounds 2a-c⁺·BF₄⁻, respectively. In the photoinduced oxidative cyclization, the molecular oxygen in air is used as oxidant and the reaction proceeds under mild conditions to give desired products without byproducts, and thus, it is interesting from the viewpoint of the green chemistry. On the reactions of the mono-substituted derivatives 7d,e and 9e,f, the selectivity of the photoinduced cyclizations were reversed as compared with those of the DDQ-promoted oxidative cyclizations. By the NMR monitoring of the reactions of 7a and deuterated compound 7a-D₂ under degassed conditions, the details of the reaction pathway were clarified and rationalized on the basis of the MO calculation by the 6-31G^∗ basis set of the MP2 levels as well.     

A “sodium trap” based on benzo-15-crown-5 with an exocyclic N-(thiophosphoryl)thiourea moiety

For N-(thio)phosphorylthioureas of the common formula RC(S)NHP(X)(OiPr)₂HL^I (R = N-(4′-aminobenzo-15-crown-5), X = S), HL^II (R = N-(4′-aminobenzo-15-crown-5), X = O), HL^III (R = PhNH, X = S), HL^IV (R = PhNH, X = O), and (N,N′-bis-[C(S)NHP(S)(OiPr)₂]₂-1,10-diaza-18-crown-6) H₂L^V, salts LiL^I,III,IV, NaL^I–IV, KL^I–IVM₂L^V (M = Li⁺, Na⁺, K⁺), Ba(L^I,III,IV)₂, and BaL^V have been synthesized and investigated. Compounds NaL^I,II quantitatively drop out as a deposit in ethanol medium, allowing the separation of Na⁺ and K⁺ cations. This effect is not displayed for the other compounds. The crystal structures of HL^III and the solvate of the composition [K(Me₂CO)L^III] have been investigated by X-ray crystallography.     

Further studies of tetrakis(N,N′-dialkylbenzamidinato)diruthenium(III) chloro and alkynyl compounds: molecular engineering of metallayne monomers

Three diruthenium(III) compounds Ru₂(L)₄Cl₂, where L is mMeODMBA (N,N′-dimethyl-3-methoxybenzamidinate, 1a), DiMeODMBA (N,N′-dimethyl-3,5-dimethoxy benzamidinate, 1b), or DEBA (N,N′-diethylbenzamidinate, 1c), were prepared from the reactions between Ru₂(OAc)₄Cl and respective HL under reflux conditions. Metathesis reactions between 1 and LiC₂Y resulted in bis-alkynyl derivatives Ru₂(L)₄(C₂Y)₂ [Y=Ph (2), SiMe₃ (3), SiⁱPr₃ (4) and C₂SiMe₃ (5)]. The parent compounds 1 are paramagnetic (S=1), while bis-alkynyl derivatives 2-5 are diamagnetic and display well-solved ¹H- and ¹³C-NMR spectra. Molecular structures of compounds 1b, 1c, 2c, 3c and 4b were established through single crystal X-ray diffraction studies, which revealed RuRu bond lengths of ca. 2.32 Å for parent compounds 1 and 2.45 Å for bis-alkynyl derivatives. Cyclic voltammograms of all compounds feature three one-electron couples: an oxidation and two reductions, while the reversibility of observed couples depends on the nature of axial ligands.     

Acyclic tertiary diamines and 1,4,7,10-tetraazacyclododecane with fluorine-containing β-diketones: Leading to low melting ionic adducts

N,N,N′,N′-Tetramethylmethanediamine (1a), N,N,N′,N′-tetramethylethanediamine (1b), N,N,N′,N′-tetramethyl-1,3-propanediamine (1c), and N,N,N′,N′-tetramethyl-1,6-hexanediamine (1d) were reacted at 25 °C with 1,1,1,5,5,5-hexafluoro-2,4-pentanedione (2a), 2,2-dimethyl-6,6,7,7,8,8,8-heptafluoro-3,5-octanedione (2b), 2-thenoyltrifluoroacetone (2c), and 4,4,4-trifluoro-1-(2-furyl)-1,3-butanedione (2d) to form the ionic adducts 3-18. 1,4,7,10-Tetraazacyclododecane (1e) reacted at 25 °C with β-diketones (2a-d) and 1,1,1-trifluoro-2,4-pentanedione (2e) to give ionic solids 19-23 in good yields. Some of the products are liquid at 25 °C and are thermally stable over long liquid ranges as determined by thermal gravimetric analyses. Single-crystal X-ray structure determinations show that compounds 9 and 21 crystallize in the monoclinic space groups P2(1)/c and P2(1)/n, respectively. All the new compounds were characterized by ¹H, ¹⁹F and ¹³C NMR, electrospray MS and/or elemental analyses.     

trans-Spanning ferrocene amidodiphosphine ligand: Synthesis, palladium complexes and catalytic use in Suzuki-Miyaura cross-coupling

Amide coupling between [2-(diphenylphosphino)phenyl]methylamine and 1′-(diphenylphosphino)ferrocene-1-carboxylic acid (Hdpf) afforded a novel diphosphine-amide, 1-{N-[(2-(diphenylphosphino)phenyl)methyl]carbamoyl}-1′-(diphenylphosphino)ferrocene (1), which was subsequently studied as a ligand for palladium(II) complexes. Depending on the metal precursor, the following complexes were isolated: [PdCl₂(1-κ²P,P′)] (2), [PdCl(Me)(1-κ²P,P′)] (3), [(μ-1){PdCl₂(PBu₃)}₂] (4) and [(μ-1){PdCl(L^NC)}₂] (L^NC = 2-[(dimethylamino-κN)methyl]phenyl-κC¹), featuring this ligand either as a trans-chelating or as a P,P′-bridging donor. The crystal structure of 2·1.25CH₂Cl₂ was established by X-ray crystallography, corroborating that 1 coordinates as a trans-spanning diphosphine without any significant distortion to the coordination sphere. Complex 2 together with a catalyst prepared in situ from 1 and palladium(II) acetate were tested in Suzuki-Miyaura reaction of aryl bromides with phenylboronic acid in dioxane.     

Complexes derived from the copper(II)/succinamic acid/N,N′,N″-chelate tertiary reaction systems: Synthesis,structural and spectroscopic studies

The use of succinamic acid (H₂sucm) in Cu^II/N,N′,N″-donor [2,2′:6′,2″-terpyridine (terpy), 2,6-bis(3,5-dimethylpyrazol-1-yl)pyridine (dmbppy)] reaction mixtures yielded compounds [Cu(Hsucm)(terpy)]_n(ClO₄)_n (1), [Cu(Hsucm)(terpy)(MeOH)](ClO₄) (2), [Cu₂(Hsucm)₂(terpy)₂](ClO₄)₂ (3), [Cu(ClO₄)₂(terpy)(MeOH)] (4), [Cu(Hsucm)(dmbppy)]_n(NO₃)_n·3nH₂O (5^.3nH₂O), and [CuCl₂(dmbppy)]·H₂O (6·H₂O). The succinamate(−1) ligand exists in four different coordination modes in the structures of 1–3 and 5, i.e., the μ₂-κO:κO′:κO″ in 1 and 5 which involves asymmetric chelating coordination of the carboxylato group and ligation of the amide O-atom leading to 1D coordination polymers, the μ₂-κ²O:κO′ in 3 which involves asymmetric chelating and bridging coordination of the carboxylato group, and the asymmetric chelating mode in 2. The primary amide group, either coordinated in 1 and 5, or uncoordinated in 2 and 3, participate in hydrogen bonding interactions, leading to interesting crystal structures. Characteristic IR bands of the complexes are discussed in terms of the known structures and the coordination modes of the Hsucm⁻ ligands. The thermal decomposition of complex 5·3nH₂O was monitored by TG/DTG and DTA measurements.     

Synthesis and properties of 4,9-methanoundecafulvenes and their transformation to 3-substituted 7,12-methanocycloundeca[4,5]furo[2,3-d]pyrimidine-2,4(1H,3H)-diones: photo-induced autorecycling oxidizing reaction toward amines

The synthesis and properties of 4,9-methanoundecafulvene [5-(4,9-methanocycloundeca-2′,4′,6′,8′,10′-pentaenylidene)pyrimidine-2,4,6(1,3,5H)-trione] derivatives 8a,b were studied. Their structural characteristics were investigated on the basis of the ¹H and ¹³C NMR and UV-vis spectra. The rotational barrier (ΔG^‡) around the exocyclic double bond of 8a was found to be 12.55 kcal mol⁻¹ by the variable temperature ¹H NMR measurement. The electrochemical properties of 8a,b were also studied by CV measurement. Furthermore, the transformation of 8a,b to 3-substituted 7,12-methanocycloundeca[4,5]furo[2,3-d]pyrimidine-2,4(1H,3H)-diones 16a,b was accomplished by oxidative cyclization using DDQ and subsequent ring-opening and ring-closure. The structural details and chemical properties of 16a,b were clarified. Reaction of 16a with deuteride afforded C13-adduct 19 as the single product, and thus, the methano-bridge controls the nucleophilic attack to prefer endo-selectivity. The photo-induced oxidation reaction of 16a and a vinylogous compound, 3-methylcyclohepta[4,5]furo[2,3-d]pyrimidine-2,4(3H)-dione 2a, toward some amines under aerobic conditions were carried out to give the corresponding imines (isolated by converting to the corresponding 2,4-dinitrophenylhydrazones) with the recycling number of 6.1-64.0 (for 16a) and 2.7-17.2 (for 2a), respectively.     

Oligothiophene-2-yl-vinyl bridged mono- and binuclear ruthenium(II) tris-bipyridine complexes: Synthesis, photophysics, electrochemistry and electrogenerated chemiluminescence

A series of mono- and binuclear ruthenium(II) tris-bipyridine complexes tethered to oligothienylenevinylenes have been synthesized and characterized by ¹H NMR, ¹³C NMR and TOF-MS spectrometry. Photophysics, electrochemistry and electrogenerated chemiluminescence (ECL) properties of these complexes are investigated. The electronic absorption spectra of the mononuclear ruthenium complexes show a significant red shift both at MLCT (metal-to-ligand charge transfer) and π-π^∗ transitions of oligothienylenevinylenes with increase in the number of thiophenyl-2-yl-vinyl unit. For the binuclear complexes these two absorption bands are overlapped. All the metal complexes have very weak emission compared to that of the reference complex Ru(bpy)²⁺₃. The first reduction potentials of all mononuclear ruthenium complexes are less negative than that of Ru(bpy)²⁺₃, due to the moderate electron-withdrawing effect of oligothienylenevinylenes. For binuclear ruthenium complexes, only one Ru(II/III) oxidation peak (E_1/2 = 0.96 V vs. Ag/Ag⁺) was observed, suggesting a weak interaction between two metal centers. Three successive reduction processes of bipyridine ligands are similar among all ruthenium complexes except for RuTRu, which has a very sharp peak owing to the accumulation of neutral product on the electrode surface. All these ruthenium complexes exhibited different ECL property in CH₃CN solution without any additional reductant or oxidant. For three mononuclear ruthenium complexes, the ECL intensity strengthens with increase in the number of thiophene-2-yl-vinyl unit. However, the ECL efficiency dramatically decreased in the binuclear ruthenium complexes. The ECL efficiencies of all the reported complexes do not exceed that of Ru(bpy)²⁺₃, where the ECL efficiency decreases in the order of RuTRu > Ru3T > Ru2T > RuT > Ru2TRu (RuT,bis-2,2′-bipyridyl-(4-methyl-4′-(2-thienylethenyl)-2,2′-bipyridine) ruthenium dihexafluorophosphate; Ru2T, bis-2,2′-bipyridyl-(4-methyl-4′-{(E)-2-[5-((E)-2-thienylethenyl)-thienylethenyl]}-2,2′-bipyridine) ruthenium dihexafluorophosphate; Ru3T, bis-2,2′-bipyridyl-(4-methyl-4′-{(E)-2-{(E)-2-[5-((E)-2-thienylethenyl)-thienylethenyl]}}-2,2′-bipyridine) ruthenium dihexafluorophosphate; RuTRu, bis-2,2′-bipyridyl-ruthenium-bis-[2-((E)-4′-methyl-2, 2′-bipyridinyl-4)-ethenyl]-thienyl-bis-2,2′-bipyridyl-ruthenium tetrahexafluorophosphate; Ru2TRu, bis-2,2′-bipyridyl-ruthenium-(E)-1,2-bis-{2-[2-((E)-4′-methyl-2,2′-bipyridinyl-4)-ethenyl]-thienyl}-ethenyl-bis-2,2′-bipyridyl-ruthenium tetrahexafluorophosphate).     

Total synthesis of apigenin 7,4′-di-O-β-glucopyranoside, a component of blue flower pigment of Salvia patens, and seven chiral analogues

We have succeeded in the first total synthesis of apigenin 7,4′-di-O-β-d-glucopyranoside (1a), a component of blue pigment, protodelphin, from naringenin (2). Glycosylation of 2 according to Koenigs-Knorr reaction provided a monoglucoside 4a in 80% yield, and this was followed by DDQ oxidation to give apigenin 7-O-glucoside (12a). Further glycosylation of 4′-OH of 12a with 2,3,4,6-tetra-O-acetyl-α-d-glucopyranosyl fluoride (5a) was achieved using a Lewis acid-and-base promotion system (BF₃·Et₂O, 2,6-di-tert-butyl-4-methylpyridine, and 1,1,3,3-tetramethylguanidine) in 70% yield, and subsequent deprotection produced 1a. Synthesis of three other chiral isomers of 1a, with replacement of d-glucose at 7 and/or 4′-OH by l-glucose (1b-d), and four chiral isomers of apigenin 7-O-β-glucosides (6a,b) and 4′-O-β-glucosides (7a,b) also proved possible.     

ipso-and para-Functionalization of meta-terphenyl ligands with substituted methyl groups: Unusual head-to-tail coupling of terphenyl moieties

The synthesis and characterization of several ipso-functionalized derivatives of the bulky terphenyl group are described. These include the primary alcohol Ar′CH₂OH (1), the bromo derivative Ar′CH₂Br (2), and the terphenyl formate Ar′CH₂OC(O)H (3). The alcohol 1 was obtained by treatment of LiAr′ with formaldehyde, and 1 was readily converted to the bromo derivative 2 using HBr. The reaction of 1 with formic acid afforded 3 in good yield. Attempts to form the Grignard derivative of 1, i.e., Ar′CH₂MgBr, resulted in a head-to-tail reaction of the terphenyl benzyl units to yield an unusual coupled product 4. An approach to the avoidance of this coupling involved the synthesis of the terphenyl derivatives and , bearing methyl groups in the para positions of the central aryl ring, which could be prepared in good yield, and converted to their respective lithium salts 7 and 8 without complication . The compounds were characterized by ¹H and ¹³C NMR spectroscopy, IR spectroscopy (1) and X-ray crystallography (2, 4, 5 and 6).     

Synthesis and structural characterization of 1′-(diphenylphosphino)ferrocene-1-carboxamide, its corresponding hydrazide, some heterocycles derived from the hydrazide and palladium(II) complexes with these functional phosphinoferrocene ligands

Two polar phosphinoferrocene ligands, 1′-(diphenylphosphino)ferrocene-1-carboxamide (1) and 1′-(diphenylphosphino)ferrocene-1-carbohydrazide (2), were synthesized in good yields from 1′-(diphenylphosphino)ferrocene-1-carboxylic acid (Hdpf) via the reactive benzotriazole derivative, 1-[1′-(diphenylphosphino)ferrocene-1-carbonyl]-1H-1,2,3-benzotriazole (3). Alternatively, the hydrazide was prepared by the conventional reaction of methyl 1′-(diphenylphosphino)ferrocene-1-carboxylate with hydrazine hydrate, and was further converted via standard condensation reactions to three phosphinoferrocene heterocycles, viz 2-[1′-(diphenylphosphino)ferrocen-1-yl]-1,3,4-oxadiazole (4), 1-[1′-(diphenylphosphino)ferrocen-1-carbonyl]-3,5-dimethyl-1,2-pyrazole (5), and 1-[1′-(diphenylphosphino)ferrocene-1-carboxamido]-3,5-dimethylpyrrole (6). Compounds 1 and 2 react with [PdCl₂(cod)] (cod = η²:η²-cycloocta-1,5-diene) to afford the respective bis-phosphine complexes trans-[PdCl₂(L-κP)₂] (7, L = 1; 8, L = 2). The dimeric precursor [(L^NC)PdCl]₂ (L^NC = 2-[(dimethylamino-κN)methyl]phenyl-κC¹) is cleaved with 1 to give the neutral phosphine complex [(L^NC)PdCl(1-κP)] (9), which is readily transformed into a ionic bis-chelate complex [(L^NC)PdCl(1-κ²O,P)][SbF₆] (10) upon removal of the chloride ligand with Ag[SbF₆]. Pyrazole 5 behaves similarly affording the related complexes [(L^NC)PdCl(5-κP)] (12) and [(L^NC)PdCl(5-κ²O,P)][SbF₆] (13), in which the ferrocene ligand coordinates as a simple phosphine and an O,P-chelate respectively, while oxadiazole 4 affords the phosphine complex [(L^NC)PdCl(4-κP)] (11) and a P,N-chelate [(L^NC)PdCl(4-κ²N³,P)][SbF₆] (14) under similar conditions. All compounds were characterized by elemental analysis and spectroscopic methods (multinuclear NMR, IR and MS). The solid-state structures of 1⋅½AcOEt, 2, 7⋅3CH₃CN, 8⋅2CHCl₃, 9⋅½CH₂Cl₂⋅0.375C₆H₁₄, 10, and 14 were determined by single-crystal X-ray crystallography.     

Reactivity of M(en)Cl2 (M = Pd/Pt,en = 1,2-diaminoethane) with N,N′-bis(salicylidene)-p-phenylenediamine: Binding with hexafluorobenzene

Schiff base N,N′-bis(salicylidene)-p-phenylenediamine (LH₂) complexed with Pt(en)Cl₂ and Pd(en)Cl₂ provided [Pt(en)L]₂ · 4PF₆ (1) and Pd(Salen) (2) (Salen = N,N′-bis(salicylidene)-ethylenediamine), respectively, which were characterized by their elemental analysis, spectroscopic data and X-ray data. A solid complex obtained by the reaction of hexafluorobenzene (hfb) with the representative complex 1 has been isolated and characterized as 3 (1 · hfb) using UV–Vis, NMR (¹H, ¹³C and ¹⁹F) data. A solid complex of hfb with a reported Zn-cyclophane 4 has also been prepared and characterized 5 (4 · hfb) for comparison with complex 3. The association of hfb with 1 and 4 has also been monitored using UV–Vis and luminescence data.     

Emission of 2-phenylethanol from its β-d-glucopyranoside and the biogenesis of these compounds from [H8] l-phenylalanine in rose flowers

The hydrolysis of 2-phenylethyl β-d-glucopyranoside (3) was found to be partially inhibited by feeding with 2-phenyl-N-glucosyl-acetamidiumbromide (8), a β-glucosidase inhibitor, resulting in a decrease in the diurnal emission of 2-phenylethanol (2) from Rosa damascena Mill. flowers. Detection of [1,1,2,2′,3′,4′,5′,6′-²H₈]-2 and [1,2,2′,3′,4′,5′,6′-²H₇]-2 from R. ‘Hoh-Jun’ flowers fed with [1,1,2,2′,3′,4′,5′,6′-²H₈]-3 suggested that β-glucosidase, alcohol dehydrogenase, and reductase might be involved in scent emission. Comprehensive GC-SIM analyses revealed that [1,2,2,2′,3′,4′,5′,6′-²H₈]-2 and [1,2,2,2′,3′,4′,5′,6′-²H₈]-3 must be biosynthesized from [1,2,2,2′,3′,4′,5′6′-²H₈] l-phenylalanine ([²H₈]-1) with a retention of the deuterium atom at α-position of [²H₈]-1.     

Synthesis and structural characterization of η-allyl(α-diimine)nickel(II) complexes bearing trimethylsilyl groups

A set of isomeric para- and meta-trimethylsilylphenyl ortho-substituted N,N-phenyl α-diimine ligands [(Ar-NC(Me)-(Me)CN-Ar) Ar=2,6-di(4-trimethylsilylphenyl)phenyl (16); Ar=2,6-di(3-trimethylsilylphenyl)phenyl (17)] have been synthesized through a two-step procedure. The palladium-catalysed cross-coupling reaction between 2,6-dibromophenylamine (7) and 4-trimethylsilylphenylboronic acid (8), 3-trimethylsilylphenylboronic acid (9) was used to prepare 4,4^′-bis(trimethylsilyl)-[1,1^′;3^′,1″]terphenyl-2^′-ylamine (10) and 3,3^′-bis(trimethylsilyl)-[1,1^′;3^′,1″]terphenyl-2^′-ylamine (11). The di-1-adamantylphosphine oxide Ad₂P(O)H (13) and di-tert-butyl-trimethylsilylanylmethylphosphine tert-Bu₂P-CH₂-SiMe₃ (14) were used for the first time as ligands for the Suzuki coupling. The condensation of 2,2,3,3-tetramethoxybutane (15) with anilines 10 and 11 afforded α-diimines 16 and 17. The reaction of π-allylnickel chloride dimer (18), α-diimines (16), (17) and sodium tetrakis[3,5-bis(trifluoromethyl)phenyl]borate (BAF) (19) or silver hexafluoroantimonate (20) led to two sets of isomeric complexes [η³-allyl(Ar-NC(Me)-(Me)CN-Ar)Ni]⁺ X⁻, [Ar=2,6-di(4-trimethylsilylphenyl)phenyl, X=BAF (3), X=SbF₆ (4); Ar=2,6-di(3-trimethylsilylphenyl)phenyl, X=BAF (5), X=SbF₆ (6)]. The steric repulsion of closely positioned trimethylsilyl groups in 4 caused the distortion of the nickel square planar coordination by 17.6° according to X-ray analysis.     

Controlled vinyl-addition-type polymerization of norbornene initiated by several cobalt complexes having substituted terpyridine ligands

A series of cobalt(II) complexes having terpyridine derivatives such as 2,2^′:6^′,2″-terpyridine (1), 4,4^′,4″-^tBu₃-2,2^′:6^′,2″-terpyridine (2), 5,5″-Me₂-2,2^′:6^′,2″-terpyridine (3), 6,6″-Me₂-2,2^′:6^′,2″-terpyridine (4) and 6,6″-(3,5-Me₂C₆H₃)₂-2,2^′:6^′,2″-terpyridine (5) was synthesized. The structures of 1, 3, and 4 were confirmed by X-ray crystallography. The coordination sphere around the cobalt center in 1 can be described as pseudo square pyramidal. On the other hand, complex 4 has pseudo trigonal bipyramidal structure. Upon activation with d-MAO (dried-methylaluminoxane), these complexes showed high activities for the polymerization of norbornene (NBE). In particular, polymerization of NBE with 4/d-MAO system at room temperature resulted in quantitative yield within several hours to give the polymers with relatively narrow molecular weight distributions and controlled molecular weight. The polymerizations of NBE with these cobalt catalyst systems proceeded in vinyl addition polymerization, which was confirmed by ¹H NMR spectra of the resulting polymers.     

Endo and exo cyclometallated iron carbonyl complexes derived from N-(N′-methyl-2-pyrrolylmethylidene)-2-thienylmethylamine

The reaction of N-(N′-methyl-2-pyrrolylmethylidene)-2-thienylmethylamine (1) with Fe₂(CO)₉ in refluxing toluene gives endo cyclometallated iron carbonyl complexes 2 and 5, exo cyclometallated iron carbonyl complex 3, and unexpected iron carbonyl complex 4. Complexes 2, 3, and 5 are geometric isomers. Complex 5 differs from complex 2 in the switch of the original substituent from α to β position of the pyrrolyl ring, and the pyrrolyl ring bridges to the diiron centers in μ-(3,2-η¹:η²) coordination mode in stead of μ-(2,3-η¹:η²). In complex 4, the pyrrolyl moiety of the original ligand 1 has been displaced by a thienyl group, which comes from the same ligand. Single crystals of 2, 3, and 5 were subjected to the X-ray diffraction analysis. The major product 2 undergoes: (i) thermolysis to recover the original ligand 1; (ii) reduction to form a hydrogenation product, 6, of the original ligand; (iii) substitution to form a monophosphine-substituted complex 7; (iv) chemical as well as electrochemical oxidation to produce a carbonylation product, γ-butyrolactam 8.     

Ring transformation of cyclohepta[b]pyrimido[5,4-d]furan-8(7H),10(9H)-dionylium ion to the corresponding pyrrole derivatives via troponeimine intermediates: photo-induced autorecycling oxidizing reactions of some amines

Ring transformation of 7,9-dimethylcyclohepta[b]pyrimido[5,4-d]furan- 8(7H),10(9H)-dionylium tetrafluoroborate 4⁺·BF₄⁻ to 7,9-dimethylcyclohepta[b]pyrimido[5,4-d]pyrrrole-8(7H),10(9H)-dionylium tetrafluoroborate 6a-d⁺·BF₄⁻ consists of the reaction of 4⁺·BF₄⁻ with amines and subsequent exchange of the counter-ion using aq. HBF₄. Reactions of 4⁺·BF₄⁻ with aniline and 4-substituted anilines afforded the corresponding pyrrole derivatives 6a-c⁺·BF₄⁻ directly in good yields. On the other hand, reaction of 4⁺·BF₄⁻ with benzylamine gave the troponeimine intermediate 9, which was not converted to 6d⁺·BF₄⁻ and reverted to 4⁺·BF₄⁻ by adding HBF₄; however, it was converted to 6d⁺·BF₄⁻ upon treatment with (COCl)₂ or SOCl₂, followed by exchange of the counter-ion. In a search for the characteristics of 9, inspection and comparison of the X-ray crystal analyses, NMR and UV-vis spectra, and CV measurement of 9 and N,N-disubstituted troponeimine derivatives 12 were carried out to suggest the remarkable structure of 12 having ionic C-O bonding between the imine-carbon atom and the oxygen atom of the barbituric acid moiety in the solid state. Thus, characteristics of 9 were ascribed to the sterically hindered and favorable conformation of N-protonated troponeimine intermediates. Furthermore, novel photo-induced oxidation reactions of a series of 4⁺·BF₄⁻, 5⁺·BF₄⁻, and 6a,e⁺·BF₄⁻ towards some amines under aerobic conditions were carried out to give the corresponding imines in 455-8362% yields [based on compounds 4⁺, 5⁺, and 6a,e⁺], suggesting the oxidation reaction occurs in an autorecycling process. Mechanistic aspects of the amine-oxidation reaction are also postulated.