Polystyrene copolymer supported by substituted (1R,2R)-1,2-diphenylethane-1,2-diamine-copper(II) complexes: a recyclable catalyst for asymmetric Henry reactions

Herein described the preparation of swelling pearl-like copolymer styrene—4-vinylbenzyl chloride cross-linked by means of tetra(ethylene glycol)-bis(4-vinylbenzyl)ether (200–800 μm). The pearl-like polymer was used to anchor (1R,2R)-1-amino-2-(2,3-dihydro-1H-isoindole-2-yl)-1,2-diphenylethane by a covalent bond; the product was subsequently transformed into the corresponding complex with Cu(II) acetate. The synthesized catalyst was used for the catalysis of the Henry reaction of functionalized aldehydes with nitromethane in ethanol. The reactions proceeded in a polymeric matrix of the swelling catalyst at a rate comparable with the rates of reactions in a homogeneous medium. The corresponding functionalized 2-nitroethanols were formed in quantitative yields (20 °C, 24 h) with enantiomeric excess values of up to 96%. The catalyst was recycled five times without losing its effectiveness with regard to the yield and enantioselectivity; only a partial mechanical degradation of the polymeric matrix occurred due to stirring.     

Preparation of macroporous functionalized polymer beads by a multistep polymerization and their application in zirconocene catalysts for ethylene polymerization

Macroporous functionalized polymer beads of poly(4‐vinylpyridine‐co‐1,4‐divinylbenzene) [P(VPy‐co‐DVB)] were prepared by a multistep polymerization, including a polystyrene (PS) shape template by emulsifier‐free emulsion polymerization, linear PS seeds by staged template suspension polymerization, and macroporous functionalized polymer beads of P(VPy‐co‐DVB) by multistep seeded polymerization. The polymer beads, having a cellular texture, were made of many small, spherical particles. The bead size was 10–50 μm, and the pore size was 0.1–1.5 μm. The polymer beads were used as supports for zirconocene catalysts in ethylene polymerization. They were very different from traditional polymer supports. The polymer beads could be exfoliated to yield many spherical particles dispersed in the resulting polyethylene particles during ethylene polymerization. The influence of the polymer beads on the catalytic behavior of the supported catalyst and morphology of the resulting polyethylene was investigated. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 873–880, 2003     

Development of a heterogeneous chemiluminescent flow immunoassay for DDT and related compounds

A heterogeneous chemiluminescent (CL) flow immunoassay for DDT was optimized comparing different types of immunoaffinity supports: beads, nylon coils and membranes (membranes HyBondN+). In order to characterize solid immunoaffinity supports two basic immunoassay formats were performed, using (1) enzyme-labeled secondary and (2) enzyme-labeled specific monoclonal antibodies (MAbs). In both formats, hapten DDT5 conjugated to ovalbumin immobilized on solid supports according to the appropriate immobilization procedure, enzyme label (horseradish peroxidase, HRP) and luminescent detection (luminol/H₂O₂/p-iodophenol) were used. The lowest limit of detection (LOD), 1 nM p,p-DDT, was obtained with a membrane-based flow immunoassay with HRP-labeled specific antibody. Beads and packed tubing were discarded as appropriate supports because of the difficulties encountered for reproducible packing and the occurrence of light scatterring (beads), which seriously compromised the performance and reproducibility of the flow immunoassay.     

Photochromic copolymers containing 3-indolylfulgides/indolylfulgimides: Synthesis and photochemical properties in toluene and as films

Photochromic indolylfulgimides covalently attached to polymers have beneficial properties for optical switching. A 3-indolylfulgide and two 3-indolylfulgimides with one or two polymerizable styrene groups attached on the nitrogen atom(s) were synthesized. Copolymerization with methyl methacrylate (MMA) provided linear copolymers (one styrene group) or a cross-linked copolymer (two styrene groups). The properties of the monomers and copolymers in toluene or as thin films were characterized. The new copolymers were photochromic (reversible Z-to-C isomerization), absorbed visible light, and revealed good thermal and photochemical stability. At room temperature, all copolymer films showed no loss of absorbance after 5 weeks. At 80 °C in either toluene or as films, the Z-forms copolymers were less stable than the C-form copolymers, which showed little or no degradation after 400 h. The degradation rate due to repeated ring-closing – ring opening cycles was less than 3% per 100 cycles. The cross-linked copolymer showed photochemical stability comparable to monomeric fulgides in toluene, <1% per 100 cycles. In general, the properties of the linear and cross-linked copolymers were similar to the corresponding monomers in toluene. In films, the conformations of the Z-form were restricted due to the matrix indicating that the preparation of films from the C-form is advantageous.     

Preparation of Designer Resins via Living Free Radical Polymerization of Functional Monomers on Solid Support

Merrifield resin is converted to a solid-supported free radical initiator by reacting with the TEMPO-Na. Heating TEMPO-methyl resin with a variety of functionalized styrene and acrylate monomers gives larger resin beads via living free radical polymerization. We have coined the term Rasta resin to describe resin beads prepared in this fashion. The process can be described as a solvent-free suspension polymerization. It is particularly well suited for preparation of resin beads from monomers which contain electrophilic groups that would be destroyed upon suspension polymerization in water. Rasta resins have a novel macromolecular architecture wherein long straight chain polymers bearing reactive functional groups emanate from the phenyl groups of a cross-linked polystyrene core. With judicious choice of co-monomers and polymerization strategy, the solvent affinity, loading capacity, and distance of functionality from the cross-linked core may be controlled giving beads with properties that are tailored to specific uses as synthesis supports and scavenging resins.     

New organic supports for metallocene catalysts applied in olefin polymerizations

Nano-sized latex particles as organic supports for metallocenes applied in olefin polymerizations are introduced. The particles are functionalized with nucleophilic surfaces such as polyethylenoxide (PEO), polypropyleneoxide (PPO) or pyridine units allowing an immobilization of the metallocene catalysts via a non-covalent immobilization process. The latices are obtained by emulsion or miniemulsion polymerization with styrene, divinylbenzene as the crosslinker, and either PEO or PPO functionalized styrene or 4-vinylpyridine for surface functionalization. The supported catalysts, e.g. [Me₂Si(2MeBenzInd)₂ZrCl₂/MAO] on PPO containing latices or Cp₂ZrMe₂/([Ph₃C][B(C₆F₅)₄]) on pyridine functionalized materials were tested in ethylene polymerizations. Remarkably, high activities and excellent product morphologies were obtained. The influence of the degree of surface functionalization on activity and productivity was investigated. Furthermore, the fragmentation of the catalyst was studied by electron microscopy using bismuth-labeled latex particles or by fluorescence and confocal fluorescence microscopy using dye-labeled supports. Finally, a self-immobilizing catalyst/monomer system is presented. It is demonstrated that by using PEO-functionalized olefins, the metallocenes were immobilized on the monomers. Subjecting these mixtures to an ethylene copolymerization, again high activities and productivities as well as polyolefin beads with high bulk densities are observed, indicating that an extra supporting process for controlling the product size and shape of the polyolefins is not necessary for these monomers.     

Synthesis, porous structure, and underwater acoustic properties of macroporous cross-linked copolymer beads

The macroporous and elastomeric beads from polyurethane acrylate (PUA), ethyl methacrylate (EMA), and styrene (St) are prepared by suspension polymerization using n-heptane as porogen and 1,2-divinylbenzene (DVB) as cross-linking agent. The scanning electronic microscope results show that the beads of PUA–EMA–St cross-linked copolymers have many large pores on their surfaces and interiors, and the macroporous sizes are dependent of the copolymer composition and the dosages of cross-linking agents and porogen. Average porous diameters decrease as the dosages of DVB increase and the contents of PUA and porogen decrease. The cross-linked copolymers have two kinds of beads (one with many larger holes on the surface and another with much smaller pores or without pore), when the ratio of PUA to EMA and St is from 6/4 to 4/6. The macroporous and elastomeric beads can improve the underwater acoustic absorption properties of the polyurethane/epoxy (PU/EP) blend elastomer, and the underwater acoustic properties of the composites based on PU/EP blend elastomer and the beads depend mainly on the amounts of the beads and the dosages of porogen.     

Functionalization Conditions of PLGA-PEG-PLGA Copolymer with Itaconic Anhydride

Summary: Biodegradable thermosensitive triblock copolymers based on poly(ethylene glycol) and poly(lactic-co-glycolic acid) (PLGA-PEG-PLGA) prepared via ring opening polymerization were modified by itaconic anhydride (ITA), which gives copolymer both reactive double bonds and functional carboxylic acid groups essential for the reaction with biological active material. Functionalization conditions comprising ITA purification, temperature, time and presence of solvent were optimized with the respect to amount of end-capped ITA. Maximum of 76.6 mol. % of bonded ITA were reached via “one pot” reaction in a bulk at 110 °C after 1.5 h. ITA functionalization thermally stabilized the original copolymer by increasing the initial degradation temperature T_d from 284 °C to 294 °C and changing the negative glass transition temperature (T_g = -1.8 °C) to positive one up to 2.4 °C. The novel functionalized macromonomer can be cross-linked either chemically or physically in order to produce new functionalized hydrogel network applicable as biomedical material in tissue engineering.     

Towards the Chemical Synthesis of Proteins

The chemical total synthesis of proteins using solid supports has made great progress. It is therefore becoming a reality what E. Fischer already predicted in 1902 1 1 Cited from Nobel Lectures—Chemistry 1901-1921, Elsevier, Amsterdam 1966, p. 34.
: “I foresee the time when physiological chemistry… is able to prepare synthetic enzymes.” The synthesis of peptides of up to 20 amino acids by the well-established solid-phase procedure on polymeric supports (SPPS) has made great progress through the development of newer supports. At the same time, methods have emerged which facilitate the separation and characterization of peptides, thus allowing optimization of the synthesis of pure materials. The new supports which enable one to synthesize peptides by a rapid continuous flow procedure are characterized by hydrophilicity, beads of approximately equal size, similar swelling properties in the solvents used for peptide synthesis, and stability at high pressure. With graft copolymers of weakly cross-linked polystyrene and linear polyethylene glycol (PEG), the synthetic cycle for coupling of one amino acid can routinely be reduced to 10–20 min with a concomitant higher yield. With beads of monodispersed graft copolymer of 10 μm diameter, a synthetic cycle can, in principle, be shortened to 1–5 min. By utilizing this high-speed solid-phase procedure, larger peptides up to the size of proteins could also be prepared in a few hours. With newer mass spectroscopic methods such as ion-spray mass spectrometry, peptides of up to a molecular mass of 100 kDa can be characterized, and with the advent of capillary electrophoresis, another very efficient separation tool, besides HPLC, is at our disposal.     

Blend or copolymer? Spectroelectrochemical evidence of copolymerization and blending of two electrochromic monomers

A dipyrromethane functionalized monomer, 5-(4-tert-butylphenyl)dipyrromethane (DP), was synthesized to examine the spectral differences of its copolymer and blend with 3,4-ethylenedioxythiophene. Electrochemical polymerization, copolymerization, and blending of DP were achieved in LiClO₄/Acetonitrile. Spectral and electrochromic properties of products were investigated. Spectral properties of copolymer and blend revealed great differences from each other and also from their corresponding homopolymers. Effect of monomer feed ratio on the spectral properties of copolymer was also investigated.     

Novel organotin-containing diblock copolymer with tunable nanostructures: Synthesis, self-assembly and morphological change

Interesting self-assembly behavior and morphological change of a novel organotin-containing diblock copolymer were firstly reported. The organotin-containing diblock copolymer, poly(methyl methacrylate)-block-poly(acetoxydibutyltin methacrylate) (PMMA-b-PADBTMA), was prepared via RAFT polymerization of ADBTMA with PMMA as the macroCTA and AIBN as the initiator in toluene. Both the FT-IR and TG analysis revealed an incorporation of both co-monomers in the resulted polymer backbone. The ratio of two segments was determined indirectly by TG analysis, gravimetric method and derivative process. All results from the different methods were well matched. And it was found that the morphology of the diblock copolymer could be changed easily from vesicles to nano-particle or cross-linked nano-composite under the ultrasonication or additional Ph₂SnCl₂, respectively. All the morphologies were analyzed by SEM, TEM and DLS. The self-assembly and the morphological change attributed to the strong coordination action between tin atoms and the carbonyl groups among PADBTMA segments.     

Chromatographic Removal of Host Cell DNA from Cellular Products Using Columns Packed with Cationic Copolymer Beads

This paper describes a method for selective removal of DNA from various cellular products using columns packed with cross-linked poly(ethyleneimine) (PEI) beads or cross-linked N,N-dimethylaminopropylacrylamide (DMAPAA) beads. Each bead type showed a high DNA-adsorbing activity under experimental conditions of pH 5.0–9.0 and ionic strength of μ = 0.05–0.4. When γ-globulin was present in solution with DNA under physiological conditions (pH 7.2, μ = 0.17), DNA-removing activity of PEI columns was unsatisfactory because both the DNA and the γ-globulin were adsorbed onto the column. In contrast, DMAPAA columns allowed removal of DNA from various protein solutions contaminated with DNA. DNA concentration in each treated protein solution was below 10 ng mL^?1, and high recovery of proteins was obtained.     

Functionalized cross-linked poly(vinyl alcohol) resins as reaction scavengers and as supports for solid-phase organic synthesis

New hydrophilic poly(vinyl alcohol) (PVA-OH) resins were prepared by an inverse suspension polymerization using epichlorohydrin as a cross-linker. These novel resins swell in a variety of solvents commonly used in solid-phase organic synthesis, such as dicholomethane, dioxane, methanol, tetrahydrofuran, and dimethylformamide. In addition, PVA-OH shows excellent swelling in water. The cross-linked PVA-OH beads were functionalized with an aldehyde group and were tested as scavengers for primary amines in three different reactions: amide bond formation, reductive amination reaction, and urea formation. With 1-2 equiv of the PVA aldehyde resin, all the excess primary amines were successfully scavenged. The utility of PVA-OH resins as solid supports in mono- and dipeptide synthesis was also investigated using symmetrical anhydride and MSNT/MeIm (2,4,6-mesitylenesulfonyl-3-nitro-1,2,4-triazolide in the presence of 1-methylimidazol) methods.     

Radiation-Induced Cross-linking of a Tetrafluoroethylene-Propylene Copolymer

Radiation induced cross-linking of tetrafluoroethylene-propylene copolymer with γ-rays from a ⁶⁰Co source and with electron beam from a Van de Graaff accelerator was investigated.

The soluble fraction of the cross-linked copolymer in tetrahydrofuran was measured to determine the G value of the cross-linking and the probability ratio between cross-linking and chain scission. It was found that the tetrafluoroethylene-propylene copolymer can be cross-linked as well as polyethylene (i.e., G = 3). Moreover, it was also found that the copolymer could be cross-linked without chain scission under the absence of oxygen.

The cross-linking occurs mainly by the abstraction of hydrogen fluoride from polymer chains. This was determined from the analysis of gases evolved from the copolymer by irradiation by means of fluorometric and mass spec-trometric measurements.     

Liquid-phase catalytic oxidation of organic substrates by a recyclable polymer-supported copper(II) complex

Chloromethylated polystyrene beads cross-linked with 6.5 % divinylbenzene were functionalized with 2-(2′-pyridyl) benzimidazole (PBIMH) and on subsequent treatment with Cu(OAc)₂ in methanol gave a polymer-supported diacetatobis(2-pyridylbenzimidazole)copper(II) complex [PS-(PBIM)₂Cu(II)], which was characterized by physicochemical techniques. The supported complex showed excellent catalytic activity toward the oxidation of industrially important organic compounds such as phenol, benzyl alcohol, cyclohexanol, styrene, and ethylbenzene. An effective catalytic protocol was developed by varying reaction parameters such as the catalyst and substrate concentrations, reaction time, temperature, and substrate-to-oxidant ratio to obtain maximum selectivity with high yields of products. Possible reaction mechanisms were worked out. The catalyst could be recycled five times without any metal leaching or much loss in activity. This catalyst is truly heterogeneous and allows for easy work up, as well as recyclability and excellent product yields under mild conditions.     

Poly(N-isopropylacrylamide) thermoresponsive cross-linked conjugates containing polymeric soybean oil and/or polypropylene glycol

Synthesis, characterization and solution properties of a new series of the PNIPAM-soybean oil and/or polypropylene glycol, PPG, conjugates (conjugates also referred to as co-networks) have been described. For this purpose free radical polymerization of NIPAM monomer was initiated by macroinitiators based on PSB and/or PPG in order to obtain PSB-g-PNIPAM, PPG-g-PNIPAM and PSB-g-PPG-g-PNIPAM cross-linked graft copolymers. The autooxidation of soybean oil under air at room temperature rendered waxy soluble polymeric soybean oil peroxide associated with cross-linked parts. The soluble polymeric oil macro-peroxide isolated from the cross-linked part was used to initiate the free radical polymerization of NIPAM to give PSB-g-PNIPAM cross-linked copolymer. To obtain PPG-macromonomeric initiator, PPG-MIM, PPG-bis amino propyl ether with Mn 400 (or 2000) Dalton was reacted with 4,4′-azo bis cyanopentanoyl chloride and methacryloyl chloride, respectively. PPG-MIM also initiated the free radical polymerization of NIPAM at 80 °C to yield PPG-g-PNIPAM cross-linked thermoresponsive product. In order to obtain PSB-g-PPG-g-PNIPAM cross-linked triblock copolymer, NIPAM was polymerized by using the mixture of two macroinitiators, PSB and PPG-MIM. PSB contents in the graft copolymers were calculated via elemental analysis of nitrogen in graft copolymers. Thermal analysis, SEM, FTIR and ¹H NMR techniques were used in the characterization of the products. The effect of polymeric soybean oil, PSB, and/or PPG on the thermal response rate of poly(N-isopropylacrylamide, PNIPAM, cross-linked-graft copolymers swollen in water has been investigated by means of swelling-deswelling and drug release behaviors against to temperature change. Lower critical solution temperatures (LCST) of the cross-linked PNIPAM conjugates (conjugates also referred to as co-networks) were determined from the curves of swelling degrees versus solution temperatures. The response temperature of the hydrophobically modified PNIPAM conjugates was reduced to 27 °C, 23 °C and 27 °C for PSB-g-PNIPAM, PPG-g-PNIPAM and PSB-g-PPG-g-PNIPAM, respectively. We have found that the graft copolymers were not pH-responsive. In addition, higher pH ranges cause the hydrolysis of the PSB ester linkages, quickly and makes the cross-linked graft copolymers soluble.The fastest shrinking of the gels was observed by loosing water between 65% and 98% at 50 °C.Methyl orange (MO), was used as a model drug, loaded into cross-linked graft copolymers to examine and compare the effects of controlled release at lower and higher temperatures of lower critical solution temperature (LCST).     

Synthesis of crosslinked resin based on methacrylamide, styrene and divinylbenzene obtained from polymerization in aqueous suspension

A series of porous copolymer beads based on methacrylamide (MA), styrene and divinylbenzene (DVB) was prepared by aqueous suspension polymerization in the presence of diluents to act as precipitants. As MA is totally soluble into aqueous phase, the use of two types of phase transfer agent was investigated, namely: TritonX-100^TM [polyoxyethylene-(10)-isooctylphenyl-ether] and tetrabutylammonium perchlorate. The effect of the diluents on the surface appearance and the porous structure of copolymer beads was studied. Suitable particle stabilisation was achieved by using a combination of two suspension agents, namely: gelatin and 2-hydroxy-ethyl-cellulose. The network resins were characterized by optical and scanning electron microscopy, IR spectroscopy, elemental analysis (CHN), apparent density, swelling in different solvents and specific area by BET method. It was observed that the MA incorporation was more effective when Triton^TM was employed as phase transfer agent.     

Studies on copolymerization of N-isopropylacrylamide with poly(ethylene glycol) methacrylate

The paper describes the preparation and characterization of cross-linked homopolymers and copolymers of N-isopropyl acrylamide (NIPAAm) with poly(ethylene glycol) methacrylate (PEGMA, M_n = 526 g/mol). Several copolymer samples were prepared by taking varying amounts of monomers i.e. NIPAAm and PEGMA in the initial feed using hydrophilic (IRGACURE-2959) and hydrophobic (DURACURE-1173) photoinitiator. In order to investigate the effect of reaction conditions, copolymers were prepared below or above the lower critical solution temperature (LCST) using water or water:ethanol (50:50) as solvent and by varying the amounts of cross-linker. Hydrogels prepared under varying reaction conditions were characterized for its swelling behaviour (using optical microscope), phase transition temperature (using DSC) and morphology (using SEM). As expected LCST increased from 35 to 39 °C as PEGMA content in copolymers increased from 1 to 20% (w/w). However, the morphology of hydrogels was found to be independent on the reaction conditions.Copolymer films having an optimum combination of swelling and performance properties were evaluated as switchable cell culture membranes. Hepatic cancer cell lines (Hep G-2) was used to study the cell growth and detachment. Cell growth and detachment were found to be dependent on the copolymer composition. Cell viability was found comparable to trypsin which also supports application of these films as cell culture membrane.     

Enantioselective allylic alkylation using polymer-supported palladium catalysts

Chiral 2′-(4″,5″-dihydro-2″-oxazolyl)-6′-(1-hydroxyalkyl)pyridines were grafted via ester-linkages directly to cross-linked polystyrene and to polyethyleneglycol-containing resins TentaGel and ArgoGel functionalized with carboxylic acid groups or via spacers containing a carboxylic acid group. The polymeric ligands were used in the palladium-catalyzed substitution of rac-1,3-diphenyl-2-propenyl acetate with dimethyl malonate. The enantioselectivities (up to 80% ee) were similar to those observed employing an analogous monomeric catalyst.     

Synthesis, characterization and degradability of the novel aliphatic polyester bearing pendant N-isopropylamide functional groups

The synthesis, characterization, and degradability of the novel aliphatic polyester bearing pendant N-isopropylamide functional group are reported for the first time. 2-(N-Isopropyl-2-carbamoylethyl)cyclohexanone (CCH) was first synthesized by the Michael reaction of N-isopropylacrylamide with cyclohexanone and was subsequently converted into 6-(N-isopropyl-2-carbamoylethyl)-?-caprolactone (CCL) by the Baeyer-Villiger oxidation reaction using 3-chloroperoxybenzoic acid (mCPBA) as the oxidant. Finally, the novel functionalized poly(?-caprolactone) bearing the pendant N-isopropylamide functional groups, poly(6-(N-isopropyl-2-carbamoylethyl)-?-caprolactone-co-?-caprolactone)s (poly(CCL-co-CL)), were carried out successfully by bulk ring-opening polymerization of CCL and ?-CL initiated by Sn(Oct)₂. Poly(CCL-co-CL) were characterized by ¹H NMR, ¹³C NMR, SEC and DSC. The copolymer containing 9.1 mol% CCL formed flexible films and was used to study its degradability. A phosphate buffer (pH = 7.4) with temperature 37 °C was adopted to proceed the degrading study all through. Compared with poly(?-caprolactone), the hydrolytic degradation of poly(CCL-co-CL) was much faster, which is confirmed by the weight loss and change of intrinsic viscosity.