New promising phosphors Ba3InB9O18 activated by Eu/Tb

Borate Ba₃InB₉O₁₈ (BIBO) has been adopted as a host material for phosphors for the first time. Lanthanide ions (Eu³⁺/Tb³⁺)-doped BIBO phosphors have been synthesized by solid-state reaction and luminescent properties investigated under ultravoilet (UV) excitation. For red phosphor BIBO:Eu, dominant emission peaking at 590 nm was attributed to ⁵D₀→⁷F₁ transition of Eu³⁺, which confirmed that the local site of Eu³⁺ occupied by In³⁺ ion in BIBO crystal lattice is at inversion symmetry center. Optimum Eu³⁺ concentration of BIBO:Eu under UV excitation with 227 nm wavelength is around 40%. The green phosphor BIBO:Tb showed bright green emission at 550 with 232 nm light excited and optimal of Tb³⁺ concentration measured in BIBO is about 8%. The corresponding luminescence mechanisms of Ln-doped BIBO (Ln=Eu³⁺/Tb³⁺) were analyzed. The luminescent intensity of Tb³⁺ can be significantly improved by co-doping of Bi³⁺ in the BIBO:Tb lattice. The likely reason was proposed in terms of the different interactions of the host lattice with these ions, and of these ions with each other.     

用正电子湮没研究钙钛矿结构压电陶瓷中的点缺陷

用正电子湮没寿命谱技术对有意掺杂的或被杂质替代的钙钛矿结构压电陶瓷中的点缺陷进行了研究.掺杂了La³⁺的PbTiO₃，掺杂了Sr²⁺，Cd²⁺和La³⁺的Pb(Mg_1/3Nb_2/3)_0.375Ti_0.375Zr_0.25O₃，掺杂了Ca²⁺的BaT 关键词：     

The luminescence of bismuth and europium in Ca4YO(BO3)3

A series of Bi³⁺/Eu³⁺ singly and doubly activated Ca₄YO(BO₃)₃ phosphors were synthesized by solid-state reaction method. The structures and photoluminescent properties of the phosphors were investigated at room temperature. Under UV excitation Bi³⁺ and Eu³⁺ show a high light output. Ca₄YO(BO₃)₃:Eu³⁺ has potential application as a phosphor for fluorescent lamps. The luminescence of Bi³⁺ and Eu³⁺ in Ca₄YO(BO₃)₃ resembles more that in the rare earth oxides than that in borates. The free oxygen ion in the host lattice, which is not bonded to any boron ions seems to be responsible for that. In this host lattice energy migration between linear Eu³⁺ chains occurs. The emission of Bi³⁺ is completely quenched when Eu³⁺ is co-doped. A model was proposed to explain it.     

Lattice relaxation and charge-transfer optical transitions due to self-trapped holes in nonstoichiometric LaMnO3 crystal

We explore the role of electronic and ionic polarization energies in the physics of “colossal” magnetoresistive (CMR) materials. We use the Mott-Littleton approach to evaluate polarization energies in the LaMnO₃ lattice associated with holes localized on both the Mn³⁺ cation and the O^2?anion. The full (electronic and ionic) lattice relaxation energy for a hole localized at the O site is estimated at 2.4 eV, which is appreciably greater than that of 0.8 eV for a hole localized at the Mn site, indicating a strong electron-phonon interaction in the former case. The ionic relaxation around the localized holes differs for anion and cation holes. The relaxation associated with Mn⁴⁺ is approximately isotropic, whereas ionic displacements around O^? holes show axial symmetry with the axis directed towards the apical oxygens. Using the Born-Haber cycle, we examine thermal and optical energies of the hole formation associated with the electron ionization from Mn³⁺, O^2?, and La³⁺ions in the LaMnO₃ lattice. For these calculations, we derive a phenomenological value for the second electron affinity of oxygen in the LaMnO₃ lattice by matching the optical energies of the La⁴⁺ and O^? hole formation with maxima of binding energies in the experimental photoemission spectra. The calculated thermal energies predict that the electronic hole is marginally more stable in the Mn⁴⁺ state in the LaMnO₃ host lattice, but the energy of a hole in the O^? state is only higher by a small amount, 0.75 eV, suggesting that both possibilities should be treated seriously. We examine the energies of a number of fundamental optical transitions, as well as those involving self-trapped holes of Mn⁴⁺ and O^? in the LaMnO₃ lattice. The reasonable agreement of our predicted energies, linewidths, and oscillator strengths with experimental data leads us to plausible assignments of the optical bands observed. We deduce that the optical band near 5 eV is associated with the O(2p)-Mn(3d) transition of a charge-transfer character, whereas the band near 2.3 eV is rather associated with the presence of Mn⁴⁺ and/or O^? self-trapped holes in the nonstoichiometric LaMnO₃ compound.     

Spectroscopic properties, energy transfer and structural analysis of Sr2CeO4:M+ and Sr2CeO4:Eu3+, M+ (M+ = Li+, Na+, K+)

The room-temperature luminescent emission characteristics of Sr₂CeO₄:M⁺ and Sr₂CeO₄:Eu³⁺,M⁺ (M⁺ = Li⁺, Na⁺, K⁺) have been investigated under UV excitation. By introducing appropriate alkali metal cations dopants (Li⁺, Na⁺, K⁺) into the crystalline lattice, not only emission color of the blue-white-emitting Sr₂CeO₄ doped with low Eu³⁺ content can be tuned to green, but also the red emission intensity of Sr₂CeO₄ doped with high Eu³⁺ concentration is strengthened significantly. The relevant mechanisms have been elucidated in detail.     

Magnetic properties of LiNi<Subscript>0.5</Subscript>Mn<Subscript>0.47</Subscript>Al<Subscript>0.03</Subscript>O<Subscript>2</Subscript> as positive electrode for Li-ion batteries

The layered LiNi_0.5Mn_0.47Al_0.03O₂ was synthesized by wet chemical method and characterized by X-ray diffraction and analysis of magnetic measurements. The powders adopted the α-NaFeO₂ structure. This substitution of Al for Mn promotes the formation of Li(Ni_0.47²⁺Ni_0.03³⁺Mn_0.47⁴⁺Al_0.03³⁺)O₂ structures and induces an increase in the average oxidation state of Ni, thereby leading to the shrinkage of the lattice unit cell. The concentration of antisite defects in which Ni²⁺ occupies the (3a) Li lattice sites in the Wyckoff notation has been estimated from the ferromagnetic Ni²⁺(3a)–Mn⁴⁺(3b) pairing observed below 140 K. The substitution of 3% Al for Mn reduces the amount of antisite defects from 7% to 6.4–6.5%. The analysis of the magnetic properties in the paramagnetic phase in the framework of the Curie–Weiss law agrees well with the combination of Ni²⁺ (S = 1), Ni³⁺ (S = 1/2) and Mn⁴⁺ (S = 3/2) spin-only values. Delithiation has been made by the use of K₂S₂O₈. According to this process, known to be softer than the electrochemical one, the nickel ions in the (3b) sites are converted into Ni⁴⁺ in the high spin configuration, while Ni²⁺(3a)–Mn⁴⁺(3b) ferromagnetic pairs remain, as the Li⁺(3b) ions linked to the Ni²⁺(3a) ions in the antisite defects are not removed. The results show that the antisite defect is surrounded by Mn⁴⁺ ions, implying the nonuniform distribution of the cations in agreement with previous NMR and neutron experiments.     

Hydrothermal-assisted ion exchange synthesis and photoluminescence of Li+ and Eu3+ co-doped NaLa(WO4)2 as near-UV type red phosphors

A series of Li⁺ and Eu³⁺ co-doped double tungstate NaLa(WO₄)₂ (NLW) red phosphors have been successfully synthesized by an ion exchange method under a hydrothermal condition. The effects of Li⁺ doping concentration on the crystal structure, morphology and photoluminescence properties were investigated using the XRD, TEM and photoluminescence (PL) measurements. The results reveal that the samples have phase-pure scheelite structure and adopt spherical particle morphology. Furthermore, room temperature PL spectrum shows that the optical brightness is highly dependent on the concentration of doping Li⁺, which is determined by ion exchange duration and the precursor concentration of LiNO₃. As 5% Li⁺ ions was introduced into the crystal lattice, the emission intensity was enhanced by more than 10-fold as compared with the pristine one. Moreover, the co-doping of Li⁺ can substantially improve the effective excitation of the NaLa(WO₄)₂:Eu³⁺ phosphors under near-UV region.     

Spectra of europium-doped yttrium oxide and yttrium vanadate phosphors

The spectral distributions of the visible absorption and fluorescence emission under electron beam excitation of Eu³⁺-doped (Y₂O₃) and (YVO₄) powders have been detected and analyzed. (Y₂O₃: Eu³⁺) has a cubicC crystal structure with a unit cell dimension a=10·61 Å. Its observed transitions from⁷ F ₀ to many upper states have been recognized; the observed number of Stark components is in agreement with that based on theC ₂ site symmetry of the Eu³⁺ ion in Y₂O₃. Eu³⁺-doped yttrium vanadate has a typical zircon tetragonal crystal structure with unit cell dimensions ofc=6·29 Å anda=7·11 Å. The observed transitions in (Eu³⁺: YVO₄) have been identified and assigned in accordance with theD _2d site symmetry of the Eu³⁺ ion in this lattice.The authors would like to express their deep gratitude to Professor G. F. J.Garlick, University of Hull, England, for offering experimental facilities in his Physics Department.     

Effects of doping site and pre-sintering time on microstructure and magnetic properties of Fe-doped BaTiO3 ceramics

The A-site substituted BaTiO₃ ceramics were prepared by solid-state reaction via partial substitution of Fe for Ba²⁺. By comparison with the B-site substituted sample made under similar conditions, the effect of Fe doping site on microstructure and magnetism was investigated using X-ray diffraction, Mössbauer spectroscopy and vibrating sample magnetometer. It is found that A-site substitution can be realized to a certain extent at 7 at% Fe addition, whereas impurities are observed at higher Fe concentrations. In the nominal (Ba_0.93Fe_0.07)TiO₃ sample, the Fe ions are present as Fe²⁺ and Fe³⁺, respectively, replacing A-site Ba²⁺ and octahedral B-site Ti⁴⁺ in hexagonal perovskite lattice. The double-exchange Fe²⁺-O²⁻-Fe³⁺ interactions produce ferromagnetism well above room temperature, but the saturation magnetization and the Curie temperature are both obviously lower than those for B-site substitution due to different magnetic exchange mechanisms. In the B-site substituted sample Ba(Ti_0.93Fe_0.07)O₃, the super-exchange interactions between Fe³⁺ on pentahedral and octahedral Ti⁴⁺ sites are responsible for ferromagnetism. These results mean that B-site substitution is a better way for Fe-doped BaTiO₃ system to obtain high-Curie-temperature ferromagnetism. Moreover, increasing pre-sintering time can further improve the magnetism of B-site substituted samples, through which the saturation magnetization for Ba(Ti_0.93Fe_0.07)O₃ is enhanced ∼6 times.     

Dielectric properties and substitution preference of yttrium doped barium zirconium titanate ceramics

The dielectric properties of Ba(Zr_0.25Ti_0.75)O₃+xY ₂O₃ ceramics are investigated. We believe that, integrating with the lattice parameters, there is an alternation of substitution preference of yttrium ions for the host cations in perovskite lattice that is responsible for the Curie point. The T_c rises with the increase of Y ³⁺ doping when the doping content is less than 0.05 at%, owing to the replacement of Y ³⁺ ions for Ba²⁺ ions at the A-site; when the Y ³⁺ content is more than 0.05 at%, Y ³⁺ ions tend to occupy the B-site in perovskite lattice, causing a drop of T_c. Owing to the modifications of Y ³⁺ doping, the loss tangent of BZT ceramics is depressed remarkably, making it a superior candidate to replace widely used lead-contained ceramics.     

Engineering lattice matching, doping level, and optical properties of KY(WO4)2:Gd, Lu, Yb layers for a cladding-side-pumped channel waveguide laser

Single-crystalline KY_1?x?y?z Gd_xLu_yYb_z(WO₄)₂ layers are grown onto undoped KY(WO₄)₂ substrates by liquid-phase epitaxy. The purpose of co-doping the KY(WO₄)₂ layer with suitable fractions of Gd³⁺ and Lu³⁺ is to achieve lattice-matched layers that allow us to engineer a high refractive-index contrast between waveguiding layer and substrate for obtaining tight optical mode confinement and simultaneously accommodate a large range of Yb³⁺ doping concentrations by replacing Lu³⁺ ions of similar ionic radius for a variety of optical amplifier or laser applications. Crack-free layers, up to a maximum lattice mismatch of ~0.08 %, are grown with systematic variations of Y³⁺, Gd³⁺, Lu³⁺, and Yb³⁺ concentrations, their refractive indices are measured at several wavelengths, and Sellmeier dispersion curves are derived. The influence of co-doping on the spectroscopy of Yb³⁺ is investigated. As evidenced by the experimental results, the lattice constants, refractive indices, and transition cross-sections of Yb³⁺ in these co-doped layers can be approximated with good accuracy by weighted averages of data from the pure compounds. The obtained information is exploited to fabricate a twofold refractive-index-engineered sample consisting of a highly Yb³⁺-doped tapered channel waveguide embedded in a passive planar waveguide, and a cladding-side-pumped channel waveguide laser is demonstrated.     

Self-activated Nd:Ba2NaNb5O12 optical super-lattices: Micro characterization and non-collinear laser light generation

Czochralsky grown Nd³⁺-ion doped barium sodium niobate (Ba₂NaNb₅O₁₂, “banana”) optical super-lattices have been characterized by a combination of chemical etching, optical microscopy, micro-Raman and micro-photoluminescence experiments. The presence of ferroelectric domains, induced during growth process, is accompanied by a periodic modulation of Nd³⁺-ion concentration as well as by a small lattice distortion. When Nd³⁺-ion laser action at ≈1.06 μm is achieved under 0.808 μm laser diode pumping, the singularities of refractive index caused by opposed ferroelectric domains lead to non-collinear intra-cavity propagation.     

Fluorescence of Mn2+ in CaCO3

The fluorescence of Mn²⁺ ion as impurity in CaCO₃ has been investigated. Emission bands from the ⁴D(E_g), ⁴D(T_2g) and ⁴G(T_1g) levels have been observed. The analysis of excitation and emission spectra has allowed to obtain the values of field strength (Dq) for the excited energy levels of Mn²⁺ in CaCO₃ lattice. The temperature dependence of excitation and emission spectra yield an activation energy for thermal quenching of luminescence very close to theoretical calculation. The behaviour of luminescence lifetime with temperature has also been obtained.     

Photoluminescence and thermoluminescence characterization of Eu- and Dy -activated Ca3(PO4)2 phosphor

Rare-earth-doped polycrystalline Ca₃(PO₄)₂:Eu, Ca₃(PO₄)₂:Dy and Ca₃(PO₄)₂:Eu,Dy phosphors prepared by a modified solid-state synthesis has been studied for its X-ray diffraction, thermoluminescence (TL) and photoluminescence (PL) characteristics. The PL emission spectra of the phosphor suggest the presence of Eu³⁺ ion in Ca₃(PO₄)₂:Eu and Dy³⁺ ion in Ca₃(PO₄)₂:Dy lattice sites. The TL glow curve of the Ca₃(PO₄)₂:Eu compounds has a simple structure with a prominent peak at 228 °C, while Ca₃(PO₄)₂:Dy peaking at 146 and 230 °C. TL sensitivity of phosphors are compared with CaSO₄: Dy and found 1.52 and 1.20 times less in Ca₃(PO₄)₂:Eu and Ca₃(PO₄)₂:Dy phosphors, respectively. The Ca₃(PO₄)₂:Eu,Dy phosphors shows switching behavior under two different excitation wavelengths and enhancement in PL intensity of Dy³⁺ ions were reported. The paper discusses the photoluminescence and thermoluminescence behavior of Eu³⁺ and Dy³⁺ ion in Ca₃(PO₄)₂ hosts, it may be applicable to solid-state lighting as well as thermoluminescence dosimetry applications.     

Theoretical investigation of the optical spectra and local lattice structure for Mn5+ in a Sr10(VO4)6F2 crystal

In this paper, the relationships between the optical spectra and local lattice structure for Mn⁵⁺ in a Sr₁₀(VO₄)₆F₂ crystal are established by the crystal- and ligand-field theory. The effect of spin–orbital coupling between the central 3d² ions and ligand ions has been considered in the full energy matrix. Using the matrix and superposition model formula, we have calculated the optical spectra and local lattice structure parameters of Mn⁵⁺ in Sr₁₀(VO₄)₆F₂ with a C_3v system. The calculated results are in good agreement with the observed values. In addition, the trigonal compressed distortions of the (MnO₄)^3? centers in Sr₁₀(VO₄)₆F₂ crystals are also obtained from the calculations.     

Optical spectrum, local lattice structure and EPR g factors for Cr impurity ions in MgTiO3 and LiTaO3

On the basis of the 120×120 complete energy matrices for a d³ configuration ion in a trigonal ligand field, for Cr³⁺ ions doped in MgTiO₃ and LiTaO₃, the local structures and EPR g factors of the octahedral (CrO₆)⁹⁻ clusters have been studied, respectively. By simulating the calculated optical spectra and the EPR spectra data to the experimental results, local structure parameters are obtained. The calculated results show that although the local lattice structures around the M (M=Mg²⁺, Ta⁵⁺) ions are obviously different, after Cr³⁺ replacing the M, the local lattice structures around the Cr³⁺ ions are quite similar and close to those of the Cr₂O₃. This may be ascribed to the fact that the octahedral Cr³⁺ center in MgTiO₃:Cr³⁺ and LiTaO₃:Cr³⁺ systems and that in Cr₂O₃ exhibit similar octahedral (CrO₆)⁹⁻ clusters. Moreover, the corresponding theoretical values of the optical spectra have been reported. It is also found that the orbital reduction factor k is very important to understand the EPR g factors for Cr³⁺ ions doped in MgTiO₃ and LiTaO₃.     

The luminescent properties of CaYBO4:Ln(Ln=Eu, Tb) under UV-VUV range

The luminescent properties of CaYBO₄:Ln(Ln=Eu³⁺, Tb³⁺) were investigated under ultraviolet (UV) and vacuum ultraviolet (VUV) region. The CT band of Eu³⁺ at about 245 nm blue-shifted to 230 nm in VUV excitation spectrum; the band with the maximum at 183 nm was considered as the host lattice absorption. For the sample of CaYBO₄:0.08Tb³⁺, the bands at about 235 and 263 nm were assigned to the f-d transitions of Tb³⁺ and the CT band of Tb³⁺ was calculated according to Jφrgensen's theory. Under UV and VUV excitation, the main emission of Eu³⁺ corresponding to the ⁵D₀-⁷F₂ transition located at about 610 nm and two intense emission of Tb³⁺ from the ⁵D₄-⁷F₅ transition had been observed at about 542 and 552 nm, respectively. With the incorporation of Gd³⁺ into the host lattice of CaYBO₄, the luminescence of Tb³⁺ was enhanced while that of Eu³⁺ was decreased because of their different excitation mechanism.     

Enhanced UVB emission and analysis of chemical states of Ca5(PO4)3OH:Gd3+,Pr3+ phosphor prepared by co-precipitation

Hydroxyapatite (Ca₅(PO₄)₃OH) is a well-known bioceramic material used in medical applications because of its ability to form direct chemical bonds with living tissues. This mineral is currently used as a host for rare-earth ions (e.g. Gd³⁺, Pr³⁺, Tb³⁺, etc.) to prepare phosphors that can be used in light emitting devices of different types. In this study Ca₅(PO₄)₃OH:Gd³⁺,Pr³⁺ phosphors were prepared by the co-precipitation method and were characterised by x-ray diffraction, x-ray photoelectron spectroscopy, scanning electron microscopy, high resolution transmission electron microscopy, energy dispersive x-ray spectroscopy and photoluminescence spectroscopy. The x-ray diffraction pattern was consistent with the hexagonal phase of Ca₅(PO₄)₃OH referenced in JCPDS card number 73-0293. The x-ray photoelectron spectroscopy data indicated that Ca²⁺ occupied two different lattice sites, referred to as Ca1 and Ca2. The photoluminescence data exhibited a narrowband emission located at 313 nm, which is associated with the ⁶P_7/2→⁸S_7/2 transition of the Gd³⁺ ion. This emission is classified as ultraviolet B and it is suitable for use in phototherapy lamps to treat various skin diseases. The photoluminescence intensity of the 313 nm emission was enhanced considerably by Pr³⁺ co-doping.     

EPR parameters and local lattice structure study of V ions in CdCl2 and CsMgCl3 crystals

The local lattice structure and EPR parameters (D, g_‖, g_⊥) have been studied systematically on the basis of the complete energy matrix for a d³ configuration ion in a trigonal ligand field. By simulating the calculated optical and EPR spectra data to the experimental results, the local distortion parameters (ΔR, Δθ) are determined for V²⁺ ions in CdCl₂ and CsMgCl₃ crystals, respectively. The results show that the local lattice structure of CdCl₂:V²⁺ system exhibits a compression distortion (ΔR=−0.0868 Å) while that of CsMgCl₃:V²⁺ system exists an elongation distortion (ΔR=0.0165 Å). The different distortion may be ascribed to the fact that the radius of V²⁺ ion is smaller than that of Cd²⁺ ion or larger than that of Mg²⁺ ion. Moreover, the relationships between EPR parameter D and local structure parameters (R, θ) as well as the orbital reduction factor k and g‐factors (g_‖, g_⊥) are discussed.     

Structural,photoluminescent, and dielectric properties of Eu3+-doped Ba0.7Sr0.3TiO3 thin films

Eu³⁺-doped Ba_0.7Sr_0.3TiO₃ thin films were prepared by a chemical solution deposition method and characterized by X-ray diffraction, field emission scanning electron microscopy, photoluminescence and dielectric measurements. The thin films were well crystallized with a pure perovskite structure. A contraction of the unit cell was observed upon incorporation of Eu³⁺ ions below 2 mol%, while an expansion occurred as the Eu³⁺ concentration was further increased above 2 mol%, indicating that Eu³⁺ ions with different concentrations occupied different lattice sites. Photoluminescence spectra showed two prominent transitions of Eu³⁺ ions at 594 nm (⁵D₀ → ⁷F₁) and 618 nm (⁵D₀ → ⁷F₂) upon excitation at 395 nm (⁷F₀ → ⁵L₆). There existed two quenching concentrations at 2 mol% and 4 mol% due to different lattice sites of the Eu³⁺ ions. We also investigated the dielectric properties of the thin films. Our study suggests that Eu³⁺-doped Ba_0.7Sr_0.3TiO₃ thin films have potential applications in multifunctional optoelectronic devices.