The near field behavior of turbulent gas jets in a long confinement

The present investigation reports on the near field behavior of gas jets in a long confinement and points out the differences between this type of jet flow and those of free jets and jets in a short confinement.The jet, with a diameter of 8.73 mm, is aligned concentrically with a tube of 125 mm diameter; thus giving a confinement area ratio of 205. The arrangement forms part of the test section of an open-jet wind tunnel and this gives a confinement length-to-jet diameter ratio of 1,700. Experiments are carried out with carbon dioxide, air and helium/air jets at different jet velocities. Mean velocity and turbulence measurements are made of the jet near field using a one-color, one-component laser doppler velocimeter operating in the forward scatter mode. In addition, the turbulent shear field of an air jet is examined in more detail using hot-wire anemometers.In view of the long confinement, the presence of the jet is not being felt immediately at the tunnel exit. Consequently, the air column inside the tunnel is first compressed by the jet and then slowly pushed out of the tunnel. This behavior causes the jet to spread rapidly and to decay quickly. As a result, an equilibrium turbulence field is established in the first two diameters of the jet. This equilibrium field bears striking similarity to that found in self-preserving, turbulent free jets and jets in short confinement and is independent of jet fluid densities and velocities. In terms of these characteristics, the near field of jets in a long confinement is very different from that found in free jets and jets in short confinements.     

Axisymmetric and non-axisymmetric instability of an electrically charged viscoelastic liquid jet

A linear analysis is performed to investigate the competition between axisymmetric and non-axisymmetric instability of an electrically charged viscoelastic liquid jet. The liquid is assumed to be a dilute polymer solution modeled by the Oldroyd-B constitutive equation. As to its electric properties, the liquid is assumed to be of finite electrical conductivity and is described by the Taylor–Melcher leaky dielectric theory. An analytical dispersion relation is derived and the temporal growth rate is solved numerically. Two viscoelastic liquids, i.e. a PEO aqueous solution and a PIB Boger fluid, are taken as examples to study the effects of electric field and electrical conductivity on jet instability. The result shows that electric field basically destabilizes both the axisymmetric and the non-axisymmetric mode. On the other hand, the effect of electrical conductivity on the modes is quite limited. An energy analysis shows that elasticity enhances both axisymmetric and non-axisymmetric jet instability and its destabilization effect on the axisymmetric mode is more profound. For viscoelastic jets of high Deborah numbers the combined effect of viscosity and elasticity is possibly characterized by an equivalent Reynolds number related only to the viscosity of solvent.     

Temporal analysis of breakup for a power law liquid jet in a swirling gas

The breakup mechanism and instability of a power law liquid jet are investigated in this study. The power law model is used to account for the non-Newtonian behavior of the liquid fluid. A new theoretical model is established to explain the breakup of a power law liquid jet with axisymmetric and asymmetric disturbances, which moves in a swirling gas. The corresponding dispersion relation is derived by a linear approximation, and it is applicable for both shear-thinning and shear-thickening liquid jets. Analysis results are calculated based on the temporal mode. The analysis includes the effects of the generalized Reynolds number, the Weber number, the power law exponent, and the air swirl strength on the breakup of the jet. Results show that the shear-thickening liquid jet is more unstable than its Newtonian and shear-thinning counterparts when the effect of the air swirl is taken into account. The axisymmetric mode can be the dominant mode on the power law jet breakup when the air swirl strength is strong enough, while the non-axisymmetric mode is the domination on the instability of the power liquid jet with a high We and a low Re _n . It is also found that the air swirl is a stabilizing factor on the breakup of the power law liquid jet. Furthermore, the instability characteristics are different for different power law exponents. The amplitude of the power law liquid jet surface on the temporal mode is also discussed under different air swirl strengths.     

电场作用下导电射流稳定性的理论与实验研究

建立导电射流在径向电场作用下的线性稳定性粘性模型,通过正则模方法,推导了轴对称和非轴对称模态下的色散关系,通过计算求得增长率随波数及电欧拉数的变化,并在理论上预测了最有可能波长.选用酒精和酒精甘油混合物作实验液体,观察了径向电场对射流不稳定性行为的影响规律,并测量射流表面波的波长.实验结果和理论结果在定性方面取得了较好的一致.但通过与实验比较,理论预测的最有可能波长在非轴对称模态出现较大偏差,普遍比实验结果小.而且,实验表明,最大增长率并不是判断主导模态的好标准,因为在非轴对称的最大增长率小于轴对称的最大增长率情况下,实验显示非轴对称模态要比轴对称模态明显了.因此,对于非轴对称的不稳定机理,需要进一步研究.对轴对称模态,理论给出了较好的预测.     

Solution of the problem of flow of a non-axisymmetric swirling submerged jets

This paper considers the problem of a non-axisymmetric swirling jet of an incompressible viscous fluid flowing in a space flooded with the same fluid. The far field of the jet is studied under the assumption that the angular momentum vector corresponding to the swirling of the jet is not collinear to the momentum vector of the jet. It is shown that the main terms of the asymptotic expansion of the full solution for the velocity field are determined by the exact integrals of conservation of momentum, mass, and angular momentum. An analytical solution of the problem describing the axisymmetric swirling jet is obtained.     

Wall jet similarity of impinging planar underexpanded jets

Velocity profiles and wall shear stress values in the wall jet region of planar underexpanded impinging jets are parameterized based on nozzle parameters (stand-off height, jet hydraulic diameter, and nozzle pressure ratio). Computational fluid dynamics is used to calculate the velocity fields of impinging jets with height-to-diameter ratios in the range of 15–30 and nozzle pressure ratio in the range of 1.2–3.0. The wall jet has an incomplete self-similar profile with a typical triple-layer structure as in traditional wall jets. The effects of compressibility are found to be insignificant for wall jets with Ma < 0.8. Wall jet analysis yielded power-law relationships with source dependent coefficients describing maximum velocity, friction velocity, and wall distances for maximum and half-maximum velocities. Source dependency is determined using the conjugate gradient method. These power-law relationships can be used for mapping wall shear stress as a function of nozzle parameters.     

A finite difference technique for solving the Newtonian jet swell problem

A finite difference technique that incorporates a numerical mapping has been successfully applied to analyse both planar and axisymmetric Newtonian jets. A pressure gradient equation and a free-surface slope equation have been derived for free-surface iteration. The computation of pressure inside the jet surface using the pressure gradient equation is stable and accurate at high Reynolds numbers. The free-surface slope equation is needed for updating the free surface and is applicable for jets with strong surface tension effects. The present development can simulate the Newtonian jets for Reynolds numbers as high as 2000 and capillary number as low as 10^?5. Numerical predictions by the present technique are close to the results of previous finite element simulations.     

FORCE FIELDS ON INVISCID,SLENDER, ANNULAR LIQUID JETS

Regular perturbation expansions are used to analyse the fluid dynamics of unsteady, inviscid, slender, thin, incompressible (constant density), axisymmetric, upward and downward, annular liquid jets subjected to non-homogeneous, conservative body forces when both the annular jets are very thin and the gases enclosed by and surrounding the jet are dynamically passive. Both inertia- and capillarity-dominated annular jets are considered. It is shown that, for inertia-dominated jets, closure of the leading-order equations is achieved at second order in the perturbation parameter, which is the slenderness ratio, whereas closure is achieved at first order for capillarity-dominated jets. The steady leading-order equations are solved numerically by means of both an adaptive finite difference method which maps the curvilinear geometry of the jet onto a unit square and a fourth-order-accurate Runge–Kutta technique. It is shown that the fluid dynamics of steady, annular liquid jets is very sensitive to the Froude and Weber numbers and nozzle exit angle in the presence of non-homogeneous, conservative body forces. For upward jets with inwardly or axially directed velocities at the nozzle exit the effect of the non-homogeneous, conservative body forces is to increase the leading-order axial velocity component, decrease the jet's mean radius and move the stagnation point downstream. For downward jets with radially outward velocity at the nozzle exit the axial velocity component decreases monotonically as the magnitude of the non-homogeneous, conservative body forces is increased.     

电场作用下无黏聚焦射流的时间不稳定性研究

基于电场作用下的流动聚焦实验建立了简化的理论模型,开展了带电同轴液气射流的时间不稳定性分析.在无黏假设下,得到了扰动在时间域内发展演化的解析形式的色散关系,分析了主要控制参数对不稳定模态的影响.结果表明,只有轴对称扰动和第一类非轴对称扰动在时间域内是增长的;液气界面的表面张力对轴对称扰动有着双重影响而对非轴对称扰动起抑制作用;外层气体的流速以及密度的增加均能促进射流的失稳.这些结论与实验结果是定性一致的.结果也表明,在不考虑初始界面电荷密度时,单一的轴向电场能抑制射流的失稳.      

Influence of nozzle geometry on the near-field structure of a highly underexpanded sonic jet

Detailed near-field structures of highly underexpanded sonic free jets have been investigated with the help of computational fluid dynamics. Two-dimensional, axisymmetric Euler equations have been chosen to predict the underexpanded jets, and the third-order total variation diminishing finite-difference scheme has been applied to solve the system of governing equations numerically. Several different nozzles have been employed to investigate the influence of the nozzle geometry on the near-field structures of highly underexpanded sonic free jets. The results obtained show that the distance from the nozzle exit to the Mach disk is an increasing function of the jet–pressure ratio, which also significantly influences the shape of the jet boundary. The diameter of the Mach disk increases with the jet–pressure ratio, and it is further significantly influenced by the nozzle geometry, unlike the distance of the Mach disk from the nozzle exit. However, such a dependence on the nozzle geometry is no longer found when an effective-diameter concept is taken into account for the flow from a sharp-edged orifice. A good correlation in the diameters of the Mach disk is obtained, so that the near-field structure of highly underexpanded sonic free jets is a unique function of the pressure ratio, regardless of the nozzle geometry.     

On the length of annular jets interacting with an ambient medium

Annular jets of immiscible fluids are the subject of intense study. Particularly topical in applications are jets in the shape of a right circular cylinder. The space within annular jets may be reduced or increased by the influence of transverse forces and also by hydrodynamic instability of the jet flow. Twisting of the jet tends to make it close up. In the present paper, a study is made of ways of obtaining annular jets with nearly cylindrical shape and the greatest cavity length possible, allowance being made for gravity, capillary pressure surface forces, a pressure difference between the two sides of the phase interface, and the interaction with the ambient medium. A study is made of the influence of the velocity of the fluid and the medium in the initial section on the shape of the joint steady axisymmetric flow of immiscible viscous phases, including the shape of the middle surface of the annular jet.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 6, pp. 3–11, November–December, 1983.     

Supersonic liquid jets: Their generation and shock wave characteristics

The generation of high-speed liquid (water and diesel fuel) jets in the supersonic range using a vertical single-stage powder gun is described. The effect of projectile velocity and mass on the jet velocity is investigated experimentally. Jet exit velocities for a set of nozzle inner profiles (e.g. straight cone with different cone angles, exponential, hyperbolic etc.) are compared. The optimum condition to achieve the maximum jet velocity and hence better atomization and mixing is then determined. The visual images of supersonic diesel fuel jets (velocity about 2000 m/s) were obtained by the shadowgraph method. This provides better understanding of each stage of the generation of the jets and makes the study of their characteristics and the potential for auto-ignition possible. In the experiments, a pressure relief section has been used to minimize the compressed air wave ahead of the projectile. To clarify the processes inside the section, additional experiments have been performed with the use of the shadowgraph method, showing the projectile travelling inside and leaving the pressure relief section at a velocity of about 1100 m/s. Received 23 January 2001 / Accepted 2 July 2001     

Large-Eddy Simulations of Forced Three-Dimensional Impinging Jets

Large-eddy simulations of the flow field around twin three-dimensional impinging jets were carried out to simulate the near-ground hover configuration of a vertical takeoff and landing (VTOL) aircraft. Both the impinging jet and the upwash caused by the collision of the wall jets are modeled in this study. The evolution of the vortical structures in the impinging jet flow field, due to the introduction of axisymmetric and azimuthal perturbations at the jet exit, has been investigated. The vortical structures formed in the jet shear layer due to azimuthal forcing, show significant three-dimensional vortex stretching effects when compared to the structures formed during axisymmetric forcing. Breakdown of the large-scale structures into smaller vortices also occurs much earlier during azimuthal forcing. When compared to the upwash formed during axisymmetric forcing, the azimuthally perturbed jet forms an upwash that is less coherent and results in a weaker upload or lift-off force on the aircraft undersurface. Comparison with available experimental data indicates good agreement for the centerline velocity decay, the wall pressure variation and the phase speed of the vortical structures.     

Instabilities of wrinkled membranes with pressure loadings

Wrinkling can affect the functionality of thin membranes subjected to various loadings or boundary conditions. The concept of relaxed strain energy was studied for isotropic, hyperelastic, axisymmetric membranes pressurized by gas or fluid. Non-intuitive instabilities were observed when axisymmetric wrinkled membranes were perturbed with angle dependent displacement fields. A linearized theory showed that static equilibrium states of pressurized membranes, modelled by a relaxed strain energy formulation, are unstable, when the wrinkled surface is subjected to pressure loadings. The theory is extended to the non-axisymmetric membranes and it is shown that these instabilities are local phenomena. Simulations for the pressurized cylindrical membranes with non-uniform thickness and hemispherical membranes support the claims in both theoretical and numerical contexts including finite element simulations.     

Measurement of product concentration of two parallel reactive jets using digital image processing

The chemically sensitive LIF technique [9] is employed to study the mixing of two reactive axisymmetric jets, one of which carries fluorescein, in an ambient quiescent fluid. The degree of mixing depends on the jet spacing and the axial position downstream of the jets and power laws are found to hold for some concentration characteristics. Unlike the far velocity field of dual plane jets, self preservation laws are not found to hold in general for the concentration field.     

An experimental investigation on flow structures of confined and unconfined impinging air jets

The flow characteristics of both confined and unconfined air jets, impinging normally onto a flat plate have been experimentally investigated. The mean and turbulence velocities, and surface pressures were measured for Reynolds numbers ranging from 30,000 to 50,000 and the nozzle-to-plate spacings in range of 0.2–6. Smoke-wire technique is used to visualize the flow behavior. The effects of Reynolds number, nozzle-to-plate spacing and flow confinement on the flow structure are reported. In the case of confined jet, subatmospheric regions occur on both impingement and confinement surfaces at nozzle-to-plate spacings up to 2 for all Reynolds numbers in consideration and they lie up to nearly the same radial location at both surfaces. However, there is no evidence of the subatmospheric region in unconfined jet. It is concluded that there exists a linkage among the subatmospheric region, turbulence intensity and the peaks in heat transfer coefficients for low spacings in impinging jets.     

Axisymmetric jets impinging on porous walls

The flow of axisymmetric turbulent jets impinging on porous walls has been studied experimentally. It is shown how the overall flow structure depends on the porosity of the surface. For high porosities (open area ratios, β, in excess of around 40% say) the porous wall, or screen, leads to a sudden increase in jet width and decrease in mean and fluctuating velocities, a direct consequence of the momentum flux extracted because of the screen drag. Lower porosities can lead to the appearance of radial wall jets on the upstream side of the screen but, in contrast to the corresponding case of planar jet impingement (Cant et al. in Exp Fluids 32:16–26, 2002), such wall jets never occur on the downstream side. The axial downstream velocities thus remain positive for all porosities. Jet growth rates for are initially increased by the screen, but once β≤0.4 momentum extraction by the screen is virtually complete, so that velocities become very small. Again, unlike in the corresponding planar case (for β≈0.4), recirculating regions upstream of the screen never occur. A simple argument is suggested to explain the fundamental differences in flow behaviour between planar and axisymmetric jet impingement onto porous screens and it is concluded that in the latter case the effects of the screen are generally more benign and unsurprising. Nonetheless, these axisymmetric flows, like the corresponding planar ones, provide a serious challenge for computational modelling.     

A study of the flow characteristics in micro-abrasive jets

An experimental study of particle velocities in micro-abrasive jets by using the particle image velocimetry (PIV) technique is presented. It has been found that the particle jet flow has a nearly linear expansion downstream. The particle velocities increase with air pressure, and the increasing rate increases with nozzle diameter within the range considered. The instantaneous velocity profile of the particle flow field in terms of the particle velocity distribution along the axial and radial directions of the jets is discussed. For the axial profile in the jet centerline downstream, there exists an extended acceleration stage, a transition stage, and a deceleration stage. For the radial velocity profiles, a relatively flat shape is observed at a jet cross-section near the nozzle exit. Mathematical models for the particle velocities in the air jet are then developed. It is shown that the results from the models agree well with experimental data in both the variation trend and magnitude.     

An experimental study of two-phase turbulent coaxial jets

The effect of solid particles on the flow structure of axisymmetric turbulent coaxial jets has been studied. A laser-Doppler anemometer was used to measure the mean and fluctuation velocities of both phases, and a Malvern laser diffraction instrument was applied to measure particle size and concentration. A series of velocity ratios and particle loading ratios were investigated, and the results were analysed for the effects of these ratios on the mixing characteristic and the similarity behavior of the jet. The effects of particle diameter and its distribution were also studied as well as their influence on the coaxial jet behavior.     

Optical tomography applied to speckle photographic measurement of asymmetric flows with variable density

Optical tomography is applied to the speckle photographic measurement of an asymmetric flow field with variable fluid density. The convolution back projection algorithm is used for obtaining the 3-D density distribution. Noise in the experimental data is reduced by spline smoothing. The method is verified with a steady, laminar, axisymmetric helium jet exhausting vertically into the ambient air, and then applied to a non-axisymmetric helium jet for determining the helium concentration. It is found that speckle photographic recordings are very adequate for tomographic reconstruction, because they provide a high number of data points from each projection. The influence of the limited number of projections on the reconstruction quality is particularly investigated. Dedicated to Professor Dr.-Ing. J. Zierep on the occasion of his 60th birthday