Structural, optical and photoelectrochemical characterization of CdS nanowire synthesized by chemical bath deposition and wet chemical etching

Nanocrystalline thin films of CdS have been grown onto flexible plastic and titanium substrates by a simple and environmentally benign chemical bath deposition (CBD) method at room temperature. The films consist of clusters of CdS nanoparticles. The clusters of CdS nanoparticles in the films were successfully converted into nanowire (NW) networks using chemical etching process. The possible mechanism of the etching phenomenon is discussed. These films were examined for their structural, surface morphological and optical properties by means of X-ray diffraction (XRD), scanning electron microscopy (SEM), atomic force microscopy (AFM) and UV-vis spectrophotometry techniques, respectively. Photoelectrochemical (PEC) investigations were carried out using cell configuration as n-CdS/(1 M NaOH + 1 M Na₂S + 1 M S)/C. The film of nanowires was found to be hexagonal in structure with the preferential orientation along the (0 0 2) plane. The nanowires have widths in the range of 50-150 nm and have lengths of the order of a few micrometers. Optical studies reveal that the CdS nanowires have value of band gap 2.48 eV, whereas it is 2.58 eV for nanoparticles of CdS. Finally, we report on the ideality of junction improvement of PEC cells when CdS nanoparticles photoelectrode converted into nanowires photoelectrode.     

Effect of substrate texture on the growth of hematite nanowires

The effect of texture of iron foil substrate on the growth of hematite nanowires by annealing method has been investigated in detail. Three substrates of different textures were prepared from a [2 0 0] oriented iron foil by some simple processes. The hematite nanowires on these substrates were synthesized by annealing iron foil at 700 °C in moist oxygen. The growth pattern of nanowires on these substrates showed that the growth of hematite nanowires depends strongly on the iron substrate texture and [1 1 0] oriented iron grains are necessary for their growth. The samples were characterized by Scanning Electron Microscope (SEM), Transmission Electron Microscope (TEM), X-ray diffraction (XRD), Electron Back Scatter Diffraction (EBSD) and Raman Spectroscopy. We have also tried to explain the various observations on the mechanism of growth. Mainly, the presence of water vapor significantly enhanced the formation of hematite nanowires which resulted in a very dense and aligned growth of nanowires on the substrate areas of favorable texture. Finally, the study proved the substrate texture to be a powerful tool to control growth of nanowires and can be used efficiently for patterning and large scale synthesis of the nanowires.     

Synthesis and characterization of GaN nanowires by ammoniating Ga2O3/Cr thin films deposited on Si(1 1 1) substrates

GaN nanowires have been successfully synthesized on Si(1 1 1) substrates by magnetron sputtering through ammoniating Ga₂O₃/Cr thin films at 950 °C. X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), FT-IR spectrophotometer, scanning electron microscopy (SEM), high-resolution transmission electron microscopy (TEM), and photoluminescence (PL) spectrum were carried out to characterize the microstructure, morphology, and optical properties of GaN samples. The results demonstrate that the nanowires are single-crystal GaN with hexagonal wurtzite structure and high-quality crystalline, have the size of 30-80 nm in diameter and several tens of microns in length with good emission properties. The growth direction of GaN nanowires is perpendicular to the fringe of (1 0 1) plane. The growth mechanism of GaN nanowires is also discussed in detail.     

Aligned growth of ZnO nanowires by NAPLD and their optical characterizations

Not only vertically aligned ZnO nanowires but also horizontally aligned ZnO nanowires have been successfully grown on the annealed (0 0 0 1) c-cut and (1 1 2 0) a-cut sapphire substrates, respectively using catalyst-free nanoparticle-assisted pulsed-laser ablation deposition (NAPLD). The as-synthesized ZnO nanowires exhibit an ultraviolet emission at around 390 nm and the absent green emission under room temperature. The single ZnO nanowire was collected in the electrode gap by dielectrophoresis (DEP). Under the optical pumping, the single ZnO nanowire exhibited UV emission at around 390 nm with several sharp peaks whose energy spacings are almost constant, which greatly differs from the broad UV emission of the film with many nanowires, suggesting ZnO nanowires as candidates for laser media. The single ZnO nanowire showed polarized photoluminescence (PL). The as-synthesized ZnO nanowires could find many interesting applications in short-wavelength light-emitting diode (LED), laser diode and gas sensor.     

The effect of substrate surface roughness on ZnO nanostructures growth

The ZnO nanowires have been synthesized using vapor-liquid-solid (VLS) process on Au catalyst thin film deposited on different substrates including Si(1 0 0), epi-Si(1 0 0), quartz and alumina. The influence of surface roughness of different substrates and two different environments (Ar + H₂ and N₂) on formation of ZnO nanostructures was investigated. According to AFM observations, the degree of surface roughness of the different substrates is an important factor to form Au islands for growing ZnO nanostructures (nanowires and nanobelts) with different diameters and lengths. Si substrate (without epi-taxy layer) was found that is the best substrate among Si (with epi-taxy layer), alumina and quartz, for the growth of ZnO nanowires with the uniformly small diameter. Scanning electron microscopy (SEM) reveals that different nanostructures including nanobelts, nanowires and microplates have been synthesized depending on types of substrates and gas flow. Observation by transmission electron microscopy (TEM) reveals that the nanostructures are grown by VLS mechanism. The field emission properties of ZnO nanowires grown on the Si(1 0 0) substrate, in various vacuum gaps, were characterized in a UHV chamber at room temperature. Field emission (FE) characterization shows that the turn-on field and the field enhancement factor (β) decrease and increases, respectively, when the vacuum gap (d) increase from 100 to 300 μm. The turn-on emission field and the enhancement factor of ZnO nanowires are found 10 V/μm and 1183 at the vacuum gap of 300 μm.     

Synthesis of ZnO nanowires by pulsed laser deposition in furnace

ZnO nanowires were fabricated on Au coated (0 0 0 1) sapphire substrates by using a pulsed Nd:YAG laser with a ZnO target in furnace. ZnO nanowires have various sizes and shapes with a different substrate position inside a furnace. The length and the diameter of these ZnO nanowires were around 3-4 μm and 120-200 nm, respectively, confirmed by scanning electron microscopy (SEM). The diameter control of the nanowires was achieved by varying the position of substrates. The ultraviolet emission of nanowires from the near band-edge emission (NBE) was observed at room temperature. The formation mechanism and the effect of different position of substrates on the structural and optical properties of ZnO nanowires are discussed.     

The self-assembly of metallic nanowires

We have demonstrated that nickel adatoms self-assemble into quasi one-dimensional nanowires on vicinal Rh(1 1 1) surfaces by decorating their regular monoatomic step arrays, while V adatoms do not. The step decoration process has been followed experimentally by variable-temperature scanning tunnelling microscopy and high-resolution X-ray photoelectron spectroscopy. The physical origin of the different step-assisted self-assembly behaviour of Ni and V adatoms has been elucidated theoretically and is ascribed to different diffusion barriers and trapping capability of Ni and V at Rh steps.     

Fabrication and magnetic properties of metallic nanowires via AAO templates

Metallic (Ni, Co, Cu and Fe) nanowires were fabricated by electrodeposition into anodic aluminum oxide (AAO) template. In this work, we have studied the effect of the electrode potential on the microstructure and magnetic properties of nanowires. Transmission electron microscopy (TEM) results showed that the metal nanowires were single-crystal. Cu and Ni nanowires had the same orientation along the [2 2 0] direction, while Co had a preferred orientation along the [1 0 0] direction. Fe nanowires had a preferred orientation along the [2 0 0] direction. The growth mechanisms are probably due to the competition growth of the adjacent grains and the confinement of growth in the nano-sized hole of the AAO template. Results showed that single crystal or highly textured nanowires had better magnetic properties compared with that of polycrystal nanowires in terms of coercivity and squareness.     

Synthesis and field emission properties of GaN nanowires

Gallium nitride (GaN) nanowires grown on nickel-coated n-type Si (1 0 0) substrates have been synthesized using chemical vapor deposition (CVD), and the field emission properties of GaN nanowires have been studied. The results show that (1) the grown GaN nanowires, which have diameters in the range of 50-100 nm and lengths of several micrometers, are uniformly distributed on Si substrates. The characteristics of the grown GaN nanowires have been investigated using X-ray diffraction (XRD) and transmission electron microscopy (TEM), and through these investigations it was found that the GaN nanowires are of a good crystalline quality (2) When the emission current density is 100 μA/cm², the necessary electric field is an open electric field of around 9.1 V/μm (at room temperature). The field enhancement factor is ∼730. The field emission properties of GaN nanowires films are related both to the surface roughness and the density of the nanowires in the film.     

Fabrication, morphology, and photoluminescence properties of GaN nanowires and nanorods by ammoniating Ga2O3/V films on Si(1 1 1)

GaN nanowires and nanorods have been successfully synthesized on Si(1 1 1) substrates by magnetron sputtering through ammoniating Ga₂O₃/V films at 900 °C in a quartz tube. X-ray diffraction (XRD), scanning electron microscopy (SEM), high-resolution transmission electron microscopy (HRTEM), X-ray photoelectron spectroscopy (XPS), and photoluminescence (PL) spectrum were carried out to characterize the structure, morphology, and photoluminescence properties of GaN sample. The results show that the GaN nanowires and nanorods with pure hexagonal wurtzite structure have good emission properties. The growth direction of nanostructures is perpendicular to the fringes of (1 0 1) plane. The growth mechanism is also briefly discussed.     

Fabrication and magnetic properties of Ni-Zn nanowire arrays

Ni-Zn nanowire arrays, with diameters of approximately 60 nm and lengths of around 40 μm, were fabricated by electrodeposition in porous anodic aluminum oxide templates at different electric potentials. X-ray diffraction observations demonstrated that the isolated nanowires had polycrystalline structure and that their phases changed with the deposition potential. The amount of deposited zinc in the nanowires increased with the deposition potential, whereas the amount of nickel decreased. Magnetic measurements showed that there was a gradual change of magnetism from isotropic to anistropic with increasing potential amplitude and that the coercivity reached a maximum value in the nanowire deposited at −1.35 V.     

Catalyst-free synthesis of novel brush-shaped ZnO particles by a simple oxidation in air

Brush-shaped ZnO particles were synthesized by controlling the growth time in the direct melt oxidation process of Al-Zn mixture in air at atmospheric pressure. Particles with two kinds of structures were formed. One was consisted of nanowires grown along [0 0 0 1] direction at the six corners and the center of (0 0 0 1) basal plane on hexagonal ZnO microrod. The other was constructed by nanobelts between the corner-nanowires as well as nanowires at the corners on ZnO microrod. The structural configuration that the nanowires and the nanobelts have a well coherent orientation alignment with the base microrod implies that the brush-shaped ZnO is single crystal. Room temperature PL spectrum of the brush-shaped ZnO particles displayed predominant green emission with a wavelength of 510 nm.     

Orientation-controlled synthesis and magnetism of single crystalline Co nanowires

Orientation control and the magnetic properties of single crystalline Co nanowires fabricated by electrodeposition have been systematically investigated. It is found that the orientation of Co nanowires can be effectively controlled by varying either the current density or the pore diameter of AAO templates. Lower current density or small diameter is favorable for forming the (1 0 0) texture, while higher current values or larger diameter leads to the emergence and enhancement of (1 1 0) texture of Co nanowires. The mechanism for the manipulated growth characterization is discussed in detail. The orientation of Co nanowires has a significant influence on the magnetic properties, resulting from the competition between the magneto-crystalline and shape anisotropy of Co nanowires. This work offers a simple method to manipulate the orientation and magnetic properties of nanowires for future applications.     

Synthesis of anatase TiO2 nanowires by modifying TiO2 nanoparticles using the microwave heating method

Anatase TiO₂ nanowires with a diameter of 5-10 nm and length of 500 nm to 2 μm have been successfully synthesized by modifying TiO₂ nanoparticles (P25) using the microwave heating method. The microwave power, reaction pressure, and reaction time for the synthesis of TiO₂ nanowires were 500 W, 0.5-3.0 MPa (corresponding to a temperature range of 175-260), and 40-70 min, respectively. X-ray diffraction (XRD), field-emission scanning electron microscopy (SEM), high-resolution transmission electron microscopy (HRTEM), and the BET techniques were used to investigate the phase structures, morphologies, and specific surface areas of the TiO₂ nanowires. The effects of reaction time, pressure, and different post-treatment processes on the microstructures of TiO₂ nanowires were discussed. It has been shown that the microwave heating method is efficient in transforming TiO₂ nanoparticles to anatase TiO₂ nanowires.     

Diffusion and binding of CO on Pt nanowires

The diffusion and binding of CO molecules on self organized Pt nanowires on Ge(0 0 1), have been studied by room temperature scanning tunneling microscopy. CO molecules are found to bind at the bridge position of the Pt dimers. The CO molecules are mobile at room temperature and perform an “unrestricted” one-dimensional random walk in defect-free regions of the Pt nanowires.     

Etching of silicon nanowires on Ag(1 1 0) by atomic hydrogen

Scanning Tunnelling Microscopy, High Resolution Electron Energy Loss Spectroscopy and High Resolution X-Ray Photoelectron Spectroscopy have been used to study the adsorption of atomic hydrogen onto Si nanowires grown on Ag(1 1 0). We demonstrate that the hydrogen strongly interacts with the Si nanowires modifying their structural and electronic properties. Hydrogen atoms etch the Si nanowires and eventually lead to their complete removal from the Ag(1 1 0) surface.     

A new large – Scale synthesis of magnesium oxide nanowires: Structural and antibacterial properties

Large-scale one-dimensional magnesium oxide (MgO) nanowires with diameters of 6 nm and lengths of 10 μm have been successfully synthesized by a new facile and simple reaction. This production was performed via a microwave hydrothermal approach at low temperature growth of 180 °C for 30 min. The structure of as synthesized MgO nanowires were investigated by means of X-ray diffraction (X-ray), Fourier Transformation Infrared Spectroscopy (FTIR), Field Emission Scanning Electron Microscopy (FE-SEM), Transmission Electron Microscopy (TEM), Selected Area Electron Diffraction (SAED) and Energy Dispersive X-ray (EDS). The antibacterial behavior of MgO nanowires concentration in solid media against Gram negative and Gram positive for different bacteria has been tested in details. The results show that the MgO nanowires have bacteriostatic activity against Escherichia coli and Bacillus sp. The antibacterial activity increases with increasing MgO nanowires concentration. Furthermore, the presence of one-dimensional MgO nanowires has high antibacterial efficacy and damages the membrane wall of bacteria. Finally, this study offered the prospect of developing ultrafine nanoscale devices utilizing MgO nanowires and implementing their useful potential in biological control.     

Effect of surface roughness on nucleation and growth of vanadium pentoxide nanowires

The effect of surface roughness on subsequent growth of vanadium pentoxide (V₂O₅) nanowires is examined. With increasing surface roughness, both the number density and aspect ratio of V₂O₅ nanowires increase. Structures and morphology of obtained nanowires were characterized by field emission scanning electron microscopy (FE-SEM) and X-ray diffraction (XRD). The nanowires are approximately 40-90 nm in diameter and 2 μm in length. X-ray diffraction (XRD) analysis indicates that the obtained nanowires are orthorhombic structure with (0 0 1) out-of-plane orientation. The luminescence property of V₂O₅ nanowires has been investigated by photoluminescence (PL) at 150 K and 300 K. PL results show intense visible emission, which is attributed to different inter-band transitions between the V 3d and O 2p band. This simple fabrication approach might be useful for fabrication of large area V₂O₅ nanowires arrays with high density.     

A comparison between optical properties of TiO2 nanowires obtained by EMA method and experiment

Optical properties of TiO₂ nanowires, synthesized by two-step thermal evaporation process, have been studied experimentally and theoretically. Based on the theoretical method optical constants of nanowires have been calculated with the use of the effective medium approximation (EMA). As evidenced by X-ray diffraction patterns our synthesized nanowires, whose diameters and lengths were within the ranges of 50-90 nm and 500-1500 nm, respectively, were found to be crystalline rutile TiO₂ with the major refraction being along the (1 1 0) direction. The experimental data of the reflectance of TiO₂ nanowires has been obtained using spectrometer in wavelength 250-800 nm, and then, compared with the spectrum of reflectance predicted by the EMA theoretical model. Our measured experimental optical data has been found to be in good accord with our predicted results spectrum with the use of the EMA modeling; this agreement indicates that our estimation of the volume fraction from atomic force microscopy (AFM) data was accurate.     

Synthesis process of nanowired Al/CuO thermite

Al/CuO nanothermites were fabricated by thermal oxidation of copper layer at 450 °C for 5 h and by aluminum thermal evaporation: thermal evaporation allows producing thin layer less than 2 μm in size. The copper has been deposited by electroplating or thermal evaporation depending on the required thickness. The obtained diameter of Al/CuO nanowires is 150-250 nm. Al/CuO nanowires composite were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), differential scanning calorimetry (DSC) and differential thermal analysis (DTA). Two distinct exothermic reactions occurred at 515 and 667 °C and total energy release of this thermite is 10 kJ/cm³.